Skip to contentSkip to conversation

xtensa: s6000 & s6105

PATCH New Johannes Weiner 1 participant 9 messages Mar 10, 2009 Tensilica Xtensa port (xtensa)

lore
Share & tools
lore
#1 lore raw

PATCH 1/8 xtensa: nommu support

In reply to Johannes Weiner

Add support for CONFIG_MMU=n configurations.

---
 arch/xtensa/include/asm/cacheflush.h    |   10 +++-
 arch/xtensa/include/asm/dma.h           |    3 -
 arch/xtensa/include/asm/io.h            |    9 +++-
 arch/xtensa/include/asm/mmu.h           |    5 ++
 arch/xtensa/include/asm/mmu_context.h   |    5 ++
 arch/xtensa/include/asm/nommu.h         |    3 +
 arch/xtensa/include/asm/nommu_context.h |   25 +++++++++++
 arch/xtensa/include/asm/page.h          |    9 +++-
 arch/xtensa/include/asm/pgtable.h       |   13 +++--
 arch/xtensa/include/asm/processor.h     |    6 ++
 arch/xtensa/kernel/entry.S              |    3 -
 arch/xtensa/kernel/head.S               |    3 -
 arch/xtensa/kernel/setup.c              |    7 +++
 arch/xtensa/kernel/traps.c              |    2 
 arch/xtensa/kernel/vectors.S            |    4 +
 arch/xtensa/mm/Makefile                 |    3 -
 arch/xtensa/mm/init.c                   |   62 ----------------------------
 arch/xtensa/mm/misc.S                   |    2 
 arch/xtensa/mm/mmu.c                    |   70 ++++++++++++++++++++++++++++++++
 19 files changed, 169 insertions(+), 75 deletions(-)
 create mode 100644 arch/xtensa/include/asm/nommu.h
 create mode 100644 arch/xtensa/include/asm/nommu_context.h
 create mode 100644 arch/xtensa/mm/mmu.c
arch/xtensa/include/asm/cacheflush.h +7 -3
@@ -65,13 +65,17 @@ extern void __flush_invalidate_dcache_ra
 # define __flush_invalidate_dcache_range(p,s)	__invalidate_dcache_range(p,s)
 #endif
 
-#if (DCACHE_WAY_SIZE > PAGE_SIZE)
+#if defined(CONFIG_MMU) && (DCACHE_WAY_SIZE > PAGE_SIZE)
 extern void __flush_invalidate_dcache_page_alias(unsigned long, unsigned long);
+#else
+static inline void __flush_invalidate_dcache_page_alias(unsigned long virt,
+							unsigned long phys) { }
 #endif
-#if (ICACHE_WAY_SIZE > PAGE_SIZE)
+#if defined(CONFIG_MMU) && (ICACHE_WAY_SIZE > PAGE_SIZE)
 extern void __invalidate_icache_page_alias(unsigned long, unsigned long);
 #else
-# define __invalidate_icache_page_alias(v,p)	do { } while(0)
+static inline void __invalidate_icache_page_alias(unsigned long virt,
+						unsigned long phys) { }
 #endif
 
 /*
arch/xtensa/include/asm/dma.h +2 -1
@@ -44,8 +44,9 @@
  *	the value desired).
  */
 
+#ifndef MAX_DMA_ADDRESS
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + XCHAL_KIO_SIZE - 1)
-
+#endif
 
 /* Reserve and release a DMA channel */
 extern int request_dma(unsigned int dmanr, const char * device_id);
arch/xtensa/include/asm/io.h +8 -1
@@ -69,21 +69,28 @@ static inline void * phys_to_virt(unsign
 
 static inline void *ioremap(unsigned long offset, unsigned long size)
 {
+#ifdef CONFIG_MMU
 	if (offset >= XCHAL_KIO_PADDR
 	    && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE)
 		return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_BYPASS_VADDR);
-
 	else
 		BUG();
+#else
+	return (void *)offset;
+#endif
 }
 
 static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
 {
+#ifdef CONFIG_MMU
 	if (offset >= XCHAL_KIO_PADDR
 	    && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE)
 		return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_CACHED_VADDR);
 	else
 		BUG();
+#else
+	return (void *)offset;
+#endif
 }
 
 static inline void iounmap(void *addr)
arch/xtensa/include/asm/mmu.h +5 -0
@@ -11,7 +11,12 @@
 #ifndef _XTENSA_MMU_H
 #define _XTENSA_MMU_H
 
+#ifndef CONFIG_MMU
+#include <asm/nommu.h>
+#else
+
 /* Default "unsigned long" context */
 typedef unsigned long mm_context_t;
 
+#endif /* CONFIG_MMU */
 #endif	/* _XTENSA_MMU_H */
arch/xtensa/include/asm/mmu_context.h +5 -0
@@ -13,6 +13,10 @@
 #ifndef _XTENSA_MMU_CONTEXT_H
 #define _XTENSA_MMU_CONTEXT_H
 
+#ifndef CONFIG_MMU
+#include <asm/nommu_context.h>
+#else
+
 #include <linux/stringify.h>
 #include <linux/sched.h>
 
