PXA build failure
Hi, all!
I am used to build at91 board using Angstrom EABI toolchain (gcc-4.2.4) without any problems. Now I try to build PXA board and have the following error on final link stage: (I build master branch)
cd /home/slapin/u-boot && ~/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld -Bstatic -T /home/slapin/u-boot/board/pxa255_idp/u-boot.lds -Ttext 0xa3080000 $UNDEF_SYM cpu/pxa/start.o \ --start-group lib_generic/libgeneric.a lib_generic/lzma/liblzma.a cpu/pxa/libpxa.a lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a net/libnet.a disk/libdisk.a drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a drivers/dma/libdma.a drivers/fpga/libfpga.a drivers/gpio/libgpio.a drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a drivers/input/libinput.a drivers/misc/libmisc.a drivers/mmc/libmmc.a drivers/mtd/libmtd.a drivers/mtd/nand/libnand.a drivers/mtd/nand_legacy/libnand_legacy.a drivers/mtd/onenand/libonenand.a drivers/mtd/ubi/libubi.a drivers/mtd/spi/libspi_flash.a drivers/net/libnet.a drivers/net/phy/libphy.a drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a common/libcommon.a libfdt/libfdt.a api/libapi.a post/libpost.a board/pxa255_idp/libpxa255_idp.a --end-group -L /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4 -lgcc \ -Map u-boot.map -o u-boot
/home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivsi3.o): In function `__aeabi_uidiv':/home/slapin/openedhand/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.4-r3/gcc-4.2.4/gcc/config/arm/lib1funcs.asm:730: multiple definition of `__udivsi3' lib_arm/libarm.a(_udivsi3.o):/home/slapin/u-boot/lib_arm/_udivsi3.S:17: first defined here/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: ERROR: Source object /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivdi3.o) has EABI version 4, but target u-boot has EABI version 0 /home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: failed to merge target specific data of file /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivdi3.o) /home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: ERROR: Source object /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_umoddi3.o) has EABI version 4, but target u-boot has EABI version 0 /home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: failed to merge target specific data of file /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_umoddi3.o) /home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: ERROR: Source object /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivsi3.o) has EABI version 4, but target u-boot has EABI version 0 /home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: failed to merge target specific data of file /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivsi3.o) /home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: ERROR: Source object /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_clz.o) has EABI version 4, but target u-boot has EABI version 0 /home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: failed to merge target specific data of file /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_clz.o) /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivdi3.o):(.ARM.exidx+0x0): undefined reference to __aeabi_unwind_cpp_pr0' /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_umoddi3.o):(.ARM.exidx+0x0): undefined reference to __aeabi_unwind_cpp_pr0'
Board name is pxa255_idp. It seems that only PXA does have these problems, I have tried some other boards and had no problems, again.
Any ideas?
S.
Quoted 5 lines · Sergey Lapin
Hi, all!
I am used to build at91 board using Angstrom EABI toolchain (gcc-4.2.4) without any problems. Now I try to build PXA board and have the following error on final link stage: (I build master branch)
[skip]
I've also found that thos error is due to:
cpu/pxa/libpxa.a(interrupts.o): In function `get_ticks':/home/slapin/u-boot/cpu/pxa/interrupts.c:113: undefined reference to `__umoddi3'/home/slapin/u-boot/cpu/pxa/interrupts.c:113: undefined reference to `__udivdi3'/home/slapin/u-boot/cpu/pxa/interrupts.c:113: undefined reference to `__udivdi3'
make: *** [u-boot] ?????? 1
and were introduced by commit 94a3312920b6f9b5da27309549fb73650718c10a
All the best,
S.
Dear Sergey Lapin,
Quoted 5 lines · In message <[email protected]> you wrote:
Hi, all!
I am used to build at91 board using Angstrom EABI toolchain (gcc-4.2.4) without any problems. Now I try to build PXA board and have the following error on final link stage: (I build master branch)
This ius a known issue - all PXA boards don;t build currently with an EABI conformant tool chain.
Quoted 4 lines
Board name is
pxa255_idp. It seems that only PXA does have these problems, I have tried some other boards and had no problems, again.Any ideas?
Jean-Cristophe said he had some patches queued or planned, which we are waiting for.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The years of peak mental activity are undoubtedly between the ages of four and eighteen. At four we know all the questions, at eighteen all the answers.
Quoted 23 lines · Sergey Lapin
Hi, all!
