Skip to contentSkip to conversation

How to configure 36 disks ?

DISCUSSION Michael Monnerie 1 participant 1 message Mar 27, 2009

lore
Share & tools
lore
#0 lore raw

(I sent this mail on Tue 23:40 CET, but it seems it didn't arrive on the list. At least I didn't receive it. So I send again)

Quoted 2 lines · On Montag 23 März 2009 Raz wrote:

1. redundancy.
2. performance.

First, you should have bought enclosures with included RAID controllers, then you'd be finished already.

But then, I guess you wanted to save the money, but at least go get some real hardware RAID controller. Look at Areca ( http://www.areca.com.tw ) if you use Linux or Windows, the 1680 series SAS controllers can cope with SAS/SATA drives, up to 128 drives per controller. You can put a cache up to 4GB on the controller, and a battery backup module that protects your data in case of power outages. Those controllers are blazing fast, have good admin tools, send you an e-mail in case of problems, and they used it in the video that Chris mentioned:
http://blogs.sun.com/observatory/entry/don_t_shout_at_your

In the end you see they used an Areca 16port, plus an Adaptec 8port (I guess because they only had the Areca in 16port available).

Then configure a RAID-60 or whatever you like.

mfg zmi

Signature · 11 lines
// Michael Monnerie, Ing.BSc    -----      http://it-management.at
// Tel: 0660 / 415 65 31                      .network.your.ideas.
// PGP Key:         "curl -s http://zmi.at/zmi.asc | gpg --import"
// Fingerprint: AC19 F9D5 36ED CD8A EF38  500E CE14 91F7 1C12 09B4
// Keyserver: wwwkeys.eu.pgp.net                  Key-ID: 1C1209B4


_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs