ftrace: oops at probe_wakeup_sched_switch+0xd1/0x1ae
Subsystems (3)
I hit the below oops while playing with "wakeup" tracer. Just enabled tracing and ran "while true; do cat trace; done" on a 8-way systems with -tip at commit 9e25bacc221318a29d37425e054c01047edad7f5.
Attached the .config.
Thanks
Maneesh
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff802d2258>] probe_wakeup_sched_switch+0xd1/0x1ae PGD 219147067 PUD 1e449e067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:0c/0000:0c:00.0/irq CPU 5 Modules linked in: autofs4 hidp rfcomm l2cap bluetooth iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport sg sr_mod ide_cd_mod cdrom serio_raw acpi_memhotplug button tg3 libphy i2c_piix4 i2c_core pcspkr usb_storage uhci_hcd ohci_hcd ehci_hcd aacraid sd_mod scsi_mod ext3 jbd Pid: 5937, comm: cat Not tainted 2.6.29-tip-test #1 eserver xSeries 366-[88632RA]- RIP: 0010:[<ffffffff802d2258>] [<ffffffff802d2258>] probe_wakeup_sched_switch+0xd1/0x1ae RSP: 0000:ffff8801cf4cdea0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88022f232820 RCX: 0000000000000046 RDX: ffff8800281989a0 RSI: ffffffff8020d56d RDI: ffffffff811de480 RBP: ffff8801cf4cded0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000046 R13: 0000000000000000 R14: ffff8801e4471820 R15: 0000000000000005 FS: 00007f607411c6e0(0000) GS:ffff88002818b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 00000001da19a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cat (pid: 5937, threadinfo ffff8801cf4cc000, task ffff8801e4471820) Stack: ffff8800281989a0 ffff8802191e14b0 ffff88002819dd40 00007fff7c130640 0000000000000000 ffff88002819dd40 ffff8801cf4cdf70 ffffffff806f8264 0000000000000002 ffff8801cf4cdf48 ffff8801e4471820 ffff88022f232820 Call Trace: [<ffffffff806f8264>] schedule+0xd99/0x10f9 [<ffffffff806fb61b>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8020d56d>] retint_careful+0x12/0x2e Code: f2 83 3d 1b b0 9f 00 00 74 77 48 3b 1d a2 de f2 00 75 6e 48 8b 4d 00 48 8b 3d 8d de f2 00 45 89 e8 48 8b 01 48 8b 71 08 4c 89 e1 <48> 8b 50 08 e8 f7 9f ff ff 48 8b 3d 70 de f2 00 45 89 e8 48 89 RIP [<ffffffff802d2258>] probe_wakeup_sched_switch+0xd1/0x1ae RSP <ffff8801cf4cdea0> CR2: 0000000000000008 ---[ end trace ab11daa90bb147ba ]---
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.29
# Thu Mar 26 17:19:45 2009
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION="-test"
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=17CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=yCONFIG_RELAY=yCONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not setCONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
# CONFIG_INITRAMFS_COMPRESSION_LZMA is not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not setCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#CONFIG_PERF_COUNTERS=yCONFIG_EVENT_PROFILE=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_COMPAT_BRK=yCONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=y
# CONFIG_OPROFILE is not setCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not setCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not setCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y
# CONFIG_X86_X2APIC is not set
# CONFIG_SPARSE_IRQ is not set CONFIG_X86_MPPARSE=y CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_UV is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=yCONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=yCONFIG_X86_DS=yCONFIG_X86_PTRACE_BTS=yCONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=yCONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_STATS is not set CONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=yCONFIG_IOMMU_API=y
# CONFIG_MAXSMP is not set CONFIG_NR_CPUS=255CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=y CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set CONFIG_X86_MSR=yCONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=yCONFIG_NUMA=yCONFIG_K8_NUMA=yCONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=6 CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTREMOVE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 # CONFIG_X86_PAT is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000
# CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=yCONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x200000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=yCONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#CONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not setCONFIG_ACPI=yCONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not setCONFIG_ACPI_PROCFS_POWER=yCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_FAN=yCONFIG_ACPI_DOCK=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=yCONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not setCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_HOTPLUG_MEMORY=mCONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not setCONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not setCONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not setCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=yCONFIG_K8_NB=yCONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not setCONFIG_PCMCIA=yCONFIG_PCMCIA_LOAD_CIS=yCONFIG_PCMCIA_IOCTL=yCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=yCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not setCONFIG_PCCARD_NONSTATIC=yCONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=yCONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not setCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_NET=y
#
# Networking options
#CONFIG_COMPAT_NET_DEV_OPS=yCONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not setCONFIG_INET=yCONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not setCONFIG_IPV6=mCONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set CONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not setCONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not setCONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not setCONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not setCONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_HL is not set
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
# CONFIG_IP6_NF_MATCH_MH is not set
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_TARGET_LOG is not setCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=m
# CONFIG_IP6_NF_MANGLE is not set
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not setCONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not setCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not setCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not setCONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not setCONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not setCONFIG_BT=mCONFIG_BT_L2CAP=m
# CONFIG_BT_SCO is not setCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=y
# CONFIG_BT_BNEP is not setCONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not setCONFIG_FIB_RULES=yCONFIG_WIRELESS=y
# CONFIG_CFG80211 is not setCONFIG_WIRELESS_OLD_REGULATORY=yCONFIG_WIRELESS_EXT=yCONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
# CONFIG_MTD is not setCONFIG_PARPORT=mCONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not setCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not setCONFIG_HAVE_IDE=yCONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives #CONFIG_IDE_TIMINGS=yCONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not setCONFIG_IDE_GD=yCONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set CONFIG_IDE_TASK_IOCTL=yCONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not setCONFIG_BLK_DEV_IDEPNP=yCONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#CONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not setCONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=yCONFIG_BLK_DEV_AEC62XX=yCONFIG_BLK_DEV_ALI15X3=yCONFIG_BLK_DEV_AMD74XX=yCONFIG_BLK_DEV_ATIIXP=yCONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not setCONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not setCONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not setCONFIG_BLK_DEV_IT821X=y
# CONFIG_BLK_DEV_NS87415 is not setCONFIG_BLK_DEV_PDC202XX_OLD=yCONFIG_BLK_DEV_PDC202XX_NEW=yCONFIG_BLK_DEV_SVWKS=yCONFIG_BLK_DEV_SIIMAGE=yCONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not setCONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not setCONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=mCONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not setCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not setCONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not setCONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not setCONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not setCONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_ATA is not setCONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not setCONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not setCONFIG_DM_MIRROR=m
# CONFIG_DM_ZERO is not setCONFIG_DM_MULTIPATH=m
# CONFIG_DM_DELAY is not setCONFIG_DM_UEVENT=yCONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not setCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing #
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not setCONFIG_PHYLIB=m
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
# CONFIG_DNET is not set CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not setCONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not setCONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_WAN is not setCONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not setCONFIG_NET_FC=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not setCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not setCONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_DEVKMEM=yCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not setCONFIG_SERIAL_8250_NR_UARTS=32CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=yCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not setCONFIG_PRINTER=mCONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not setCONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not setCONFIG_NVRAM=yCONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not setCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=8192CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not setCONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not setCONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not setCONFIG_THERMAL=yCONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=yCONFIG_AGP_SIS=yCONFIG_AGP_VIA=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not setCONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not setCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not setCONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not setCONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set CONFIG_HID_SUPPORT=yCONFIG_HID=yCONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#CONFIG_USB_HID=yCONFIG_HID_PID=yCONFIG_USB_HIDDEV=y
#
# Special HID drivers
#CONFIG_HID_COMPAT=yCONFIG_HID_A4TECH=yCONFIG_HID_APPLE=yCONFIG_HID_BELKIN=yCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=yCONFIG_HID_CYPRESS=yCONFIG_HID_EZKEY=yCONFIG_HID_GYRATION=yCONFIG_HID_LOGITECH=yCONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not setCONFIG_HID_MICROSOFT=yCONFIG_HID_MONTEREY=yCONFIG_HID_NTRIG=yCONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not setCONFIG_HID_PETALYNX=yCONFIG_HID_SAMSUNG=yCONFIG_HID_SONY=yCONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not setCONFIG_HID_TOPSEED=yCONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not setCONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not setCONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; #
#
# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
#
# OTG and related infrastructure
#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not setCONFIG_LEDS_TRIGGER_IDE_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not setCONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not setCONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not setCONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not setCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=yCONFIG_EXT2_FS_XIP=yCONFIG_EXT3_FS=mCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not setCONFIG_FS_XIP=yCONFIG_JBD=m
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not setCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not setCONFIG_PRINT_QUOTA_WARNING=yCONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_VMCORE=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not setCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not setCONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not setCONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not setCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not setCONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not setCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_ALLOW_WARNINGS=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not setCONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not setCONFIG_DEBUG_MEMORY_INIT=yCONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not setCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not setCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE_NMI_ENTER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_HW_BRANCH_TRACER=yCONFIG_HAVE_FTRACE_SYSCALLS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_FTRACE_NMI_ENTER=yCONFIG_TRACING=yCONFIG_TRACING_SUPPORT=y
#
# Tracers
#CONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=yCONFIG_IRQSOFF_TRACER=yCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_EVENT_TRACER=yCONFIG_FTRACE_SYSCALLS=yCONFIG_BOOT_TRACER=yCONFIG_TRACE_BRANCH_PROFILING=yCONFIG_PROFILE_ALL_BRANCHES=yCONFIG_TRACING_BRANCHES=yCONFIG_BRANCH_TRACER=yCONFIG_POWER_TRACER=yCONFIG_STACK_TRACER=yCONFIG_HW_BRANCH_TRACER=yCONFIG_KMEMTRACE=yCONFIG_WORKQUEUE_TRACER=yCONFIG_BLK_DEV_IO_TRACE=yCONFIG_DYNAMIC_FTRACE=yCONFIG_FUNCTION_PROFILER=yCONFIG_FTRACE_MCOUNT_RECORD=yCONFIG_FTRACE_SELFTEST=yCONFIG_FTRACE_STARTUP_TEST=yCONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not setCONFIG_SAMPLES=y
# CONFIG_SAMPLE_MARKERS is not set
# CONFIG_SAMPLE_TRACEPOINTS is not set
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not setCONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not setCONFIG_X86_VERBOSE_BOOTUP=yCONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not setCONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not setCONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_SMACK is not set CONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not setCONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not setCONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not setCONFIG_HAVE_KVM=yCONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not setCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not setCONFIG_CRC32=y
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_DECOMPRESS_GZIP=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=y
Quoted 37 lines · Maneesh Soni
I hit the below oops while playing with "wakeup" tracer. Just enabled tracing and ran "while true; do cat trace; done" on a 8-way systems with -tip at commit
9e25bacc221318a29d37425e054c01047edad7f5.Attached the .config.
Thanks
ManeeshBUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff802d2258>] probe_wakeup_sched_switch+0xd1/0x1ae PGD 219147067 PUD 1e449e067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:0c/0000:0c:00.0/irq CPU 5 Modules linked in: autofs4 hidp rfcomm l2cap bluetooth iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport sg sr_mod ide_cd_mod cdrom serio_raw acpi_memhotplug button tg3 libphy i2c_piix4 i2c_core pcspkr usb_storage uhci_hcd ohci_hcd ehci_hcd aacraid sd_mod scsi_mod ext3 jbd Pid: 5937, comm: cat Not tainted 2.6.29-tip-test #1 eserver xSeries 366-[88632RA]- RIP: 0010:[<ffffffff802d2258>] [<ffffffff802d2258>] probe_wakeup_sched_switch+0xd1/0x1ae RSP: 0000:ffff8801cf4cdea0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88022f232820 RCX: 0000000000000046 RDX: ffff8800281989a0 RSI: ffffffff8020d56d RDI: ffffffff811de480 RBP: ffff8801cf4cded0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000046 R13: 0000000000000000 R14: ffff8801e4471820 R15: 0000000000000005 FS: 00007f607411c6e0(0000) GS:ffff88002818b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 00000001da19a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cat (pid: 5937, threadinfo ffff8801cf4cc000, task ffff8801e4471820) Stack: ffff8800281989a0 ffff8802191e14b0 ffff88002819dd40 00007fff7c130640 0000000000000000 ffff88002819dd40 ffff8801cf4cdf70 ffffffff806f8264 0000000000000002 ffff8801cf4cdf48 ffff8801e4471820 ffff88022f232820 Call Trace:
