Skip to contentSkip to conversation

mac80211/cfg80211 BSS handling improvements

PATCH In review Johannes Berg 2 participants 7 messages Feb 7, 2009 – Feb 10, 2009

Subsystems (2)
lore
Share & tools
lore

Johannes Berg

author maintainer
#0 lore raw

cover mac80211/cfg80211 BSS handling improvements

This is my previous RFC series, now split up by functionality and with proper changelogs.

johannes

author maintainer
#1 lore raw

PATCH 1/4 mac80211: dont add BSS when creating IBSS

There's no need to create a BSS struct only to pass it to ieee80211_sta_join_ibss, so refactor this function into __ieee80211_sta_join_ibss which takes all the relevant paramters, and ieee80211_sta_join_ibss which takes a BSS struct (used when joining an IBSS that already has other members).

---
 net/mac80211/ieee80211_i.h |    3 -
 net/mac80211/mlme.c        |  107 ++++++++++++++++++++++++---------------------
 net/mac80211/scan.c        |    8 ---
 3 files changed, 60 insertions(+), 58 deletions(-)
net/mac80211/mlme.c +58 -49
@@ -513,14 +513,15 @@ static void ieee80211_send_deauth_disass
 
 /* MLME */
 static void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata,
-					 struct ieee80211_bss *bss)
+					 const size_t supp_rates_len,
+					 const u8 *supp_rates)
 {
 	struct ieee80211_local *local = sdata->local;
 	int i, have_higher_than_11mbit = 0;
 
 	/* cf. IEEE 802.11 9.2.12 */
-	for (i = 0; i < bss->supp_rates_len; i++)
-		if ((bss->supp_rates[i] & 0x7f) * 5 > 110)
+	for (i = 0; i < supp_rates_len; i++)
+		if ((supp_rates[i] & 0x7f) * 5 > 110)
 			have_higher_than_11mbit = 1;
 
 	if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ &&
@@ -1516,9 +1517,13 @@ static void ieee80211_rx_mgmt_assoc_resp
 }
 
 
-static int ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
-				   struct ieee80211_if_sta *ifsta,
-				   struct ieee80211_bss *bss)
+static int __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
+				     struct ieee80211_if_sta *ifsta,
+				     const u8 *bssid, const int beacon_int,
+				     const int freq,
+				     const size_t supp_rates_len,
+				     const u8 *supp_rates,
+				     const u16 capability)
 {
 	struct ieee80211_local *local = sdata->local;
 	int res = 0, rates, i, j;
@@ -1534,7 +1539,7 @@ static int ieee80211_sta_join_ibss(struc
 	}
 
 	if ((ifsta->flags & IEEE80211_STA_PREV_BSSID_SET) &&
-	   memcmp(ifsta->bssid, bss->bssid, ETH_ALEN) == 0)
+	   memcmp(ifsta->bssid, bssid, ETH_ALEN) == 0)
 		return res;
 
 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400 +
@@ -1545,28 +1550,28 @@ static int ieee80211_sta_join_ibss(struc
 		return -ENOMEM;
 	}
 
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
 	if (!(ifsta->flags & IEEE80211_STA_PREV_BSSID_SET)) {
 		/* Remove possible STA entries from other IBSS networks. */
 		sta_info_flush_delayed(sdata);
 	}
 
-	memcpy(ifsta->bssid, bss->bssid, ETH_ALEN);
+	memcpy(ifsta->bssid, bssid, ETH_ALEN);
 	res = ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID);
 	if (res)
 		return res;
 
-	local->hw.conf.beacon_int = bss->beacon_int >= 10 ? bss->beacon_int : 10;
+	local->hw.conf.beacon_int = beacon_int >= 10 ? beacon_int : 10;
 
-	sdata->drop_unencrypted = bss->capability &
+	sdata->drop_unencrypted = capability &
 		WLAN_CAPABILITY_PRIVACY ? 1 : 0;
 
-	res = ieee80211_set_freq(sdata, bss->freq);
+	res = ieee80211_set_freq(sdata, freq);
 
 	if (res)
 		return res;
 
