Skip to contentSkip to conversation

New ASUS 1701 bios for M2N SLI DELUXE

DISCUSSION Gene Heskett 3 participants 6 messages Mar 13, 2009 – Mar 14, 2009

lore
Share & tools
lore
#0 lore raw

Hi Robin, David and lkml list;

I said I would report.

I just reinstalled the 1502 version bios after spending the last 2 days trying to get an hours worth of uptime without an oops. Gave up.

David Newell and I have been trying to find the cause of the oops, but when the compile instructions David is sending me don't work, its a bit difficult to troubleshoot beyond renaming the function just to see if the oops follows the rename, which it does. And with the boot girations to get a working radeonhd driver now broken again, apparently by the 'make mrproper' that David had me do, I'm now stuck on issue drivers for drm, radeon, and radeonhd and those are noticably slower.

So I'm back on the 1502 version of the bios, it does an oops as I sent before right at entering vmlinuz, which marks me tainted, but the machine is dead stable after that.

Here is another snip of that to refresh memories:

[    0.000000] DMI 2.4 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:404 generic_get_mtrr+0xea/0x120()
[    0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up.
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.28.7 #7
[    0.000000] Call Trace:
[    0.000000]  [<c042858f>] warn_slowpath+0x6f/0x90
[    0.000000]  [<c05193b0>] vsnprintf+0x3c0/0x7e0
[    0.000000]  [<c0627a00>] panic+0x15/0xee
[    0.000000]  [<c041a78c>] pat_init+0x7c/0xa0
[    0.000000]  [<c040f9fc>] post_set+0x1c/0x50
[    0.000000]  [<c0733f35>] dmi_string_nosave+0x4c/0x6d
[    0.000000]  [<c0441031>] up+0x11/0x40
[    0.000000]  [<c040f7ea>] generic_get_mtrr+0xea/0x120
[    0.000000]  [<c071f91f>] mtrr_trim_uncached_memory+0x7d/0x374
[    0.000000]  [<c042e583>] request_resource+0xa3/0x150
[    0.000000]  [<c0627af0>] printk+0x17/0x1f
[    0.000000]  [<c071be82>] e820_end_pfn+0xb5/0xd3
[    0.000000]  [<c0719fc9>] setup_arch+0x501/0xb68
[    0.000000]  [<c0428d89>] release_console_sem+0x189/0x1d0
[    0.000000]  [<c071d027>] reserve_early_overlap_ok+0x3f/0x47
[    0.000000]  [<c07138a4>] start_kernel+0x58/0x314
[    0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---

So based on that, I'll now go build a 2.6.29-rc8 and see how that runs.

The biggest problem with the 2.6.29 series is that apparently, for security reasons, they are now doing a PHY disable in a graceful shutdown, which none of the previous kernels knows how to re-enable.

So to reboot to the 2.6.28.7 stable, you have to use the front panel reset button to reboot or you will not have any onboard ethernet until you do a full, pull ALL the power plugs for at least 30 seconds (I go make a cup of tea, about 3 minutes) to reset the PHY's back to operational status. TBT, the reset button is easier.

Frankly, that seems like a thoroughly busted security idea, but I suppose we're stuck with it.

It also seems to me, that to mark my kernel as tainted over a fix-up that makes the system dead stable, is executing the messenger. IMNSHO, its ASUS who ought to be shot for not having any method of filing a bug report against their crappy bios. 3 emails sent to the only address I was able to find for ASUS have had the same effect as sending them to /dev/null.

If anyone on the LKML knows how to contact ASUS, please advise them that there is at least one VERY unhappy camper/user of the
$285 USD M2N SLI DELUXE motherboard, I'm sorry I ever laid eyes on it. The newly released version 1701 bios (it unzips as M2N-SLI-Deluxe-1701.BIN) still doesn't get it right AFAIAC. The kernel writers at least know what to do about the older version bios. Maybe ASUS coded the new bios to get past your test, but is it still fscked? That is certainly my opinion...