I am used to build at91 board using Angstrom EABI toolchain (gcc-4.2.4) without any problems. Now I try to build PXA board and have the following error on final link stage: (I build master branch)
cd /home/slapin/u-boot && ~/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld -Bstatic -T /home/slapin/u-boot/board/pxa255_idp/u-boot.lds -Ttext 0xa3080000 $UNDEF_SYM cpu/pxa/start.o \ --start-group lib_generic/libgeneric.a lib_generic/lzma/liblzma.a cpu/pxa/libpxa.a lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a net/libnet.a disk/libdisk.a drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a drivers/dma/libdma.a drivers/fpga/libfpga.a drivers/gpio/libgpio.a drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a drivers/input/libinput.a drivers/misc/libmisc.a drivers/mmc/libmmc.a drivers/mtd/libmtd.a drivers/mtd/nand/libnand.a drivers/mtd/nand_legacy/libnand_legacy.a drivers/mtd/onenand/libonenand.a drivers/mtd/ubi/libubi.a drivers/mtd/spi/libspi_flash.a drivers/net/libnet.a drivers/net/phy/libphy.a drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a common/libcommon.a libfdt/libfdt.a api/libapi.a post/libpost.a board/pxa255_idp/libpxa255_idp.a --end-group -L /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4 -lgcc \ -Map u-boot.map -o u-boot/home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivsi3.o): In function `__aeabi_uidiv':
/home/slapin/openedhand/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.4-r3/gcc-4.2.4/gcc/config/arm/lib1funcs.asm:730: multiple definition of `__udivsi3' lib_arm/libarm.a(_udivsi3.o):/home/slapin/u-boot/lib_arm/_udivsi3.S:17: first defined here/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: ERROR: Source object /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivdi3.o) has EABI version 4, but target u-boot has EABI version 0/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: failed to merge target specific data of file /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivdi3.o)/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: ERROR: Source object /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_umoddi3.o) has EABI version 4, but target u-boot has EABI version 0/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: failed to merge target specific data of file /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_umoddi3.o)/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: ERROR: Source object /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivsi3.o) has EABI version 4, but target u-boot has EABI version 0/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: failed to merge target specific data of file /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivsi3.o)/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: ERROR: Source object /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_clz.o) has EABI version 4, but target u-boot has EABI version 0/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: failed to merge target specific data of file /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_clz.o) /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivdi3.o):(.ARM.exidx+0x0): undefined reference to__aeabi_unwind_cpp_pr0' /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_umoddi3.o):(.ARM.exidx+0x0): undefined reference to__aeabi_unwind_cpp_pr0'
Quoted 2 lines
Board name is
pxa255_idp. It seems that only PXA does have these problems, I have tried some other boards and had no problems, again.
I know as tell you Wolfgang PXA have some issue with the EABI toolchain
You can try the mm branch of the u-boot-arm tree
and the patch reply to this e-mail
Best Regards,
J.
PATCH 1/1 PXA: timer use do_div and simplify it
--- cpu/pxa/interrupts.c | 46 ++++++++++++++++++++++++---------------------- 1 files changed, 24 insertions(+), 22 deletions(-)
cpu/pxa/interrupts.c +24 -22
@@ -28,6 +28,7 @@#include <common.h> #include <asm/arch/pxa-regs.h> +#include <div64.h> #ifdef CONFIG_USE_IRQ #error : interrupts not implemented yet
@@ -41,6 +42,20 @@#error "Timer frequency unknown - please config PXA CPU type"#endif +static inline unsigned long long tick_to_time (unsigned long long tick) +{ + tick *=CONFIG_SYS_HZ ; +do_div (tick,TIMER_FREQ_HZ ); +return tick; +} + +static inline unsigned long long us_to_tick (unsigned long long us) +{ + us = us *TIMER_FREQ_HZ +999999 ; +do_div (us,1000000 ); +return us; +} +int interrupt_init (void ) {/* nothing happens here - we don't setup any IRQs */
@@ -75,33 +90,20 @@ void reset_timer_masked (void)ulong get_timer_masked (void ) { -unsigned long long ticks =get_ticks (); - -return (((ticks /TIMER_FREQ_HZ ) *1000 ) + - ((ticks %TIMER_FREQ_HZ ) *1000 ) /TIMER_FREQ_HZ ); +return tick_to_time (get_ticks ()); }void udelay_masked (unsigned long usec) { +unsigned long long tmp;ulong tmo; -ulong endtime; -signed long diff; - -if (usec >=1000 ) { - tmo = usec /1000 ; - tmo *=TIMER_FREQ_HZ ; - tmo /=1000 ; - }else { - tmo = usec *TIMER_FREQ_HZ ; - tmo /= (1000 *1000 ); - } - - endtime =get_ticks () + tmo; - -do { -ulong now =get_ticks (); - diff = endtime - now; - }while (diff >=0 ); + + tmo =us_to_tick (usec); + tmp =get_ticks () + tmo;/* get current timestamp */ + +while (get_ticks () < tmp)/* loop till event */ +/*NOP*/ ; + }/*
Signature · 1 line
1.5.6.5