Skip to contentSkip to conversation

fpga: Fix Spartan II FPGA booting

PATCH New Matthias Fuchs 2 participants 2 messages Feb 15, 2009 – Feb 21, 2009 FPGA manager framework

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 fpga: Fix Spartan II FPGA booting

This patch does some minor fixing of the Xilinx Spartan II FPGA boot code:

- Fixed call order of post configuration callback and success message printing (result of copy-paste?)
- relocate post configuration callback only when it is implemented
- remove obsolete comment
- minor coding style cleanup

---
 drivers/fpga/spartan2.c |   32 +++++++++++---------------------
 1 files changed, 11 insertions(+), 21 deletions(-)
drivers/fpga/spartan2.c +11 -21
index f5ba7fc..d745334 100644
@@ -260,8 +260,6 @@ static int Spartan2_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		ts = get_timer (0);		/* get current time */
 		ret_val = FPGA_SUCCESS;
 		while ((*fn->done) (cookie) == FPGA_FAIL) {
-			/* XXX - we should have a check in here somewhere to
-			 * make sure we aren't busy forever... */
 
 			CONFIG_FPGA_DELAY ();
 			(*fn->clk) (FALSE, TRUE, cookie);	/* Deassert the clock pin */
@@ -276,23 +274,18 @@ static int Spartan2_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			}
 		}
 
-		if (ret_val == FPGA_SUCCESS) {
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-			puts ("Done.\n");
-#endif
-		}
 		/*
 		 * Run the post configuration function if there is one.
 		 */
-		if (*fn->post) {
+		if (*fn->post)
 			(*fn->post) (cookie);
-		}
 
-		else {
 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
+		if (ret_val == FPGA_SUCCESS)
+			puts ("Done.\n");
+		else
 			puts ("Fail.\n");
 #endif
-		}
 
 	} else {
 		printf ("%s: NULL Interface function table!\n", __FUNCTION__);
@@ -412,8 +405,10 @@ static int Spartan2_sp_reloc (Xilinx_desc * desc, ulong reloc_offset)
 			addr = (ulong) (fn->abort) + reloc_offset;
 			fn_r->abort = (Xilinx_abort_fn) addr;
 
-			addr = (ulong) (fn->post) + reloc_offset;
-			fn_r->post = (Xilinx_post_fn) addr;
+			if (fn->post) {
+				addr = (ulong) (fn->post) + reloc_offset;
+				fn_r->post = (Xilinx_post_fn) addr;
+			}
 
 			fn_r->relocated = TRUE;
 
@@ -541,8 +536,6 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		(*fn->wr) (TRUE, TRUE, cookie);
 
 		while (! (*fn->done) (cookie)) {
-			/* XXX - we should have a check in here somewhere to
-			 * make sure we aren't busy forever... */
 
 			CONFIG_FPGA_DELAY ();
 			(*fn->clk) (FALSE, TRUE, cookie);	/* Deassert the clock pin */
@@ -562,17 +555,14 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		/*
 		 * Run the post configuration function if there is one.
 		 */
-		if (*fn->post) {
+		if (*fn->post)
 			(*fn->post) (cookie);
-		}
 
 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-		if (ret_val == FPGA_SUCCESS) {
+		if (ret_val == FPGA_SUCCESS)
 			puts ("Done.\n");
-		}
-		else {
+		else
 			puts ("Fail.\n");
-		}
 #endif
 
 	} else {
Signature · 1 line
1.5.6.3
#1 lore raw

PATCH 1/1 fpga: Fix Spartan II FPGA booting

Dear Matthias Fuchs,

Quoted 10 lines · In message <[email protected]> you wrote:

This patch does some minor fixing of the Xilinx Spartan II FPGA boot code:

- Fixed call order of post configuration callback and success message printing (result of copy-paste?)
- relocate post configuration callback only when it is implemented
- remove obsolete comment
- minor coding style cleanup

Quoted 4 lines
---
 drivers/fpga/spartan2.c |   32 +++++++++++---------------------
 1 files changed, 11 insertions(+), 21 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I paid too much for it, but its worth it.