+	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
 	/* Build IBSS probe response */
 
 	skb_reserve(skb, local->hw.extra_tx_headroom);
@@ -1575,33 +1580,32 @@ static int ieee80211_sta_join_ibss(struc
 		skb_put(skb, 24 + sizeof(mgmt->u.beacon));
 	memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon));
 	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
-						IEEE80211_STYPE_PROBE_RESP);
+					  IEEE80211_STYPE_PROBE_RESP);
 	memset(mgmt->da, 0xff, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
 	memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
 	mgmt->u.beacon.beacon_int =
 		cpu_to_le16(local->hw.conf.beacon_int);
-	mgmt->u.beacon.timestamp = cpu_to_le64(bss->timestamp);
-	mgmt->u.beacon.capab_info = cpu_to_le16(bss->capability);
+	mgmt->u.beacon.capab_info = cpu_to_le16(capability);
 
 	pos = skb_put(skb, 2 + ifsta->ssid_len);
 	*pos++ = WLAN_EID_SSID;
 	*pos++ = ifsta->ssid_len;
 	memcpy(pos, ifsta->ssid, ifsta->ssid_len);
 
-	rates = bss->supp_rates_len;
+	rates = supp_rates_len;
 	if (rates > 8)
 		rates = 8;
 	pos = skb_put(skb, 2 + rates);
 	*pos++ = WLAN_EID_SUPP_RATES;
 	*pos++ = rates;
-	memcpy(pos, bss->supp_rates, rates);
+	memcpy(pos, supp_rates, rates);
 
-	if (bss->band == IEEE80211_BAND_2GHZ) {
+	if (sband->band == IEEE80211_BAND_2GHZ) {
 		pos = skb_put(skb, 2 + 1);
 		*pos++ = WLAN_EID_DS_PARAMS;
 		*pos++ = 1;
-		*pos++ = ieee80211_frequency_to_channel(bss->freq);
+		*pos++ = ieee80211_frequency_to_channel(freq);
 	}
 
 	pos = skb_put(skb, 2 + 2);
@@ -1611,12 +1615,12 @@ static int ieee80211_sta_join_ibss(struc
 	*pos++ = 0;
 	*pos++ = 0;
 
-	if (bss->supp_rates_len > 8) {
-		rates = bss->supp_rates_len - 8;
+	if (supp_rates_len > 8) {
+		rates = supp_rates_len - 8;
 		pos = skb_put(skb, 2 + rates);
 		*pos++ = WLAN_EID_EXT_SUPP_RATES;
 		*pos++ = rates;
-		memcpy(pos, &bss->supp_rates[8], rates);
+		memcpy(pos, &supp_rates[8], rates);
 	}
 
 	add_extra_ies(skb, sdata->u.sta.ie_proberesp,
@@ -1629,16 +1633,15 @@ static int ieee80211_sta_join_ibss(struc
 
 
 	rates = 0;
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-	for (i = 0; i < bss->supp_rates_len; i++) {
-		int bitrate = (bss->supp_rates[i] & 0x7f) * 5;
+	for (i = 0; i < supp_rates_len; i++) {
+		int bitrate = (supp_rates[i] & 0x7f) * 5;
 		for (j = 0; j < sband->n_bitrates; j++)
 			if (sband->bitrates[j].bitrate == bitrate)
 				rates |= BIT(j);
 	}
 	ifsta->supp_rates_bits[local->hw.conf.channel->band] = rates;
 
-	ieee80211_sta_def_wmm_params(sdata, bss);
+	ieee80211_sta_def_wmm_params(sdata, supp_rates_len, supp_rates);
 
 	ifsta->flags |= IEEE80211_STA_PREV_BSSID_SET;
 	ifsta->state = IEEE80211_STA_MLME_IBSS_JOINED;
@@ -1647,12 +1650,23 @@ static int ieee80211_sta_join_ibss(struc
 	ieee80211_led_assoc(local, true);
 
 	memset(&wrqu, 0, sizeof(wrqu));
-	memcpy(wrqu.ap_addr.sa_data, bss->bssid, ETH_ALEN);
+	memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
 	wireless_send_event(sdata->dev, SIOCGIWAP, &wrqu, NULL);
 
