Skip to contentSkip to conversation

IDE updates part 2

GIT PULL Bartlomiej Zolnierkiewicz 1 participant 2 messages Mar 27, 2009 – Mar 30, 2009

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

Hi,

More "uninteresting" IDE changes:

- make all host drivers use struct ide_port_info
- sanitize command/request completion API
- replace ide_task_t by struct ide_cmd
- improve debugging scheme (from Borislav Petkov)
- misc fixes/cleanups

Linus, please pull from:

master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/

to receive the following updates:

 arch/m68k/include/asm/ide.h |   73 -------
 drivers/ide/alim15x3.c      |    9 +-
 drivers/ide/at91_ide.c      |   70 ++++----
 drivers/ide/au1xxx-ide.c    |   39 +---
 drivers/ide/buddha.c        |   11 +-
 drivers/ide/cmd64x.c        |    6 +-
 drivers/ide/cs5536.c        |    2 +-
 drivers/ide/delkin_cb.c     |    1 +
 drivers/ide/dtc2278.c       |    3 +-
 drivers/ide/falconide.c     |   45 ++++-
 drivers/ide/gayle.c         |    7 +-
 drivers/ide/hpt366.c        |    6 +-
 drivers/ide/icside.c        |   24 +--
 drivers/ide/ide-4drives.c   |    3 +-
 drivers/ide/ide-acpi.c      |   10 +-
 drivers/ide/ide-atapi.c     |  123 +++++++-----
 drivers/ide/ide-cd.c        |  155 ++++++++-------
 drivers/ide/ide-cd.h        |    4 +-
 drivers/ide/ide-cs.c        |    1 +
 drivers/ide/ide-devsets.c   |    4 +-
 drivers/ide/ide-disk.c      |  171 ++++++++---------
 drivers/ide/ide-disk_proc.c |   28 ++--
 drivers/ide/ide-dma-sff.c   |   37 ++---
 drivers/ide/ide-dma.c       |   39 ++--
 drivers/ide/ide-eh.c        |   30 ++-
 drivers/ide/ide-floppy.c    |  156 ++++++---------
 drivers/ide/ide-gd.c        |   10 +-
 drivers/ide/ide-gd.h        |    4 +-
 drivers/ide/ide-generic.c   |    8 +-
 drivers/ide/ide-h8300.c     |   66 ++++----
 drivers/ide/ide-io-std.c    |   73 ++++----
 drivers/ide/ide-io.c        |  285 ++++++++++-----------------
 drivers/ide/ide-ioctls.c    |   44 ++--
 drivers/ide/ide-iops.c      |   66 +++----
 drivers/ide/ide-lib.c       |   20 +-
 drivers/ide/ide-park.c      |   19 +-
 drivers/ide/ide-pm.c        |   42 +++--
 drivers/ide/ide-pnp.c       |    6 +-
 drivers/ide/ide-probe.c     |   95 ++++------
 drivers/ide/ide-proc.c      |   16 +-
 drivers/ide/ide-tape.c      |  123 +++++--------
 drivers/ide/ide-taskfile.c  |  448 ++++++++++++++++++++-----------------------
 drivers/ide/ide_arm.c       |    6 +-
 drivers/ide/it821x.c        |    2 +-
 drivers/ide/macide.c        |    7 +-
 drivers/ide/ns87415.c       |   36 ++--
 drivers/ide/palm_bk3710.c   |   13 +-
 drivers/ide/pdc202xx_old.c  |    4 +-
 drivers/ide/pmac.c          |   32 +---
 drivers/ide/q40ide.c        |   15 +-
 drivers/ide/sc1200.c        |    2 +-
 drivers/ide/scc_pata.c      |  115 +++++------
 drivers/ide/setup-pci.c     |    4 +
 drivers/ide/sgiioc4.c       |   30 +--
 drivers/ide/siimage.c       |    2 +-
 drivers/ide/sl82c105.c      |    2 +-
 drivers/ide/tc86c001.c      |    2 +-
 drivers/ide/trm290.c        |   15 +-
 drivers/ide/tx4938ide.c     |   68 ++++----
 drivers/ide/tx4939ide.c     |  109 +++++------
 include/linux/ide.h         |  239 ++++++++++++-----------
 61 files changed, 1418 insertions(+), 1667 deletions(-)