@@ -133,4 +137,5 @@ static inline void enter_lazy_tlb(struct
 
 }
 
+#endif /* CONFIG_MMU */
 #endif /* _XTENSA_MMU_CONTEXT_H */
arch/xtensa/include/asm/nommu.h new file +3 -0
@@ -0,0 +1,3 @@
+typedef struct {
+	unsigned long end_brk;
+} mm_context_t;
arch/xtensa/include/asm/nommu_context.h new file +25 -0
@@ -0,0 +1,25 @@
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	return 0;
+}
+
+static inline void destroy_context(struct mm_struct *mm)
+{
+}
+
+static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+				struct task_struct *tsk)
+{
+}
+
+static inline void deactivate_mm(struct task_struct *tsk, struct mm_struct *mm)
+{
+}
arch/xtensa/include/asm/page.h +8 -1
@@ -33,8 +33,14 @@
 #define PAGE_SIZE		(__XTENSA_UL_CONST(1) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE-1))
 
+#ifdef CONFIG_MMU
 #define PAGE_OFFSET		XCHAL_KSEG_CACHED_VADDR
 #define MAX_MEM_PFN		XCHAL_KSEG_SIZE
+#else
+#define PAGE_OFFSET		0
+#define MAX_MEM_PFN		(PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE)
+#endif
+
 #define PGTABLE_START		0x80000000
 
 /*
@@ -165,8 +171,9 @@ extern void copy_user_page(void*, void*,
 #define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
 #define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
 
+#ifdef CONFIG_MMU
 #define WANT_PAGE_VIRTUAL
-
+#endif
 
 #endif /* __ASSEMBLY__ */
 
arch/xtensa/include/asm/pgtable.h +8 -5
@@ -183,7 +183,15 @@ extern unsigned long empty_zero_page[102
 
 #define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
 
+#ifdef CONFIG_MMU
 extern pgd_t swapper_pg_dir[PAGE_SIZE/sizeof(pgd_t)];
+extern void paging_init(void);
+extern void pgtable_cache_init(void);
+#else
+# define swapper_pg_dir NULL
+static inline void paging_init(void) { }
+static inline void pgtable_cache_init(void) { }
+#endif
 
 /*
  * The pmd contains the kernel virtual address of the pte page.
@@ -383,8 +391,6 @@ ptep_set_wrprotect(struct mm_struct *mm,
 
 #else
 
-extern void paging_init(void);
-
 #define kern_addr_valid(addr)	(1)
 
 extern  void update_mmu_cache(struct vm_area_struct * vma,
@@ -398,9 +404,6 @@ extern  void update_mmu_cache(struct vm_
 #define io_remap_pfn_range(vma,from,pfn,size,prot) \
                 remap_pfn_range(vma, from, pfn, size, prot)
 
-
-extern void pgtable_cache_init(void);
-
 typedef pte_t *pte_addr_t;
 
 #endif /* !defined (__ASSEMBLY__) */
arch/xtensa/include/asm/processor.h +6 -0
@@ -13,6 +13,7 @@
 
 #include <variant/core.h>
 #include <asm/coprocessor.h>
+#include <platform/hardware.h>
 
 #include <linux/compiler.h>
 #include <asm/ptrace.h>
@@ -35,7 +36,12 @@
  * the 1 GB requirement applies to the stack as well.
  */
 
+#ifdef CONFIG_MMU
 #define TASK_SIZE	__XTENSA_UL_CONST(0x40000000)
+#else
+#define TASK_SIZE	(PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE)
+#endif
+
 #define STACK_TOP	TASK_SIZE
 #define STACK_TOP_MAX	STACK_TOP
 
arch/xtensa/kernel/entry.S +2 -1
@@ -1463,6 +1463,7 @@ ENTRY(_spill_registers)
 	callx0	a0		# should not return
 1:	j	1b
 
+#ifdef CONFIG_MMU
 /*
  * We should never get here. Bail out!
  */
@@ -1775,7 +1776,7 @@ ENTRY(fast_store_prohibited)
 	bbsi.l	a2, PS_UM_BIT, 1f
 	j	_kernel_exception
 1:	j	_user_exception
-
+#endif /* CONFIG_MMU */
 
 /*
  * System Calls.
arch/xtensa/kernel/head.S +2 -1
@@ -235,8 +235,9 @@ should_never_return:
  */
 	
 .section ".bss.page_aligned", "w"
+#ifdef CONFIG_MMU
 ENTRY(swapper_pg_dir)
 	.fill	PAGE_SIZE, 1, 0
+#endif
 ENTRY(empty_zero_page)
 	.fill	PAGE_SIZE, 1, 0
-
arch/xtensa/kernel/setup.c +7 -0
@@ -82,7 +82,13 @@ sysmem_info_t __initdata sysmem;
 int initrd_is_mapped;
 #endif
 
+#ifdef CONFIG_MMU
 extern void init_mmu(void);
+#else
+static inline void init_mmu(void) { }
+#endif
+
+extern void zones_init(void);
 
 /*
  * Boot parameter parsing.
@@ -284,6 +290,7 @@ void __init setup_arch(char **cmdline_p)
 
 
 	paging_init();
+	zones_init();
 