 	return res;
 }
 
+static int ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
+				   struct ieee80211_if_sta *ifsta,
+				   struct ieee80211_bss *bss)
+{
+	return __ieee80211_sta_join_ibss(sdata, ifsta,
+					 bss->bssid, bss->beacon_int,
+					 bss->freq,
+					 bss->supp_rates_len, bss->supp_rates,
+					 bss->capability);
+}
+
 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 				  struct ieee80211_mgmt *mgmt,
 				  size_t len,
@@ -2206,11 +2220,12 @@ static int ieee80211_sta_create_ibss(str
 				     struct ieee80211_if_sta *ifsta)
 {
 	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_bss *bss;
 	struct ieee80211_supported_band *sband;
-	u8 bssid[ETH_ALEN], *pos;
+	u8 *pos;
+	u8 bssid[ETH_ALEN];
+	u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
+	u16 capability;
 	int i;
-	int ret;
 
 	if (sdata->u.sta.flags & IEEE80211_STA_BSSID_SET) {
 		memcpy(bssid, ifsta->bssid, ETH_ALEN);
@@ -2228,36 +2243,29 @@ static int ieee80211_sta_create_ibss(str
 	printk(KERN_DEBUG "%s: Creating new IBSS network, BSSID %pM\n",
 	       sdata->dev->name, bssid);
 
-	bss = ieee80211_rx_bss_add(local, bssid,
-				   local->hw.conf.channel->center_freq,
-				   sdata->u.sta.ssid, sdata->u.sta.ssid_len);
-	if (!bss)
-		return -ENOMEM;
-
-	bss->band = local->hw.conf.channel->band;
-	sband = local->hw.wiphy->bands[bss->band];
+	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 
 	if (local->hw.conf.beacon_int == 0)
 		local->hw.conf.beacon_int = 100;
-	bss->beacon_int = local->hw.conf.beacon_int;
-	bss->last_update = jiffies;
-	bss->capability = WLAN_CAPABILITY_IBSS;
+
+	capability = WLAN_CAPABILITY_IBSS;
 
 	if (sdata->default_key)
-		bss->capability |= WLAN_CAPABILITY_PRIVACY;
+		capability |= WLAN_CAPABILITY_PRIVACY;
 	else
 		sdata->drop_unencrypted = 0;
 
-	bss->supp_rates_len = sband->n_bitrates;
-	pos = bss->supp_rates;
+	pos = supp_rates;
 	for (i = 0; i < sband->n_bitrates; i++) {
 		int rate = sband->bitrates[i].bitrate;
 		*pos++ = (u8) (rate / 5);
 	}
 
-	ret = ieee80211_sta_join_ibss(sdata, ifsta, bss);
-	ieee80211_rx_bss_put(local, bss);
-	return ret;
+	return __ieee80211_sta_join_ibss(sdata, ifsta,
+					 bssid, local->hw.conf.beacon_int,
+					 local->hw.conf.channel->center_freq,
+					 sband->n_bitrates, supp_rates,
+					 capability);
 }
 
 
@@ -2426,7 +2434,8 @@ static int ieee80211_sta_config_auth(str
 			ieee80211_sta_set_ssid(sdata, selected->ssid,
 					       selected->ssid_len);
 		ieee80211_sta_set_bssid(sdata, selected->bssid);
-		ieee80211_sta_def_wmm_params(sdata, selected);
+		ieee80211_sta_def_wmm_params(sdata, selected->supp_rates_len,
+						    selected->supp_rates);
 		if (sdata->u.sta.mfp == IEEE80211_MFP_REQUIRED)
 			sdata->u.sta.flags |= IEEE80211_STA_MFP_ENABLED;
 		else
net/mac80211/scan.c +2 -6
@@ -14,11 +14,7 @@
 
 /* TODO:
  * figure out how to avoid that the "current BSS" expires
- * clean up IBSS code (in MLME), see why it adds a BSS to the list
- * use cfg80211's BSS handling (depends on IBSS TODO above)
- * order BSS list by RSSI(?) ("quality of AP")
- * scan result table filtering (by capability (privacy, IBSS/BSS, WPA/RSN IE,
- *    SSID)
+ * use cfg80211's BSS handling
  */
 
 #include <linux/wireless.h>
@@ -107,7 +103,7 @@ static void __ieee80211_rx_bss_hash_del(
 	}
 }
 