Bartlomiej Zolnierkiewicz (67):
icside: use struct ide_port_info also for PCB version 5 (v2)
ide_arm: use struct ide_port_info
ide-generic: use struct ide_port_info
ide-pnp: use struct ide_port_info
buddha: use struct ide_port_info
macide: use struct ide_port_info
ide: move ->rqsize init from init_irq() to ide_init_port()
ide: remove IDE_ARCH_INTR (v2)
ide: remove IDE_ARCH_LOCK (v2)
ide: make m68k host drivers use IDE_HFLAG_MMIO
ide: cleanup <asm-m68k/ide.h>
at91_ide: use readsw()/writesw() directly
ide: include <asm/ide.h> only when needed
scc_pata: remove DECLARE_SCC_DEV() macro (v2)
ide: fix memleak on failure in probe_for_drive()
ide: fix error message in pre_task_out_intr()
ide: allow host drivers to specify IRQ flags
ide: remove now superfluous check from ide_host_register()
ide: add IDE_HFLAG_DTC2278 host flag
ide: add IDE_HFLAG_4DRIVES host flag
ide: add "flagged" taskfile flags to struct ide_taskfile (v2)
ide: complete power step in ide_complete_pm_request()
ide: factor out completion of taskfile from ide_end_drive_cmd()
ide: move request type specific code from ide_end_drive_cmd() to callers (v3)
ide: no need to read Status and Error registers for "empty" taskfile requests
ide: remove ->data_phase field from ide_hwif_t
ide: move smart_enable() call out from get_smart_data()
icside: icside_dma_setup() fixes
trm290: trm290_dma_setup() fix
au1xxx-ide: auide_dma_end() cleanup
ide: remove no longer needed PC_FLAG_TIMEDOUT packet command flag
ide-floppy: remove superfluous check from ide_floppy_end_request()
ide-tape: remove superfluous tape->lock
ide: move ->failed_pc to ide_drive_t
ide: use ->end_request only for private device driver requests ide-{floppy,tape}: cleanup ide*_end_request()
ide: remove ->end_request method
ide: return request status from ->pc_callback method
ide: use blk_fs_request() check in ide-taskfile.c
ide: call ide_build_sglist() prior to ->dma_setup (v2)
ide: remove ide_task_t typedef
ide: pass command instead of request to ide_pio_datablock()
ide: move command related fields from ide_hwif_t to struct ide_cmd
ide: set IDE_TFLAG_WRITE basing on data phase used in ide_taskfile_ioctl()
ide: use ata_tf_protocols enums
ide: merge task_{in,out}_intr()
ide: inline task_in_unexpected() into task_pio_intr()
ide: unify exit paths in task_pio_intr()
ide: task_error() -> task_error_cmd()
ide: use ide_complete_cmd() for head unload commands
ide: use ide_complete_cmd() for REQ_UNPARK_HEADS
ide: sanitize ide_finish_cmd()
ide: make ide_special_rq() BUG() on unknown requests
ide: add ide_end_rq() (v2)
ide: sanitize ide_end_rq()
ide: pass error value to ide_complete_rq()
ide: move rq->errors quirk out from ide_end_request()
ide: remove BUG() from ide_complete_rq()
ide: pass number of bytes to complete to ide_complete_rq()
ide: use ide_end_rq() in ide_complete_rq()
ide: remove ide_end_request()
ide: pass command to ide_map_sg()
ide: use do_rw_taskfile() for ATA_CMD_PACKET commands
ide: set hwif->expiry prior to calling [__]ide_set_handler()
ide: add ->dma_timer_expiry method and remove ->dma_exec_cmd one (v2)
ide: remove ide_execute_pkt_cmd() (v2)
ide: keep track of number of bytes instead of sectors in struct ide_cmd

Borislav Petkov (2):
ide: improve debugging scheme
ide-cd: use ide_drive_t's rq in cdrom_queue_request_sense