 #ifdef CONFIG_VT
 # if defined(CONFIG_VGA_CONSOLE)
arch/xtensa/kernel/traps.c +2 -0
@@ -104,6 +104,7 @@ static dispatch_init_table_t __initdata 
 #endif
 { EXCCAUSE_UNALIGNED,		KRNL,	   fast_unaligned },
 #endif
+#ifdef CONFIG_MMU
 { EXCCAUSE_ITLB_MISS,		0,	   do_page_fault },
 { EXCCAUSE_ITLB_MISS,		USER|KRNL, fast_second_level_miss},
 { EXCCAUSE_ITLB_MULTIHIT,		0,	   do_multihit },
@@ -118,6 +119,7 @@ static dispatch_init_table_t __initdata 
 { EXCCAUSE_STORE_CACHE_ATTRIBUTE,	USER|KRNL, fast_store_prohibited },
 { EXCCAUSE_STORE_CACHE_ATTRIBUTE,	0,	   do_page_fault },
 { EXCCAUSE_LOAD_CACHE_ATTRIBUTE,	0,	   do_page_fault },
+#endif /* CONFIG_MMU */
 /* XCCHAL_EXCCAUSE_FLOATING_POINT unhandled */
 #if XTENSA_HAVE_COPROCESSOR(0)
 COPROCESSOR(0),
arch/xtensa/kernel/vectors.S +4 -0
@@ -309,6 +309,7 @@ ENTRY(_DoubleExceptionVector)
 	 * All other exceptions are unexpected and thus unrecoverable!
 	 */
 
+#ifdef CONFIG_MMU
 	.extern fast_second_level_miss_double_kernel
 
 .Lksp:	/* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */
@@ -319,6 +320,9 @@ ENTRY(_DoubleExceptionVector)
 	bnez	a3, .Lunrecoverable
 1:	movi	a3, fast_second_level_miss_double_kernel
 	jx	a3
+#else
+.equ	.Lksp,	.Lunrecoverable
+#endif
 
 	/* Critical! We can't handle this situation. PANIC! */
 
arch/xtensa/mm/Makefile +2 -1
@@ -2,4 +2,5 @@
 # Makefile for the Linux/Xtensa-specific parts of the memory manager.
 #
 
-obj-y	 := init.o fault.o tlb.o misc.o cache.o
+obj-y			:= init.o cache.o misc.o
+obj-$(CONFIG_MMU)	+= fault.o mmu.o tlb.o
arch/xtensa/mm/init.c +1 -61

89 lines not on this page · raw message

arch/xtensa/mm/misc.S +2 -0
@@ -84,6 +84,7 @@ ENTRY(copy_page)
 
 	retw
 
+#ifdef CONFIG_MMU
 /*
  * If we have to deal with cache aliasing, we use temporary memory mappings
  * to ensure that the source and destination pages have the same color as
@@ -311,6 +312,7 @@ ENTRY(__invalidate_icache_page_alias)
 /* End of special treatment in tlb miss exception */
 
 ENTRY(__tlbtemp_mapping_end)
+#endif /* CONFIG_MMU
 
 /*
  * void __invalidate_icache_page(ulong start)
arch/xtensa/mm/mmu.c new file +70 -0

70 lines not on this page · raw message

#2 lore raw

PATCH 2/8 xtensa: variant-specific code

In reply to Johannes Weiner

Allow the variant to provide own code. Add empty dummy Makefiles for the existing variants.

The s6000 has circuits that require own drivers. Allow these to live in the variant-specific directory.

---
 arch/xtensa/Makefile                 |    3 +++
 arch/xtensa/variants/dc232b/Makefile |    1 +
 arch/xtensa/variants/fsf/Makefile    |    1 +
 3 files changed, 5 insertions(+)
 create mode 100644 arch/xtensa/variants/dc232b/Makefile
 create mode 100644 arch/xtensa/variants/fsf/Makefile
arch/xtensa/Makefile +3 -0
@@ -68,6 +68,9 @@ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS)
 
 head-y		:= arch/xtensa/kernel/head.o
 core-y		+= arch/xtensa/kernel/ arch/xtensa/mm/
+ifneq ($(VARIANT),)
+core-y		+= arch/xtensa/variants/$(VARIANT)/
+endif
 ifneq ($(PLATFORM),)
 core-y		+= arch/xtensa/platforms/$(PLATFORM)/
 endif
arch/xtensa/variants/dc232b/Makefile new file +1 -0
@@ -0,0 +1 @@
+# dc232b Makefile
arch/xtensa/variants/fsf/Makefile new file +1 -0
@@ -0,0 +1 @@
+# fsf Makefile
#3 lore raw

PATCH 3/8 xtensa: variant irq set callbacks

In reply to Johannes Weiner

Allow the core variant code to provide irq enable/disable callbacks.

The s6000 has a crossbar that multiplexes peripheral IRQ lines to a smaller number of core lines. These callbacks allow the s6000 variant to program the crossbar when core lines are toggled.

