Coldfire generic GPIO (m68knommu)
RFC 6/14 Coldfire generic GPIO (m68knommu)
Signed-off-by Steven King <[email protected]>
arch/m68k/include/asm/m5249sim.h +14 -9
@@ -73,14 +73,14 @@/* * General purpose IO registers (in MBAR2). */ -#define MCFSIM2_GPIOREAD 0x0/* GPIO read values */ -#define MCFSIM2_GPIOWRITE 0x4/* GPIO write values */ -#define MCFSIM2_GPIOENABLE 0x8/* GPIO enabled */ -#define MCFSIM2_GPIOFUNC 0xc/* GPIO function */ -#define MCFSIM2_GPIO1READ 0xb0/* GPIO1 read values */ -#define MCFSIM2_GPIO1WRITE 0xb4/* GPIO1 write values */ -#define MCFSIM2_GPIO1ENABLE 0xb8/* GPIO1 enabled */ -#define MCFSIM2_GPIO1FUNC 0xbc/* GPIO1 function */ +#define MCFSIM2_GPIOREAD (MCF_MBAR2 + 0x000)/* GPIO read values */ +#define MCFSIM2_GPIOWRITE (MCF_MBAR2 + 0x004)/* GPIO write values */ +#define MCFSIM2_GPIOENABLE (MCF_MBAR2 + 0x008)/* GPIO enabled */ +#define MCFSIM2_GPIOFUNC (MCF_MBAR2 + 0x00C)/* GPIO function */ +#define MCFSIM2_GPIO1READ (MCF_MBAR2 + 0x0B0)/* GPIO1 read values */ +#define MCFSIM2_GPIO1WRITE (MCF_MBAR2 + 0x0B4)/* GPIO1 write values */ +#define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8)/* GPIO1 enabled */ +#define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC)/* GPIO1 function */ #define MCFSIM2_GPIOINTSTAT 0xc0/* GPIO interrupt status */ #define MCFSIM2_GPIOINTCLEAR 0xc0/* GPIO interrupt clear */
@@ -100,7 +100,12 @@#define MCFSIM2_IDECONFIG1 0x18c/* IDEconfig1 */ #define MCFSIM2_IDECONFIG2 0x190/* IDEconfig2 */ - +/* +* Generic GPIO support +*/ +#define MCFGPIO_PIN_MAX 64 +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1/* * Macro to set IMR register. It is 32 bits on the 5249. */
Signature · 1 line
Steven King -- sfking at fdwdc dot com