Kevin Hilman (1):
IDE: palm_bk3710: use ioremap instead of arch-specific IO_ADDRESS()

arch/m68k/include/asm/ide.h +0 -73
index b996a3c..3958726 100644
@@ -30,101 +30,28 @@
 #define _M68K_IDE_H
 
 #ifdef __KERNEL__
-
-
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#ifdef CONFIG_ATARI
-#include <linux/interrupt.h>
-#include <asm/atari_stdma.h>
-#endif
-
-#ifdef CONFIG_MAC
-#include <asm/macints.h>
-#endif
-
 /*
  * Get rid of defs from io.h - ide has its private and conflicting versions
  * Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we
  * always use the `raw' MMIO versions
  */
-#undef inb
-#undef inw
-#undef insw
-#undef inl
-#undef insl
-#undef outb
-#undef outw
-#undef outsw
-#undef outl
-#undef outsl
 #undef readb
 #undef readw
-#undef readl
 #undef writeb
 #undef writew
-#undef writel
 
-#define inb				in_8
-#define inw				in_be16
-#define insw(port, addr, n)		raw_insw((u16 *)port, addr, n)
-#define inl				in_be32
-#define insl(port, addr, n)		raw_insl((u32 *)port, addr, n)
-#define outb(val, port)			out_8(port, val)
-#define outw(val, port)			out_be16(port, val)
-#define outsw(port, addr, n)		raw_outsw((u16 *)port, addr, n)
-#define outl(val, port)			out_be32(port, val)
-#define outsl(port, addr, n)		raw_outsl((u32 *)port, addr, n)
 #define readb				in_8
 #define readw				in_be16
 #define __ide_mm_insw(port, addr, n)	raw_insw((u16 *)port, addr, n)
-#define readl				in_be32
 #define __ide_mm_insl(port, addr, n)	raw_insl((u32 *)port, addr, n)
 #define writeb(val, port)		out_8(port, val)
 #define writew(val, port)		out_be16(port, val)
 #define __ide_mm_outsw(port, addr, n)	raw_outsw((u16 *)port, addr, n)
-#define writel(val, port)		out_be32(port, val)
 #define __ide_mm_outsl(port, addr, n)	raw_outsl((u32 *)port, addr, n)
-#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
-#define insw_swapw(port, addr, n)	raw_insw_swapw((u16 *)port, addr, n)
-#define outsw_swapw(port, addr, n)	raw_outsw_swapw((u16 *)port, addr, n)
-#endif
-
-#ifdef CONFIG_BLK_DEV_FALCON_IDE
-#define IDE_ARCH_LOCK
-
-extern int falconide_intr_lock;
-
-static __inline__ void ide_release_lock (void)
-{
-	if (MACH_IS_ATARI) {
-		if (falconide_intr_lock == 0) {
-			printk("ide_release_lock: bug\n");
-			return;
-		}
-		falconide_intr_lock = 0;
-		stdma_release();
-	}
-}
-
-static __inline__ void
-ide_get_lock(irq_handler_t handler, void *data)
-{
-	if (MACH_IS_ATARI) {
-		if (falconide_intr_lock == 0) {
-			if (in_interrupt() > 0)
-				panic( "Falcon IDE hasn't ST-DMA lock in interrupt" );
-			stdma_lock(handler, data);
-			falconide_intr_lock = 1;
-		}
-	}
-}
-#endif /* CONFIG_BLK_DEV_FALCON_IDE */
-
-#define IDE_ARCH_ACK_INTR
-#define ide_ack_intr(hwif)	((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
 
 #endif /* __KERNEL__ */
 #endif /* _M68K_IDE_H */
drivers/ide/alim15x3.c +5 -4
index d3513b6..d516168 100644
@@ -191,17 +191,18 @@ static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
 /**
  *	ali15x3_dma_setup	-	begin a DMA phase
  *	@drive:	target device
+ *	@cmd: command
  *
  *	Returns 1 if the DMA cannot be performed, zero on success.
  */
 