-struct ieee80211_bss *
+static struct ieee80211_bss *
 ieee80211_rx_bss_add(struct ieee80211_local *local, u8 *bssid, int freq,
 		     u8 *ssid, u8 ssid_len)
 {
net/mac80211/ieee80211_i.h +0 -3
@@ -954,9 +954,6 @@ ieee80211_bss_info_update(struct ieee802
 			  struct ieee80211_channel *channel,
 			  bool beacon);
 struct ieee80211_bss *
-ieee80211_rx_bss_add(struct ieee80211_local *local, u8 *bssid, int freq,
-		     u8 *ssid, u8 ssid_len);
-struct ieee80211_bss *
 ieee80211_rx_bss_get(struct ieee80211_local *local, u8 *bssid, int freq,
 		     u8 *ssid, u8 ssid_len);
 void ieee80211_rx_bss_put(struct ieee80211_local *local,
author maintainer
#3 lore raw

PATCH 2/4 cfg80211: free_priv for BSS info

In reply to Johannes Berg

When cfg80211 users have their own allocated data in the per-BSS private data, they will need to free this when the BSS struct is destroyed. Add a free_priv method and fix one place where the BSS was kfree'd rather than released properly.

---
 include/net/cfg80211.h |    2 ++
 net/wireless/core.c    |    2 +-
 net/wireless/scan.c    |    2 ++
 3 files changed, 5 insertions(+), 1 deletion(-)
include/net/cfg80211.h +2 -0
@@ -567,6 +567,7 @@ enum cfg80211_signal_type {
  * @len_information_elements: total length of the information elements
  * @signal: signal strength value
  * @signal_type: signal type
+ * @free_priv: function pointer to free private data
  * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
  */
 struct cfg80211_bss {
@@ -582,6 +583,7 @@ struct cfg80211_bss {
 	s32 signal;
 	enum cfg80211_signal_type signal_type;
 
+	void (*free_priv)(struct cfg80211_bss *bss);
 	u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
 };
 
net/wireless/scan.c +2 -0
@@ -56,6 +56,8 @@ static void bss_release(struct kref *ref
 	struct cfg80211_internal_bss *bss;
 
 	bss = container_of(ref, struct cfg80211_internal_bss, ref);
+	if (bss->pub.free_priv)
+		bss->pub.free_priv(&bss->pub);
 	kfree(bss);
 }
 
net/wireless/core.c +1 -1
@@ -376,7 +376,7 @@ void cfg80211_dev_free(struct cfg80211_r
 	mutex_destroy(&drv->mtx);
 	mutex_destroy(&drv->devlist_mtx);
 	list_for_each_entry_safe(scan, tmp, &drv->bss_list, list)
-		kfree(scan);
+		cfg80211_put_bss(&scan->pub);
 	kfree(drv);
 }
 
author maintainer
#4 lore raw

PATCH 3/4 cfg80211: add more flexible BSS lookup

In reply to Johannes Berg

Add a more flexible BSS lookup function so that mac80211 or other drivers can actually use this for getting the BSS to connect to.

---
 include/net/cfg80211.h |   12 +++++++++++-
 net/wireless/scan.c    |   10 ++++++++--
 2 files changed, 19 insertions(+), 3 deletions(-)
include/net/cfg80211.h +11 -1
@@ -785,7 +785,17 @@ cfg80211_inform_bss_frame(struct wiphy *
 struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
 				      struct ieee80211_channel *channel,
 				      const u8 *bssid,
-				      const u8 *ssid, size_t ssid_len);
+				      const u8 *ssid, size_t ssid_len,
+				      u16 capa_mask, u16 capa_val);
+static inline struct cfg80211_bss *
+cfg80211_get_ibss(struct wiphy *wiphy,
+		  struct ieee80211_channel *channel,
+		  const u8 *ssid, size_t ssid_len)
+{
+	return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len,
+				WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
+}
+
 struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
 				       struct ieee80211_channel *channel,
 				       const u8 *meshid, size_t meshidlen,
net/wireless/scan.c +8 -2
@@ -116,9 +116,12 @@ static bool is_bss(struct cfg80211_bss *
 {
 	const u8 *ssidie;
 
-	if (compare_ether_addr(a->bssid, bssid))
+	if (bssid && compare_ether_addr(a->bssid, bssid))
 		return false;
 