Quoted 9 lines
[<ffffffff806f8264>] schedule+0xd99/0x10f9 [<ffffffff806fb61b>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8020d56d>] retint_careful+0x12/0x2e Code: f2 83 3d 1b b0 9f 00 00 74 77 48 3b 1d a2 de f2 00 75 6e 48 8b 4d 00 48 8b 3d 8d de f2 00 45 89 e8 48 8b 01 48 8b 71 08 4c 89 e1 <48> 8b 50 08 e8 f7 9f ff ff 48 8b 3d 70 de f2 00 45 89 e8 48 89 RIP [<ffffffff802d2258>] probe_wakeup_sched_switch+0xd1/0x1ae RSP <ffff8801cf4cdea0> CR2: 0000000000000008 ---[ end trace ab11daa90bb147ba ]---
I've tested the same config and ran your script with wakeup tracer but nothing weird happened.
Though I've tested on UP so may be I should try on SMP.
Thanks,
Frederic.
Quoted 2,271 lines
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.29
# Thu Mar 26 17:19:45 2009
#CONFIG_64BIT=y
#CONFIG_X86_32is not setCONFIG_X86_64=yCONFIG_X86=yCONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=yCONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_GENERIC_HWEIGHT=yCONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_RWSEM_GENERIC_SPINLOCK=y
#CONFIG_RWSEM_XCHGADD_ALGORITHMis not setCONFIG_ARCH_HAS_CPU_IDLE_WAIT=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_DEFAULT_IDLE=yCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_HAVE_DYNAMIC_PER_CPU_AREA=yCONFIG_HAVE_CPUMASK_OF_CPU_MAP=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=yCONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_AUDIT_ARCH=yCONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_USE_GENERIC_SMP_HELPERS=yCONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=y
#CONFIG_KTIME_SCALARis not setCONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION="-test"
#CONFIG_LOCALVERSION_AUTOis not setCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_KERNEL_GZIP=y
#CONFIG_KERNEL_BZIP2is not set
#CONFIG_KERNEL_LZMAis not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=y
#CONFIG_BSD_PROCESS_ACCT_V3is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=y
#CONFIG_TASK_XACCTis not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=y#
# RCU Subsystem
#CONFIG_CLASSIC_RCU=y
#CONFIG_TREE_RCUis not set
#CONFIG_PREEMPT_RCUis not set
#CONFIG_TREE_RCU_TRACEis not set
#CONFIG_PREEMPT_RCU_TRACEis not set
#CONFIG_IKCONFIGis not setCONFIG_LOG_BUF_SHIFT=17CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#CONFIG_GROUP_SCHEDis not set
#CONFIG_CGROUPSis not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=yCONFIG_RELAY=yCONFIG_NAMESPACES=y
#CONFIG_UTS_NSis not set
#CONFIG_IPC_NSis not set
#CONFIG_USER_NSis not set
#CONFIG_PID_NSis not set
#CONFIG_NET_NSis not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=y
#CONFIG_RD_BZIP2is not set
#CONFIG_RD_LZMAis not setCONFIG_INITRAMFS_COMPRESSION_NONE=y
#CONFIG_INITRAMFS_COMPRESSION_GZIPis not set
#CONFIG_INITRAMFS_COMPRESSION_BZIP2is not set
#CONFIG_INITRAMFS_COMPRESSION_LZMAis not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=y
#CONFIG_EMBEDDEDis not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=y
#CONFIG_KALLSYMS_ALLis not setCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_COUNTERS=y#
# Performance Counters
#CONFIG_PERF_COUNTERS=yCONFIG_EVENT_PROFILE=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_COMPAT_BRK=yCONFIG_SLAB=y
#CONFIG_SLUBis not set
#CONFIG_SLOBis not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=y
#CONFIG_OPROFILEis not setCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_API_DEBUG=y
#CONFIG_HAVE_GENERIC_DMA_COHERENTis not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=y
#CONFIG_MODULE_FORCE_LOADis not setCONFIG_MODULE_UNLOAD=y
#CONFIG_MODULE_FORCE_UNLOADis not setCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=y
#CONFIG_BLK_DEV_BSGis not set
#CONFIG_BLK_DEV_INTEGRITYis not setCONFIG_BLOCK_COMPAT=y#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
#CONFIG_DEFAULT_ASis not set
#CONFIG_DEFAULT_DEADLINEis not setCONFIG_DEFAULT_CFQ=y
#CONFIG_DEFAULT_NOOPis not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_FREEZER=y#
# Processor type and features
#
#CONFIG_NO_HZis not set
#CONFIG_HIGH_RES_TIMERSis not setCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_SMP=y
#CONFIG_X86_X2APICis not set
#CONFIG_SPARSE_IRQis not setCONFIG_X86_MPPARSE=yCONFIG_X86_EXTENDED_PLATFORM=y
#CONFIG_X86_VSMPis not set
#CONFIG_X86_UVis not setCONFIG_SCHED_OMIT_FRAME_POINTER=y
#CONFIG_PARAVIRT_GUESTis not set
#CONFIG_MEMTESTis not set
#CONFIG_M386is not set
#CONFIG_M486is not set
#CONFIG_M586is not set
#CONFIG_M586TSCis not set
#CONFIG_M586MMXis not set
#CONFIG_M686is not set
#CONFIG_MPENTIUMIIis not set
#CONFIG_MPENTIUMIIIis not set
#CONFIG_MPENTIUMMis not set
#CONFIG_MPENTIUM4is not set
#CONFIG_MK6is not set
#CONFIG_MK7is not set
#CONFIG_MK8is not set
#CONFIG_MCRUSOEis not set
#CONFIG_MEFFICEONis not set
#CONFIG_MWINCHIPC6is not set
#CONFIG_MWINCHIP3Dis not set
#CONFIG_MGEODEGX1is not set
#CONFIG_MGEODE_LXis not set
#CONFIG_MCYRIXIIIis not set
#CONFIG_MVIAC3_2is not set
#CONFIG_MVIAC7is not set
#CONFIG_MPSCis not set
#CONFIG_MCORE2is not setCONFIG_GENERIC_CPU=yCONFIG_X86_CPU=yCONFIG_X86_L1_CACHE_BYTES=64CONFIG_X86_INTERNODE_CACHE_BYTES=64CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=yCONFIG_X86_DS=yCONFIG_X86_PTRACE_BTS=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=yCONFIG_CALGARY_IOMMU=y
#CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULTis not setCONFIG_AMD_IOMMU=y
#CONFIG_AMD_IOMMU_STATSis not setCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=yCONFIG_IOMMU_API=y
#CONFIG_MAXSMPis not setCONFIG_NR_CPUS=255CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=y
#CONFIG_PREEMPT_NONEis not setCONFIG_PREEMPT_VOLUNTARY=y
#CONFIG_PREEMPTis not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
#CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQSis not setCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=y
#CONFIG_I8Kis not set
#CONFIG_MICROCODEis not setCONFIG_X86_MSR=yCONFIG_X86_CPUID=y
#CONFIG_X86_CPU_DEBUGis not setCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_DIRECT_GBPAGES=yCONFIG_NUMA=yCONFIG_K8_NUMA=yCONFIG_X86_64_ACPI_NUMA=yCONFIG_NODES_SPAN_OTHER_NODES=y
#CONFIG_NUMA_EMUis not setCONFIG_NODES_SHIFT=6CONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_MEMORY_PROBE=yCONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000CONFIG_SELECT_MEMORY_MODEL=y
#CONFIG_FLATMEM_MANUALis not set
#CONFIG_DISCONTIGMEM_MANUALis not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=yCONFIG_MEMORY_HOTPLUG=yCONFIG_MEMORY_HOTPLUG_SPARSE=y
#CONFIG_MEMORY_HOTREMOVEis not setCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MIGRATION=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_UNEVICTABLE_LRU=y
#CONFIG_X86_CHECK_BIOS_CORRUPTIONis not setCONFIG_X86_RESERVE_LOW_64K=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=yCONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1#CONFIG_X86_PATis not set
#CONFIG_EFIis not set
#CONFIG_SECCOMPis not set
#CONFIG_CC_STACKPROTECTORis not set
#CONFIG_HZ_100is not set
#CONFIG_HZ_250is not set
#CONFIG_HZ_300is not setCONFIG_HZ_1000=yCONFIG_HZ=1000
#CONFIG_SCHED_HRTICKis not setCONFIG_KEXEC=yCONFIG_CRASH_DUMP=yCONFIG_PHYSICAL_START=0x200000CONFIG_RELOCATABLE=yCONFIG_PHYSICAL_ALIGN=0x200000CONFIG_HOTPLUG_CPU=yCONFIG_COMPAT_VDSO=y
#CONFIG_CMDLINE_BOOLis not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=yCONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y#
# Power management and ACPI options
#CONFIG_PM=y
#CONFIG_PM_DEBUGis not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=y
#CONFIG_HIBERNATIONis not setCONFIG_ACPI=yCONFIG_ACPI_SLEEP=y
#CONFIG_ACPI_PROCFSis not setCONFIG_ACPI_PROCFS_POWER=yCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_FAN=yCONFIG_ACPI_DOCK=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=yCONFIG_ACPI_NUMA=y
#CONFIG_ACPI_CUSTOM_DSDTis not setCONFIG_ACPI_BLACKLIST_YEAR=0
#CONFIG_ACPI_DEBUGis not set
#CONFIG_ACPI_PCI_SLOTis not setCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_HOTPLUG_MEMORY=mCONFIG_ACPI_SBS=m#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_DEBUG=y
#CONFIG_CPU_FREQ_STATis not set
#CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCEis not set #CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVEis not setCONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
#CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMANDis not set #CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVEis not setCONFIG_CPU_FREQ_GOV_PERFORMANCE=y
#CONFIG_CPU_FREQ_GOV_POWERSAVEis not setCONFIG_CPU_FREQ_GOV_USERSPACE=y
#CONFIG_CPU_FREQ_GOV_ONDEMANDis not set
#CONFIG_CPU_FREQ_GOV_CONSERVATIVEis not set#
# CPUFreq processor drivers
#
#CONFIG_X86_ACPI_CPUFREQis not set
#CONFIG_X86_POWERNOW_K8is not set
#CONFIG_X86_SPEEDSTEP_CENTRINOis not set
#CONFIG_X86_P4_CLOCKMODis not set#
# shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y#
# Memory power savings
#
#CONFIG_I7300_IDLEis not set#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=y
#CONFIG_DMARis not set
#CONFIG_INTR_REMAPis not setCONFIG_PCIEPORTBUS=y
#CONFIG_HOTPLUG_PCI_PCIEis not setCONFIG_PCIEAER=y
#CONFIG_PCIEASPMis not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=y
#CONFIG_PCI_DEBUGis not set
#CONFIG_PCI_STUBis not setCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=yCONFIG_K8_NB=yCONFIG_PCCARD=y
#CONFIG_PCMCIA_DEBUGis not setCONFIG_PCMCIA=yCONFIG_PCMCIA_LOAD_CIS=yCONFIG_PCMCIA_IOCTL=yCONFIG_CARDBUS=y#
# PC-card bridges
#CONFIG_YENTA=yCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=y
#CONFIG_PD6729is not set
#CONFIG_I82092is not setCONFIG_PCCARD_NONSTATIC=yCONFIG_HOTPLUG_PCI=y
#CONFIG_HOTPLUG_PCI_FAKEis not set
#CONFIG_HOTPLUG_PCI_ACPIis not set
#CONFIG_HOTPLUG_PCI_CPCIis not set
#CONFIG_HOTPLUG_PCI_SHPCis not set#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=y
#CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERSis not set
#CONFIG_HAVE_AOUTis not setCONFIG_BINFMT_MISC=yCONFIG_IA32_EMULATION=y
#CONFIG_IA32_AOUTis not setCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_NET=y#
# Networking options
#CONFIG_COMPAT_NET_DEV_OPS=yCONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=y
#CONFIG_XFRM_SUB_POLICYis not set
#CONFIG_XFRM_MIGRATEis not set
#CONFIG_XFRM_STATISTICSis not set
#CONFIG_NET_KEYis not setCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
#CONFIG_IP_FIB_TRIEis not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=y
#CONFIG_IP_PNPis not set
#CONFIG_NET_IPIPis not set
#CONFIG_NET_IPGREis not setCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
#CONFIG_ARPDis not setCONFIG_SYN_COOKIES=y
#CONFIG_INET_AHis not set
#CONFIG_INET_ESPis not set
#CONFIG_INET_IPCOMPis not set
#CONFIG_INET_XFRM_TUNNELis not set
#CONFIG_INET_TUNNELis not set
#CONFIG_INET_XFRM_MODE_TRANSPORTis not set #CONFIG_INET_XFRM_MODE_TUNNELis not setCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=y
#CONFIG_INET_DIAGis not setCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=y
#CONFIG_TCP_CONG_CUBICis not set
#CONFIG_TCP_CONG_WESTWOODis not set
#CONFIG_TCP_CONG_HTCPis not set
#CONFIG_TCP_CONG_HSTCPis not set
#CONFIG_TCP_CONG_HYBLAis not set
#CONFIG_TCP_CONG_VEGASis not set
#CONFIG_TCP_CONG_SCALABLEis not set
#CONFIG_TCP_CONG_LPis not set
#CONFIG_TCP_CONG_VENOis not set
#CONFIG_TCP_CONG_YEAHis not set
#CONFIG_TCP_CONG_ILLINOISis not setCONFIG_DEFAULT_BIC=y
#CONFIG_DEFAULT_CUBICis not set
#CONFIG_DEFAULT_HTCPis not set
#CONFIG_DEFAULT_VEGASis not set
#CONFIG_DEFAULT_WESTWOODis not set
#CONFIG_DEFAULT_RENOis not setCONFIG_DEFAULT_TCP_CONG="bic"
#CONFIG_TCP_MD5SIGis not setCONFIG_IPV6=mCONFIG_IPV6_PRIVACY=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=yCONFIG_IPV6_OPTIMISTIC_DAD=y
#CONFIG_INET6_AHis not set
#CONFIG_INET6_ESPis not set
#CONFIG_INET6_IPCOMPis not set
#CONFIG_IPV6_MIP6is not set
#CONFIG_INET6_XFRM_TUNNELis not set
#CONFIG_INET6_TUNNELis not set
#CONFIG_INET6_XFRM_MODE_TRANSPORTis not set #CONFIG_INET6_XFRM_MODE_TUNNELis not set
#CONFIG_INET6_XFRM_MODE_BEETis not set
#CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATIONis not set #CONFIG_IPV6_SITis not set
#CONFIG_IPV6_TUNNELis not setCONFIG_IPV6_MULTIPLE_TABLES=y
#CONFIG_IPV6_SUBTREESis not set
#CONFIG_IPV6_MROUTEis not setCONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
#CONFIG_NETFILTER_DEBUGis not setCONFIG_NETFILTER_ADVANCED=y#
# Core Netfilter Configuration
#
#CONFIG_NETFILTER_NETLINK_QUEUEis not set
#CONFIG_NETFILTER_NETLINK_LOGis not set
#CONFIG_NF_CONNTRACKis not setCONFIG_NETFILTER_XTABLES=m
#CONFIG_NETFILTER_XT_TARGET_CLASSIFYis not set
#CONFIG_NETFILTER_XT_TARGET_MARKis not set
#CONFIG_NETFILTER_XT_TARGET_NFLOGis not set
#CONFIG_NETFILTER_XT_TARGET_NFQUEUEis not set
#CONFIG_NETFILTER_XT_TARGET_RATEESTis not set
#CONFIG_NETFILTER_XT_TARGET_SECMARKis not set
#CONFIG_NETFILTER_XT_TARGET_TCPMSSis not set
#CONFIG_NETFILTER_XT_MATCH_COMMENTis not set
#CONFIG_NETFILTER_XT_MATCH_DCCPis not set
#CONFIG_NETFILTER_XT_MATCH_DSCPis not set
#CONFIG_NETFILTER_XT_MATCH_ESPis not set
#CONFIG_NETFILTER_XT_MATCH_HASHLIMITis not set
#CONFIG_NETFILTER_XT_MATCH_IPRANGEis not set
#CONFIG_NETFILTER_XT_MATCH_LENGTHis not set
#CONFIG_NETFILTER_XT_MATCH_LIMITis not set
#CONFIG_NETFILTER_XT_MATCH_MACis not set
#CONFIG_NETFILTER_XT_MATCH_MARKis not set
#CONFIG_NETFILTER_XT_MATCH_MULTIPORTis not set
#CONFIG_NETFILTER_XT_MATCH_OWNERis not set
#CONFIG_NETFILTER_XT_MATCH_POLICYis not set
#CONFIG_NETFILTER_XT_MATCH_PKTTYPEis not set
#CONFIG_NETFILTER_XT_MATCH_QUOTAis not set
#CONFIG_NETFILTER_XT_MATCH_RATEESTis not set
#CONFIG_NETFILTER_XT_MATCH_REALMis not set
#CONFIG_NETFILTER_XT_MATCH_RECENTis not set
#CONFIG_NETFILTER_XT_MATCH_SCTPis not set
#CONFIG_NETFILTER_XT_MATCH_STATISTICis not set
#CONFIG_NETFILTER_XT_MATCH_STRINGis not set
#CONFIG_NETFILTER_XT_MATCH_TCPMSSis not set
#CONFIG_NETFILTER_XT_MATCH_TIMEis not set
#CONFIG_NETFILTER_XT_MATCH_U32is not set
#CONFIG_IP_VSis not set#
# IP: Netfilter Configuration
#
#CONFIG_NF_DEFRAG_IPV4is not set
#CONFIG_IP_NF_QUEUEis not setCONFIG_IP_NF_IPTABLES=m
#CONFIG_IP_NF_MATCH_ADDRTYPEis not set
#CONFIG_IP_NF_MATCH_AHis not set
#CONFIG_IP_NF_MATCH_ECNis not set
#CONFIG_IP_NF_MATCH_TTLis not setCONFIG_IP_NF_FILTER=m
#CONFIG_IP_NF_TARGET_REJECTis not set
#CONFIG_IP_NF_TARGET_LOGis not set
#CONFIG_IP_NF_TARGET_ULOGis not set
#CONFIG_IP_NF_MANGLEis not set
#CONFIG_IP_NF_RAWis not set
#CONFIG_IP_NF_SECURITYis not set
#CONFIG_IP_NF_ARPTABLESis not set#
# IPv6: Netfilter Configuration
#
#CONFIG_IP6_NF_QUEUEis not setCONFIG_IP6_NF_IPTABLES=m
#CONFIG_IP6_NF_MATCH_AHis not set
#CONFIG_IP6_NF_MATCH_EUI64is not set
#CONFIG_IP6_NF_MATCH_FRAGis not set
#CONFIG_IP6_NF_MATCH_OPTSis not set
#CONFIG_IP6_NF_MATCH_HLis not set
#CONFIG_IP6_NF_MATCH_IPV6HEADERis not set
#CONFIG_IP6_NF_MATCH_MHis not set
#CONFIG_IP6_NF_MATCH_RTis not set
#CONFIG_IP6_NF_TARGET_LOGis not setCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=m
#CONFIG_IP6_NF_MANGLEis not set
#CONFIG_IP6_NF_RAWis not set
#CONFIG_IP6_NF_SECURITYis not set
#CONFIG_IP_DCCPis not set
#CONFIG_IP_SCTPis not set
#CONFIG_TIPCis not set
#CONFIG_ATMis not set
#CONFIG_BRIDGEis not set
#CONFIG_NET_DSAis not set
#CONFIG_VLAN_8021Qis not set
#CONFIG_DECNETis not setCONFIG_LLC=y
#CONFIG_LLC2is not set
#CONFIG_IPXis not set
#CONFIG_ATALKis not set
#CONFIG_X25is not set
#CONFIG_LAPBis not set
#CONFIG_ECONETis not set
#CONFIG_WAN_ROUTERis not setCONFIG_NET_SCHED=y#
# Queueing/Scheduling
#
#CONFIG_NET_SCH_CBQis not set
#CONFIG_NET_SCH_HTBis not set
#CONFIG_NET_SCH_HFSCis not set
#CONFIG_NET_SCH_PRIOis not set
#CONFIG_NET_SCH_MULTIQis not set
#CONFIG_NET_SCH_REDis not set
#CONFIG_NET_SCH_SFQis not set
#CONFIG_NET_SCH_TEQLis not set
#CONFIG_NET_SCH_TBFis not set
#CONFIG_NET_SCH_GREDis not set