-static int ali15x3_dma_setup(ide_drive_t *drive)
+static int ali15x3_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	if (m5229_revision < 0xC2 && drive->media != ide_disk) {
-		if (rq_data_dir(drive->hwif->rq))
+		if (cmd->tf_flags & IDE_TFLAG_WRITE)
 			return 1;	/* try PIO instead of DMA */
 	}
-	return ide_dma_setup(drive);
+	return ide_dma_setup(drive, cmd);
 }
 
 /**
@@ -503,11 +504,11 @@ static const struct ide_port_ops ali_port_ops = {
 static const struct ide_dma_ops ali_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ali15x3_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
 	.dma_start		= ide_dma_start,
 	.dma_end		= ide_dma_end,
 	.dma_test_irq		= ide_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
 	.dma_timeout		= ide_dma_timeout,
 	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
drivers/ide/at91_ide.c +35 -35

146 lines not on this page · raw message

drivers/ide/au1xxx-ide.c +9 -30
index 154ec2c..d3a9d6c 100644
@@ -86,13 +86,13 @@ void auide_outsw(unsigned long port, void *addr, u32 count)
 	ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
 }
 
-static void au1xxx_input_data(ide_drive_t *drive, struct request *rq,
+static void au1xxx_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
 			      void *buf, unsigned int len)
 {
 	auide_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
 }
 
-static void au1xxx_output_data(ide_drive_t *drive, struct request *rq,
+static void au1xxx_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
 			       void *buf, unsigned int len)
 {
 	auide_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
@@ -209,23 +209,17 @@ static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed)
  */
 
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-static int auide_build_dmatable(ide_drive_t *drive)
+static int auide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 {
-	int i, iswrite, count = 0;
 	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq = hwif->rq;
 	_auide_hwif *ahwif = &auide_hwif;
 	struct scatterlist *sg;
+	int i = cmd->sg_nents, count = 0;
+	int iswrite = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
 
-	iswrite = (rq_data_dir(rq) == WRITE);
 	/* Save for interrupt context */
 	ahwif->drive = drive;
 
-	hwif->sg_nents = i = ide_build_sglist(drive, rq);
-
-	if (!i)
-		return 0;
-
 	/* fill the descriptors */
 	sg = hwif->sg_table;
 	while (i && sg_dma_len(sg)) {
@@ -286,12 +280,7 @@ static int auide_build_dmatable(ide_drive_t *drive)
 
 static int auide_dma_end(ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
-
-	if (hwif->sg_nents) {
-		ide_destroy_dmatable(drive);
-		hwif->sg_nents = 0;
-	}
+	ide_destroy_dmatable(drive);
 
 	return 0;
 }
@@ -301,19 +290,10 @@ static void auide_dma_start(ide_drive_t *drive )
 }
 
 
-static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command)
+static int auide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
-	/* issue cmd to drive */
-	ide_execute_command(drive, command, &ide_dma_intr,
-			    (2*WAIT_CMD), NULL);
-}
-
-static int auide_dma_setup(ide_drive_t *drive)
-{
-	struct request *rq = drive->hwif->rq;
-
-	if (!auide_build_dmatable(drive)) {
-		ide_map_sg(drive, rq);
+	if (auide_build_dmatable(drive, cmd) == 0) {
+		ide_map_sg(drive, cmd);
 		return 1;
 	}
 
@@ -369,7 +349,6 @@ static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 de
 static const struct ide_dma_ops au1xxx_dma_ops = {
 	.dma_host_set		= auide_dma_host_set,
 	.dma_setup		= auide_dma_setup,
-	.dma_exec_cmd		= auide_dma_exec_cmd,
 	.dma_start		= auide_dma_start,
 	.dma_end		= auide_dma_end,
 	.dma_test_irq		= auide_dma_test_irq,
drivers/ide/buddha.c +6 -5
index c5a3c9e..d028f88 100644
@@ -143,6 +143,11 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
 	hw->chipset = ide_generic;
 }
 
+static const struct ide_port_info buddha_port_info = {
+	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
+	.irq_flags		= IRQF_SHARED,
+};
+
     /*
      *  Probe for a Buddha or Catweasel IDE interface
      */
@@ -172,10 +177,6 @@ static int __init buddha_init(void)
 		
 		board = z->resource.start;
 