---
 arch/xtensa/Kconfig           |    3 +++
 arch/xtensa/include/asm/irq.h |    7 +++++++
 arch/xtensa/kernel/irq.c      |   14 ++++++++++++++
 3 files changed, 24 insertions(+)
arch/xtensa/Kconfig +3 -0
@@ -51,6 +51,9 @@ source "kernel/Kconfig.freezer"
 config MMU
 	def_bool n
 
+config VARIANT_IRQ_SWITCH
+	def_bool n
+
 menu "Processor type and features"
 
 choice
arch/xtensa/include/asm/irq.h +7 -0
@@ -14,6 +14,13 @@
 #include <platform/hardware.h>
 #include <variant/core.h>
 
+#ifdef CONFIG_VARIANT_IRQ_SWITCH
+#include <variant/irq.h>
+#else
+static inline void variant_irq_enable(unsigned int irq) { }
+static inline void variant_irq_disable(unsigned int irq) { }
+#endif
+
 #ifndef PLATFORM_NR_IRQS
 # define PLATFORM_NR_IRQS 0
 #endif
arch/xtensa/kernel/irq.c +14 -0
@@ -132,6 +132,18 @@ static void xtensa_irq_unmask(unsigned i
 	set_sr (cached_irq_mask, INTENABLE);
 }
 
+static void xtensa_irq_enable(unsigned int irq)
+{
+	variant_irq_enable(irq);
+	xtensa_irq_unmask(irq);
+}
+
+static void xtensa_irq_disable(unsigned int irq)
+{
+	xtensa_irq_mask(irq);
+	variant_irq_disable(irq);
+}
+
 static void xtensa_irq_ack(unsigned int irq)
 {
 	set_sr(1 << irq, INTCLEAR);
@@ -146,6 +158,8 @@ static int xtensa_irq_retrigger(unsigned
 
 static struct irq_chip xtensa_irq_chip = {
 	.name		= "xtensa",
+	.enable		= xtensa_irq_enable,
+	.disable	= xtensa_irq_disable,
 	.mask		= xtensa_irq_mask,
 	.unmask		= xtensa_irq_unmask,
 	.ack		= xtensa_irq_ack,
#4 lore raw

PATCH 4/8 xtensa: s6000 variant core definitions

In reply to Johannes Weiner

S6000 core configuration files from Tensilica.