#CONFIG_NET_SCH_DSMARKis not set
#CONFIG_NET_SCH_NETEMis not set
#CONFIG_NET_SCH_DRRis not set
#CONFIG_NET_SCH_INGRESSis not set#
# Classification
#CONFIG_NET_CLS=y
#CONFIG_NET_CLS_BASICis not set
#CONFIG_NET_CLS_TCINDEXis not set
#CONFIG_NET_CLS_ROUTE4is not set
#CONFIG_NET_CLS_FWis not set
#CONFIG_NET_CLS_U32is not set
#CONFIG_NET_CLS_RSVPis not set
#CONFIG_NET_CLS_RSVP6is not set
#CONFIG_NET_CLS_FLOWis not setCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32
#CONFIG_NET_EMATCH_CMPis not set
#CONFIG_NET_EMATCH_NBYTEis not set
#CONFIG_NET_EMATCH_U32is not set
#CONFIG_NET_EMATCH_METAis not set
#CONFIG_NET_EMATCH_TEXTis not setCONFIG_NET_CLS_ACT=y
#CONFIG_NET_ACT_POLICEis not set
#CONFIG_NET_ACT_GACTis not set
#CONFIG_NET_ACT_MIRREDis not set
#CONFIG_NET_ACT_IPTis not set
#CONFIG_NET_ACT_NATis not set
#CONFIG_NET_ACT_PEDITis not set
#CONFIG_NET_ACT_SIMPis not set
#CONFIG_NET_ACT_SKBEDITis not setCONFIG_NET_SCH_FIFO=y
#CONFIG_DCBis not set#
# Network testing
#
#CONFIG_NET_PKTGENis not set
#CONFIG_NET_TCPPROBEis not set
#CONFIG_HAMRADIOis not set
#CONFIG_CANis not set
#CONFIG_IRDAis not setCONFIG_BT=mCONFIG_BT_L2CAP=m
#CONFIG_BT_SCOis not setCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=y
#CONFIG_BT_BNEPis not setCONFIG_BT_HIDP=m#
# Bluetooth device drivers
#
#CONFIG_BT_HCIBTUSBis not set
#CONFIG_BT_HCIUARTis not set
#CONFIG_BT_HCIBCM203Xis not set
#CONFIG_BT_HCIBPA10Xis not set
#CONFIG_BT_HCIBFUSBis not set
#CONFIG_BT_HCIDTL1is not set
#CONFIG_BT_HCIBT3Cis not set
#CONFIG_BT_HCIBLUECARDis not set
#CONFIG_BT_HCIBTUARTis not set
#CONFIG_BT_HCIVHCIis not set
#CONFIG_AF_RXRPCis not set
#CONFIG_PHONETis not setCONFIG_FIB_RULES=yCONFIG_WIRELESS=y
#CONFIG_CFG80211is not setCONFIG_WIRELESS_OLD_REGULATORY=yCONFIG_WIRELESS_EXT=yCONFIG_WIRELESS_EXT_SYSFS=y
#CONFIG_LIB80211is not set
#CONFIG_MAC80211is not set
#CONFIG_WIMAXis not set
#CONFIG_RFKILLis not set#
# Device Drivers
##
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
#CONFIG_DEBUG_DRIVERis not set
#CONFIG_DEBUG_DEVRESis not set
#CONFIG_SYS_HYPERVISORis not setCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
#CONFIG_MTDis not setCONFIG_PARPORT=mCONFIG_PARPORT_PC=m
#CONFIG_PARPORT_SERIALis not set
#CONFIG_PARPORT_PC_FIFOis not set
#CONFIG_PARPORT_PC_SUPERIOis not set
#CONFIG_PARPORT_PC_PCMCIAis not set
#CONFIG_PARPORT_GSCis not set
#CONFIG_PARPORT_AX88796is not setCONFIG_PARPORT_1284=yCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=y
#CONFIG_BLK_DEV_FDis not set
#CONFIG_PARIDEis not set
#CONFIG_BLK_CPQ_DAis not set
#CONFIG_BLK_CPQ_CISS_DAis not set
#CONFIG_BLK_DEV_DAC960is not set
#CONFIG_BLK_DEV_UMEMis not set
#CONFIG_BLK_DEV_COW_COMMONis not set
#CONFIG_BLK_DEV_LOOPis not set
#CONFIG_BLK_DEV_NBDis not set
#CONFIG_BLK_DEV_SX8is not set
#CONFIG_BLK_DEV_UBis not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384
#CONFIG_BLK_DEV_XIPis not set
#CONFIG_CDROM_PKTCDVDis not set
#CONFIG_ATA_OVER_ETHis not set
#CONFIG_BLK_DEV_HDis not setCONFIG_MISC_DEVICES=y
#CONFIG_IBM_ASMis not set
#CONFIG_PHANTOMis not set
#CONFIG_SGI_IOC4is not set
#CONFIG_TIFM_COREis not set
#CONFIG_ICS932S401is not set
#CONFIG_ENCLOSURE_SERVICESis not set
#CONFIG_HP_ILOis not set
#CONFIG_C2PORTis not set#
# EEPROM support
#
#CONFIG_EEPROM_AT24is not set
#CONFIG_EEPROM_LEGACYis not set
#CONFIG_EEPROM_93CX6is not setCONFIG_HAVE_IDE=yCONFIG_IDE=y#
# Please seeDocumentation/ide/ide.txtfor help/info on IDE drives #CONFIG_IDE_TIMINGS=yCONFIG_IDE_ATAPI=y
#CONFIG_BLK_DEV_IDE_SATAis not setCONFIG_IDE_GD=yCONFIG_IDE_GD_ATA=y
#CONFIG_IDE_GD_ATAPIis not set
#CONFIG_BLK_DEV_IDECSis not set
#CONFIG_BLK_DEV_DELKINis not setCONFIG_BLK_DEV_IDECD=mCONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
#CONFIG_BLK_DEV_IDETAPEis not set
#CONFIG_BLK_DEV_IDEACPIis not setCONFIG_IDE_TASK_IOCTL=yCONFIG_IDE_PROC_FS=y#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=y
#CONFIG_BLK_DEV_PLATFORMis not set
#CONFIG_BLK_DEV_CMD640is not setCONFIG_BLK_DEV_IDEPNP=yCONFIG_BLK_DEV_IDEDMA_SFF=y#
# PCI IDE chipsets support
#CONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_PCIBUS_ORDER=y
#CONFIG_BLK_DEV_OFFBOARDis not setCONFIG_BLK_DEV_GENERIC=y
#CONFIG_BLK_DEV_OPTI621is not set
#CONFIG_BLK_DEV_RZ1000is not setCONFIG_BLK_DEV_IDEDMA_PCI=yCONFIG_BLK_DEV_AEC62XX=yCONFIG_BLK_DEV_ALI15X3=yCONFIG_BLK_DEV_AMD74XX=yCONFIG_BLK_DEV_ATIIXP=yCONFIG_BLK_DEV_CMD64X=y
#CONFIG_BLK_DEV_TRIFLEXis not set
#CONFIG_BLK_DEV_CS5520is not set
#CONFIG_BLK_DEV_CS5530is not setCONFIG_BLK_DEV_HPT366=y
#CONFIG_BLK_DEV_JMICRONis not set
#CONFIG_BLK_DEV_SC1200is not setCONFIG_BLK_DEV_PIIX=y
#CONFIG_BLK_DEV_IT8172is not set
#CONFIG_BLK_DEV_IT8213is not setCONFIG_BLK_DEV_IT821X=y
#CONFIG_BLK_DEV_NS87415is not setCONFIG_BLK_DEV_PDC202XX_OLD=yCONFIG_BLK_DEV_PDC202XX_NEW=yCONFIG_BLK_DEV_SVWKS=yCONFIG_BLK_DEV_SIIMAGE=yCONFIG_BLK_DEV_SIS5513=y
#CONFIG_BLK_DEV_SLC90E66is not set
#CONFIG_BLK_DEV_TRM290is not setCONFIG_BLK_DEV_VIA82CXXX=y
#CONFIG_BLK_DEV_TC86C001is not setCONFIG_BLK_DEV_IDEDMA=y#
# SCSI device support
#
#CONFIG_RAID_ATTRSis not setCONFIG_SCSI=mCONFIG_SCSI_DMA=y
#CONFIG_SCSI_TGTis not set
#CONFIG_SCSI_NETLINKis not setCONFIG_SCSI_PROC_FS=y#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=m
#CONFIG_CHR_DEV_STis not set
#CONFIG_CHR_DEV_OSSTis not setCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=m
#CONFIG_CHR_DEV_SCHis not set#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
#CONFIG_SCSI_SCAN_ASYNCis not setCONFIG_SCSI_WAIT_SCAN=m#
# SCSI Transports
#
#CONFIG_SCSI_SPI_ATTRSis not set
#CONFIG_SCSI_FC_ATTRSis not set
#CONFIG_SCSI_ISCSI_ATTRSis not set
#CONFIG_SCSI_SAS_LIBSASis not set
#CONFIG_SCSI_SRP_ATTRSis not setCONFIG_SCSI_LOWLEVEL=y
#CONFIG_ISCSI_TCPis not set
#CONFIG_SCSI_CXGB3_ISCSIis not set
#CONFIG_BLK_DEV_3W_XXXX_RAIDis not set
#CONFIG_SCSI_3W_9XXXis not set
#CONFIG_SCSI_ACARDis not setCONFIG_SCSI_AACRAID=m
#CONFIG_SCSI_AIC7XXXis not set
#CONFIG_SCSI_AIC7XXX_OLDis not set
#CONFIG_SCSI_AIC79XXis not set
#CONFIG_SCSI_AIC94XXis not set
#CONFIG_SCSI_DPT_I2Ois not set
#CONFIG_SCSI_ADVANSYSis not set
#CONFIG_SCSI_ARCMSRis not setCONFIG_MEGARAID_NEWGEN=y
#CONFIG_MEGARAID_MMis not set
#CONFIG_MEGARAID_LEGACYis not set
#CONFIG_MEGARAID_SASis not set
#CONFIG_SCSI_HPTIOPis not set
#CONFIG_SCSI_BUSLOGICis not set
#CONFIG_LIBFCis not set
#CONFIG_FCOEis not set
#CONFIG_SCSI_DMX3191Dis not set
#CONFIG_SCSI_EATAis not set
#CONFIG_SCSI_FUTURE_DOMAINis not set
#CONFIG_SCSI_GDTHis not set
#CONFIG_SCSI_IPSis not set
#CONFIG_SCSI_INITIOis not set
#CONFIG_SCSI_INIA100is not set
#CONFIG_SCSI_PPAis not set
#CONFIG_SCSI_IMMis not set
#CONFIG_SCSI_MVSASis not set
#CONFIG_SCSI_STEXis not set
#CONFIG_SCSI_SYM53C8XX_2is not set
#CONFIG_SCSI_QLOGIC_1280is not set
#CONFIG_SCSI_QLA_FCis not set
#CONFIG_SCSI_QLA_ISCSIis not set
#CONFIG_SCSI_LPFCis not set
#CONFIG_SCSI_DC395xis not set
#CONFIG_SCSI_DC390Tis not set
#CONFIG_SCSI_DEBUGis not set
#CONFIG_SCSI_SRPis not set
#CONFIG_SCSI_LOWLEVEL_PCMCIAis not setCONFIG_SCSI_DH=m
#CONFIG_SCSI_DH_RDACis not set
#CONFIG_SCSI_DH_HP_SWis not set
#CONFIG_SCSI_DH_EMCis not set
#CONFIG_SCSI_DH_ALUAis not set
#CONFIG_ATAis not setCONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=y
#CONFIG_MD_LINEARis not set
#CONFIG_MD_RAID0is not set
#CONFIG_MD_RAID1is not set
#CONFIG_MD_RAID10is not set
#CONFIG_MD_RAID456is not set
#CONFIG_MD_MULTIPATHis not set
#CONFIG_MD_FAULTYis not setCONFIG_BLK_DEV_DM=m
#CONFIG_DM_DEBUGis not set
#CONFIG_DM_CRYPTis not set
#CONFIG_DM_SNAPSHOTis not setCONFIG_DM_MIRROR=m
#CONFIG_DM_ZEROis not setCONFIG_DM_MULTIPATH=m
#CONFIG_DM_DELAYis not setCONFIG_DM_UEVENT=yCONFIG_FUSION=y
#CONFIG_FUSION_SPIis not set
#CONFIG_FUSION_FCis not set
#CONFIG_FUSION_SASis not setCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_LOGGING=y#
# IEEE 1394 (FireWire) support
##
# Enable only one of the two stacks, unless you know what you are doing #
#CONFIG_FIREWIREis not set
#CONFIG_IEEE1394is not set
#CONFIG_I2Ois not set
#CONFIG_MACINTOSH_DRIVERSis not setCONFIG_NETDEVICES=y
#CONFIG_IFBis not set
#CONFIG_DUMMYis not set
#CONFIG_BONDINGis not set
#CONFIG_MACVLANis not set
#CONFIG_EQUALIZERis not set
#CONFIG_TUNis not set
#CONFIG_VETHis not set
#CONFIG_NET_SB1000is not set
#CONFIG_ARCNETis not setCONFIG_PHYLIB=m#
# MII PHY device drivers
#
#CONFIG_MARVELL_PHYis not set
#CONFIG_DAVICOM_PHYis not set
#CONFIG_QSEMI_PHYis not set
#CONFIG_LXT_PHYis not set
#CONFIG_CICADA_PHYis not set
#CONFIG_VITESSE_PHYis not set
#CONFIG_SMSC_PHYis not set
#CONFIG_BROADCOM_PHYis not set
#CONFIG_ICPLUS_PHYis not set
#CONFIG_REALTEK_PHYis not set
#CONFIG_NATIONAL_PHYis not set
#CONFIG_STE10XPis not set
#CONFIG_LSI_ET1011C_PHYis not set
#CONFIG_MDIO_BITBANGis not setCONFIG_NET_ETHERNET=y
#CONFIG_MIIis not set
#CONFIG_HAPPYMEALis not set
#CONFIG_SUNGEMis not set
#CONFIG_CASSINIis not setCONFIG_NET_VENDOR_3COM=y
#CONFIG_VORTEXis not set
#CONFIG_TYPHOONis not set
#CONFIG_DNETis not setCONFIG_NET_TULIP=y
#CONFIG_DE2104Xis not set
#CONFIG_TULIPis not set
#CONFIG_DE4X5is not set
#CONFIG_WINBOND_840is not set
#CONFIG_DM9102is not set
#CONFIG_ULI526Xis not set
#CONFIG_PCMCIA_XIRCOMis not set
#CONFIG_HP100is not set
#CONFIG_IBM_NEW_EMAC_ZMIIis not set
#CONFIG_IBM_NEW_EMAC_RGMIIis not set
#CONFIG_IBM_NEW_EMAC_TAHis not set
#CONFIG_IBM_NEW_EMAC_EMAC4is not set
#CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRLis not set #CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTATis not set #CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERRis not setCONFIG_NET_PCI=y
#CONFIG_PCNET32is not set
#CONFIG_AMD8111_ETHis not set
#CONFIG_ADAPTEC_STARFIREis not set
#CONFIG_B44is not set
#CONFIG_FORCEDETHis not set
#CONFIG_E100is not set
#CONFIG_FEALNXis not set
#CONFIG_NATSEMIis not set
#CONFIG_NE2K_PCIis not set
#CONFIG_8139CPis not set
#CONFIG_8139TOOis not set
#CONFIG_R6040is not set
#CONFIG_SIS900is not set
#CONFIG_EPIC100is not set
#CONFIG_SMSC9420is not set
#CONFIG_SUNDANCEis not set
#CONFIG_TLANis not set
#CONFIG_VIA_RHINEis not set
#CONFIG_SC92031is not setCONFIG_NET_POCKET=y
#CONFIG_ATPis not set
#CONFIG_DE600is not set
#CONFIG_DE620is not set
#CONFIG_ATL2is not setCONFIG_NETDEV_1000=y
#CONFIG_ACENICis not set
#CONFIG_DL2Kis not set
#CONFIG_E1000is not set
#CONFIG_E1000Eis not set
#CONFIG_IP1000is not set
#CONFIG_IGBis not set
#CONFIG_NS83820is not set
#CONFIG_HAMACHIis not set
#CONFIG_YELLOWFINis not set
#CONFIG_R8169is not set
#CONFIG_SIS190is not set
#CONFIG_SKGEis not set
#CONFIG_SKY2is not set
#CONFIG_VIA_VELOCITYis not setCONFIG_TIGON3=m
#CONFIG_BNX2is not set
#CONFIG_QLA3XXXis not set
#CONFIG_ATL1is not set
#CONFIG_ATL1Eis not set
#CONFIG_ATL1Cis not set
#CONFIG_JMEis not setCONFIG_NETDEV_10000=y
#CONFIG_CHELSIO_T1is not setCONFIG_CHELSIO_T3_DEPENDS=y
#CONFIG_CHELSIO_T3is not set
#CONFIG_ENICis not set
#CONFIG_IXGBEis not set
#CONFIG_IXGBis not set
#CONFIG_S2IOis not set
#CONFIG_MYRI10GEis not set
#CONFIG_NIUis not set
#CONFIG_MLX4_ENis not set
#CONFIG_MLX4_COREis not set
#CONFIG_TEHUTIis not set
#CONFIG_BNX2Xis not set
#CONFIG_QLGEis not set
#CONFIG_SFCis not set
#CONFIG_BE2NETis not setCONFIG_TR=y
#CONFIG_IBMOLis not set
#CONFIG_3C359is not set
#CONFIG_TMS380TRis not set#
# Wireless LAN
#
#CONFIG_WLAN_PRE80211is not set
#CONFIG_WLAN_80211is not set
#CONFIG_IWLWIFI_LEDSis not set#
# Enable WiMAX (Networking options) to see the WiMAX drivers ##
# USB Network Adapters
#
#CONFIG_USB_CATCis not set
#CONFIG_USB_KAWETHis not set
#CONFIG_USB_PEGASUSis not set
#CONFIG_USB_RTL8150is not set
#CONFIG_USB_USBNETis not setCONFIG_NET_PCMCIA=y
#CONFIG_PCMCIA_3C589is not set
#CONFIG_PCMCIA_3C574is not set
#CONFIG_PCMCIA_FMVJ18Xis not set
#CONFIG_PCMCIA_PCNETis not set
#CONFIG_PCMCIA_NMCLANis not set
#CONFIG_PCMCIA_SMC91C92is not set
#CONFIG_PCMCIA_XIRC2PSis not set
#CONFIG_PCMCIA_AXNETis not set
#CONFIG_PCMCIA_IBMTRis not set
#CONFIG_WANis not setCONFIG_FDDI=y
#CONFIG_DEFXXis not set
#CONFIG_SKFPis not set
#CONFIG_HIPPIis not set
#CONFIG_PLIPis not set
#CONFIG_PPPis not set
#CONFIG_SLIPis not setCONFIG_NET_FC=y
#CONFIG_NETCONSOLEis not set
#CONFIG_NETPOLLis not set
#CONFIG_NET_POLL_CONTROLLERis not set
#CONFIG_ISDNis not set
#CONFIG_PHONEis not set#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=y
#CONFIG_INPUT_POLLDEVis not set#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
#CONFIG_INPUT_MOUSEDEV_PSAUXis not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#CONFIG_INPUT_JOYDEVis not setCONFIG_INPUT_EVDEV=y
#CONFIG_INPUT_EVBUGis not set#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
#CONFIG_KEYBOARD_SUNKBDis not set
#CONFIG_KEYBOARD_LKKBDis not set
#CONFIG_KEYBOARD_XTKBDis not set
#CONFIG_KEYBOARD_NEWTONis not set
#CONFIG_KEYBOARD_STOWAWAYis not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
#CONFIG_MOUSE_PS2_ELANTECHis not set
#CONFIG_MOUSE_PS2_TOUCHKITis not set
#CONFIG_MOUSE_SERIALis not set
#CONFIG_MOUSE_APPLETOUCHis not set
#CONFIG_MOUSE_BCM5974is not set
#CONFIG_MOUSE_VSXXXAAis not setCONFIG_INPUT_JOYSTICK=y
#CONFIG_JOYSTICK_ANALOGis not set
#CONFIG_JOYSTICK_A3Dis not set
#CONFIG_JOYSTICK_ADIis not set
#CONFIG_JOYSTICK_COBRAis not set
#CONFIG_JOYSTICK_GF2Kis not set
#CONFIG_JOYSTICK_GRIPis not set
#CONFIG_JOYSTICK_GRIP_MPis not set
#CONFIG_JOYSTICK_GUILLEMOTis not set
#CONFIG_JOYSTICK_INTERACTis not set
#CONFIG_JOYSTICK_SIDEWINDERis not set
#CONFIG_JOYSTICK_TMDCis not set
#CONFIG_JOYSTICK_IFORCEis not set
#CONFIG_JOYSTICK_WARRIORis not set
#CONFIG_JOYSTICK_MAGELLANis not set
#CONFIG_JOYSTICK_SPACEORBis not set
#CONFIG_JOYSTICK_SPACEBALLis not set
#CONFIG_JOYSTICK_STINGERis not set
#CONFIG_JOYSTICK_TWIDJOYis not set
#CONFIG_JOYSTICK_ZHENHUAis not set
#CONFIG_JOYSTICK_DB9is not set
#CONFIG_JOYSTICK_GAMECONis not set
#CONFIG_JOYSTICK_TURBOGRAFXis not set
#CONFIG_JOYSTICK_JOYDUMPis not set
#CONFIG_JOYSTICK_XPADis not set
#CONFIG_INPUT_TABLETis not setCONFIG_INPUT_TOUCHSCREEN=y
#CONFIG_TOUCHSCREEN_FUJITSUis not set
#CONFIG_TOUCHSCREEN_GUNZEis not set
#CONFIG_TOUCHSCREEN_ELOis not set
#CONFIG_TOUCHSCREEN_WACOM_W8001is not set
#CONFIG_TOUCHSCREEN_MTOUCHis not set
#CONFIG_TOUCHSCREEN_INEXIOis not set
#CONFIG_TOUCHSCREEN_MK712is not set
#CONFIG_TOUCHSCREEN_PENMOUNTis not set
#CONFIG_TOUCHSCREEN_TOUCHRIGHTis not set
#CONFIG_TOUCHSCREEN_TOUCHWINis not set
#CONFIG_TOUCHSCREEN_USB_COMPOSITEis not set
#CONFIG_TOUCHSCREEN_TOUCHIT213is not set
#CONFIG_TOUCHSCREEN_TSC2007is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=m
#CONFIG_INPUT_APANELis not set
#CONFIG_INPUT_ATLAS_BTNSis not set
#CONFIG_INPUT_ATI_REMOTEis not set
#CONFIG_INPUT_ATI_REMOTE2is not set
#CONFIG_INPUT_KEYSPAN_REMOTEis not set
#CONFIG_INPUT_POWERMATEis not set
#CONFIG_INPUT_YEALINKis not set
#CONFIG_INPUT_CM109is not set
#CONFIG_INPUT_UINPUTis not set#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
#CONFIG_SERIO_CT82C710is not set
#CONFIG_SERIO_PARKBDis not set
#CONFIG_SERIO_PCIPS2is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=m
#CONFIG_GAMEPORTis not set#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_DEVKMEM=yCONFIG_SERIAL_NONSTANDARD=y
#CONFIG_COMPUTONEis not set
#CONFIG_ROCKETPORTis not set
#CONFIG_CYCLADESis not set
#CONFIG_DIGIEPCAis not set
#CONFIG_MOXA_INTELLIOis not set
#CONFIG_MOXA_SMARTIOis not set
#CONFIG_ISIis not set
#CONFIG_SYNCLINKis not set
#CONFIG_SYNCLINKMPis not set
#CONFIG_SYNCLINK_GTis not set
#CONFIG_N_HDLCis not set
#CONFIG_RISCOM8is not set
#CONFIG_SPECIALIXis not set
#CONFIG_SXis not set
#CONFIG_RIOis not set
#CONFIG_STALDRVis not set
#CONFIG_NOZOMIis not set#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=y
#CONFIG_SERIAL_8250_CSis not setCONFIG_SERIAL_8250_NR_UARTS=32CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=yCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=y#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
#CONFIG_SERIAL_JSMis not setCONFIG_UNIX98_PTYS=y
#CONFIG_DEVPTS_MULTIPLE_INSTANCESis not set
#CONFIG_LEGACY_PTYSis not setCONFIG_PRINTER=mCONFIG_LP_CONSOLE=y
#CONFIG_PPDEVis not set
#CONFIG_IPMI_HANDLERis not setCONFIG_HW_RANDOM=y
#CONFIG_HW_RANDOM_INTELis not set
#CONFIG_HW_RANDOM_AMDis not setCONFIG_NVRAM=yCONFIG_RTC=y
#CONFIG_R3964is not set
#CONFIG_APPLICOMis not set#
# PCMCIA character devices
#
#CONFIG_SYNCLINK_CSis not set
#CONFIG_CARDMAN_4000is not set
#CONFIG_CARDMAN_4040is not set
#CONFIG_IPWIRELESSis not set
#CONFIG_MWAVEis not set
#CONFIG_PC8736x_GPIOis not setCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=8192CONFIG_HPET=y