-/*
- * FIXME: we now have selectable mmio v/s iomio transports.
- */
-
 		if(type != BOARD_XSURF) {
 			if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE"))
 				continue;
@@ -224,7 +225,7 @@ fail_base2:
 			hws[i] = &hw[i];
 		}
 
-		ide_host_add(NULL, hws, NULL);
+		ide_host_add(&buddha_port_info, hws, NULL);
 	}
 
 	return 0;
drivers/ide/cmd64x.c +3 -3
index aeee036..bf0e3f4 100644
@@ -379,11 +379,11 @@ static const struct ide_port_ops cmd64x_port_ops = {
 static const struct ide_dma_ops cmd64x_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
 	.dma_start		= ide_dma_start,
 	.dma_end		= cmd64x_dma_end,
 	.dma_test_irq		= cmd64x_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
 	.dma_timeout		= ide_dma_timeout,
 	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
@@ -391,11 +391,11 @@ static const struct ide_dma_ops cmd64x_dma_ops = {
 static const struct ide_dma_ops cmd646_rev1_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
 	.dma_start		= ide_dma_start,
 	.dma_end		= cmd646_1_dma_end,
 	.dma_test_irq		= ide_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
 	.dma_timeout		= ide_dma_timeout,
 	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
@@ -403,11 +403,11 @@ static const struct ide_dma_ops cmd646_rev1_dma_ops = {
 static const struct ide_dma_ops cmd648_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
 	.dma_start		= ide_dma_start,
 	.dma_end		= cmd648_dma_end,
 	.dma_test_irq		= cmd648_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
 	.dma_timeout		= ide_dma_timeout,
 	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
drivers/ide/cs5536.c +1 -1
index 7a62db7..d5dcf48 100644
@@ -231,11 +231,11 @@ static const struct ide_port_ops cs5536_port_ops = {
 static const struct ide_dma_ops cs5536_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
 	.dma_start		= cs5536_dma_start,
 	.dma_end		= cs5536_dma_end,
 	.dma_test_irq		= ide_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
 	.dma_timeout		= ide_dma_timeout,
 };
 
drivers/ide/delkin_cb.c +1 -0
index bacb119..f153b95 100644
@@ -66,6 +66,7 @@ static const struct ide_port_info delkin_cb_port_info = {
 	.port_ops		= &delkin_cb_port_ops,
 	.host_flags		= IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS |
 				  IDE_HFLAG_NO_DMA,
+	.irq_flags		= IRQF_SHARED,
 	.init_chipset		= delkin_cb_init_chipset,
 };
 
drivers/ide/dtc2278.c +2 -1
index 689b2e4..c6b1381 100644
@@ -100,7 +100,8 @@ static const struct ide_port_info dtc2278_port_info __initdata = {
 				  IDE_HFLAG_IO_32BIT |
 				  /* disallow ->io_32bit changes */
 				  IDE_HFLAG_NO_IO_32BIT |
-				  IDE_HFLAG_NO_DMA,
+				  IDE_HFLAG_NO_DMA |
+				  IDE_HFLAG_DTC2278,
 	.pio_mask		= ATA_PIO4,
 };
 
drivers/ide/falconide.c +34 -11

80 lines not on this page · raw message

drivers/ide/gayle.c +3 -4
index 59bd0be..dc77825 100644
@@ -118,7 +118,9 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
 }
 
 static const struct ide_port_info gayle_port_info = {
-	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA,
+	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
+				  IDE_HFLAG_NO_DMA,
+	.irq_flags		= IRQF_SHARED,
 };
 