---
 arch/xtensa/variants/s6000/include/variant/core.h    |  431 +++++++++++++++++++
 arch/xtensa/variants/s6000/include/variant/tie-asm.h |  304 +++++++++++++
 arch/xtensa/variants/s6000/include/variant/tie.h     |  191 ++++++++
 3 files changed, 926 insertions(+)
 create mode 100644 arch/xtensa/variants/s6000/include/variant/core.h
 create mode 100644 arch/xtensa/variants/s6000/include/variant/tie-asm.h
 create mode 100644 arch/xtensa/variants/s6000/include/variant/tie.h
arch/xtensa/variants/s6000/include/variant/core.h new file +431 -0
@@ -0,0 +1,431 @@
+/*
+ * Xtensa processor core configuration information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1999-2008 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			0	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			64	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		6	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	8	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
+#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		1	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32		0	/* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	1	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		0	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		0	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		0	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		4	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			0	/* processor ID register */
+#define XCHAL_HAVE_THREADPTR		0	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		1	/* boolean registers */
+#define XCHAL_HAVE_CP			1	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			8	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		0	/* MAC16 package */
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector floating-point pkg */
+#define XCHAL_HAVE_FP			1	/* floating point pkg */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_HIFI2		0	/* HiFi2 Audio Engine pkg */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		8	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		16	/* data width in bytes */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+
+#define XCHAL_SW_VERSION		701001	/* sw version of this header */
+
+#define XCHAL_CORE_ID			"stretch_bali"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_BUILD_UNIQUE_ID		0x000104B9	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC2F3F9FE	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x054104B9	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX1.0.2"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2100	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		2	/* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION		210002	/* major*100+minor */
+#define XCHAL_HW_REL_LX1		1
+#define XCHAL_HW_REL_LX1_0		1
+#define XCHAL_HW_REL_LX1_0_2		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2100	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	2	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION		210002	/* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2100	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	2	/* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION		210002	/* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		16	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		16	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		4	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		4	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		32768	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		32768	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		9
+#define XCHAL_DCACHE_SETWIDTH		10
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		4
+#define XCHAL_DCACHE_WAYS		2
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	1
+#define XCHAL_DCACHE_LINE_LOCKABLE	0
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		1	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			1	/* number of core XLMI ports */
+
+/*  Data RAM 0:  */
+#define XCHAL_DATARAM0_VADDR		0x3FFF0000
+#define XCHAL_DATARAM0_PADDR		0x3FFF0000
+#define XCHAL_DATARAM0_SIZE		65536
+#define XCHAL_DATARAM0_ECC_PARITY	0
+
+/*  XLMI Port 0:  */
+#define XCHAL_XLMI0_VADDR		0x37F80000
+#define XCHAL_XLMI0_PADDR		0x37F80000
+#define XCHAL_XLMI0_SIZE		262144
+#define XCHAL_XLMI0_ECC_PARITY	0
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			1	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		3	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		27	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	5	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		20	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		4	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		1	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x01F07FFF
+#define XCHAL_INTLEVEL2_MASK		0x02018000
+#define XCHAL_INTLEVEL3_MASK		0x04060000
+#define XCHAL_INTLEVEL4_MASK		0x00000000
+#define XCHAL_INTLEVEL5_MASK		0x00080000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00000000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x01F07FFF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x03F1FFFF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x07F7FFFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x07F7FFFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x07FFFFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x07FFFFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x07FFFFFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		1
+#define XCHAL_INT2_LEVEL		1
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		1
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		1
+#define XCHAL_INT9_LEVEL		1
+#define XCHAL_INT10_LEVEL		1
+#define XCHAL_INT11_LEVEL		1
+#define XCHAL_INT12_LEVEL		1
+#define XCHAL_INT13_LEVEL		1
+#define XCHAL_INT14_LEVEL		1
+#define XCHAL_INT15_LEVEL		2
+#define XCHAL_INT16_LEVEL		2
+#define XCHAL_INT17_LEVEL		3
+#define XCHAL_INT18_LEVEL		3
+#define XCHAL_INT19_LEVEL		5
+#define XCHAL_INT20_LEVEL		1
+#define XCHAL_INT21_LEVEL		1
+#define XCHAL_INT22_LEVEL		1
+#define XCHAL_INT23_LEVEL		1
+#define XCHAL_INT24_LEVEL		1
+#define XCHAL_INT25_LEVEL		2
+#define XCHAL_INT26_LEVEL		3
+#define XCHAL_DEBUGLEVEL		4	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
+#define XCHAL_NMILEVEL			5	/* NMI "level" (for use with
+						   EXCSAVE/EPS/EPC_n, RFI n) */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT12_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT13_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT14_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT15_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT16_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT17_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT18_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT19_TYPE 	XTHAL_INTTYPE_NMI
+#define XCHAL_INT20_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT21_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT22_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT23_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT24_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT25_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT26_TYPE 	XTHAL_INTTYPE_TIMER
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xF8000000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00F00000
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x00000000
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x0007FFFF
+#define XCHAL_INTTYPE_MASK_TIMER	0x07000000
+#define XCHAL_INTTYPE_MASK_NMI		0x00080000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		24	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		25	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		26	/* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT		19	/* non-maskable interrupt */
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+#define XCHAL_INTLEVEL5_NUM		19
+/*  (There are many interrupts each at level(s) 1, 2, 3.)  */
+
+
+/*
+ *  External interrupt vectors/levels.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL interrupt number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		6	/* (intlevel 1) */
+#define XCHAL_EXTINT7_NUM		7	/* (intlevel 1) */
+#define XCHAL_EXTINT8_NUM		8	/* (intlevel 1) */
+#define XCHAL_EXTINT9_NUM		9	/* (intlevel 1) */
+#define XCHAL_EXTINT10_NUM		10	/* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM		11	/* (intlevel 1) */
+#define XCHAL_EXTINT12_NUM		12	/* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM		13	/* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM		14	/* (intlevel 1) */
+#define XCHAL_EXTINT15_NUM		15	/* (intlevel 2) */
+#define XCHAL_EXTINT16_NUM		16	/* (intlevel 2) */
+#define XCHAL_EXTINT17_NUM		17	/* (intlevel 3) */
+#define XCHAL_EXTINT18_NUM		18	/* (intlevel 3) */
+#define XCHAL_EXTINT19_NUM		19	/* (intlevel 5) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT	0	/* relocatable vectors */
+#define XCHAL_HAVE_VECBASE		0	/* relocatable vectors */
+
+#define XCHAL_RESET_VECOFS		0x00000000
+#define XCHAL_RESET_VECTOR_VADDR	0x3FFE03D0
+#define XCHAL_RESET_VECTOR_PADDR	0x3FFE03D0
+#define XCHAL_USER_VECOFS		0x00000000
+#define XCHAL_USER_VECTOR_VADDR		0x40000220
+#define XCHAL_USER_VECTOR_PADDR		0x40000220
+#define XCHAL_KERNEL_VECOFS		0x00000000
+#define XCHAL_KERNEL_VECTOR_VADDR	0x40000200
+#define XCHAL_KERNEL_VECTOR_PADDR	0x40000200
+#define XCHAL_DOUBLEEXC_VECOFS		0x00000000
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0x400002A0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x400002A0
+#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR	0x40000000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x40000000
+#define XCHAL_INTLEVEL2_VECOFS		0x00000000
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0x40000240
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x40000240
+#define XCHAL_INTLEVEL3_VECOFS		0x00000000
+#define XCHAL_INTLEVEL3_VECTOR_VADDR	0x40000260
+#define XCHAL_INTLEVEL3_VECTOR_PADDR	0x40000260
+#define XCHAL_INTLEVEL4_VECOFS		0x00000000
+#define XCHAL_INTLEVEL4_VECTOR_VADDR	0x40000390
+#define XCHAL_INTLEVEL4_VECTOR_PADDR	0x40000390
+#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL4_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL4_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL4_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS		0x00000000
+#define XCHAL_NMI_VECTOR_VADDR		0x400003B0
+#define XCHAL_NMI_VECTOR_PADDR		0x400003B0
+#define XCHAL_INTLEVEL5_VECOFS		XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL5_VECTOR_VADDR	XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL5_VECTOR_PADDR	XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		2	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		2	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	1	/* faster OCD option */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See core-matmap.h header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		1	/* one way maps I+D 4GB vaddr */
+#define XCHAL_HAVE_IDENTITY_MAP		1	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	1	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		0	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+
+#define XCHAL_MMU_ASID_BITS		0	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			1	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		0	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+
arch/xtensa/variants/s6000/include/variant/tie-asm.h new file +304 -0