Thanks everybody. Now back to your regularly scheduled programming. :)

Signature · 7 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
US Navy uses NT. Saddam, Gadafi, it's party time!

   -- Havlik Denis
#1 lore raw
Quoted 31 lines · Gene Heskett

Hi Robin, David and lkml list;

I said I would report.

I just reinstalled the 1502 version bios after spending the last 2 days trying to get an hours worth of uptime without an oops. Gave up.

David Newell and I have been trying to find the cause of the oops, but when the compile instructions David is sending me don't work, its a bit difficult to troubleshoot beyond renaming the function just to see if the oops follows the rename, which it does. And with the boot girations to get a working radeonhd driver now broken again, apparently by the 'make mrproper' that David had me do, I'm now stuck on issue drivers for drm, radeon, and radeonhd and those are noticably slower.

So I'm back on the 1502 version of the bios, it does an oops as I sent before right at entering vmlinuz, which marks me tainted, but the machine is dead stable after that.

Here is another snip of that to refresh memories:

[    0.000000] DMI 2.4 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:404 generic_get_mtrr+0xea/0x120()
[    0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up.
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.28.7 #7
[    0.000000] Call Trace:
[    0.000000]  [<c042858f>] warn_slowpath+0x6f/0x90
[    0.000000]  [<c05193b0>] vsnprintf+0x3c0/0x7e0
[    0.000000]  [<c0627a00>] panic+0x15/0xee
[    0.000000]  [<c041a78c>] pat_init+0x7c/0xa0
[    0.000000]  [<c040f9fc>] post_set+0x1c/0x50
[    0.000000]  [<c0733f35>] dmi_string_nosave+0x4c/0x6d
[    0.000000]  [<c0441031>] up+0x11/0x40
[    0.000000]  [<c040f7ea>] generic_get_mtrr+0xea/0x120
[    0.000000]  [<c071f91f>] mtrr_trim_uncached_memory+0x7d/0x374
Quoted 8 lines
[    0.000000]  [<c042e583>] request_resource+0xa3/0x150
[    0.000000]  [<c0627af0>] printk+0x17/0x1f
[    0.000000]  [<c071be82>] e820_end_pfn+0xb5/0xd3
[    0.000000]  [<c0719fc9>] setup_arch+0x501/0xb68
[    0.000000]  [<c0428d89>] release_console_sem+0x189/0x1d0
[    0.000000]  [<c071d027>] reserve_early_overlap_ok+0x3f/0x47
[    0.000000]  [<c07138a4>] start_kernel+0x58/0x314
[    0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---

That's not an oops, it's a warning. Those do normally taint the kernel. I don't think this should really be a WARN, IMHO, as it's a BIOS bug and not the kernel's fault, and it's fixed up the problem. CCing Yinghai Lu, which it looks like wrote this warning.

Quoted 9 lines

So based on that, I'll now go build a 2.6.29-rc8 and see how that runs.

The biggest problem with the 2.6.29 series is that apparently, for security reasons, they are now doing a PHY disable in a graceful shutdown, which none of the previous kernels knows how to re-enable.

So to reboot to the 2.6.28.7 stable, you have to use the front panel reset button to reboot or you will not have any onboard ethernet until you do a full, pull ALL the power plugs for at least 30 seconds (I go make a cup of tea, about 3 minutes) to reset the PHY's back to operational status. TBT, the reset button is easier.

Frankly, that seems like a thoroughly busted security idea, but I suppose we're stuck with it.

I doubt it's for security reasons. Could be due to power management or suspend/resume changes?

Quoted 9 lines

It also seems to me, that to mark my kernel as tainted over a fix-up that makes the system dead stable, is executing the messenger. IMNSHO, its ASUS who ought to be shot for not having any method of filing a bug report against their crappy bios. 3 emails sent to the only address I was able to find for ASUS have had the same effect as sending them to /dev/null.

