df -h shows ~10 times bigger size when umounting pendrive
I have 1GiB pendrive:
[ 1494.641661] scsi 4:0:0:0: Direct-Access GOODDRIVE 1100 PQ: 0 ANSI: 0 CCS [ 1494.643482] sd 4:0:0:0: [sdb] 1957888 512-byte hardware sectors: (1.00 GB/956 MiB) [ 1494.644599] sd 4:0:0:0: [sdb] Write Protect is off [ 1494.644604] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 1494.644609] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1494.647107] sd 4:0:0:0: [sdb] 1957888 512-byte hardware sectors: (1.00 GB/956 MiB) [ 1494.648224] sd 4:0:0:0: [sdb] Write Protect is off [ 1494.648230] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 1494.648234] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1494.648241] sdb: sdb1 [ 1494.657345] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 1494.657564] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1494.658212] usb-storage: device scan complete
pendrive was mounted on /media/floppy
[arekm@t400 ~]$ df -h
System plik�w rozm. u�yte dost. %u�. zamont. na
/dev/sda3 9,6G 4,2G 5,5G 44% / /dev/mapper/home 127G 52G 75G 42% /home tmpfs 1,0G 28K 1,0G 1% /tmp none 2,0G 12K 2,0G 1% /dev/shm /dev/sdb1 956M 657M 299M 69% /media/floppy
then I copied 650MB file and run umount /media/floppy
While umount was running and data were synced on the pendrive df -h showed:
[arekm@t400 ~]$ df -h
System plik�w rozm. u�yte dost. %u�. zamont. na
/dev/sda3 9,6G 4,2G 5,5G 44% / /dev/mapper/home 127G 52G 75G 42% /home tmpfs 1,0G 28K 1,0G 1% /tmp none 2,0G 12K 2,0G 1% /dev/shm /dev/sdb1 9,6G 4,2G 5,5G 44% /media/floppy
So it started to show 9.6G size when in process of umount.
Doesn't sound "normal" and correct.
[arekm@t400 ~]$ uname -a
Linux t400 2.6.29-rc8 #105 SMP Sun Mar 22 00:47:52 CET 2009 x86_64 Intel(R)_Core(TM)2_Duo_CPU_____T9400__@_2.53GHz PLD Linux
(actually from git from about 1 hour ago)
Signature · 2 lines
Arkadiusz Miśkiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/
Quoted 8 lines · Arkadiusz Miskiewicz
While umount was running and data were synced on the pendrive df -h showed:
[arekm@t400 ~]$ df -h
System plik�w rozm. u�yte dost. %u�. zamont. na/dev/sda3 9,6G 4,2G 5,5G 44% / /dev/sdb1 9,6G 4,2G 5,5G 44% /media/floppy
This looks to me like a race between umount and df. By the time df had read mtab (to find the mounted filesystem), the pen drive had already been unmounted; but umount hadn't yet updated mtab. It's a pretty trivial sort of fault, and not worth worrying about.
Quoted 9 lines · David Newall
Quoted 7 lines · Arkadiusz Miskiewicz
While umount was running and data were synced on the pendrive df -h showed:
[arekm@t400 ~]$ df -h
System plik�w rozm. u�yte dost. %u�. zamont. na/dev/sda3 9,6G 4,2G 5,5G 44% / /dev/sdb1 9,6G 4,2G 5,5G 44% /media/floppy
Quoted 4 lines
This looks to me like a race between umount and df. By the time df had read mtab (to find the mounted filesystem), the pen drive had already been unmounted; but umount hadn't yet updated mtab. It's a pretty trivial sort of fault, and not worth worrying about.
It's not that. umounting takes more than 15 seconds (syncing 650MB of data takes some time) and in that ~15 seconds I reliably get such results:
/etc/mtab contains:
/dev/sdb1 /media/floppy vfat rw 0 0
statfs() returns:
statfs("/media/floppy", {f_type=0x58465342, f_bsize=4096, f_blocks=2497555, f_bfree=1410716, f_bavail=1410716, f_files=10000448, f_ffree=9842679, f_fsid={2051, 0}, f_namelen=255, f_frsize=4096}) = 0
which is:
/dev/sdb1 9,6G 4,2G 5,4G 44% /media/floppy
So why statfs() lies on a being unmounted filesystem?
Signature · 2 lines
Arkadiusz Miśkiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/
Quoted 10 lines · Arkadiusz Miskiewicz
/etc/mtabcontains:
/dev/sdb1/media/floppy vfat rw 0 0
statfs()returns:statfs("/media/floppy", {f_type=0x58465342, f_bsize=4096, f_blocks=2497555, f_bfree=1410716, f_bavail=1410716, f_files=10000448, f_ffree=9842679, f_fsid={2051, 0}, f_namelen=255, f_frsize=4096}) = 0
The statfs(), above, is not a stat for the file system at /media/floppy, it's a stat for the file system which *contains* /media/floppy. If /dev/sdb1 has been unmounted (which was in fact in occurring at the time) the stat refers to (in your case) the root filesystem. And look at the returned information: 2497555 4K blocks, 1410716 of them available; that's 9.6GB file system with 5.5GB available, same as /dev/sda3.
Truly, this is what I said it was; and it's normal, and it's reasonable.
Quoted 3 lines
/dev/sdb19,6G 4,2G 5,4G 44% /media/floppySo why
statfs()lies on a being unmounted filesystem?
There is a lie, which is that /media/floppy is on /dev/sdb1. That ceases to be true as soon as the umount starts. The reason df lies is because it trusts the mtab, which has not yet had the entry for /dev/sdb1 removed.