+	if (!ssid)
+		return true;
+
 	ssidie = find_ie(WLAN_EID_SSID,
 			 a->information_elements,
 			 a->len_information_elements);
@@ -199,7 +202,8 @@ static int cmp_bss(struct cfg80211_bss *
 struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
 				      struct ieee80211_channel *channel,
 				      const u8 *bssid,
-				      const u8 *ssid, size_t ssid_len)
+				      const u8 *ssid, size_t ssid_len,
+				      u16 capa_mask, u16 capa_val)
 {
 	struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy);
 	struct cfg80211_internal_bss *bss, *res = NULL;
@@ -207,6 +211,8 @@ struct cfg80211_bss *cfg80211_get_bss(st
 	spin_lock_bh(&dev->bss_lock);
 
 	list_for_each_entry(bss, &dev->bss_list, list) {
+		if ((bss->pub.capability & capa_mask) != capa_val)
+			continue;
 		if (channel && bss->pub.channel != channel)
 			continue;
 		if (is_bss(&bss->pub, bssid, ssid, ssid_len)) {
author maintainer
#5 lore raw

PATCH 4/4 mac80211: use cfg80211s BSS infrastructure

In reply to Johannes Berg

Remove all the code from mac80211 to keep track of BSSes and use the cfg80211-provided code completely.

---
 net/mac80211/ieee80211_i.h |   42 ++-----
 net/mac80211/main.c        |    6 -
 net/mac80211/mesh.c        |   10 -
 net/mac80211/mesh.h        |    1 
 net/mac80211/mlme.c        |  211 ++++++++++++-------------------------
 net/mac80211/scan.c        |  255 +++------------------------------------------
 net/mac80211/spectmgmt.c   |    7 -
 7 files changed, 114 insertions(+), 418 deletions(-)
net/mac80211/ieee80211_i.h +15 -27
@@ -72,43 +72,36 @@ struct ieee80211_fragment_entry {
 
 
 struct ieee80211_bss {
-	struct list_head list;
-	struct ieee80211_bss *hnext;
-	size_t ssid_len;
+	/* Yes, this is a hack */
+	struct cfg80211_bss cbss;
 
-	atomic_t users;
-
-	u8 bssid[ETH_ALEN];
+	/* don't want to look up all the time */
+	size_t ssid_len;
 	u8 ssid[IEEE80211_MAX_SSID_LEN];
+
 	u8 dtim_period;
-	u16 capability; /* host byte order */
-	enum ieee80211_band band;
-	int freq;
-	int signal, noise, qual;
-	u8 *ies; /* all information elements from the last Beacon or Probe
-		  * Response frames; note Beacon frame is not allowed to
-		  * override values from Probe Response */
-	size_t ies_len;
+
 	bool wmm_used;
+
+	unsigned long last_probe_resp;
+
 #ifdef CONFIG_MAC80211_MESH
 	u8 *mesh_id;
 	size_t mesh_id_len;
 	u8 *mesh_cfg;
 #endif
+
 #define IEEE80211_MAX_SUPP_RATES 32
 	u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
 	size_t supp_rates_len;
-	u64 timestamp;
-	int beacon_int;
 
-	unsigned long last_probe_resp;
-	unsigned long last_update;
-
-	/* during assocation, we save an ERP value from a probe response so
+	/*
+	 * During assocation, we save an ERP value from a probe response so
 	 * that we can feed ERP info to the driver when handling the
 	 * association completes. these fields probably won't be up-to-date
-	 * otherwise, you probably don't want to use them. */
-	int has_erp_value;
+	 * otherwise, you probably don't want to use them.
+	 */
+	bool has_erp_value;
 	u8 erp_value;
 };
 
@@ -672,9 +665,6 @@ struct ieee80211_local {
 	struct ieee80211_sub_if_data *scan_sdata;
 	enum nl80211_channel_type oper_channel_type;
 	struct ieee80211_channel *oper_channel, *csa_channel;
-	struct list_head bss_list;
-	struct ieee80211_bss *bss_hash[STA_HASH_SIZE];
-	spinlock_t bss_lock;
 
 	/* SNMP counters */
 	/* dot11CountersTable */
@@ -937,8 +927,6 @@ ieee80211_rx_result
 ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata,
 		  struct sk_buff *skb,
 		  struct ieee80211_rx_status *rx_status);
-void ieee80211_rx_bss_list_init(struct ieee80211_local *local);
-void ieee80211_rx_bss_list_deinit(struct ieee80211_local *local);
 int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata,
 			       char *ie, size_t len);
 
net/mac80211/main.c +3 -3
@@ -732,6 +732,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(
 
 	wiphy->privid = mac80211_wiphy_privid;
 	wiphy->max_scan_ssids = 4;
+	/* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
+	wiphy->bss_priv_size = sizeof(struct ieee80211_bss) -
+			       sizeof(struct cfg80211_bss);
 
 	local = wiphy_priv(wiphy);
 	local->hw.wiphy = wiphy;
@@ -880,8 +883,6 @@ int ieee80211_register_hw(struct ieee802
 	mpriv->local = local;
 	local->mdev = mdev;
 