#CONFIG_HPET_MMAPis not set
#CONFIG_HANGCHECK_TIMERis not set
#CONFIG_TCG_TPMis not set
#CONFIG_TELCLOCKis not setCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=y
#CONFIG_I2C_CHARDEVis not setCONFIG_I2C_HELPER_AUTO=y#
# I2C Hardware Bus support
##
# PC SMBus host controller drivers
#
#CONFIG_I2C_ALI1535is not set
#CONFIG_I2C_ALI1563is not set
#CONFIG_I2C_ALI15X3is not set
#CONFIG_I2C_AMD756is not set
#CONFIG_I2C_AMD8111is not set
#CONFIG_I2C_I801is not set
#CONFIG_I2C_ISCHis not setCONFIG_I2C_PIIX4=m
#CONFIG_I2C_NFORCE2is not set
#CONFIG_I2C_SIS5595is not set
#CONFIG_I2C_SIS630is not set
#CONFIG_I2C_SIS96Xis not set
#CONFIG_I2C_VIAis not set
#CONFIG_I2C_VIAPROis not set#
# I2C system bus drivers (mostly embedded / system-on-chip) #
#CONFIG_I2C_OCORESis not set
#CONFIG_I2C_SIMTECis not set#
# External I2C/SMBus adapter drivers
#
#CONFIG_I2C_PARPORTis not set
#CONFIG_I2C_PARPORT_LIGHTis not set
#CONFIG_I2C_TAOS_EVMis not set
#CONFIG_I2C_TINY_USBis not set#
# Graphics adapter I2C/DDC channel drivers
#
#CONFIG_I2C_VOODOO3is not set#
# Other I2C/SMBus bus drivers
#
#CONFIG_I2C_PCA_PLATFORMis not set
#CONFIG_I2C_STUBis not set#
# Miscellaneous I2C Chip support
#
#CONFIG_DS1682is not set
#CONFIG_SENSORS_PCF8574is not set
#CONFIG_PCF8575is not set
#CONFIG_SENSORS_PCA9539is not set
#CONFIG_SENSORS_PCF8591is not set
#CONFIG_SENSORS_MAX6875is not set
#CONFIG_SENSORS_TSL2550is not set
#CONFIG_I2C_DEBUG_COREis not set
#CONFIG_I2C_DEBUG_ALGOis not set
#CONFIG_I2C_DEBUG_BUSis not set
#CONFIG_I2C_DEBUG_CHIPis not set
#CONFIG_SPIis not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
#CONFIG_GPIOLIBis not set
#CONFIG_W1is not setCONFIG_POWER_SUPPLY=y
#CONFIG_POWER_SUPPLY_DEBUGis not set
#CONFIG_PDA_POWERis not set
#CONFIG_BATTERY_DS2760is not set
#CONFIG_BATTERY_BQ27x00is not set
#CONFIG_HWMONis not setCONFIG_THERMAL=yCONFIG_WATCHDOG=y
#CONFIG_WATCHDOG_NOWAYOUTis not set#
# Watchdog Device Drivers
#
#CONFIG_SOFT_WATCHDOGis not set
#CONFIG_ACQUIRE_WDTis not set
#CONFIG_ADVANTECH_WDTis not set
#CONFIG_ALIM1535_WDTis not set
#CONFIG_ALIM7101_WDTis not set
#CONFIG_SC520_WDTis not set
#CONFIG_EUROTECH_WDTis not set
#CONFIG_IB700_WDTis not set
#CONFIG_IBMASRis not set
#CONFIG_WAFER_WDTis not set
#CONFIG_I6300ESB_WDTis not set
#CONFIG_ITCO_WDTis not set
#CONFIG_IT8712F_WDTis not set
#CONFIG_IT87_WDTis not set
#CONFIG_HP_WATCHDOGis not set
#CONFIG_SC1200_WDTis not set
#CONFIG_PC87413_WDTis not set
#CONFIG_60XX_WDTis not set
#CONFIG_SBC8360_WDTis not set
#CONFIG_CPU5_WDTis not set
#CONFIG_SMSC_SCH311X_WDTis not set
#CONFIG_SMSC37B787_WDTis not set
#CONFIG_W83627HF_WDTis not set
#CONFIG_W83697HF_WDTis not set
#CONFIG_W83697UG_WDTis not set
#CONFIG_W83877F_WDTis not set
#CONFIG_W83977F_WDTis not set
#CONFIG_MACHZ_WDTis not set
#CONFIG_SBC_EPX_C3_WATCHDOGis not set#
# PCI-based Watchdog Cards
#
#CONFIG_PCIPCWATCHDOGis not set
#CONFIG_WDTPCIis not set#
# USB-based Watchdog Cards
#
#CONFIG_USBPCWATCHDOGis not setCONFIG_SSB_POSSIBLE=y#
# Sonics Silicon Backplane
#
#CONFIG_SSBis not set#
# Multifunction device drivers
#
#CONFIG_MFD_COREis not set
#CONFIG_MFD_SM501is not set
#CONFIG_HTC_PASIC3is not set
#CONFIG_MFD_TMIOis not set
#CONFIG_MFD_WM8400is not set
#CONFIG_MFD_PCF50633is not set
#CONFIG_REGULATORis not set#
# Multimedia devices
##
# Multimedia core support
#
#CONFIG_VIDEO_DEVis not set
#CONFIG_DVB_COREis not set
#CONFIG_VIDEO_MEDIAis not set#
# Multimedia drivers
#
#CONFIG_DABis not set#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=yCONFIG_AGP_SIS=yCONFIG_AGP_VIA=y
#CONFIG_DRMis not set
#CONFIG_VGASTATEis not set
#CONFIG_VIDEO_OUTPUT_CONTROLis not setCONFIG_FB=y
#CONFIG_FIRMWARE_EDIDis not set
#CONFIG_FB_DDCis not setCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
#CONFIG_FB_CFB_REV_PIXELS_IN_BYTEis not set
#CONFIG_FB_SYS_FILLRECTis not set
#CONFIG_FB_SYS_COPYAREAis not set
#CONFIG_FB_SYS_IMAGEBLITis not set
#CONFIG_FB_FOREIGN_ENDIANis not set
#CONFIG_FB_SYS_FOPSis not set
#CONFIG_FB_SVGALIBis not set
#CONFIG_FB_MACMODESis not set
#CONFIG_FB_BACKLIGHTis not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y#
# Frame buffer hardware drivers
#
#CONFIG_FB_CIRRUSis not set
#CONFIG_FB_PM2is not set
#CONFIG_FB_CYBER2000is not set
#CONFIG_FB_ARCis not set
#CONFIG_FB_ASILIANTis not set
#CONFIG_FB_IMSTTis not set
#CONFIG_FB_VGA16is not set
#CONFIG_FB_UVESAis not setCONFIG_FB_VESA=y
#CONFIG_FB_N411is not set
#CONFIG_FB_HGAis not set
#CONFIG_FB_S1D13XXXis not set
#CONFIG_FB_NVIDIAis not set
#CONFIG_FB_RIVAis not set
#CONFIG_FB_LE80578is not set
#CONFIG_FB_INTELis not set
#CONFIG_FB_MATROXis not set
#CONFIG_FB_RADEONis not set
#CONFIG_FB_ATY128is not set
#CONFIG_FB_ATYis not set
#CONFIG_FB_S3is not set
#CONFIG_FB_SAVAGEis not set
#CONFIG_FB_SISis not set
#CONFIG_FB_VIAis not set
#CONFIG_FB_NEOMAGICis not set
#CONFIG_FB_KYROis not set
#CONFIG_FB_3DFXis not set
#CONFIG_FB_VOODOO1is not set
#CONFIG_FB_VT8623is not set
#CONFIG_FB_TRIDENTis not set
#CONFIG_FB_ARKis not set
#CONFIG_FB_PM3is not set
#CONFIG_FB_CARMINEis not set
#CONFIG_FB_GEODEis not set
#CONFIG_FB_VIRTUALis not set
#CONFIG_FB_METRONOMEis not set
#CONFIG_FB_MB862XXis not setCONFIG_BACKLIGHT_LCD_SUPPORT=y
#CONFIG_LCD_CLASS_DEVICEis not set
#CONFIG_BACKLIGHT_CLASS_DEVICEis not set#
# Display device support
#
#CONFIG_DISPLAY_SUPPORTis not set#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=y
#CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARYis not setCONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
#CONFIG_FONTSis not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_LOGO=y
#CONFIG_LOGO_LINUX_MONOis not set
#CONFIG_LOGO_LINUX_VGA16is not setCONFIG_LOGO_LINUX_CLUT224=y
#CONFIG_SOUNDis not setCONFIG_HID_SUPPORT=yCONFIG_HID=yCONFIG_HID_DEBUG=y
#CONFIG_HIDRAWis not set#
# USB Input Devices
#CONFIG_USB_HID=yCONFIG_HID_PID=yCONFIG_USB_HIDDEV=y#
# Special HID drivers
#CONFIG_HID_COMPAT=yCONFIG_HID_A4TECH=yCONFIG_HID_APPLE=yCONFIG_HID_BELKIN=yCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=yCONFIG_HID_CYPRESS=yCONFIG_HID_EZKEY=yCONFIG_HID_GYRATION=yCONFIG_HID_LOGITECH=yCONFIG_LOGITECH_FF=y
#CONFIG_LOGIRUMBLEPAD2_FFis not setCONFIG_HID_MICROSOFT=yCONFIG_HID_MONTEREY=yCONFIG_HID_NTRIG=yCONFIG_HID_PANTHERLORD=y
#CONFIG_PANTHERLORD_FFis not setCONFIG_HID_PETALYNX=yCONFIG_HID_SAMSUNG=yCONFIG_HID_SONY=yCONFIG_HID_SUNPLUS=y
#CONFIG_GREENASIA_FFis not setCONFIG_HID_TOPSEED=yCONFIG_THRUSTMASTER_FF=y
#CONFIG_ZEROPLUS_FFis not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
#CONFIG_USB_DEBUGis not set
#CONFIG_USB_ANNOUNCE_NEW_DEVICESis not set#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=y
#CONFIG_USB_DYNAMIC_MINORSis not set
#CONFIG_USB_SUSPENDis not set
#CONFIG_USB_OTGis not setCONFIG_USB_MON=y
#CONFIG_USB_WUSBis not set
#CONFIG_USB_WUSB_CBAFis not set#
# USB Host Controller Drivers
#
#CONFIG_USB_C67X00_HCDis not setCONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
#CONFIG_USB_OXU210HP_HCDis not set
#CONFIG_USB_ISP116X_HCDis not set
#CONFIG_USB_ISP1760_HCDis not setCONFIG_USB_OHCI_HCD=m
#CONFIG_USB_OHCI_BIG_ENDIAN_DESCis not set
#CONFIG_USB_OHCI_BIG_ENDIAN_MMIOis not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=m
#CONFIG_USB_SL811_HCDis not set
#CONFIG_USB_R8A66597_HCDis not set
#CONFIG_USB_HWA_HCDis not set#
# USB Device Class drivers
#
#CONFIG_USB_ACMis not set
#CONFIG_USB_PRINTERis not set
#CONFIG_USB_WDMis not set
#CONFIG_USB_TMCis not set#
# NOTE:USB_STORAGEdepends on SCSI butBLK_DEV_SDmay also be needed; ##
# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set#
# USB Imaging devices
#
#CONFIG_USB_MDC800is not set
#CONFIG_USB_MICROTEKis not set#
# USB port drivers
#
#CONFIG_USB_USS720is not set
#CONFIG_USB_SERIALis not set#
# USB Miscellaneous drivers
#
#CONFIG_USB_EMI62is not set
#CONFIG_USB_EMI26is not set
#CONFIG_USB_ADUTUXis not set
#CONFIG_USB_SEVSEGis not set
#CONFIG_USB_RIO500is not set
#CONFIG_USB_LEGOTOWERis not set
#CONFIG_USB_LCDis not set
#CONFIG_USB_BERRY_CHARGEis not set
#CONFIG_USB_LEDis not set
#CONFIG_USB_CYPRESS_CY7C63is not set
#CONFIG_USB_CYTHERMis not set
#CONFIG_USB_PHIDGETis not set
#CONFIG_USB_IDMOUSEis not set
#CONFIG_USB_FTDI_ELANis not set
#CONFIG_USB_APPLEDISPLAYis not set
#CONFIG_USB_SISUSBVGAis not set
#CONFIG_USB_LDis not set
#CONFIG_USB_TRANCEVIBRATORis not set
#CONFIG_USB_IOWARRIORis not set
#CONFIG_USB_TESTis not set
#CONFIG_USB_ISIGHTFWis not set
#CONFIG_USB_VSTis not set#
# OTG and related infrastructure
#
#CONFIG_UWBis not set
#CONFIG_MMCis not set
#CONFIG_MEMSTICKis not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y#
# LED drivers
#
#CONFIG_LEDS_ALIX2is not set
#CONFIG_LEDS_PCA9532is not set
#CONFIG_LEDS_CLEVO_MAILis not set
#CONFIG_LEDS_PCA955Xis not set#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=y
#CONFIG_LEDS_TRIGGER_TIMERis not setCONFIG_LEDS_TRIGGER_IDE_DISK=y
#CONFIG_LEDS_TRIGGER_HEARTBEATis not set
#CONFIG_LEDS_TRIGGER_BACKLIGHTis not set
#CONFIG_LEDS_TRIGGER_DEFAULT_ONis not set
#CONFIG_ACCESSIBILITYis not setCONFIG_EDAC=y#
# Reporting subsystems
#
#CONFIG_EDAC_DEBUGis not set
#CONFIG_EDAC_MM_EDACis not set
#CONFIG_RTC_CLASSis not set
#CONFIG_DMADEVICESis not set
#CONFIG_AUXDISPLAYis not set
#CONFIG_UIOis not set
#CONFIG_STAGINGis not setCONFIG_X86_PLATFORM_DEVICES=y
#CONFIG_ASUS_LAPTOPis not set
#CONFIG_SONY_LAPTOPis not set
#CONFIG_THINKPAD_ACPIis not set
#CONFIG_INTEL_MENLOWis not set
#CONFIG_EEEPC_LAPTOPis not set
#CONFIG_ACPI_WMIis not set
#CONFIG_ACPI_ASUSis not set
#CONFIG_ACPI_TOSHIBAis not set#
# Firmware Drivers
#
#CONFIG_EDDis not setCONFIG_FIRMWARE_MEMMAP=y
#CONFIG_DELL_RBUis not set
#CONFIG_DCDBASis not setCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=y
#CONFIG_ISCSI_IBFTis not set#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=yCONFIG_EXT2_FS_XIP=yCONFIG_EXT3_FS=mCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
#CONFIG_EXT4_FSis not setCONFIG_FS_XIP=yCONFIG_JBD=m
#CONFIG_JBD_DEBUGis not setCONFIG_FS_MBCACHE=y
#CONFIG_REISERFS_FSis not set
#CONFIG_JFS_FSis not setCONFIG_FS_POSIX_ACL=yCONFIG_FILE_LOCKING=y
#CONFIG_XFS_FSis not set
#CONFIG_GFS2_FSis not set
#CONFIG_OCFS2_FSis not set
#CONFIG_BTRFS_FSis not setCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=y
#CONFIG_QUOTA_NETLINK_INTERFACEis not setCONFIG_PRINT_QUOTA_WARNING=yCONFIG_QUOTA_TREE=y
#CONFIG_QFMT_V1is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=y
#CONFIG_AUTOFS_FSis not setCONFIG_AUTOFS4_FS=m
#CONFIG_FUSE_FSis not set#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=y
#CONFIG_UDF_FSis not set#
# DOS/FAT/NT Filesystems
#
#CONFIG_MSDOS_FSis not set
#CONFIG_VFAT_FSis not set
#CONFIG_NTFS_FSis not set#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_VMCORE=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=y
#CONFIG_TMPFS_POSIX_ACLis not setCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=y
#CONFIG_CONFIGFS_FSis not setCONFIG_MISC_FILESYSTEMS=y
#CONFIG_ADFS_FSis not set
#CONFIG_AFFS_FSis not set
#CONFIG_ECRYPT_FSis not set
#CONFIG_HFS_FSis not set
#CONFIG_HFSPLUS_FSis not set
#CONFIG_BEFS_FSis not set
#CONFIG_BFS_FSis not set
#CONFIG_EFS_FSis not set
#CONFIG_CRAMFSis not set
#CONFIG_SQUASHFSis not set
#CONFIG_VXFS_FSis not set
#CONFIG_MINIX_FSis not set
#CONFIG_OMFS_FSis not set
#CONFIG_HPFS_FSis not set
#CONFIG_QNX4FS_FSis not set
#CONFIG_ROMFS_FSis not set
#CONFIG_SYSV_FSis not set
#CONFIG_UFS_FSis not setCONFIG_NETWORK_FILESYSTEMS=y
#CONFIG_NFS_FSis not set
#CONFIG_NFSDis not set
#CONFIG_SMB_FSis not set
#CONFIG_CIFSis not set
#CONFIG_NCP_FSis not set
#CONFIG_CODA_FSis not set
#CONFIG_AFS_FSis not set#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
#CONFIG_ACORN_PARTITIONis not setCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=y
#CONFIG_ATARI_PARTITIONis not setCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=y
#CONFIG_LDM_PARTITIONis not setCONFIG_SGI_PARTITION=y
#CONFIG_ULTRIX_PARTITIONis not setCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
#CONFIG_SYSV68_PARTITIONis not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8"CONFIG_NLS_CODEPAGE_437=y
#CONFIG_NLS_CODEPAGE_737is not set
#CONFIG_NLS_CODEPAGE_775is not set
#CONFIG_NLS_CODEPAGE_850is not set
#CONFIG_NLS_CODEPAGE_852is not set
#CONFIG_NLS_CODEPAGE_855is not set
#CONFIG_NLS_CODEPAGE_857is not set
#CONFIG_NLS_CODEPAGE_860is not set
#CONFIG_NLS_CODEPAGE_861is not set
#CONFIG_NLS_CODEPAGE_862is not set
#CONFIG_NLS_CODEPAGE_863is not set
#CONFIG_NLS_CODEPAGE_864is not set
#CONFIG_NLS_CODEPAGE_865is not set
#CONFIG_NLS_CODEPAGE_866is not set
#CONFIG_NLS_CODEPAGE_869is not set
#CONFIG_NLS_CODEPAGE_936is not set
#CONFIG_NLS_CODEPAGE_950is not set
#CONFIG_NLS_CODEPAGE_932is not set
#CONFIG_NLS_CODEPAGE_949is not set
#CONFIG_NLS_CODEPAGE_874is not set
#CONFIG_NLS_ISO8859_8is not set
#CONFIG_NLS_CODEPAGE_1250is not set
#CONFIG_NLS_CODEPAGE_1251is not setCONFIG_NLS_ASCII=y
#CONFIG_NLS_ISO8859_1is not set
#CONFIG_NLS_ISO8859_2is not set
#CONFIG_NLS_ISO8859_3is not set
#CONFIG_NLS_ISO8859_4is not set
#CONFIG_NLS_ISO8859_5is not set
#CONFIG_NLS_ISO8859_6is not set
#CONFIG_NLS_ISO8859_7is not set
#CONFIG_NLS_ISO8859_9is not set
#CONFIG_NLS_ISO8859_13is not set
#CONFIG_NLS_ISO8859_14is not set
#CONFIG_NLS_ISO8859_15is not set
#CONFIG_NLS_KOI8_Ris not set
#CONFIG_NLS_KOI8_Uis not set
#CONFIG_NLS_UTF8is not set
#CONFIG_DLMis not set#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#CONFIG_PRINTK_TIMEis not setCONFIG_ALLOW_WARNINGS=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y
#CONFIG_UNUSED_SYMBOLSis not setCONFIG_DEBUG_FS=y
#CONFIG_HEADERS_CHECKis not set
#CONFIG_DEBUG_SECTION_MISMATCHis not setCONFIG_DEBUG_KERNEL=y
#CONFIG_DEBUG_SHIRQis not setCONFIG_DETECT_SOFTLOCKUP=y
#CONFIG_BOOTPARAM_SOFTLOCKUP_PANICis not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=y
#CONFIG_BOOTPARAM_HUNG_TASK_PANICis not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=y
#CONFIG_TIMER_STATSis not set
#CONFIG_DEBUG_OBJECTSis not set
#CONFIG_DEBUG_SLABis not set
#CONFIG_DEBUG_RT_MUTEXESis not set
#CONFIG_RT_MUTEX_TESTERis not set
#CONFIG_DEBUG_SPINLOCKis not set
#CONFIG_DEBUG_MUTEXESis not set
#CONFIG_DEBUG_LOCK_ALLOCis not set
#CONFIG_PROVE_LOCKINGis not set
#CONFIG_LOCK_STATis not setCONFIG_TRACE_IRQFLAGS=y
#CONFIG_DEBUG_SPINLOCK_SLEEPis not set
#CONFIG_DEBUG_LOCKING_API_SELFTESTSis not setCONFIG_STACKTRACE=y
#CONFIG_DEBUG_KOBJECTis not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=y
#CONFIG_DEBUG_VMis not set
#CONFIG_DEBUG_VIRTUALis not set
#CONFIG_DEBUG_WRITECOUNTis not setCONFIG_DEBUG_MEMORY_INIT=yCONFIG_DEBUG_LIST=y
#CONFIG_DEBUG_SGis not set
#CONFIG_DEBUG_NOTIFIERSis not setCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=y
#CONFIG_BOOT_PRINTK_DELAYis not set
#CONFIG_RCU_TORTURE_TESTis not set
#CONFIG_RCU_CPU_STALL_DETECTORis not set
#CONFIG_KPROBES_SANITY_TESTis not set
#CONFIG_BACKTRACE_SELF_TESTis not set
#CONFIG_DEBUG_BLOCK_EXT_DEVTis not set
#CONFIG_LKDTMis not set
#CONFIG_FAULT_INJECTIONis not set
#CONFIG_LATENCYTOPis not set
#CONFIG_SYSCTL_SYSCALL_CHECKis not setCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE_NMI_ENTER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_HW_BRANCH_TRACER=yCONFIG_HAVE_FTRACE_SYSCALLS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_FTRACE_NMI_ENTER=yCONFIG_TRACING=yCONFIG_TRACING_SUPPORT=y#
# Tracers
#CONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=yCONFIG_IRQSOFF_TRACER=yCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_EVENT_TRACER=yCONFIG_FTRACE_SYSCALLS=yCONFIG_BOOT_TRACER=yCONFIG_TRACE_BRANCH_PROFILING=yCONFIG_PROFILE_ALL_BRANCHES=yCONFIG_TRACING_BRANCHES=yCONFIG_BRANCH_TRACER=yCONFIG_POWER_TRACER=yCONFIG_STACK_TRACER=yCONFIG_HW_BRANCH_TRACER=yCONFIG_KMEMTRACE=yCONFIG_WORKQUEUE_TRACER=yCONFIG_BLK_DEV_IO_TRACE=yCONFIG_DYNAMIC_FTRACE=yCONFIG_FUNCTION_PROFILER=yCONFIG_FTRACE_MCOUNT_RECORD=yCONFIG_FTRACE_SELFTEST=yCONFIG_FTRACE_STARTUP_TEST=yCONFIG_MMIOTRACE=y
#CONFIG_MMIOTRACE_TESTis not set
#CONFIG_PROVIDE_OHCI1394_DMA_INITis not set
#CONFIG_DYNAMIC_PRINTK_DEBUGis not set
#CONFIG_DMA_API_DEBUGis not setCONFIG_SAMPLES=y
#CONFIG_SAMPLE_MARKERSis not set
#CONFIG_SAMPLE_TRACEPOINTSis not set
#CONFIG_SAMPLE_KOBJECTis not set
#CONFIG_SAMPLE_KPROBESis not setCONFIG_HAVE_ARCH_KGDB=y
#CONFIG_KGDBis not setCONFIG_HAVE_ARCH_KMEMCHECK=y