304 lines not on this page · raw message

arch/xtensa/variants/s6000/include/variant/tie.h new file +191 -0

191 lines not on this page · raw message

#5 lore raw

PATCH 5/8 xtensa: s6000 variant

In reply to Johannes Weiner

Support for the Xtensa S6000 core variant.

---
 arch/xtensa/Kconfig                                   |    4 
 arch/xtensa/Makefile                                  |    1 
 arch/xtensa/variants/s6000/Makefile                   |    3 
 arch/xtensa/variants/s6000/include/variant/hardware.h |  259 ++++++++++++++++++
 arch/xtensa/variants/s6000/include/variant/irq.h      |    9 
 arch/xtensa/variants/s6000/irq.c                      |   74 +++++
 6 files changed, 350 insertions(+)
 create mode 100644 arch/xtensa/include/asm/gpio.h
 create mode 100644 arch/xtensa/variants/s6000/Makefile
 create mode 100644 arch/xtensa/variants/s6000/gpio.c
 create mode 100644 arch/xtensa/variants/s6000/include/variant/hardware.h
 create mode 100644 arch/xtensa/variants/s6000/include/variant/irq.h
 create mode 100644 arch/xtensa/variants/s6000/irq.c
arch/xtensa/Kconfig +4 -0
@@ -69,6 +69,10 @@ config XTENSA_VARIANT_DC232B
 	select MMU
 	help
 	  This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).
+
+config XTENSA_VARIANT_S6000
+	bool "s6000 - Stretch software configurable processor"
+	select VARIANT_IRQ_SWITCH
 endchoice
 
 config XTENSA_UNALIGNED_USER
arch/xtensa/Makefile +1 -0
@@ -15,6 +15,7 @@
 
 variant-$(CONFIG_XTENSA_VARIANT_FSF)		:= fsf
 variant-$(CONFIG_XTENSA_VARIANT_DC232B)		:= dc232b
+variant-$(CONFIG_XTENSA_VARIANT_S6000)		:= s6000
 variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM)	:= custom
 
 VARIANT = $(variant-y)
arch/xtensa/variants/s6000/Makefile new file +3 -0
@@ -0,0 +1,3 @@
+# s6000 Makefile
+
+obj-y		+= irq.o
arch/xtensa/variants/s6000/include/variant/hardware.h new file +259 -0

259 lines not on this page · raw message

arch/xtensa/variants/s6000/include/variant/irq.h new file +9 -0
@@ -0,0 +1,9 @@
+#ifndef __XTENSA_S6000_IRQ_H
+#define __XTENSA_S6000_IRQ_H
+
+#define NO_IRQ		(-1)
+
+extern void variant_irq_enable(unsigned int irq);
+extern void variant_irq_disable(unsigned int irq);
+
+#endif /* __XTENSA_S6000_IRQ_H */
arch/xtensa/variants/s6000/irq.c new file +74 -0

74 lines not on this page · raw message

#6 lore raw

PATCH 6/8 xtensa: s6000 gpio driver

In reply to Johannes Weiner

From: Oskar Schirmer <[email protected]>

Implement the s6000 gpio controller as a chip for the generic gpio lib.

---
 arch/xtensa/Kconfig                 |    4 ++
 arch/xtensa/include/asm/gpio.h      |   56 ++++++++++++++++++++++++++++
 arch/xtensa/variants/s6000/Makefile |    2 -
 arch/xtensa/variants/s6000/gpio.c   |   71 ++++++++++++++++++++++++++++++++++++
 4 files changed, 132 insertions(+), 1 deletion(-)
arch/xtensa/Kconfig +4 -0
@@ -32,6 +32,9 @@ config GENERIC_HWEIGHT
 config GENERIC_HARDIRQS
 	def_bool y
 
+config GENERIC_GPIO
+	def_bool y
+
 config ARCH_HAS_ILOG2_U32
 	def_bool n
 
@@ -73,6 +76,7 @@ config XTENSA_VARIANT_DC232B
 config XTENSA_VARIANT_S6000
 	bool "s6000 - Stretch software configurable processor"
 	select VARIANT_IRQ_SWITCH
+	select ARCH_REQUIRE_GPIOLIB
 endchoice
 
 config XTENSA_UNALIGNED_USER
arch/xtensa/include/asm/gpio.h new file +56 -0

56 lines not on this page · raw message

arch/xtensa/variants/s6000/Makefile +1 -1
@@ -1,3 +1,3 @@
 # s6000 Makefile
 
-obj-y		+= irq.o
+obj-y		+= irq.o gpio.o
arch/xtensa/variants/s6000/gpio.c new file +71 -0

71 lines not on this page · raw message

#7 lore raw

PATCH 7/8 xtensa: let platform override KERNELOFFSET

In reply to Johannes Weiner

The linker script should not assume a fix offset in memory for the kernel, this is platform-specific, so let the platform set it.

