Skip to contentSkip to conversation

Add support for DVB part of Avermedia A700 DVB-S cards

PATCH In review Matthias Schwarzott 2 participants 4 messages Feb 24, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

cover Add support for DVB part of Avermedia A700 DVB-S cards

Hello all!

These patches finally add support for the DVB part of the Avermedia A700 DVB-S cards.

The first adds the tuner-driver for the Zarlink zl10036. The second adds the glue code to saa7134-dvb to use it.

After having them lying around a long time I now did a bit of cleanup and send them out now.

Regards
Matthias

#1 lore raw

PATCH 1/2 Add support for Zarlink ZL10036 DVB-S tuner.

This driver is based on initial work by Tino Reichardt and was heavily changed. The datasheet of the zl10036 can be found here and on other places on the net:

http://www.mcmilk.de/projects/dvb-card/datasheets/ZL10036.pdf

The zl10038 is similar to the zl10036, so it is maybe possible to write a common driver of necessary.

linux/drivers/media/dvb/frontends/Kconfig +7 -0
Index: v4l-dvb/linux/drivers/media/dvb/frontends/Kconfig
===================================================================
@@ -55,6 +55,13 @@ config DVB_MT312
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
+config DVB_ZL10036
+	tristate "Zarlink ZL10036 silicon tuner"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
 config DVB_S5H1420
 	tristate "Samsung S5H1420 based"
 	depends on DVB_CORE && I2C
linux/drivers/media/dvb/frontends/Makefile +1 -0
Index: v4l-dvb/linux/drivers/media/dvb/frontends/Makefile
===================================================================
@@ -28,6 +28,7 @@ obj-$(CONFIG_DVB_TDA1004X) += tda1004x.o
 obj-$(CONFIG_DVB_SP887X) += sp887x.o
 obj-$(CONFIG_DVB_NXT6000) += nxt6000.o
 obj-$(CONFIG_DVB_MT352) += mt352.o
+obj-$(CONFIG_DVB_ZL10036) += zl10036.o
 obj-$(CONFIG_DVB_ZL10353) += zl10353.o
 obj-$(CONFIG_DVB_CX22702) += cx22702.o
 obj-$(CONFIG_DVB_DRX397XD) += drx397xD.o
linux/drivers/media/dvb/frontends/zl10036.c new file +519 -0

519 lines not on this page · raw message

linux/drivers/media/dvb/frontends/zl10036.h new file +53 -0

53 lines not on this page · raw message

#2 lore raw

PATCH 2/2 saa7134: add DVB support for Avermedia A700 cards

In reply to Matthias Schwarzott

Add DVB support for Avermedia DVB-S Pro and
Avermedia DVB-S Hybrid+FM card both labled A700.

They use zl10313 demod (driver mt312) and zl10036 tuner.