#CONFIG_STRICT_DEVMEMis not setCONFIG_X86_VERBOSE_BOOTUP=yCONFIG_EARLY_PRINTK=y
#CONFIG_EARLY_PRINTK_DBGPis not setCONFIG_DEBUG_STACKOVERFLOW=y
#CONFIG_DEBUG_STACK_USAGEis not set
#CONFIG_DEBUG_PAGEALLOCis not set
#CONFIG_DEBUG_PER_CPU_MAPSis not set
#CONFIG_X86_PTDUMPis not setCONFIG_DEBUG_RODATA=y
#CONFIG_DEBUG_RODATA_TESTis not set
#CONFIG_DEBUG_NX_TESTis not set
#CONFIG_IOMMU_DEBUGis not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
#CONFIG_IO_DELAY_0XEDis not set
#CONFIG_IO_DELAY_UDELAYis not set
#CONFIG_IO_DELAY_NONEis not setCONFIG_DEFAULT_IO_DELAY_TYPE=0
#CONFIG_DEBUG_BOOT_PARAMSis not set
#CONFIG_CPA_DEBUGis not set
#CONFIG_OPTIMIZE_INLININGis not set#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY=y
#CONFIG_SECURITYFSis not setCONFIG_SECURITY_NETWORK=yCONFIG_SECURITY_NETWORK_XFRM=y
#CONFIG_SECURITY_PATHis not set
#CONFIG_SECURITY_FILE_CAPABILITIESis not set
#CONFIG_SECURITY_ROOTPLUGis not setCONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0CONFIG_SECURITY_SELINUX=yCONFIG_SECURITY_SELINUX_BOOTPARAM=yCONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1CONFIG_SECURITY_SELINUX_DISABLE=yCONFIG_SECURITY_SELINUX_DEVELOP=yCONFIG_SECURITY_SELINUX_AVC_STATS=yCONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
#CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAXis not set #CONFIG_SECURITY_SMACKis not setCONFIG_CRYPTO=y#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=y
#CONFIG_CRYPTO_GF128MULis not set
#CONFIG_CRYPTO_NULLis not set
#CONFIG_CRYPTO_CRYPTDis not set
#CONFIG_CRYPTO_AUTHENCis not set
#CONFIG_CRYPTO_TESTis not set#
# Authenticated Encryption with Associated Data
#
#CONFIG_CRYPTO_CCMis not set
#CONFIG_CRYPTO_GCMis not set
#CONFIG_CRYPTO_SEQIVis not set#
# Block modes
#
#CONFIG_CRYPTO_CBCis not set
#CONFIG_CRYPTO_CTRis not set
#CONFIG_CRYPTO_CTSis not set
#CONFIG_CRYPTO_ECBis not set
#CONFIG_CRYPTO_LRWis not set
#CONFIG_CRYPTO_PCBCis not set
#CONFIG_CRYPTO_XTSis not set#
# Hash modes
#CONFIG_CRYPTO_HMAC=y
#CONFIG_CRYPTO_XCBCis not set#
# Digest
#CONFIG_CRYPTO_CRC32C=y
#CONFIG_CRYPTO_CRC32C_INTELis not set
#CONFIG_CRYPTO_MD4is not set
#CONFIG_CRYPTO_MD5is not set
#CONFIG_CRYPTO_MICHAEL_MICis not set
#CONFIG_CRYPTO_RMD128is not set
#CONFIG_CRYPTO_RMD160is not set
#CONFIG_CRYPTO_RMD256is not set
#CONFIG_CRYPTO_RMD320is not setCONFIG_CRYPTO_SHA1=y
#CONFIG_CRYPTO_SHA256is not set
#CONFIG_CRYPTO_SHA512is not set
#CONFIG_CRYPTO_TGR192is not set
#CONFIG_CRYPTO_WP512is not set#
# Ciphers
#
#CONFIG_CRYPTO_AESis not set
#CONFIG_CRYPTO_AES_X86_64is not set
#CONFIG_CRYPTO_ANUBISis not set
#CONFIG_CRYPTO_ARC4is not set
#CONFIG_CRYPTO_BLOWFISHis not set
#CONFIG_CRYPTO_CAMELLIAis not set
#CONFIG_CRYPTO_CAST5is not set
#CONFIG_CRYPTO_CAST6is not set
#CONFIG_CRYPTO_DESis not set
#CONFIG_CRYPTO_FCRYPTis not set
#CONFIG_CRYPTO_KHAZADis not set
#CONFIG_CRYPTO_SALSA20is not set
#CONFIG_CRYPTO_SALSA20_X86_64is not set
#CONFIG_CRYPTO_SEEDis not set
#CONFIG_CRYPTO_SERPENTis not set
#CONFIG_CRYPTO_TEAis not set
#CONFIG_CRYPTO_TWOFISHis not set
#CONFIG_CRYPTO_TWOFISH_X86_64is not set#
# Compression
#
#CONFIG_CRYPTO_DEFLATEis not set
#CONFIG_CRYPTO_LZOis not set#
# Random Number Generation
#
#CONFIG_CRYPTO_ANSI_CPRNGis not setCONFIG_CRYPTO_HW=y
#CONFIG_CRYPTO_DEV_HIFN_795Xis not setCONFIG_HAVE_KVM=yCONFIG_VIRTUALIZATION=y
#CONFIG_KVMis not set
#CONFIG_VIRTIO_PCIis not set
#CONFIG_VIRTIO_BALLOONis not setCONFIG_BINARY_PRINTF=y#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=y
#CONFIG_CRC_CCITTis not set
#CONFIG_CRC16is not set
#CONFIG_CRC_T10DIFis not set
#CONFIG_CRC_ITU_Tis not setCONFIG_CRC32=y
#CONFIG_CRC7is not setCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_DECOMPRESS_GZIP=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=y
Steven Rostedt
maintainerQuoted 50 lines · Frederic Weisbecker
Quoted 37 lines · Maneesh Soni
I hit the below oops while playing with "wakeup" tracer. Just enabled tracing and ran "while true; do cat trace; done" on a 8-way systems with -tip at commit
9e25bacc221318a29d37425e054c01047edad7f5.Attached the .config.
Thanks
ManeeshBUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff802d2258>] probe_wakeup_sched_switch+0xd1/0x1ae PGD 219147067 PUD 1e449e067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:0c/0000:0c:00.0/irq CPU 5 Modules linked in: autofs4 hidp rfcomm l2cap bluetooth iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport sg sr_mod ide_cd_mod cdrom serio_raw acpi_memhotplug button tg3 libphy i2c_piix4 i2c_core pcspkr usb_storage uhci_hcd ohci_hcd ehci_hcd aacraid sd_mod scsi_mod ext3 jbd Pid: 5937, comm: cat Not tainted 2.6.29-tip-test #1 eserver xSeries 366-[88632RA]- RIP: 0010:[<ffffffff802d2258>] [<ffffffff802d2258>] probe_wakeup_sched_switch+0xd1/0x1ae RSP: 0000:ffff8801cf4cdea0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88022f232820 RCX: 0000000000000046 RDX: ffff8800281989a0 RSI: ffffffff8020d56d RDI: ffffffff811de480 RBP: ffff8801cf4cded0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000046 R13: 0000000000000000 R14: ffff8801e4471820 R15: 0000000000000005 FS: 00007f607411c6e0(0000) GS:ffff88002818b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 00000001da19a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cat (pid: 5937, threadinfo ffff8801cf4cc000, task ffff8801e4471820) Stack: ffff8800281989a0 ffff8802191e14b0 ffff88002819dd40 00007fff7c130640 0000000000000000 ffff88002819dd40 ffff8801cf4cdf70 ffffffff806f8264 0000000000000002 ffff8801cf4cdf48 ffff8801e4471820 ffff88022f232820 Call Trace:Quoted 9 lines
[<ffffffff806f8264>] schedule+0xd99/0x10f9 [<ffffffff806fb61b>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8020d56d>] retint_careful+0x12/0x2e Code: f2 83 3d 1b b0 9f 00 00 74 77 48 3b 1d a2 de f2 00 75 6e 48 8b 4d 00 48 8b 3d 8d de f2 00 45 89 e8 48 8b 01 48 8b 71 08 4c 89 e1 <48> 8b 50 08 e8 f7 9f ff ff 48 8b 3d 70 de f2 00 45 89 e8 48 89 RIP [<ffffffff802d2258>] probe_wakeup_sched_switch+0xd1/0x1ae RSP <ffff8801cf4cdea0> CR2: 0000000000000008 ---[ end trace ab11daa90bb147ba ]---
Quoted 3 lines
I've tested the same config and ran your script with wakeup tracer but nothing weird happened.
Though I've tested on UP so may be I should try on SMP.
Yeah, that may make a difference ;-)
-- Steve
Steven Rostedt
maintainerQuoted 53 lines · Steven Rostedt
Quoted 50 lines · Frederic Weisbecker
Quoted 46 lines · Maneesh Soni
I hit the below oops while playing with "wakeup" tracer. Just enabled tracing and ran "while true; do cat trace; done" on a 8-way systems with -tip at commit
9e25bacc221318a29d37425e054c01047edad7f5.Attached the .config.
Thanks
ManeeshBUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff802d2258>] probe_wakeup_sched_switch+0xd1/0x1ae PGD 219147067 PUD 1e449e067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:0c/0000:0c:00.0/irq CPU 5 Modules linked in: autofs4 hidp rfcomm l2cap bluetooth iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport sg sr_mod ide_cd_mod cdrom serio_raw acpi_memhotplug button tg3 libphy i2c_piix4 i2c_core pcspkr usb_storage uhci_hcd ohci_hcd ehci_hcd aacraid sd_mod scsi_mod ext3 jbd Pid: 5937, comm: cat Not tainted 2.6.29-tip-test #1 eserver xSeries 366-[88632RA]- RIP: 0010:[<ffffffff802d2258>] [<ffffffff802d2258>] probe_wakeup_sched_switch+0xd1/0x1ae RSP: 0000:ffff8801cf4cdea0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88022f232820 RCX: 0000000000000046 RDX: ffff8800281989a0 RSI: ffffffff8020d56d RDI: ffffffff811de480 RBP: ffff8801cf4cded0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000046 R13: 0000000000000000 R14: ffff8801e4471820 R15: 0000000000000005 FS: 00007f607411c6e0(0000) GS:ffff88002818b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 00000001da19a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cat (pid: 5937, threadinfo ffff8801cf4cc000, task ffff8801e4471820) Stack: ffff8800281989a0 ffff8802191e14b0 ffff88002819dd40 00007fff7c130640 0000000000000000 ffff88002819dd40 ffff8801cf4cdf70 ffffffff806f8264 0000000000000002 ffff8801cf4cdf48 ffff8801e4471820 ffff88022f232820 Call Trace: [<ffffffff806f8264>] schedule+0xd99/0x10f9 [<ffffffff806fb61b>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8020d56d>] retint_careful+0x12/0x2e Code: f2 83 3d 1b b0 9f 00 00 74 77 48 3b 1d a2 de f2 00 75 6e 48 8b 4d 00 48 8b 3d 8d de f2 00 45 89 e8 48 8b 01 48 8b 71 08 4c 89 e1 <48> 8b 50 08 e8 f7 9f ff ff 48 8b 3d 70 de f2 00 45 89 e8 48 89 RIP [<ffffffff802d2258>] probe_wakeup_sched_switch+0xd1/0x1ae RSP <ffff8801cf4cdea0> CR2: 0000000000000008 ---[ end trace ab11daa90bb147ba ]---
Quoted 5 lines
Quoted 3 lines
I've tested the same config and ran your script with wakeup tracer but nothing weird happened.
Though I've tested on UP so may be I should try on SMP.Yeah, that may make a difference ;-)
Looking at the code, I would say it is definitely SMP related. The issue is that he's reading the trace file over and over again. Reading the trace tries to stop the current tracer while it reads. When it stops reading, it restarts the tracer. This does a reset of the buffers. There is the wakeup lock that is suppose to protect it.
But I've changed this code slightly to allow the stopping to be done in atomic operations. Thus I no longer remove the trace points on a stop. This now changes the way things work since I first wrote the locking code. So I need to go back and review it to see if I've just opened up a race window.
Thanks for testing and reporting this!
-- Steve
Steven Rostedt
maintainer[PATCH][GIT PULL] tracing/wakeup: move access to wakeup_cpu into spinlock
In reply to Steven RostedtIngo,
I believe this is the fix for the oops that Maneesh saw. What he explains he did sounds like it would trigger the race. Reading the trace output resets wakeup_task to NULL and wakeup_cpu to -1. And he hit the bug by just reading the trace in a while loop.
Please pull the latest tip/tracing/ftrace-1 tree, which can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace.git
tip/tracing/ftrace-1
Steven Rostedt (1):
tracing/wakeup: move access to wakeup_cpu into spinlock
----
kernel/trace/trace_sched_wakeup.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) --------------------------- commit 8ac070ca952d14c57e3d772e203fd117161cc596 Author: Steven Rostedt <[email protected]> Date: Thu Mar 26 10:25:24 2009 -0400
tracing/wakeup: move access to wakeup_cpu into spinlock
Impact: fix for race condition
The code had the following outside the lock:
if (next != wakeup_task)
return;
pc = preempt_count();
/* The task we are waiting for is waking up */ data = wakeup_trace->data[wakeup_cpu];
On initialization, wakeup_task is NULL and wakeup_cpu -1. This code is not under a lock. If wakeup_task is set on another CPU as that task is waking up, we can see the wakeup_task before wakeup_cpu is set. If we read wakeup_cpu while it is still -1 then we will have a bad data pointer.
This patch moves the reading of wakeup_cpu within the protection of the spinlock used to protect the writing of wakeup_cpu and wakeup_task.
kernel/trace/trace_sched_wakeup.c +3 -3
@@ -138,9 +138,6 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev, pc =preempt_count (); -/* The task we are waiting for is waking up */ - data = wakeup_trace->data[wakeup_cpu]; -/* disable local data, not wakeup_cpu data */ cpu =raw_smp_processor_id (); disabled =atomic_inc_return (&wakeup_trace->data[cpu]->disabled);
@@ -154,6 +151,9 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev,if (unlikely (!tracer_enabled || next != wakeup_task)) goto out_unlock; +/* The task we are waiting for is waking up */ + data = wakeup_trace->data[wakeup_cpu]; +trace_function (wakeup_trace,CALLER_ADDR1 ,CALLER_ADDR2 , flags, pc);tracing_sched_switch_trace (wakeup_trace, prev, next, flags, pc);
Re: [PATCH][GIT PULL] tracing/wakeup: move access to wakeup_cpu into spinlock
Quoted 67 lines · Steven Rostedt
Ingo,
I believe this is the fix for the oops that Maneesh saw. What he explains he did sounds like it would trigger the race. Reading the trace output resets
wakeup_taskto NULL andwakeup_cputo -1. And he hit the bug by just reading the trace in a while loop.Please pull the latest tip/tracing/ftrace-1 tree, which can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace.git
tip/tracing/ftrace-1Steven Rostedt (1):
tracing/wakeup: move access towakeup_cpuinto spinlock----
kernel/trace/trace_sched_wakeup.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) --------------------------- commit 8ac070ca952d14c57e3d772e203fd117161cc596 Author: Steven Rostedt <[email protected]> Date: Thu Mar 26 10:25:24 2009 -0400tracing/wakeup: move access to
wakeup_cpuinto spinlockImpact: fix for race condition
The code had the following outside the lock:
if (next !=
wakeup_task)
return;pc =
preempt_count();/* The task we are waiting for is waking up */ data = wakeup_trace->data[wakeup_cpu];
On initialization,
wakeup_taskis NULL andwakeup_cpu-1. This code is not under a lock. Ifwakeup_taskis set on another CPU as that task is waking up, we can see thewakeup_taskbeforewakeup_cpuis set. If we readwakeup_cpuwhile it is still -1 then we will have a bad data pointer.This patch moves the reading of
wakeup_cpuwithin the protection of the spinlock used to protect the writing ofwakeup_cpuandwakeup_task.Reported-by Maneesh Soni <[email protected]>Signed-off-by Steven Rostedt <[email protected]>kernel/trace/trace_sched_wakeup.c +0
-3@@ -138,9 +138,6 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev, pc =preempt_count (); -/* The task we are waiting for is waking up */ - data = wakeup_trace->data[wakeup_cpu]; -/* disable local data, not wakeup_cpu data */ cpu =raw_smp_processor_id (); disabled =atomic_inc_return (&wakeup_trace->data[cpu]->disabled);
kernel/trace/trace_sched_wakeup.c probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev, · line 159
Quoted 9 lines
kernel/trace/trace_sched_wakeup.c +3
-0@@ -154,6 +151,9 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev,if (unlikely (!tracer_enabled || next != wakeup_task)) goto out_unlock; +/* The task we are waiting for is waking up */ + data = wakeup_trace->data[wakeup_cpu]; +trace_function (wakeup_trace,CALLER_ADDR1 ,CALLER_ADDR2 , flags, pc);tracing_sched_switch_trace (wakeup_trace, prev, next, flags, pc);
Hi Steven,
I still the oops with the patch,
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac PGD 1d68e9067 PUD 1e6cdf067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:0c/0000:0c:00.0/irq CPU 5 Modules linked in: autofs4 hidp rfcomm l2cap bluetooth iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport sg sr_mod ide_cd_mod cdrom serio_raw acpi_memhotplug button tg3 libphy i2c_piix4 i2c_core pcspkr usb_storage uhci_hcd ohci_hcd ehci_hcd aacraid sd_mod scsi_mod ext3 jbd Pid: 6095, comm: cat Not tainted 2.6.29-tip-test #2 eserver xSeries 366-[88632RA]- RIP: 0010:[<ffffffff802d2259>] [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac RSP: 0000:ffff8801e6d03ea0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8800281989a0 RCX: 0000000000000046 RDX: ffff8800281989a0 RSI: ffffffff8020d56d RDI: ffffffff811de480 RBP: ffff8801e6d03ed0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000046 R13: ffff88022f232820 R14: 0000000000000000 R15: 0000000000000005 FS: 00007f98b94cb6e0(0000) GS:ffff88002818b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 0000000224595000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cat (pid: 6095, threadinfo ffff8801e6d02000, task ffff8801d6935040) Stack: ffff8801d6935040 ffff880224981230 ffff88002819dd40 0000003b4ae00aa0 00007fffc14df830 ffff88002819dd40 ffff8801e6d03f70 ffffffff806f8264 0000000000000002 ffff8801e6d03f48 ffff8801d6935040 ffff88022f232820 Call Trace: [<ffffffff806f8264>] schedule+0xd99/0x10f9 [<ffffffff806fb61b>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8027d2cb>] ? delayed_work_timer_fn+0x0/0x38 [<ffffffff8020d56d>] retint_careful+0x12/0x2e Code: 2d ad de f2 00 75 77 48 63 05 ac de f2 00 48 8b 4d 00 45 89 f0 48 8b 3d 8e de f2 00 48 8b 71 08 48 8b 5c c7 28 48 8b 01 4c 89 e1 <48> 8b 50 08 e8 f6 9f ff ff 48 8b 3d 6f de f2 00 48 8b 75 d0 45 RIP [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac RSP <ffff8801e6d03ea0>
CR2: 0000000000000008
thanks
Maneesh
Signature · 4 lines
Maneesh Soni Linux Technology Center IBM India Systems and Technology Lab, Bangalore, India.