-	ieee80211_rx_bss_list_init(local);
-
 	local->hw.workqueue =
 		create_singlethread_workqueue(wiphy_name(local->hw.wiphy));
 	if (!local->hw.workqueue) {
@@ -1021,7 +1022,6 @@ void ieee80211_unregister_hw(struct ieee
 
 	rtnl_unlock();
 
-	ieee80211_rx_bss_list_deinit(local);
 	ieee80211_clear_tx_pending(local);
 	sta_info_stop(local);
 	rate_control_deinitialize(local);
net/mac80211/scan.c +19 -236

317 lines not on this page · raw message

net/mac80211/mlme.c +72 -139

329 lines not on this page · raw message

net/mac80211/spectmgmt.c +5 -2
@@ -102,8 +102,9 @@ void ieee80211_chswitch_work(struct work
 		goto exit;
 
 	sdata->local->oper_channel = sdata->local->csa_channel;
+	/* XXX: shouldn't really modify cfg80211-owned data! */
 	if (!ieee80211_hw_config(sdata->local, IEEE80211_CONF_CHANGE_CHANNEL))
-		bss->freq = sdata->local->oper_channel->center_freq;
+		bss->cbss.channel = sdata->local->oper_channel;
 
 	ieee80211_rx_bss_put(sdata->local, bss);
 exit:
@@ -158,7 +159,9 @@ void ieee80211_process_chanswitch(struct
 						IEEE80211_QUEUE_STOP_REASON_CSA);
 		ifsta->flags |= IEEE80211_STA_CSA_RECEIVED;
 		mod_timer(&ifsta->chswitch_timer,
-			  jiffies + msecs_to_jiffies(sw_elem->count * bss->beacon_int));
+			  jiffies +
+			  msecs_to_jiffies(sw_elem->count *
+					   bss->cbss.beacon_interval));
 	}
 }
 
net/mac80211/mesh.c +0 -10
@@ -275,16 +275,6 @@ u32 mesh_table_hash(u8 *addr, struct iee
 		& tbl->hash_mask;
 }
 
-u8 mesh_id_hash(u8 *mesh_id, int mesh_id_len)
-{
-	if (!mesh_id_len)
-		return 1;
-	else if (mesh_id_len == 1)
-		return (u8) mesh_id[0];
-	else
-		return (u8) (mesh_id[0] + 2 * mesh_id[1]);
-}
-
 struct mesh_table *mesh_table_alloc(int size_order)
 {
 	int i;
net/mac80211/mesh.h +0 -1
@@ -196,7 +196,6 @@ struct mesh_rmc {
 
 /* Public interfaces */
 /* Various */
-u8 mesh_id_hash(u8 *mesh_id, int mesh_id_len);
 int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
 int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
 		struct ieee80211_sub_if_data *sdata);
#2 lore raw

Re: [PATCH 1/4] mac80211: dont add BSS when creating IBSS

In reply to Johannes Berg

Hello Johannes!

Quoted 3 lines

There's no need to create a BSS struct only to pass it to ieee80211_sta_join_ibss, so refactor this function into __ieee80211_sta_join_ibss

I think the use of the internal prefix "__" is a little deceptive in th= is case. But this is only cosmetic.

Regards
Alina

--=20
Jetzt 1 Monat kostenlos! GMX FreeDSL - Telefonanschluss + DSL=20 f=FCr nur 17,95 Euro/mtl.!* http://dsl.gmx.de/?ac=3DOM.AD.PD003K11308T4=
569a
--
To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author maintainer
#6 lore raw

Re: [PATCH 4/4] mac80211: use cfg80211s BSS infrastructure

In reply to Johannes Berg
Quoted 4 lines · Johannes Berg

plain text document attachment (027-mac80211-use-cfg80211-bss-infrastructure.patch) Remove all the code from mac80211 to keep track of BSSes and use the cfg80211-provided code completely.

This patch is buggy. It can cause a kref leak and then oops.

johannes