If anyone on the LKML knows how to contact ASUS, please advise them that there is at least one VERY unhappy camper/user of the $285 USD M2N SLI DELUXE motherboard, I'm sorry I ever laid eyes on it. The newly released version 1701 bios (it unzips as M2N-SLI-Deluxe-1701.BIN) still doesn't get it right AFAIAC. The kernel writers at least know what to do about the older version bios. Maybe ASUS coded the new bios to get
past your test, but is it still fscked? That is certainly my opinion...

Thanks everybody. Now back to your regularly scheduled programming. :)

#2 lore raw
Quoted 53 lines · Robert Hancock
Quoted 43 lines · Gene Heskett

Hi Robin, David and lkml list;

I said I would report.

I just reinstalled the 1502 version bios after spending the last 2 days trying to get an hours worth of uptime without an oops.  Gave up.

David Newell and I have been trying to find the cause of the oops, but when the compile instructions David is sending me don't work, its a bit difficult to troubleshoot beyond renaming the function just to see if the oops follows the rename, which it does.  And with the boot girations to get a working radeonhd driver now broken again, apparently by the 'make mrproper' that David had me do, I'm now stuck on issue drivers for drm, radeon, and radeonhd and those are noticably slower.

So I'm back on the 1502 version of the bios, it does an oops as I sent before right at entering vmlinuz, which marks me tainted, but the machine is dead stable after that.

Here is another snip of that to refresh memories:
[    0.000000] DMI 2.4 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:404 generic_get_mtrr+0xea/0x120()
[    0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up. [    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.28.7 #7
[    0.000000] Call Trace:
[    0.000000]  [<c042858f>] warn_slowpath+0x6f/0x90
[    0.000000]  [<c05193b0>] vsnprintf+0x3c0/0x7e0
[    0.000000]  [<c0627a00>] panic+0x15/0xee
[    0.000000]  [<c041a78c>] pat_init+0x7c/0xa0
[    0.000000]  [<c040f9fc>] post_set+0x1c/0x50
[    0.000000]  [<c0733f35>] dmi_string_nosave+0x4c/0x6d
[    0.000000]  [<c0441031>] up+0x11/0x40
[    0.000000]  [<c040f7ea>] generic_get_mtrr+0xea/0x120
[    0.000000]  [<c071f91f>] mtrr_trim_uncached_memory+0x7d/0x374

Quoted 8 lines

[    0.000000]  [<c042e583>] request_resource+0xa3/0x150 [    0.000000]  [<c0627af0>] printk+0x17/0x1f
[    0.000000]  [<c071be82>] e820_end_pfn+0xb5/0xd3
[    0.000000]  [<c0719fc9>] setup_arch+0x501/0xb68
[    0.000000]  [<c0428d89>] release_console_sem+0x189/0x1d0 [    0.000000]  [<c071d027>] reserve_early_overlap_ok+0x3f/0x47 [    0.000000]  [<c07138a4>] start_kernel+0x58/0x314 [    0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---

Quoted 4 lines

That's not an oops, it's a warning. Those do normally taint the kernel. I don't think this should really be a WARN, IMHO, as it's a BIOS bug and not the kernel's fault, and it's fixed up the problem. CCing Yinghai Lu, which it looks like wrote this warning.

need to tone down the warning?

Quoted 14 lines
Quoted 14 lines

So based on that, I'll now go build a 2.6.29-rc8 and see how that runs.

The biggest problem with the 2.6.29 series is that apparently, for security reasons, they are now doing a PHY disable in a graceful shutdown, which none of the previous kernels knows how to re-enable.

So to reboot to the 2.6.28.7 stable, you have to use the front panel reset button to reboot or you will not have any onboard ethernet until you do a full, pull ALL the power plugs for at least 30 seconds (I go make a cup of tea, about 3 minutes) to reset the PHY's back to operational status. TBT, the reset button is easier.

Quoted 5 lines
Quoted 2 lines

Frankly, that seems like a thoroughly busted security idea, but I suppose we're stuck with it.