Re: [PATCH][GIT PULL] tracing/wakeup: move access to wakeup_cpu into spinlock
Quoted 115 lines · Maneesh Soni
Quoted 67 lines · Steven Rostedt
Ingo,
I believe this is the fix for the oops that Maneesh saw. What he explains he did sounds like it would trigger the race. Reading the trace output resets
wakeup_taskto NULL andwakeup_cputo -1. And he hit the bug by just reading the trace in a while loop.Please pull the latest tip/tracing/ftrace-1 tree, which can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace.git
tip/tracing/ftrace-1Steven Rostedt (1):
tracing/wakeup: move access towakeup_cpuinto spinlock----
kernel/trace/trace_sched_wakeup.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) --------------------------- commit 8ac070ca952d14c57e3d772e203fd117161cc596 Author: Steven Rostedt <[email protected]> Date: Thu Mar 26 10:25:24 2009 -0400tracing/wakeup: move access to
wakeup_cpuinto spinlockImpact: fix for race condition
The code had the following outside the lock:
if (next !=
wakeup_task)
return;pc =
preempt_count();/* The task we are waiting for is waking up */ data = wakeup_trace->data[wakeup_cpu];
On initialization,
wakeup_taskis NULL andwakeup_cpu-1. This code is not under a lock. Ifwakeup_taskis set on another CPU as that task is waking up, we can see thewakeup_taskbeforewakeup_cpuis set. If we readwakeup_cpuwhile it is still -1 then we will have a bad data pointer.This patch moves the reading of
wakeup_cpuwithin the protection of the spinlock used to protect the writing ofwakeup_cpuandwakeup_task.Reported-by Maneesh Soni <[email protected]>Signed-off-by Steven Rostedt <[email protected]>kernel/trace/trace_sched_wakeup.c +0
-3@@ -138,9 +138,6 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev, pc =preempt_count (); -/* The task we are waiting for is waking up */ - data = wakeup_trace->data[wakeup_cpu]; -/* disable local data, not wakeup_cpu data */ cpu =raw_smp_processor_id (); disabled =atomic_inc_return (&wakeup_trace->data[cpu]->disabled);kernel/trace/trace_sched_wakeup.c probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev, · line 159
Quoted 9 lines
kernel/trace/trace_sched_wakeup.c +3
-0@@ -154,6 +151,9 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev,if (unlikely (!tracer_enabled || next != wakeup_task)) goto out_unlock; +/* The task we are waiting for is waking up */ + data = wakeup_trace->data[wakeup_cpu]; +trace_function (wakeup_trace,CALLER_ADDR1 ,CALLER_ADDR2 , flags, pc);tracing_sched_switch_trace (wakeup_trace, prev, next, flags, pc);Hi Steven,
I still the oops with the patch,
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac PGD 1d68e9067 PUD 1e6cdf067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:0c/0000:0c:00.0/irq CPU 5 Modules linked in: autofs4 hidp rfcomm l2cap bluetooth iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport sg sr_mod ide_cd_mod cdrom serio_raw acpi_memhotplug button tg3 libphy i2c_piix4 i2c_core pcspkr usb_storage uhci_hcd ohci_hcd ehci_hcd aacraid sd_mod scsi_mod ext3 jbd Pid: 6095, comm: cat Not tainted 2.6.29-tip-test #2 eserver xSeries 366-[88632RA]- RIP: 0010:[<ffffffff802d2259>] [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac RSP: 0000:ffff8801e6d03ea0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8800281989a0 RCX: 0000000000000046 RDX: ffff8800281989a0 RSI: ffffffff8020d56d RDI: ffffffff811de480 RBP: ffff8801e6d03ed0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000046 R13: ffff88022f232820 R14: 0000000000000000 R15: 0000000000000005 FS: 00007f98b94cb6e0(0000) GS:ffff88002818b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 0000000224595000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cat (pid: 6095, threadinfo ffff8801e6d02000, task ffff8801d6935040) Stack: ffff8801d6935040 ffff880224981230 ffff88002819dd40 0000003b4ae00aa0 00007fffc14df830 ffff88002819dd40 ffff8801e6d03f70 ffffffff806f8264 0000000000000002 ffff8801e6d03f48 ffff8801d6935040 ffff88022f232820 Call Trace: [<ffffffff806f8264>] schedule+0xd99/0x10f9 [<ffffffff806fb61b>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8027d2cb>] ? delayed_work_timer_fn+0x0/0x38 [<ffffffff8020d56d>] retint_careful+0x12/0x2e Code: 2d ad de f2 00 75 77 48 63 05 ac de f2 00 48 8b 4d 00 45 89 f0 48 8b 3d 8e de f2 00 48 8b 71 08 48 8b 5c c7 28 48 8b 01 4c 89 e1 <48> 8b 50 08 e8 f6 9f ff ff 48 8b 3d 6f de f2 00 48 8b 75 d0 45 RIP [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac RSP <ffff8801e6d03ea0>
Quoted 2 lines
CR2: 0000000000000008
I could get a kdump in my next attempt. Let me know if you want me to upload the dump somewhere. (700 MB compressed)
Some info from the dump using gdb & crash-utility.
(gdb) bt full
#0 0xffffffff802d2259 in probe_wakeup_sched_switch (rq=<value optimized out>,
prev=Cannot access memory at address 0xffff8801d05c7ea0 ) at kernel/trace/trace_sched_wakeup.c:157 data = (struct trace_array_cpu *) 0xffff8800281629a0 T0 = <value optimized out> T1 = <value optimized out> delta = <value optimized out> flags = 70 pc = 0
Cannot access memory at address 0xffff8801d05c7ed8
(gdb) print wakeup_trace
$7 = (struct trace_array *) 0xffffffff811de480
(gdb) print *(struct trace_array *) 0xffffffff811de480
$8 = {buffer = 0xffff88022f090440, entries = 1441792, cpu = 0,
time_start = 437360893965, waiter = 0x0, data = {0xffff8800281119a0,
0xffff88002812c9a0, 0xffff8800281479a0, 0xffff8800281629a0,
0xffff88002817d9a0, 0xffff8800281989a0, 0xffff8800281b39a0,
0xffff8800281ce9a0, 0x0 <repeats 247 times>}}(gdb) print tracer_enabled
$9 = 1
(gdb) print wakeup_cpu
$10 = 3
(gdb) info threads
8 process 0 0xffffffff80217024 in mwait_idle ()
at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732
7 process 0 0xffffffff80217024 in mwait_idle ()
at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732
6 process 0 0xffffffff80217024 in mwait_idle ()
at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732
5 process 0 0xffffffff80217024 in mwait_idle ()
at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732
* 4 process 5773 0xffffffff802d2259 in probe_wakeup_sched_switch (
rq=<value optimized out>, prev=Cannot access memory at address 0xffff8801d05c7ea0
) at kernel/trace/trace_sched_wakeup.c:157
3 process 0 0xffffffff80217024 in mwait_idle ()
at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732
2 process 0 0xffffffff80217024 in mwait_idle ()
at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732
1 process 0 0xffffffff80217024 in mwait_idle ()
at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732
(gdb) info registers
rax 0x0 0
rbx 0xffff8800281629a0 -131940722792032
rcx 0x46 70
rdx 0xffff8800281629a0 -131940722792032
rsi 0xffffffff8020d56d -2145331859
rdi 0xffffffff811de480 -2128747392
rbp 0xffff8801d05c7ed0 0xffff8801d05c7ed0
rsp 0xffff8801d05c7ea0 0xffff8801d05c7ea0
r8 0x0 0
r9 0x0 0
r10 0xffff8801d05c7eb0 -131933604643152
r11 0x1 1
r12 0x46 70
r13 0xffff88022f21d820 -131932014651360
r14 0x0 0
r15 0x3 3
rip 0xffffffff802d2259 0xffffffff802d2259 <probe_wakeup_sched_switch+210>
eflags 0x10046 [ PF ZF RF ]
cs 0x10 16
ss 0x0 0
ds 0x0 0
es 0x0 0
fs 0x0 0
gs 0x0 0
fctrl 0x0 0
fstat 0x0 0
ftag 0x0 0
fiseg 0x0 0
fioff 0x0 0
foseg 0x0 0
fooff 0x0 0
fop 0x0 0
mxcsr 0x0 [ ](gdb)
...
...0xffffffff802d2208 <probe_wakeup_sched_switch+129>: lock xadd %ax,0xf2debf(%rip) # 0xffffffff812000d0 <wakeup_lock>0xffffffff802d2211 <probe_wakeup_sched_switch+138>: cmp %ah,%al0xffffffff802d2213 <probe_wakeup_sched_switch+140>: je 0xffffffff802d221f <probe_wakeup_sched_switch+152>0xffffffff802d2215 <probe_wakeup_sched_switch+142>: pause
0xffffffff802d2217 <probe_wakeup_sched_switch+144>: mov 0xf2deb3(%rip),%al # 0xffffffff812000d0 <wakeup_lock> 0xffffffff802d221d <probe_wakeup_sched_switch+150>: jmp 0xffffffff802d2211 <probe_wakeup_sched_switch+138> 0xffffffff802d221f <probe_wakeup_sched_switch+152>: cmpl $0x0,0x9fb02a(%rip) # 0xffffffff80ccd250 <tracer_enabled> 0xffffffff802d2226 <probe_wakeup_sched_switch+159>: je 0xffffffff802d22ac <probe_wakeup_sched_switch+293> 0xffffffff802d222c <probe_wakeup_sched_switch+165>: cmp 0xf2dead(%rip),%r13 # 0xffffffff812000e0 <wakeup_task> 0xffffffff802d2233 <probe_wakeup_sched_switch+172>: jne 0xffffffff802d22ac <probe_wakeup_sched_switch+293> 0xffffffff802d2235 <probe_wakeup_sched_switch+174>: movslq 0xf2deac(%rip),%rax # 0xffffffff812000e8 <wakeup_cpu> 0xffffffff802d223c <probe_wakeup_sched_switch+181>: mov 0x0(%rbp),%rcx 0xffffffff802d2240 <probe_wakeup_sched_switch+185>: mov %r14d,%r8d 0xffffffff802d2243 <probe_wakeup_sched_switch+188>: mov 0xf2de8e(%rip),%rdi # 0xffffffff812000d8 <wakeup_trace> 0xffffffff802d224a <probe_wakeup_sched_switch+195>: mov 0x8(%rcx),%rsi 0xffffffff802d224e <probe_wakeup_sched_switch+199>: mov 0x28(%rdi,%rax,8),%rbx 0xffffffff802d2253 <probe_wakeup_sched_switch+204>: mov (%rcx),%rax 0xffffffff802d2256 <probe_wakeup_sched_switch+207>: mov %r12,%rcx 0xffffffff802d2259 <probe_wakeup_sched_switch+210>: mov 0x8(%rax),%rdx <<<<<<<<<===================== Here. 0xffffffff802d225d <probe_wakeup_sched_switch+214>: callq 0xffffffff802cc258 <trace_function> 0xffffffff802d2262 <probe_wakeup_sched_switch+219>: mov 0xf2de6f(%rip),%rdi # 0xffffffff812000d8 <wakeup_trace> 0xffffffff802d2269 <probe_wakeup_sched_switch+226>: mov -0x30(%rbp),%rsi 0xffffffff802d226d <probe_wakeup_sched_switch+230>: mov %r14d,%r8d 0xffffffff802d2270 <probe_wakeup_sched_switch+233>: mov %r13,%rdx 0xffffffff802d2273 <probe_wakeup_sched_switch+236>: mov %r12,%rcx 0xffffffff802d2276 <probe_wakeup_sched_switch+239>: callq 0xffffffff802cd5b---Type <return> to continue, or q <return> to quit---
2 <tracing_sched_switch_trace>
Some stack from rbp
crash> rd 0xffff8801d05c7ed0 50
ffff8801d05c7ed0: ffff8801d05c7f70 ffffffff806f8264 p.\.....d.o..... ffff8801d05c7ee0: 0000000000000002 ffff8801d05c7f48 ........H.\..... ffff8801d05c7ef0: ffff8801d043d040 ffff88022f21d820 @.C..... .!/.... ffff8801d05c7f00: ffff8801d043d3e8 0000000300000000 ..C............. ffff8801d05c7f10: 00007fff656c34d0 0000000000000000 .4le............ ffff8801d05c7f20: 0000000000000000 0000000000000000 ................ ffff8801d05c7f30: ffffffff806fb61b 00000000000cf7bd ..o............. ffff8801d05c7f40: 0000000000000857 00000000008c3fc0 W........?...... ffff8801d05c7f50: 0000000000000000 00007fff656c34d0 .........4le.... ffff8801d05c7f60: 0000000000000000 0000000000000000 ................ ffff8801d05c7f70: 0000000000000000 ffffffff8020d56d ........m. ..... ffff8801d05c7f80: 000000000000fe2e 0000000000000202 ................ ffff8801d05c7f90: 0000003b4b151a30 0000000000000003 0..K;........... ffff8801d05c7fa0: 0000000000000004 00000000008c3fc0 .........?...... ffff8801d05c7fb0: 00000000008c30b0 0000000000000000 .0.............. ffff8801d05c7fc0: 00007f8e5a102de8 0000000000000000 .-.Z............ ffff8801d05c7fd0: ffffffffffffffff 00000000004533f6 .........3E..... ffff8801d05c7fe0: 0000000000000033 0000000000010206 3............... ffff8801d05c7ff0: 00007fff656c3270 000000000000002b p2le....+....... ffff8801d05c8000: 0000000000000000 0000000000000000 ................
and some relvant text addresses
crash> sym ffffffff806f8264ffffffff806f8264 (T) schedule+3481 include/trace/sched_event_types.h: 149 crash> sym ffffffff8020d56dffffffff8020d56d (t) retint_careful+18 include/linux/kdev_t.h: 52 crash> sym ffffffff806fb61bffffffff806fb61b (T) trace_hardirqs_on_thunk+58 include/linux/hrtimer.h: 199 crash> sym ffff880028167d40
It seems CALLER_ADDR is not correct?
Thanks
Maneesh
Signature · 4 lines
Maneesh Soni Linux Technology Center IBM India Systems and Technology Lab, Bangalore, India.
Steven Rostedt
maintainerRe: [PATCH][GIT PULL] tracing/wakeup: move access to wakeup_cpu into spinlock
Quoted 41 lines · Maneesh Soni
Quoted 38 lines
Hi Steven,
I still the oops with the patch,
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac PGD 1d68e9067 PUD 1e6cdf067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:0c/0000:0c:00.0/irq CPU 5 Modules linked in: autofs4 hidp rfcomm l2cap bluetooth iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport sg sr_mod ide_cd_mod cdrom serio_raw acpi_memhotplug button tg3 libphy i2c_piix4 i2c_core pcspkr usb_storage uhci_hcd ohci_hcd ehci_hcd aacraid sd_mod scsi_mod ext3 jbd Pid: 6095, comm: cat Not tainted 2.6.29-tip-test #2 eserver xSeries 366-[88632RA]- RIP: 0010:[<ffffffff802d2259>] [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac RSP: 0000:ffff8801e6d03ea0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8800281989a0 RCX: 0000000000000046 RDX: ffff8800281989a0 RSI: ffffffff8020d56d RDI: ffffffff811de480 RBP: ffff8801e6d03ed0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000046 R13: ffff88022f232820 R14: 0000000000000000 R15: 0000000000000005 FS: 00007f98b94cb6e0(0000) GS:ffff88002818b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 0000000224595000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cat (pid: 6095, threadinfo ffff8801e6d02000, task ffff8801d6935040) Stack: ffff8801d6935040 ffff880224981230 ffff88002819dd40 0000003b4ae00aa0 00007fffc14df830 ffff88002819dd40 ffff8801e6d03f70 ffffffff806f8264 0000000000000002 ffff8801e6d03f48 ffff8801d6935040 ffff88022f232820 Call Trace: [<ffffffff806f8264>] schedule+0xd99/0x10f9 [<ffffffff806fb61b>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8027d2cb>] ? delayed_work_timer_fn+0x0/0x38 [<ffffffff8020d56d>] retint_careful+0x12/0x2e Code: 2d ad de f2 00 75 77 48 63 05 ac de f2 00 48 8b 4d 00 45 89 f0 48 8b 3d 8e de f2 00 48 8b 71 08 48 8b 5c c7 28 48 8b 01 4c 89 e1 <48> 8b 50 08 e8 f6 9f ff ff 48 8b 3d 6f de f2 00 48 8b 75 d0 45 RIP [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac RSP <ffff8801e6d03ea0>Quoted 2 lines
CR2: 0000000000000008
Quoted 4 lines
I could get a kdump in my next attempt. Let me know if you want me to upload the dump somewhere. (700 MB compressed)
Some info from the dump using gdb & crash-utility.
Thanks, this is indeed helpful.
Quoted 89 lines
(gdb) bt full
#00xffffffff802d2259inprobe_wakeup_sched_switch(rq=<value optimized out>,prev=Cannot access memory at address 0xffff8801d05c7ea0 ) at kernel/trace/trace_sched_wakeup.c:157 data = (struct trace_array_cpu *) 0xffff8800281629a0 T0 = <value optimized out> T1 = <value optimized out> delta = <value optimized out> flags = 70 pc = 0Cannot access memory at address
0xffff8801d05c7ed8
(gdb) printwakeup_trace
$7 = (structtrace_array*)0xffffffff811de480
(gdb) print *(structtrace_array*)0xffffffff811de480
$8 = {buffer =0xffff88022f090440, entries = 1441792, cpu = 0,
time_start= 437360893965, waiter =0x0, data = {0xffff8800281119a0,0xffff88002812c9a0, 0xffff8800281479a0, 0xffff8800281629a0, 0xffff88002817d9a0, 0xffff8800281989a0, 0xffff8800281b39a0, 0xffff8800281ce9a0, 0x0 <repeats 247 times>}}(gdb) print
tracer_enabled
$9 = 1
(gdb) printwakeup_cpu
$10 = 3
(gdb) info threads
8 process 00xffffffff80217024inmwait_idle()at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 7 process 0 0xffffffff80217024 in mwait_idle () at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 6 process 0 0xffffffff80217024 in mwait_idle () at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 5 process 0 0xffffffff80217024 in mwait_idle () at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 * 4 process 5773 0xffffffff802d2259 in probe_wakeup_sched_switch ( rq=<value optimized out>, prev=Cannot access memory at address 0xffff8801d05c7ea0 ) at kernel/trace/trace_sched_wakeup.c:157 3 process 0 0xffffffff80217024 in mwait_idle () at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 2 process 0 0xffffffff80217024 in mwait_idle () at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 1 process 0 0xffffffff80217024 in mwait_idle () at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 (gdb) info registers rax 0x0 0 rbx 0xffff8800281629a0 -131940722792032 rcx 0x46 70 rdx 0xffff8800281629a0 -131940722792032 rsi 0xffffffff8020d56d -2145331859 rdi 0xffffffff811de480 -2128747392 rbp 0xffff8801d05c7ed0 0xffff8801d05c7ed0 rsp 0xffff8801d05c7ea0 0xffff8801d05c7ea0 r8 0x0 0 r9 0x0 0 r10 0xffff8801d05c7eb0 -131933604643152 r11 0x1 1 r12 0x46 70 r13 0xffff88022f21d820 -131932014651360 r14 0x0 0 r15 0x3 3 rip 0xffffffff802d2259 0xffffffff802d2259 <probe_wakeup_sched_switch+210> eflags 0x10046 [ PF ZF RF ] cs 0x10 16 ss 0x0 0 ds 0x0 0 es 0x0 0 fs 0x0 0 gs 0x0 0 fctrl 0x0 0 fstat 0x0 0 ftag 0x0 0 fiseg 0x0 0 fioff 0x0 0 foseg 0x0 0 fooff 0x0 0 fop 0x0 0 mxcsr 0x0 [ ](gdb)
...