---
 arch/xtensa/kernel/vmlinux.lds.S |    3 +++
 1 file changed, 3 insertions(+)
arch/xtensa/kernel/vmlinux.lds.S +3 -0
@@ -17,6 +17,7 @@
 #include <asm-generic/vmlinux.lds.h>
 
 #include <variant/core.h>
+#include <platform/hardware.h>
 OUTPUT_ARCH(xtensa)
 ENTRY(_start)
 
@@ -26,7 +27,9 @@ jiffies = jiffies_64 + 4;
 jiffies = jiffies_64;
 #endif
 
+#ifndef KERNELOFFSET
 #define KERNELOFFSET 0xd0001000
+#endif
 
 /* Note: In the following macros, it would be nice to specify only the
    vector name and section kind and construct "sym" and "section" using
#8 lore raw

PATCH 8/8 xtensa: platform stretch s6105 eval board

In reply to Johannes Weiner

Support for the Stretch S6105 evaluation board.

---
 arch/xtensa/Kconfig                                     |    4 
 arch/xtensa/Makefile                                    |    1 
 arch/xtensa/configs/s6105_defconfig                     |  530 ++++++++++++++++
 arch/xtensa/platforms/s6105/Makefile                    |    3 
 arch/xtensa/platforms/s6105/device.c                    |   67 ++
 arch/xtensa/platforms/s6105/include/platform/gpio.h     |   27 
 arch/xtensa/platforms/s6105/include/platform/hardware.h |   11 
 arch/xtensa/platforms/s6105/include/platform/serial.h   |    8 
 arch/xtensa/platforms/s6105/setup.c                     |   61 +
 9 files changed, 712 insertions(+)
 create mode 100644 arch/xtensa/configs/s6105_defconfig
 create mode 100644 arch/xtensa/platforms/s6105/Makefile
 create mode 100644 arch/xtensa/platforms/s6105/device.c
 create mode 100644 arch/xtensa/platforms/s6105/include/platform/hardware.h
 create mode 100644 arch/xtensa/platforms/s6105/include/platform/serial.h
 create mode 100644 arch/xtensa/platforms/s6105/setup.c
arch/xtensa/Kconfig +4 -0
@@ -159,6 +159,10 @@ config XTENSA_PLATFORM_XT2000
 	  XT2000 is the name of Tensilica's feature-rich emulation platform.
 	  This hardware is capable of running a full Linux distribution.
 
+config XTENSA_PLATFORM_S6105
+	bool "S6105"
+	select SERIAL_CONSOLE
+
 endchoice
 
 
arch/xtensa/Makefile +1 -0
@@ -25,6 +25,7 @@ export VARIANT
 
 platform-$(CONFIG_XTENSA_PLATFORM_XT2000)	:= xt2000
 platform-$(CONFIG_XTENSA_PLATFORM_ISS)		:= iss
+platform-$(CONFIG_XTENSA_PLATFORM_S6105)	:= s6105
 
 PLATFORM = $(platform-y)
 export PLATFORM
arch/xtensa/configs/s6105_defconfig new file +530 -0

530 lines not on this page · raw message

arch/xtensa/platforms/s6105/Makefile new file +3 -0
@@ -0,0 +1,3 @@
+# Makefile for the Stretch S6105 eval board
+
+obj-y		:= setup.o device.o
arch/xtensa/platforms/s6105/device.c new file +67 -0

67 lines not on this page · raw message

arch/xtensa/platforms/s6105/include/platform/hardware.h new file +11 -0
@@ -0,0 +1,11 @@
+#ifndef __XTENSA_S6105_HARDWARE_H
+#define __XTENSA_S6105_HARDWARE_H
+
+#define PLATFORM_DEFAULT_MEM_START	0x40000000
+#define PLATFORM_DEFAULT_MEM_SIZE	0x08000000
+
+#define MAX_DMA_ADDRESS			0
+
+#define KERNELOFFSET			(PLATFORM_DEFAULT_MEM_START + 0x1000)
+
+#endif /* __XTENSA_S6105_HARDWARE_H */
arch/xtensa/platforms/s6105/include/platform/serial.h new file +8 -0
@@ -0,0 +1,8 @@
+#ifndef __ASM_XTENSA_S6105_SERIAL_H
+#define __ASM_XTENSA_S6105_SERIAL_H
+
+#include <variant/hardware.h>
+
+#define BASE_BAUD (S6_SCLK / 16)
+
+#endif /* __ASM_XTENSA_S6105_SERIAL_H */
arch/xtensa/platforms/s6105/setup.c new file +61 -0

