Please pull u-boot-mpc83xx.git
WD,
please pull Heiko's v4 patchset for kmeter1 improvements, spd sdram fixes, SerDes init correction, and 256MB+ RAM fixes and DHCP for the 8349ITX:
The following changes since commit 00cc5595a7caac8066b408774383a956c2e26797:
Anatolij Gustschin (1):
lcd: Fix compilation warning in common/lcd.c
are available in the git repository at:
git://git.denx.de/u-boot-mpc83xx.git master
Anton Vorontsov (1):
mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
Dave Liu (1):
83xx: Fix some bugs in spd sdram code
Heiko Schocher (7):
i2c, dtt: move dtt_init () to board_init_r () 83xx, kmeter1: add I2C, dtt, eeprom support 83xx, i2c: add mux support for fsl_i2c
83xx, kmeter1: autodetect size of DDR II RAM 83xx, kmeter1: updates for 2009.03
83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1 8360, kmeter1: added bootcount feature.
Valeriy Glushkov (1):
MPC8349ITX: several config issues fixed
board/freescale/mpc837xemds/pci.c | 14 ++-- board/keymile/common/common.c | 2 +- board/keymile/kmeter1/kmeter1.c | 81 +++++++++++++++++++------ cpu/mpc83xx/cpu.c | 34 ++++++++++ cpu/mpc83xx/fdt.c | 18 ++++++ cpu/mpc83xx/spd_sdram.c | 26 +++++++- drivers/i2c/fsl_i2c.c | 22 +++++++- include/configs/MPC8349ITX.h | 5 ++ include/configs/keymile-common.h | 7 -- include/configs/kmeter1.h | 120 +++++++++++++++++++++++++++---------- lib_ppc/board.c | 5 +- 11 files changed, 263 insertions(+), 71 deletions(-)
Thanks,
Kim
Wolfgang Denk
AppliedDear Kim Phillips,
Quoted 14 lines · In message <[email protected]> you wrote:
WD,
please pull Heiko's v4 patchset for kmeter1 improvements, spd sdram fixes, SerDes init correction, and 256MB+ RAM fixes and DHCP for the 8349ITX:
The following changes since commit
00cc5595a7caac8066b408774383a956c2e26797:
Anatolij Gustschin (1):
lcd: Fix compilation warning incommon/lcd.care available in the git repository at:
git://git.denx.de/u-boot-mpc83xx.gitmaster
Quoted 8 lines
Anton Vorontsov (1):
mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signalDave Liu (1):
83xx: Fix some bugs in spd sdram codeHeiko Schocher (7):
i2c, dtt: movedtt_init() toboard_init_r()
You were not supposed to add this to your tree!!!
Quoted 10 lines
83xx, kmeter1: add I2C, dtt, eeprom support 83xx, i2c: add mux support for
fsl_i2c
83xx, kmeter1: autodetect size of DDR II RAM 83xx, kmeter1: updates for 2009.03
83xx, kmeter:QE_ENET10errata for Silicon Revision 2.1 8360, kmeter1: added bootcount feature.Valeriy Glushkov (1):
MPC8349ITX: several config issues fixed
Quoted 12 lines
board/freescale/mpc837xemds/pci.c | 14 ++-- board/keymile/common/common.c | 2 +- board/keymile/kmeter1/kmeter1.c | 81 +++++++++++++++++++------ cpu/mpc83xx/cpu.c | 34 ++++++++++ cpu/mpc83xx/fdt.c | 18 ++++++ cpu/mpc83xx/spd_sdram.c | 26 +++++++- drivers/i2c/fsl_i2c.c | 22 +++++++- include/configs/MPC8349ITX.h | 5 ++ include/configs/keymile-common.h | 7 -- include/configs/kmeter1.h | 120 +++++++++++++++++++++++++++---------- lib_ppc/board.c | 5 +- 11 files changed, 263 insertions(+), 71 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Unix is simple, but it takes a genius to understand the simplicity." - Dennis Ritchie
Quoted 4 lines · On Mon, 09 Mar 2009 00:39:16 +0100 Wolfgang Denk <[email protected]> wrote:
Quoted 2 lines
Heiko Schocher (7):
i2c, dtt: movedtt_init() toboard_init_r()You were not supposed to add this to your tree!!!
argh, the fact that Heiko had already applied this to his tree slipped me. Apologies to both you and Heiko.
Kim
Dear Kim Phillips,
Quoted 10 lines · In message <[email protected]> you wrote:
Quoted 4 lines · On Mon, 09 Mar 2009 00:39:16 +0100 Wolfgang Denk <[email protected]> wrote:
Quoted 2 lines
Heiko Schocher (7):
i2c, dtt: movedtt_init() toboard_init_r()You were not supposed to add this to your tree!!!
argh, the fact that Heiko had already applied this to his tree slipped me. Apologies to both you and Heiko.
No problem. Were you able to check if I resolved the merge conflicts correctly?
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "May the forces of evil become confused on the way to your house." - George Carlin
Quoted 8 lines · On Tue, 10 Mar 2009 00:45:41 +0100 Wolfgang Denk <[email protected]> wrote:
Dear Kim Phillips,
Quoted 2 lines · In message <[email protected]> you wrote:
argh, the fact that Heiko had already applied this to his tree slipped me. Apologies to both you and Heiko.
No problem. Were you able to check if I resolved the merge conflicts correctly?
everything appears to be intact.
Kim