...0xffffffff802d2208<probe_wakeup_sched_switch+129>: lock xadd %ax,0xf2debf(%rip) #0xffffffff812000d0<wakeup_lock>0xffffffff802d2211<probe_wakeup_sched_switch+138>: cmp %ah,%al0xffffffff802d2213<probe_wakeup_sched_switch+140>: je0xffffffff802d221f<probe_wakeup_sched_switch+152>0xffffffff802d2215<probe_wakeup_sched_switch+142>: pause0xffffffff802d2217 <probe_wakeup_sched_switch+144>: mov 0xf2deb3(%rip),%al # 0xffffffff812000d0 <wakeup_lock> 0xffffffff802d221d <probe_wakeup_sched_switch+150>: jmp 0xffffffff802d2211 <probe_wakeup_sched_switch+138> 0xffffffff802d221f <probe_wakeup_sched_switch+152>: cmpl $0x0,0x9fb02a(%rip) # 0xffffffff80ccd250 <tracer_enabled> 0xffffffff802d2226 <probe_wakeup_sched_switch+159>: je 0xffffffff802d22ac <probe_wakeup_sched_switch+293> 0xffffffff802d222c <probe_wakeup_sched_switch+165>: cmp 0xf2dead(%rip),%r13 # 0xffffffff812000e0 <wakeup_task> 0xffffffff802d2233 <probe_wakeup_sched_switch+172>: jne 0xffffffff802d22ac <probe_wakeup_sched_switch+293>
Quoted 3 lines
0xffffffff802d2235<probe_wakeup_sched_switch+174>: movslq 0xf2deac(%rip),%rax #0xffffffff812000e8<wakeup_cpu>
0xffffffff802d223c<probe_wakeup_sched_switch+181>: mov 0x0(%rbp),%rcx
Here we load the frame pointer into %rcx.
Quoted 4 lines
0xffffffff802d2240<probe_wakeup_sched_switch+185>: mov %r14d,%r8d0xffffffff802d2243<probe_wakeup_sched_switch+188>: mov 0xf2de8e(%rip),%rdi #0xffffffff812000d8<wakeup_trace>
0xffffffff802d224a<probe_wakeup_sched_switch+195>: mov 0x8(%rcx),%rsi
CALLER_ADDR1 gets loaded into %rsi
Quoted 4 lines
0xffffffff802d224e<probe_wakeup_sched_switch+199>: mov 0x28(%rdi,%rax,8),%rbx
0xffffffff802d2253<probe_wakeup_sched_switch+204>: mov (%rcx),%rax
We move what should be the caller of the next frame into %rax but this ends up being NULL?
Quoted 2 lines
0xffffffff802d2256<probe_wakeup_sched_switch+207>: mov %r12,%rcx0xffffffff802d2259<probe_wakeup_sched_switch+210>: mov 0x8(%rax),%rdx <<<<<<<<<===================== Here.
Hence, we crash.
This is really strange. CALLER_ADDR* are internal gcc __builtin_return_address(*) functions.
Do you have CONFIG_FRAME_POINTER set?
Is this running in a virtual box or bare metal? (probably should not matter)
What version of gcc do you have?
Hmm, looking back at the call stack:
Quoted 4 lines
Quoted 4 lines
[<ffffffff806f8264>] schedule+0xd99/0x10f9 [<ffffffff806fb61b>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8027d2cb>] ? delayed_work_timer_fn+0x0/0x38 [<ffffffff8020d56d>] retint_careful+0x12/0x2e
I wonder if we do not set up a stack frame properly. retint_careful is called by assembly. I'll have a look at that.
Thanks,
-- Steve
Quoted 55 lines
0xffffffff802d225d <probe_wakeup_sched_switch+214>: callq 0xffffffff802cc258 <trace_function> 0xffffffff802d2262 <probe_wakeup_sched_switch+219>: mov 0xf2de6f(%rip),%rdi # 0xffffffff812000d8 <wakeup_trace> 0xffffffff802d2269 <probe_wakeup_sched_switch+226>: mov -0x30(%rbp),%rsi 0xffffffff802d226d <probe_wakeup_sched_switch+230>: mov %r14d,%r8d 0xffffffff802d2270 <probe_wakeup_sched_switch+233>: mov %r13,%rdx 0xffffffff802d2273 <probe_wakeup_sched_switch+236>: mov %r12,%rcx 0xffffffff802d2276 <probe_wakeup_sched_switch+239>: callq 0xffffffff802cd5b---Type <return> to continue, or q <return> to quit---2 <
tracing_sched_switch_trace>Some stack from rbp
crash> rd
0xffff8801d05c7ed050ffff8801d05c7ed0: ffff8801d05c7f70 ffffffff806f8264 p.\.....d.o..... ffff8801d05c7ee0: 0000000000000002 ffff8801d05c7f48 ........H.\..... ffff8801d05c7ef0: ffff8801d043d040 ffff88022f21d820 @.C..... .!/.... ffff8801d05c7f00: ffff8801d043d3e8 0000000300000000 ..C............. ffff8801d05c7f10: 00007fff656c34d0 0000000000000000 .4le............ ffff8801d05c7f20: 0000000000000000 0000000000000000 ................ ffff8801d05c7f30: ffffffff806fb61b 00000000000cf7bd ..o............. ffff8801d05c7f40: 0000000000000857 00000000008c3fc0 W........?...... ffff8801d05c7f50: 0000000000000000 00007fff656c34d0 .........4le.... ffff8801d05c7f60: 0000000000000000 0000000000000000 ................ ffff8801d05c7f70: 0000000000000000 ffffffff8020d56d ........m. ..... ffff8801d05c7f80: 000000000000fe2e 0000000000000202 ................ ffff8801d05c7f90: 0000003b4b151a30 0000000000000003 0..K;........... ffff8801d05c7fa0: 0000000000000004 00000000008c3fc0 .........?...... ffff8801d05c7fb0: 00000000008c30b0 0000000000000000 .0.............. ffff8801d05c7fc0: 00007f8e5a102de8 0000000000000000 .-.Z............ ffff8801d05c7fd0: ffffffffffffffff 00000000004533f6 .........3E..... ffff8801d05c7fe0: 0000000000000033 0000000000010206 3............... ffff8801d05c7ff0: 00007fff656c3270 000000000000002b p2le....+....... ffff8801d05c8000: 0000000000000000 0000000000000000 ................and some relvant text addresses
crash> symffffffff806f8264ffffffff806f8264(T) schedule+3481include/trace/sched_event_types.h: 149 crash> symffffffff8020d56dffffffff8020d56d(t) retint_careful+18include/linux/kdev_t.h: 52 crash> symffffffff806fb61bffffffff806fb61b(T) trace_hardirqs_on_thunk+58include/linux/hrtimer.h: 199 crash> symffff880028167d40It seems
CALLER_ADDRis not correct?Thanks
ManeeshSignature · 4 lines
Maneesh Soni Linux Technology Center IBM India Systems and Technology Lab, Bangalore, India.
Re: [PATCH][GIT PULL] tracing/wakeup: move access to wakeup_cpu into spinlock
Quoted 7 lines · Steven Rostedt
Quoted 5 lines · Maneesh Soni
Quoted 5 lines
Hi Steven,
I still the oops with the patch,
Quoted 13 lines
Quoted 5 lines
Quoted 5 lines
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac PGD 1d68e9067 PUD 1e6cdf067 PMD 0 Oops: 0000 [#1] SMPlast sysfs file: /sys/devices/pci0000:0c/0000:0c:00.0/irq
Quoted 8 lines
Quoted 8 lines
CPU 5
Modules linked in: autofs4 hidp rfcomm l2cap bluetooth iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport sg sr_mod ide_cd_mod cdrom serio_raw acpi_memhotplug button tg3 libphy i2c_piix4 i2c_core pcspkr usb_storage uhci_hcd ohci_hcd ehci_hcd aacraid sd_mod scsi_mod ext3 jbd Pid: 6095, comm: cat Not tainted 2.6.29-tip-test #2 eserver xSeries 366-[88632RA]- RIP: 0010:[<ffffffff802d2259>] [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac RSP: 0000:ffff8801e6d03ea0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8800281989a0 RCX: 0000000000000046 RDX: ffff8800281989a0 RSI: ffffffff8020d56d RDI: ffffffff811de480 RBP: ffff8801e6d03ed0 R08: 0000000000000000 R09: 0000000000000000
RBP is very close to RSP, so it's very likely that FRAME_POINTER is enabled.
Quoted 156 lines
Quoted 23 lines
Quoted 20 lines
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000046 R13: ffff88022f232820 R14: 0000000000000000 R15: 0000000000000005 FS: 00007f98b94cb6e0(0000) GS:ffff88002818b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 0000000224595000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cat (pid: 6095, threadinfo ffff8801e6d02000, task ffff8801d6935040) Stack: ffff8801d6935040 ffff880224981230 ffff88002819dd40 0000003b4ae00aa0 00007fffc14df830 ffff88002819dd40 ffff8801e6d03f70 ffffffff806f8264 0000000000000002 ffff8801e6d03f48 ffff8801d6935040 ffff88022f232820 Call Trace: [<ffffffff806f8264>] schedule+0xd99/0x10f9 [<ffffffff806fb61b>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8027d2cb>] ? delayed_work_timer_fn+0x0/0x38 [<ffffffff8020d56d>] retint_careful+0x12/0x2e Code: 2d ad de f2 00 75 77 48 63 05 ac de f2 00 48 8b 4d 00 45 89 f0 48 8b 3d 8e de f2 00 48 8b 71 08 48 8b 5c c7 28 48 8b 01 4c 89 e1 <48> 8b 50 08 e8 f6 9f ff ff 48 8b 3d 6f de f2 00 48 8b 75 d0 45 RIP [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac RSP <ffff8801e6d03ea0>Quoted 2 lines
CR2: 0000000000000008
Quoted 4 lines
I could get a kdump in my next attempt. Let me know if you want me to upload the dump somewhere. (700 MB compressed)
Some info from the dump using gdb & crash-utility.
Thanks, this is indeed helpful.
Quoted 89 lines
(gdb) bt full
#00xffffffff802d2259inprobe_wakeup_sched_switch(rq=<value optimized out>,prev=Cannot access memory at address 0xffff8801d05c7ea0 ) at kernel/trace/trace_sched_wakeup.c:157 data = (struct trace_array_cpu *) 0xffff8800281629a0 T0 = <value optimized out> T1 = <value optimized out> delta = <value optimized out> flags = 70 pc = 0Cannot access memory at address
0xffff8801d05c7ed8
(gdb) printwakeup_trace
$7 = (structtrace_array*)0xffffffff811de480
(gdb) print *(structtrace_array*)0xffffffff811de480
$8 = {buffer =0xffff88022f090440, entries = 1441792, cpu = 0,
time_start= 437360893965, waiter =0x0, data = {0xffff8800281119a0,0xffff88002812c9a0, 0xffff8800281479a0, 0xffff8800281629a0, 0xffff88002817d9a0, 0xffff8800281989a0, 0xffff8800281b39a0, 0xffff8800281ce9a0, 0x0 <repeats 247 times>}}(gdb) print
tracer_enabled
$9 = 1
(gdb) printwakeup_cpu
$10 = 3
(gdb) info threads
8 process 00xffffffff80217024inmwait_idle()at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 7 process 0 0xffffffff80217024 in mwait_idle () at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 6 process 0 0xffffffff80217024 in mwait_idle () at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 5 process 0 0xffffffff80217024 in mwait_idle () at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 * 4 process 5773 0xffffffff802d2259 in probe_wakeup_sched_switch ( rq=<value optimized out>, prev=Cannot access memory at address 0xffff8801d05c7ea0 ) at kernel/trace/trace_sched_wakeup.c:157 3 process 0 0xffffffff80217024 in mwait_idle () at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 2 process 0 0xffffffff80217024 in mwait_idle () at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 1 process 0 0xffffffff80217024 in mwait_idle () at /home/maneesh/linux-2.6-tip/arch/x86/include/asm/processor.h:732 (gdb) info registers rax 0x0 0 rbx 0xffff8800281629a0 -131940722792032 rcx 0x46 70 rdx 0xffff8800281629a0 -131940722792032 rsi 0xffffffff8020d56d -2145331859 rdi 0xffffffff811de480 -2128747392 rbp 0xffff8801d05c7ed0 0xffff8801d05c7ed0 rsp 0xffff8801d05c7ea0 0xffff8801d05c7ea0 r8 0x0 0 r9 0x0 0 r10 0xffff8801d05c7eb0 -131933604643152 r11 0x1 1 r12 0x46 70 r13 0xffff88022f21d820 -131932014651360 r14 0x0 0 r15 0x3 3 rip 0xffffffff802d2259 0xffffffff802d2259 <probe_wakeup_sched_switch+210> eflags 0x10046 [ PF ZF RF ] cs 0x10 16 ss 0x0 0 ds 0x0 0 es 0x0 0 fs 0x0 0 gs 0x0 0 fctrl 0x0 0 fstat 0x0 0 ftag 0x0 0 fiseg 0x0 0 fioff 0x0 0 foseg 0x0 0 fooff 0x0 0 fop 0x0 0 mxcsr 0x0 [ ](gdb)
...
...0xffffffff802d2208<probe_wakeup_sched_switch+129>: lock xadd %ax,0xf2debf(%rip) #0xffffffff812000d0<wakeup_lock>0xffffffff802d2211<probe_wakeup_sched_switch+138>: cmp %ah,%al0xffffffff802d2213<probe_wakeup_sched_switch+140>: je0xffffffff802d221f<probe_wakeup_sched_switch+152>0xffffffff802d2215<probe_wakeup_sched_switch+142>: pause0xffffffff802d2217 <probe_wakeup_sched_switch+144>: mov 0xf2deb3(%rip),%al # 0xffffffff812000d0 <wakeup_lock> 0xffffffff802d221d <probe_wakeup_sched_switch+150>: jmp 0xffffffff802d2211 <probe_wakeup_sched_switch+138> 0xffffffff802d221f <probe_wakeup_sched_switch+152>: cmpl $0x0,0x9fb02a(%rip) # 0xffffffff80ccd250 <tracer_enabled> 0xffffffff802d2226 <probe_wakeup_sched_switch+159>: je 0xffffffff802d22ac <probe_wakeup_sched_switch+293> 0xffffffff802d222c <probe_wakeup_sched_switch+165>: cmp 0xf2dead(%rip),%r13 # 0xffffffff812000e0 <wakeup_task> 0xffffffff802d2233 <probe_wakeup_sched_switch+172>: jne 0xffffffff802d22ac <probe_wakeup_sched_switch+293>Quoted 3 lines
0xffffffff802d2235<probe_wakeup_sched_switch+174>: movslq 0xf2deac(%rip),%rax #0xffffffff812000e8<wakeup_cpu>
0xffffffff802d223c<probe_wakeup_sched_switch+181>: mov 0x0(%rbp),%rcxHere we load the frame pointer into %rcx.
Quoted 4 lines
0xffffffff802d2240<probe_wakeup_sched_switch+185>: mov %r14d,%r8d0xffffffff802d2243<probe_wakeup_sched_switch+188>: mov 0xf2de8e(%rip),%rdi #0xffffffff812000d8<wakeup_trace>
0xffffffff802d224a<probe_wakeup_sched_switch+195>: mov 0x8(%rcx),%rsi
CALLER_ADDR1gets loaded into %rsiQuoted 4 lines
0xffffffff802d224e<probe_wakeup_sched_switch+199>: mov 0x28(%rdi,%rax,8),%rbx
0xffffffff802d2253<probe_wakeup_sched_switch+204>: mov (%rcx),%raxWe move what should be the caller of the next frame into %rax but this ends up being NULL?
Quoted 2 lines
0xffffffff802d2256<probe_wakeup_sched_switch+207>: mov %r12,%rcx0xffffffff802d2259<probe_wakeup_sched_switch+210>: mov 0x8(%rax),%rdx <<<<<<<<<===================== Here.Hence, we crash.
This is really strange. CALLER_ADDR* are internal gcc
__builtin_return_address(*)functions.Do you have
CONFIG_FRAME_POINTERset?Is this running in a virtual box or bare metal? (probably should not matter)
What version of gcc do you have?
Hmm, looking back at the call stack:
Quoted 7 lines
Quoted 4 lines
Quoted 4 lines
[<ffffffff806f8264>] schedule+0xd99/0x10f9 [<ffffffff806fb61b>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8027d2cb>] ? delayed_work_timer_fn+0x0/0x38 [<ffffffff8020d56d>] retint_careful+0x12/0x2eI wonder if we do not set up a stack frame properly.
retint_carefulis called by assembly. I'll have a look at that
Aah, indeed.
May be should probe_kernel_address before saving
the addresses.
Frederic.
.
Quoted 63 lines
Thanks,
-- Steve
Quoted 55 lines
0xffffffff802d225d <probe_wakeup_sched_switch+214>: callq 0xffffffff802cc258 <trace_function> 0xffffffff802d2262 <probe_wakeup_sched_switch+219>: mov 0xf2de6f(%rip),%rdi # 0xffffffff812000d8 <wakeup_trace> 0xffffffff802d2269 <probe_wakeup_sched_switch+226>: mov -0x30(%rbp),%rsi 0xffffffff802d226d <probe_wakeup_sched_switch+230>: mov %r14d,%r8d 0xffffffff802d2270 <probe_wakeup_sched_switch+233>: mov %r13,%rdx 0xffffffff802d2273 <probe_wakeup_sched_switch+236>: mov %r12,%rcx 0xffffffff802d2276 <probe_wakeup_sched_switch+239>: callq 0xffffffff802cd5b---Type <return> to continue, or q <return> to quit---2 <
tracing_sched_switch_trace>Some stack from rbp
crash> rd
0xffff8801d05c7ed050ffff8801d05c7ed0: ffff8801d05c7f70 ffffffff806f8264 p.\.....d.o..... ffff8801d05c7ee0: 0000000000000002 ffff8801d05c7f48 ........H.\..... ffff8801d05c7ef0: ffff8801d043d040 ffff88022f21d820 @.C..... .!/.... ffff8801d05c7f00: ffff8801d043d3e8 0000000300000000 ..C............. ffff8801d05c7f10: 00007fff656c34d0 0000000000000000 .4le............ ffff8801d05c7f20: 0000000000000000 0000000000000000 ................ ffff8801d05c7f30: ffffffff806fb61b 00000000000cf7bd ..o............. ffff8801d05c7f40: 0000000000000857 00000000008c3fc0 W........?...... ffff8801d05c7f50: 0000000000000000 00007fff656c34d0 .........4le.... ffff8801d05c7f60: 0000000000000000 0000000000000000 ................ ffff8801d05c7f70: 0000000000000000 ffffffff8020d56d ........m. ..... ffff8801d05c7f80: 000000000000fe2e 0000000000000202 ................ ffff8801d05c7f90: 0000003b4b151a30 0000000000000003 0..K;........... ffff8801d05c7fa0: 0000000000000004 00000000008c3fc0 .........?...... ffff8801d05c7fb0: 00000000008c30b0 0000000000000000 .0.............. ffff8801d05c7fc0: 00007f8e5a102de8 0000000000000000 .-.Z............ ffff8801d05c7fd0: ffffffffffffffff 00000000004533f6 .........3E..... ffff8801d05c7fe0: 0000000000000033 0000000000010206 3............... ffff8801d05c7ff0: 00007fff656c3270 000000000000002b p2le....+....... ffff8801d05c8000: 0000000000000000 0000000000000000 ................and some relvant text addresses
crash> symffffffff806f8264ffffffff806f8264(T) schedule+3481include/trace/sched_event_types.h: 149 crash> symffffffff8020d56dffffffff8020d56d(t) retint_careful+18include/linux/kdev_t.h: 52 crash> symffffffff806fb61bffffffff806fb61b(T) trace_hardirqs_on_thunk+58include/linux/hrtimer.h: 199 crash> symffff880028167d40It seems
CALLER_ADDRis not correct?Thanks
ManeeshSignature · 4 lines
Maneesh Soni Linux Technology Center IBM India Systems and Technology Lab, Bangalore, India.
Steven Rostedt
maintainerRe: [PATCH][GIT PULL] tracing/wakeup: move access to wakeup_cpu into spinlock
Quoted 8 lines · Frederic Weisbecker
Quoted 8 lines
Hmm, looking back at the call stack:
Quoted 4 lines
Quoted 4 lines
[<ffffffff806f8264>] schedule+0xd99/0x10f9 [<ffffffff806fb61b>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8027d2cb>] ? delayed_work_timer_fn+0x0/0x38 [<ffffffff8020d56d>] retint_careful+0x12/0x2e
Quoted 8 lines
Quoted 2 lines
I wonder if we do not set up a stack frame properly.
retint_carefulis called by assembly. I'll have a look at thatAah, indeed.