I doubt it's for security reasons. Could be due to power management or suspend/resume changes?

what is nic? could be put in D3 somehow.

YH

#3 lore raw
Quoted 8 lines · Yinghai Lu
Quoted 7 lines · Robert Hancock
Quoted 6 lines · Gene Heskett

Hi Robin, David and lkml list;

I said I would report.

I just reinstalled the 1502 version bios after spending the last 2 days trying to get an hours worth of uptime without an oops.  Gave up.

[...]

Quoted 6 lines
Quoted 4 lines

That's not an oops, it's a warning. Those do normally taint the kernel. I don't think this should really be a WARN, IMHO, as it's a BIOS bug and not the kernel's fault, and it's fixed up the problem. CCing Yinghai Lu, which it looks like wrote this warning.

need to tone down the warning?

Yes, please & thank you. And maybe look at the tests that determine its bad and has to be fixed. IMO, something fubar in the later bios versions is getting by that test. Results are extremely unstable with either the 1604beta or 1701 versions of that bios. 1502 does trigger the fix, and the fix is pure gold.

Quoted 15 lines
Quoted 15 lines
Quoted 14 lines

So based on that, I'll now go build a 2.6.29-rc8 and see how that runs.

The biggest problem with the 2.6.29 series is that apparently, for security reasons, they are now doing a PHY disable in a graceful shutdown, which none of the previous kernels knows how to re-enable.

So to reboot to the 2.6.28.7 stable, you have to use the front panel reset button to reboot or you will not have any onboard ethernet until you do a full, pull ALL the power plugs for at least 30 seconds (I go make a cup of tea, about 3 minutes) to reset the PHY's back to operational status. TBT, the reset button is easier.

Frankly, that seems like a thoroughly busted security idea, but I suppose we're stuck with it.

Quoted 6 lines
Quoted 2 lines

I doubt it's for security reasons. Could be due to power management or suspend/resume changes?

what is nic? could be put in D3 somehow.

YH

The nic's (2 of them) are in the motherboards MCP55 chipset according to what I have been told.

Signature · 7 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Mencken and Nathan's Ninth Law of The Average American:
	The quality of a champagne is judged by the amount of noise the
	cork makes when it is popped.
#4 lore raw
Quoted 5 lines · Gene Heskett
Quoted 3 lines

what is nic? could be put in D3 somehow.

The nic's (2 of them) are in the motherboards MCP55 chipset according to what I have been told.

forcedeth already has D3hot workaround. so could other problem

YH

#5 lore raw
In reply to Robert Hancock
Quoted 49 lines · Robert Hancock
Quoted 39 lines · Gene Heskett

Hi Robin, David and lkml list;

I said I would report.

I just reinstalled the 1502 version bios after spending the last 2 days trying to get an hours worth of uptime without an oops. Gave up.

David Newell and I have been trying to find the cause of the oops, but when the compile instructions David is sending me don't work, its a bit difficult to troubleshoot beyond renaming the function just to see if the oops follows the rename, which it does. And with the boot girations to get a working radeonhd driver now broken again, apparently by the 'make mrproper' that David had me do, I'm now stuck on issue drivers for drm, radeon, and radeonhd and those are noticably slower.

So I'm back on the 1502 version of the bios, it does an oops as I sent before right at entering vmlinuz, which marks me tainted, but the machine is dead stable after that.

Here is another snip of that to refresh memories:

[    0.000000] DMI 2.4 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it
around. [    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106 [    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:404
generic_get_mtrr+0xea/0x120() [    0.000000] mtrr: your BIOS has set up an
incorrect mask, fixing it up. [    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.28.7 #7
[    0.000000] Call Trace:
[    0.000000]  [<c042858f>] warn_slowpath+0x6f/0x90
[    0.000000]  [<c05193b0>] vsnprintf+0x3c0/0x7e0
[    0.000000]  [<c0627a00>] panic+0x15/0xee
[    0.000000]  [<c041a78c>] pat_init+0x7c/0xa0
[    0.000000]  [<c040f9fc>] post_set+0x1c/0x50
[    0.000000]  [<c0733f35>] dmi_string_nosave+0x4c/0x6d
[    0.000000]  [<c0441031>] up+0x11/0x40
[    0.000000]  [<c040f7ea>] generic_get_mtrr+0xea/0x120
[    0.000000]  [<c071f91f>] mtrr_trim_uncached_memory+0x7d/0x374
Quoted 8 lines
[    0.000000]  [<c042e583>] request_resource+0xa3/0x150
[    0.000000]  [<c0627af0>] printk+0x17/0x1f
[    0.000000]  [<c071be82>] e820_end_pfn+0xb5/0xd3
[    0.000000]  [<c0719fc9>] setup_arch+0x501/0xb68
[    0.000000]  [<c0428d89>] release_console_sem+0x189/0x1d0
[    0.000000]  [<c071d027>] reserve_early_overlap_ok+0x3f/0x47
[    0.000000]  [<c07138a4>] start_kernel+0x58/0x314
[    0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
Quoted 4 lines

That's not an oops, it's a warning. Those do normally taint the kernel. I don't think this should really be a WARN, IMHO, as it's a BIOS bug and not the kernel's fault, and it's fixed up the problem. CCing Yinghai Lu, which it looks like wrote this warning.

I agree, the fix it does is solid. For the later bios releases, is it possible that the checks are incomplete, and the later bios sneaks a broken map past mtrr somehow? My nearly 60 years of troubleshooting stuff with circuits in it says that's the best reason I can come up with. This, for me is somewhat like trying to nail jelly to a tree in an environment this complex.

Quoted 1 line
Quoted 1 line

So based on that, I'll now go build a 2.6.29-rc8 and see how that runs.

And its running nicely so far, about 5:55 in uptime, but I turned off all the selinux stuff, 10 thousand warnings about fetchmail popping up at 90 second intervals just got old, and Daniel doesn't seem to fix it in 2 more fixes so far.

Quoted 10 lines
Quoted 10 lines

The biggest problem with the 2.6.29 series is that apparently, for security reasons, they are now doing a PHY disable in a graceful shutdown, which none of the previous kernels knows how to re-enable.

So to reboot to the 2.6.28.7 stable, you have to use the front panel reset button to reboot or you will not have any onboard ethernet until you do a full, pull ALL the power plugs for at least 30 seconds (I go make a cup of tea, about 3 minutes) to reset the PHY's back to operational status. TBT, the reset button is easier.

Quoted 5 lines
Quoted 2 lines

Frankly, that seems like a thoroughly busted security idea, but I suppose we're stuck with it.

I doubt it's for security reasons. Could be due to power management or suspend/resume changes?

No idea, other than its a PIMA. :-) And if for suspend/resume reasons, with a WOL setup, it certainly kills any chance of WOL working.

Quoted 15 lines
Quoted 15 lines

It also seems to me, that to mark my kernel as tainted over a fix-up that makes the system dead stable, is executing the messenger. IMNSHO, its ASUS who ought to be shot for not having any method of filing a bug report against their crappy bios. 3 emails sent to the only address I was able to find for ASUS have had the same effect as sending them to /dev/null.

If anyone on the LKML knows how to contact ASUS, please advise them that there is at least one VERY unhappy camper/user of the
$285 USD M2N SLI DELUXE motherboard, I'm sorry I ever laid eyes on it. The newly released version 1701 bios (it unzips as M2N-SLI-Deluxe-1701.BIN) still doesn't get it right AFAIAC. The kernel writers at least know what to do about the older version bios. Maybe ASUS coded the new bios to get past your test, but is it still fscked? That is certainly my opinion...

Quoted 1 line
Quoted 1 line

Thanks everybody. Now back to your regularly scheduled programming. :)

Repeat, thanks everybody.

Signature · 6 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
He hadn't a single redeeming vice.
		-- Oscar Wilde