61 lines not on this page · raw message

arch/xtensa/platforms/s6105/include/platform/gpio.h new file +27 -0
@@ -0,0 +1,27 @@
+#ifndef __ASM_XTENSA_S6105_GPIO_H
+#define __ASM_XTENSA_S6105_GPIO_H
+
+#define GPIO_BP_TEMP_ALARM	0
+#define GPIO_PB_RESET_IN	1
+#define GPIO_EXP_IRQ		2
+#define GPIO_TRIGGER_IRQ	3
+#define GPIO_RTC_IRQ		4
+#define GPIO_PHY_IRQ		5
+#define GPIO_IMAGER_RESET	6
+#define GPIO_SD_IRQ		7
+#define GPIO_MINI_BOOT_INH	8
+#define GPIO_BOARD_RESET	9
+#define GPIO_EXP_PRESENT	10
+#define GPIO_LED1_NGREEN	12
+#define GPIO_LED1_RED		13
+#define GPIO_LED0_NGREEN	14
+#define GPIO_LED0_NRED		15
+#define GPIO_SPI_CS0		16
+#define GPIO_SPI_CS1		17
+#define GPIO_SPI_CS3		19
+#define GPIO_SPI_CS4		20
+#define GPIO_SD_WP		21
+#define GPIO_BP_RESET		22
+#define GPIO_ALARM_OUT		23
+
+#endif /* __ASM_XTENSA_S6105_GPIO_H */
#0 lore raw

cover xtensa: s6000 & s6105

Hi,

here is the core series of our s6000 port.

First comes the nommu patch. Right now we use CONFIG_MMU for everything that separates the S6000 from existing ports, memorywise. This is a lot easier and can still be broken up by newer ports when they have requirements with finer granularity. Furthermore, we have only this one nommu box here, so we couldn't test an MMU architecture and therefor not say for sure we didn't break anything ;)

Then comes the core variant stuff. We are the first variant that needs to ship code files, so there is a prereq patch that allows that.

The inclusion of the GPIO driver is a bit arbitrary. It was the only one left after stripping out all real peripheral support because we initially used GPIO in platform_setup(). I send it now to have an example on variant-specific code and conceptual improvements can then be excercised on it.

The platform patch is fairly trivial. One more requirement is that our platform can define the kernel text offset. We can not use a fixed virtual address (nommu, remember? ;)) but have to provide a physical one that is within bounds of our actual RAM.

The diffstat looks a bit overwhelming, but note that most of it is the defconfig, the tensilica core definitions and address definitions where the core has registers mapped.

Hannes

 arch/xtensa/Kconfig                                |   15 +
 arch/xtensa/Makefile                               |    5 +
 arch/xtensa/configs/s6105_defconfig                |  530 ++++++++++++++++++++
 arch/xtensa/include/asm/cacheflush.h               |   10 +-
 arch/xtensa/include/asm/dma.h                      |    3 +-
 arch/xtensa/include/asm/gpio.h                     |   56 ++
 arch/xtensa/include/asm/io.h                       |    9 +-
 arch/xtensa/include/asm/irq.h                      |    7 +
 arch/xtensa/include/asm/mmu.h                      |    5 +
 arch/xtensa/include/asm/mmu_context.h              |    5 +
 arch/xtensa/include/asm/nommu.h                    |    3 +
 arch/xtensa/include/asm/nommu_context.h            |   25 +
 arch/xtensa/include/asm/page.h                     |    9 +-
 arch/xtensa/include/asm/pgtable.h                  |   13 +-
 arch/xtensa/include/asm/processor.h                |    6 +
 arch/xtensa/kernel/entry.S                         |    3 +-
 arch/xtensa/kernel/head.S                          |    3 +-
 arch/xtensa/kernel/irq.c                           |   14 +
 arch/xtensa/kernel/setup.c                         |    7 +
 arch/xtensa/kernel/traps.c                         |    2 +
 arch/xtensa/kernel/vectors.S                       |    4 +
 arch/xtensa/kernel/vmlinux.lds.S                   |    3 +
 arch/xtensa/mm/Makefile                            |    3 +-
 arch/xtensa/mm/init.c                              |   62 +---
 arch/xtensa/mm/misc.S                              |    2 +
 arch/xtensa/mm/mmu.c                               |   70 +++
 arch/xtensa/platforms/s6105/Makefile               |    3 +
 arch/xtensa/platforms/s6105/device.c               |   67 +++
 .../xtensa/platforms/s6105/include/platform/gpio.h |   27 +
 .../platforms/s6105/include/platform/hardware.h    |   11 +
 .../platforms/s6105/include/platform/serial.h      |    8 +
 arch/xtensa/platforms/s6105/setup.c                |   61 +++
 arch/xtensa/variants/dc232b/Makefile               |    1 +
 arch/xtensa/variants/fsf/Makefile                  |    1 +
 arch/xtensa/variants/s6000/Makefile                |    3 +
 arch/xtensa/variants/s6000/gpio.c                  |   71 +++
 arch/xtensa/variants/s6000/include/variant/core.h  |  431 ++++++++++++++++
 .../variants/s6000/include/variant/hardware.h      |  259 ++++++++++
 arch/xtensa/variants/s6000/include/variant/irq.h   |    9 +
 .../variants/s6000/include/variant/tie-asm.h       |  304 +++++++++++
 arch/xtensa/variants/s6000/include/variant/tie.h   |  191 +++++++
 arch/xtensa/variants/s6000/irq.c                   |   74 +++
 42 files changed, 2320 insertions(+), 75 deletions(-)