May be shouldprobe_kernel_addressbefore saving
the addresses.
Looking at the retint_careful, I'm 90% sure that is the bug.
Unfortunately, the CALLER_ADDR2 is a built in gcc function.
Looks like only the wakeup latency tracer calls it, perhaps we should simply pass 0 instead?
-- Steve
Re: [PATCH][GIT PULL] tracing/wakeup: move access to wakeup_cpu into spinlock
In reply to Steven RostedtOn Fri, Mar 27, 2009 at 09:15:29AM -0400, Steven Rostedt wrote:
...
Quoted 2 lines
Do you have
CONFIG_FRAME_POINTERset?
Yes, CONFIG_FRAME_POINTER=y
Quoted 2 lines
Is this running in a virtual box or bare metal? (probably should not matter)
Bare metal.
Quoted 2 lines
What version of gcc do you have?
gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-44)
Thanks
Maneesh
Signature · 4 lines
Maneesh Soni Linux Technology Center IBM India Systems and Technology Lab, Bangalore, India.
Steven Rostedt
maintainerRe: [PATCH][GIT PULL] tracing/wakeup: move access to wakeup_cpu into spinlock
In reply to Maneesh SoniQuoted 67 lines · Maneesh Soni
Quoted 37 lines
Hi Steven,
I still the oops with the patch,
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac PGD 1d68e9067 PUD 1e6cdf067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:0c/0000:0c:00.0/irq CPU 5 Modules linked in: autofs4 hidp rfcomm l2cap bluetooth iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport sg sr_mod ide_cd_mod cdrom serio_raw acpi_memhotplug button tg3 libphy i2c_piix4 i2c_core pcspkr usb_storage uhci_hcd ohci_hcd ehci_hcd aacraid sd_mod scsi_mod ext3 jbd Pid: 6095, comm: cat Not tainted 2.6.29-tip-test #2 eserver xSeries 366-[88632RA]- RIP: 0010:[<ffffffff802d2259>] [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac RSP: 0000:ffff8801e6d03ea0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8800281989a0 RCX: 0000000000000046 RDX: ffff8800281989a0 RSI: ffffffff8020d56d RDI: ffffffff811de480 RBP: ffff8801e6d03ed0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000046 R13: ffff88022f232820 R14: 0000000000000000 R15: 0000000000000005 FS: 00007f98b94cb6e0(0000) GS:ffff88002818b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 0000000224595000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cat (pid: 6095, threadinfo ffff8801e6d02000, task ffff8801d6935040) Stack: ffff8801d6935040 ffff880224981230 ffff88002819dd40 0000003b4ae00aa0 00007fffc14df830 ffff88002819dd40 ffff8801e6d03f70 ffffffff806f8264 0000000000000002 ffff8801e6d03f48 ffff8801d6935040 ffff88022f232820 Call Trace: [<ffffffff806f8264>] schedule+0xd99/0x10f9 [<ffffffff806fb61b>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff8027d2cb>] ? delayed_work_timer_fn+0x0/0x38 [<ffffffff8020d56d>] retint_careful+0x12/0x2e Code: 2d ad de f2 00 75 77 48 63 05 ac de f2 00 48 8b 4d 00 45 89 f0 48 8b 3d 8e de f2 00 48 8b 71 08 48 8b 5c c7 28 48 8b 01 4c 89 e1 <48> 8b 50 08 e8 f6 9f ff ff 48 8b 3d 6f de f2 00 48 8b 75 d0 45 RIP [<ffffffff802d2259>] probe_wakeup_sched_switch+0xd2/0x1ac RSP <ffff8801e6d03ea0>Quoted 2 lines
CR2: 0000000000000008
0xffffffff802d2208<probe_wakeup_sched_switch+129>: lock xadd %ax,0xf2debf(%rip) #0xffffffff812000d0<wakeup_lock>0xffffffff802d2211<probe_wakeup_sched_switch+138>: cmp %ah,%al0xffffffff802d2213<probe_wakeup_sched_switch+140>: je0xffffffff802d221f<probe_wakeup_sched_switch+152>0xffffffff802d2215<probe_wakeup_sched_switch+142>: pause0xffffffff802d2217 <probe_wakeup_sched_switch+144>: mov 0xf2deb3(%rip),%al # 0xffffffff812000d0 <wakeup_lock> 0xffffffff802d221d <probe_wakeup_sched_switch+150>: jmp 0xffffffff802d2211 <probe_wakeup_sched_switch+138> 0xffffffff802d221f <probe_wakeup_sched_switch+152>: cmpl $0x0,0x9fb02a(%rip) # 0xffffffff80ccd250 <tracer_enabled> 0xffffffff802d2226 <probe_wakeup_sched_switch+159>: je 0xffffffff802d22ac <probe_wakeup_sched_switch+293> 0xffffffff802d222c <probe_wakeup_sched_switch+165>: cmp 0xf2dead(%rip),%r13 # 0xffffffff812000e0 <wakeup_task> 0xffffffff802d2233 <probe_wakeup_sched_switch+172>: jne 0xffffffff802d22ac <probe_wakeup_sched_switch+293> 0xffffffff802d2235 <probe_wakeup_sched_switch+174>: movslq 0xf2deac(%rip),%rax # 0xffffffff812000e8 <wakeup_cpu> 0xffffffff802d223c <probe_wakeup_sched_switch+181>: mov 0x0(%rbp),%rcx 0xffffffff802d2240 <probe_wakeup_sched_switch+185>: mov %r14d,%r8d 0xffffffff802d2243 <probe_wakeup_sched_switch+188>: mov 0xf2de8e(%rip),%rdi # 0xffffffff812000d8 <wakeup_trace> 0xffffffff802d224a <probe_wakeup_sched_switch+195>: mov 0x8(%rcx),%rsi 0xffffffff802d224e <probe_wakeup_sched_switch+199>: mov 0x28(%rdi,%rax,8),%rbx 0xffffffff802d2253 <probe_wakeup_sched_switch+204>: mov (%rcx),%rax 0xffffffff802d2256 <probe_wakeup_sched_switch+207>: mov %r12,%rcx 0xffffffff802d2259 <probe_wakeup_sched_switch+210>: mov 0x8(%rax),%rdx <<<<<<<<<===================== Here. 0xffffffff802d225d <probe_wakeup_sched_switch+214>: callq 0xffffffff802cc258 <trace_function> 0xffffffff802d2262 <probe_wakeup_sched_switch+219>: mov 0xf2de6f(%rip),%rdi # 0xffffffff812000d8 <wakeup_trace> 0xffffffff802d2269 <probe_wakeup_sched_switch+226>: mov -0x30(%rbp),%rsi 0xffffffff802d226d <probe_wakeup_sched_switch+230>: mov %r14d,%r8d 0xffffffff802d2270 <probe_wakeup_sched_switch+233>: mov %r13,%rdx 0xffffffff802d2273 <probe_wakeup_sched_switch+236>: mov %r12,%rcx 0xffffffff802d2276 <probe_wakeup_sched_switch+239>: callq 0xffffffff802cd5b---Type <return> to continue, or q <return> to quit---
Quoted 5 lines
2 <
tracing_sched_switch_trace>It seems
CALLER_ADDRis not correct?
Hi Maneesh,
Could you try this patch and see if it keeps your system from crashing?
Thanks,
-- Steve
arch/x86/kernel/entry_64.S +7 -2
@@ -917,10 +917,15 @@ retint_careful: TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) pushq %rdi - CFI_ADJUST_CFA_OFFSET 8 + pushq %rbp + call 1f +1: mov %rsp, %rbp + CFI_ADJUST_CFA_OFFSET 24 call schedule + addq $8, %rsp /* skip call */ + popq %rbp popq %rdi - CFI_ADJUST_CFA_OFFSET -8 + CFI_ADJUST_CFA_OFFSET -24 GET_THREAD_INFO(%rcx) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF
Re: [PATCH][GIT PULL] tracing/wakeup: move access to wakeup_cpu into spinlock
On Wed, Apr 01, 2009 at 07:42:58PM -0400, Steven Rostedt wrote:
....
Quoted 23 lines
Hi Maneesh,
Could you try this patch and see if it keeps your system from crashing?
Thanks,
-- Steve
arch/x86/kernel/entry_64.S +3
-1@@ -917,10 +917,15 @@ retint_careful: TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) pushq %rdi - CFI_ADJUST_CFA_OFFSET 8 + pushq %rbp + call 1f +1: mov %rsp, %rbp
arch/x86/kernel/entry_64.S retint_careful: · line 931
Quoted 10 lines
arch/x86/kernel/entry_64.S +4
-1+ CFI_ADJUST_CFA_OFFSET 24 call schedule + addq $8, %rsp /* skip call */ + popq %rbp popq %rdi - CFI_ADJUST_CFA_OFFSET -8 + CFI_ADJUST_CFA_OFFSET -24 GET_THREAD_INFO(%rcx) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF
Hi Steve
I tried the above patch but similar oops again
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff80292349>] probe_wakeup_sched_switch+0x11f/0x1e8 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:01/0000:01:01.1/irq CPU 3 Modules linked in: autofs4 hidp rfcomm l2cap bluetooth iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport sg sr_mod ide_cd_mod cdrom serio_raw acpi_memhotplug button tg3 libphy i2c_piix4 i2c_core pcspkr usb_storage uhci_hcd ohci_hcd ehci_hcd aacraid sd_mod scsi_mod ext3 jbd Pid: 16589, comm: sshd Not tainted 2.6.29-tip-test #3 eserver xSeries 366-[88632RA]- RIP: 0010:[<ffffffff80292349>] [<ffffffff80292349>] probe_wakeup_sched_switch+0x11f/0x1e8 RSP: 0018:ffff8801da1b5e90 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000046 RDX: 0000000000000000 RSI: ffffffff8020bf85 RDI: ffffffff80d6f460 RBP: ffff8801da1b5ed0 R08: 0000000000000000 R09: 0000000100000003 R10: ffff8801da1b5ed0 R11: ffff88022d152078 R12: 0000000000000046 R13: ffff88022f352040 R14: 0000000000000000 R15: 0000000000000003 FS: 00007f748364d710(0000) GS:ffff880028155000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 00000001cfd8e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: ffffffff80d91980 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Process sshd (pid: 16589, threadinfo ffff8801da1b4000, task ffff88022d152040) Stack: ffff88022d152040 ffff88022d152040 ffff880028162960 ffff880224d79810 ffff880028167d00 00007fff8b6c7190 0000000000000005 00007fff8b6c7190 ffff8801da1b5f70 ffffffff805210b7 ffff8802295b8558 0000000000000001 Call Trace: [<ffffffff805210b7>] schedule+0x82f/0xb39 [<ffffffff802d95a4>] ? sys_write+0x72/0x8d [<ffffffff8020bf85>] sysret_careful+0xd/0x10 Code: d2 48 c7 c7 38 ef 73 80 89 f3 e8 83 20 00 00 85 db 75 6f 48 8b 4d 00 48 8b 3d 54 ed af 00 45 89 f0 48 8b 01 48 8b 71 08 4c 89 e1 <48> 8b 50 08 e8 5f a1 ff ff 48 8b 3d 37 ed af 00 48 8b 75 c8 45 RIP [<ffffffff80292349>] probe_wakeup_sched_switch+0x11f/0x1e8 RSP <ffff8801da1b5e90>
CR2: 0000000000000008
<probe_wakeup_sched_switch>:
:
:
ffffffff8029195f: 75 6f jne ffffffff802919d0 <probe_wakeup_sched_switch+0x176> ffffffff80291961: 48 8b 4d 00 mov 0x0(%rbp),%rcx ffffffff80291965: 48 8b 3d 24 f7 af 00 mov 11532068(%rip),%rdi # ffffffff80d91090 <wakeup_trace> ffffffff8029196c: 45 89 f0 mov %r14d,%r8d ffffffff8029196f: 48 8b 01 mov (%rcx),%rax ffffffff80291972: 48 8b 71 08 mov 0x8(%rcx),%rsi ffffffff80291976: 4c 89 e1 mov %r12,%rcx ffffffff80291979: 48 8b 50 08 mov 0x8(%rax),%rdx ffffffff8029197d: e8 af a7 ff ff callq ffffffff8028c131 <trace_function> ffffffff80291982: 48 8b 3d 07 f7 af 00 mov 11532039(%rip),%rdi # ffffffff80d91090 <wakeup_trace> ffffffff80291989: 48 8b 75 c8 mov 0xffffffffffffffc8(%rbp),%rsi ffffffff8029198d: 45 89 f0 mov %r14d,%r8d
:
:
ffffffff8020c93c <retint_careful>:
ffffffff8020c93c: 0f ba e2 03 bt $0x3,%edx ffffffff8020c940: 73 29 jae ffffffff8020c96b <retint_signal> ffffffff8020c942: fb sti ffffffff8020c943: 57 push %rdi ffffffff8020c944: 55 push %rbp ffffffff8020c945: e8 00 00 00 00 callq ffffffff8020c94a <retint_careful+0xe> ffffffff8020c94a: 48 89 e5 mov %rsp,%rbp ffffffff8020c94d: e8 d6 34 31 00 callq ffffffff8051fe28 <schedule> ffffffff8020c952: 48 83 c4 08 add $0x8,%rsp ffffffff8020c956: 5d pop %rbp ffffffff8020c957: 5f pop %rdi ffffffff8020c958: 65 48 8b 0c 25 e8 b4 mov %gs:0xb4e8,%rcx ffffffff8020c95f: 00 00 ffffffff8020c961: 48 81 e9 d8 1f 00 00 sub $0x1fd8,%rcx ffffffff8020c968: fa cli ffffffff8020c969: eb 91 jmp ffffffff8020c8fc <retint_check>
Signature · 4 lines
Maneesh Soni Linux Technology Center IBM India Systems and Technology Lab, Bangalore, India.
Steven Rostedt
maintainerRe: [PATCH][GIT PULL] tracing/wakeup: move access to wakeup_cpu into spinlock
Quoted 42 lines · Maneesh Soni
On Wed, Apr 01, 2009 at 07:42:58PM -0400, Steven Rostedt wrote:
....
Quoted 23 lines
Hi Maneesh,
Could you try this patch and see if it keeps your system from crashing?
Thanks,
-- Steve
arch/x86/kernel/entry_64.S +3
-1@@ -917,10 +917,15 @@ retint_careful: TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) pushq %rdi - CFI_ADJUST_CFA_OFFSET 8 + pushq %rbp + call 1f +1: mov %rsp, %rbparch/x86/kernel/entry_64.S retint_careful: · line 931
Quoted 10 lines
arch/x86/kernel/entry_64.S +4
-1+ CFI_ADJUST_CFA_OFFSET 24 call schedule + addq $8, %rsp /* skip call */ + popq %rbp popq %rdi - CFI_ADJUST_CFA_OFFSET -8 + CFI_ADJUST_CFA_OFFSET -24 GET_THREAD_INFO(%rcx) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFFHi Steve
Quoted 1 line
I tried the above patch but similar oops again
Thanks, that helps a lot.
Quoted 22 lines
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff80292349>] probe_wakeup_sched_switch+0x11f/0x1e8 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:01/0000:01:01.1/irq CPU 3 Modules linked in: autofs4 hidp rfcomm l2cap bluetooth iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport sg sr_mod ide_cd_mod cdrom serio_raw acpi_memhotplug button tg3 libphy i2c_piix4 i2c_core pcspkr usb_storage uhci_hcd ohci_hcd ehci_hcd aacraid sd_mod scsi_mod ext3 jbd Pid: 16589, comm: sshd Not tainted 2.6.29-tip-test #3 eserver xSeries 366-[88632RA]- RIP: 0010:[<ffffffff80292349>] [<ffffffff80292349>] probe_wakeup_sched_switch+0x11f/0x1e8 RSP: 0018:ffff8801da1b5e90 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000046 RDX: 0000000000000000 RSI: ffffffff8020bf85 RDI: ffffffff80d6f460 RBP: ffff8801da1b5ed0 R08: 0000000000000000 R09: 0000000100000003 R10: ffff8801da1b5ed0 R11: ffff88022d152078 R12: 0000000000000046 R13: ffff88022f352040 R14: 0000000000000000 R15: 0000000000000003 FS: 00007f748364d710(0000) GS:ffff880028155000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 00000001cfd8e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: ffffffff80d91980 DR6: 00000000ffff0ff0 DR7: 0000000000000600Process sshd (pid: 16589, threadinfo
ffff8801da1b4000, taskffff88022d152040)
Quoted 8 lines
Stack: ffff88022d152040 ffff88022d152040 ffff880028162960 ffff880224d79810 ffff880028167d00 00007fff8b6c7190 0000000000000005 00007fff8b6c7190 ffff8801da1b5f70 ffffffff805210b7 ffff8802295b8558 0000000000000001 Call Trace: [<ffffffff805210b7>] schedule+0x82f/0xb39 [<ffffffff802d95a4>] ? sys_write+0x72/0x8d [<ffffffff8020bf85>] sysret_careful+0xd/0x10
This is what I was afraid of. Your other crashes were intret_careful, now we are hitting sysret_careful. I'm going to pull out all references to CALLER_ADDR2. The above patch was simply me manually putting in a call frame in intret_careful. But this is unreliable, any caller from an interrupt (or syscall) to schedule will cause an error. I'm not sure we need the CALLER_ADDR2 anyway.
Thanks!
-- Steve
Re: [PATCH][GIT PULL] tracing/wakeup: move access to wakeup_cpu into spinlock
On Thu, Apr 02, 2009 at 09:18:35AM -0400, Steven Rostedt wrote:
[..]
Quoted 32 lines
Quoted 23 lines
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff80292349>] probe_wakeup_sched_switch+0x11f/0x1e8 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:01/0000:01:01.1/irq CPU 3 Modules linked in: autofs4 hidp rfcomm l2cap bluetooth iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport sg sr_mod ide_cd_mod cdrom serio_raw acpi_memhotplug button tg3 libphy i2c_piix4 i2c_core pcspkr usb_storage uhci_hcd ohci_hcd ehci_hcd aacraid sd_mod scsi_mod ext3 jbd Pid: 16589, comm: sshd Not tainted 2.6.29-tip-test #3 eserver xSeries 366-[88632RA]- RIP: 0010:[<ffffffff80292349>] [<ffffffff80292349>] probe_wakeup_sched_switch+0x11f/0x1e8 RSP: 0018:ffff8801da1b5e90 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000046 RDX: 0000000000000000 RSI: ffffffff8020bf85 RDI: ffffffff80d6f460 RBP: ffff8801da1b5ed0 R08: 0000000000000000 R09: 0000000100000003 R10: ffff8801da1b5ed0 R11: ffff88022d152078 R12: 0000000000000046 R13: ffff88022f352040 R14: 0000000000000000 R15: 0000000000000003 FS: 00007f748364d710(0000) GS:ffff880028155000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 00000001cfd8e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: ffffffff80d91980 DR6: 00000000ffff0ff0 DR7: 0000000000000600Process sshd (pid: 16589, threadinfo
ffff8801da1b4000, taskffff88022d152040)Quoted 8 lines
Stack: ffff88022d152040 ffff88022d152040 ffff880028162960 ffff880224d79810 ffff880028167d00 00007fff8b6c7190 0000000000000005 00007fff8b6c7190 ffff8801da1b5f70 ffffffff805210b7 ffff8802295b8558 0000000000000001 Call Trace: [<ffffffff805210b7>] schedule+0x82f/0xb39 [<ffffffff802d95a4>] ? sys_write+0x72/0x8d [<ffffffff8020bf85>] sysret_careful+0xd/0x10
Quoted 7 lines
This is what I was afraid of. Your other crashes were
intret_careful, now we are hittingsysret_careful. I'm going to pull out all references toCALLER_ADDR2. The above patch was simply me manually putting in a call frame inintret_careful. But this is unreliable, any caller from an interrupt (or syscall) to schedule will cause an error. I'm not sure we need theCALLER_ADDR2anyway.
I had also tested with passing 0 instead of CALLER_ADDR2 and didn't see any crash.
Thanks
Maneesh
Signature · 4 lines
Maneesh Soni Linux Technology Center IBM India Systems and Technology Lab, Bangalore, India.