linux/drivers/media/video/saa7134/Kconfig +2 -0
Index: v4l-dvb/linux/drivers/media/video/saa7134/Kconfig
===================================================================
@@ -37,6 +37,8 @@ config VIDEO_SAA7134_DVB
 	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
 	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
+ 	select DVB_ZL10036 if !DVB_FE_CUSTOMISE
+ 	select DVB_MT312 if !DVB_FE_CUSTOMISE
 	---help---
 	  This adds support for DVB cards based on the
 	  Philips saa7134 chip.
linux/drivers/media/video/saa7134/saa7134-cards.c +7 -9
Index: v4l-dvb/linux/drivers/media/video/saa7134/saa7134-cards.c
===================================================================
@@ -4460,8 +4460,7 @@ struct saa7134_board saa7134_boards[] = 
 		.radio_type     = UNSET,
 		.tuner_addr     = ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
-		/* no DVB support for now */
-		/* .mpeg           = SAA7134_MPEG_DVB, */
+		.mpeg           = SAA7134_MPEG_DVB,
 		.inputs         = { {
 			.name = name_comp,
 			.vmux = 1,
@@ -4480,8 +4479,7 @@ struct saa7134_board saa7134_boards[] = 
 		.radio_type     = UNSET,
 		.tuner_addr     = ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
-		/* no DVB support for now */
-		/* .mpeg           = SAA7134_MPEG_DVB, */
+		.mpeg           = SAA7134_MPEG_DVB,
 		.inputs         = { {
 			.name = name_comp,
 			.vmux = 1,
@@ -6187,15 +6185,15 @@ int saa7134_board_init1(struct saa7134_d
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x8c040007, 0x8c040007);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0c0007cd, 0x0c0007cd);
 		break;
-	case SAA7134_BOARD_AVERMEDIA_A700_PRO:
 	case SAA7134_BOARD_AVERMEDIA_A700_HYBRID:
-		/* write windows gpio values */
-		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x80040100, 0x80040100);
-		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100);
 		printk("%s: %s: hybrid analog/dvb card\n"
-		       "%s: Sorry, only analog s-video and composite input "
+		       "%s: Sorry, of the analog inputs, only analog s-video and composite "
 		       "are supported for now.\n",
 			dev->name, card(dev).name, dev->name);
+	case SAA7134_BOARD_AVERMEDIA_A700_PRO:
+		/* write windows gpio values */
+		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x80040100, 0x80040100);
+		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100);
 		break;
 	}
 	return 0;
linux/drivers/media/video/saa7134/saa7134-dvb.c +27 -0
Index: v4l-dvb/linux/drivers/media/video/saa7134/saa7134-dvb.c
===================================================================
@@ -51,6 +51,9 @@
 
 #include "zl10353.h"
 
+#include "zl10036.h"
+#include "mt312.h"
+
 MODULE_AUTHOR("Gerd Knorr <[email protected]> [SuSE Labs]");
 MODULE_LICENSE("GPL");
 
@@ -949,6 +952,17 @@ static struct nxt200x_config kworldatsc1
 	.demod_address    = 0x0a,
 };
 
+/* ------------------------------------------------------------------ */
+
+static struct mt312_config avertv_a700_mt312 = {
+	.demod_address = 0x0e,
+	.voltage_inverted = 1,
+};
+
+static struct zl10036_config avertv_a700_tuner = {
+	.tuner_address = 0x60,
+};
+
 /* ==================================================================
  * Core code
  */
@@ -1379,6 +1393,19 @@ static int dvb_init(struct saa7134_dev *
 				   TUNER_PHILIPS_FMD1216ME_MK3);
 		}
 		break;
+	case SAA7134_BOARD_AVERMEDIA_A700_PRO:
+	case SAA7134_BOARD_AVERMEDIA_A700_HYBRID:
+		/* Zarlink ZL10313 */
+		fe0->dvb.frontend = dvb_attach(mt312_attach,
+			&avertv_a700_mt312, &dev->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (dvb_attach(zl10036_attach, fe0->dvb.frontend,
+					&avertv_a700_tuner, &dev->i2c_adap) == NULL) {
+				wprintk("%s: No zl10036 found!\n",
+					__FUNCTION__);
+			}
+		}
+		break;
 	default:
 		wprintk("Huh? unknown DVB card?\n");
 		break;
#3 lore raw
In reply to Matthias Schwarzott

That's great, I really hope your patches finally find their way into the main tree. I'm just tired of manually downloading & patching HG sources everytime I needed to recompile the kernel...

Anyway, I've been using the card for some time now (almost a year, IIRC...) and it runs very well in DVB-S mode. I was using your a700_full_xxxx patches, I hope you still leave them available until these patches are merged...

Best regards,
Eduard

2009/2/24 Matthias Schwarzott <[email protected]>:

Quoted 19 lines

Hello all!

These patches finally add support for the DVB part of the Avermedia A700 DVB-S cards.

The first adds the tuner-driver for the Zarlink zl10036. The second adds the glue code to saa7134-dvb to use it.

After having them lying around a long time I now did a bit of cleanup and send them out now.

Regards
Matthias

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html