     /*
@@ -163,9 +165,6 @@ found:
 	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
 	    ack_intr = gayle_ack_intr_a1200;
 	}
-/*
- * FIXME: we now have selectable modes between mmio v/s iomio
- */
 
 	res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
 	res_n = GAYLE_IDEREG_SIZE;
drivers/ide/hpt366.c +3 -3
index d3b3e82..dbaf184 100644
@@ -1418,11 +1418,11 @@ static const struct ide_port_ops hpt3xx_port_ops = {
 static const struct ide_dma_ops hpt37x_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
 	.dma_start		= ide_dma_start,
 	.dma_end		= hpt374_dma_end,
 	.dma_test_irq		= hpt374_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
 	.dma_timeout		= ide_dma_timeout,
 	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
@@ -1430,11 +1430,11 @@ static const struct ide_dma_ops hpt37x_dma_ops = {
 static const struct ide_dma_ops hpt370_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
 	.dma_start		= hpt370_dma_start,
 	.dma_end		= hpt370_dma_end,
 	.dma_test_irq		= ide_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
 	.dma_timeout		= hpt370_dma_timeout,
 	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
@@ -1442,11 +1442,11 @@ static const struct ide_dma_ops hpt370_dma_ops = {
 static const struct ide_dma_ops hpt36x_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
 	.dma_start		= ide_dma_start,
 	.dma_end		= ide_dma_end,
 	.dma_test_irq		= ide_dma_test_irq,
 	.dma_lost_irq		= hpt366_dma_lost_irq,
+	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
 	.dma_timeout		= ide_dma_timeout,
 	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
drivers/ide/icside.c +9 -15
index 415d7e2..51ce404 100644
@@ -307,15 +307,14 @@ static void icside_dma_start(ide_drive_t *drive)
 	enable_dma(ec->dma);
 }
 
-static int icside_dma_setup(ide_drive_t *drive)
+static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct expansion_card *ec = ECARD_DEV(hwif->dev);
 	struct icside_state *state = ecard_get_drvdata(ec);
-	struct request *rq = hwif->rq;
 	unsigned int dma_mode;
 
-	if (rq_data_dir(rq))
+	if (cmd->tf_flags & IDE_TFLAG_WRITE)
 		dma_mode = DMA_MODE_WRITE;
 	else
 		dma_mode = DMA_MODE_READ;
@@ -325,8 +324,6 @@ static int icside_dma_setup(ide_drive_t *drive)
 	 */
 	BUG_ON(dma_channel_active(ec->dma));
 
-	hwif->sg_nents = ide_build_sglist(drive, rq);
-
 	/*
 	 * Ensure that we have the right interrupt routed.
 	 */
@@ -346,7 +343,7 @@ static int icside_dma_setup(ide_drive_t *drive)
 	 * Tell the DMA engine about the SG table and
 	 * data direction.
 	 */
-	set_dma_sg(ec->dma, hwif->sg_table, hwif->sg_nents);
+	set_dma_sg(ec->dma, hwif->sg_table, cmd->sg_nents);
 	set_dma_mode(ec->dma, dma_mode);
 
 	drive->waiting_for_dma = 1;
@@ -354,12 +351,6 @@ static int icside_dma_setup(ide_drive_t *drive)
 	return 0;
 }
 
-static void icside_dma_exec_cmd(ide_drive_t *drive, u8 cmd)
-{
-	/* issue cmd to drive */
-	ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD, NULL);
-}
-
 static int icside_dma_test_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -383,7 +374,6 @@ static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 static const struct ide_dma_ops icside_v6_dma_ops = {
 	.dma_host_set		= icside_dma_host_set,
 	.dma_setup		= icside_dma_setup,
-	.dma_exec_cmd		= icside_dma_exec_cmd,
 	.dma_start		= icside_dma_start,
 	.dma_end		= icside_dma_end,
 	.dma_test_irq		= icside_dma_test_irq,
@@ -419,6 +409,10 @@ static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
 	hw->chipset = ide_acorn;
 }
 
+static const struct ide_port_info icside_v5_port_info = {
+	.host_flags		= IDE_HFLAG_NO_DMA,
+};
+
 static int __devinit
 icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 {
@@ -445,7 +439,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 
 	icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec);
 
-	host = ide_host_alloc(NULL, hws);
+	host = ide_host_alloc(&icside_v5_port_info, hws);
 	if (host == NULL)
 		return -ENODEV;
 
@@ -453,7 +447,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 
 	ecard_set_drvdata(ec, state);
 
-	ret = ide_host_register(host, NULL, hws);
+	ret = ide_host_register(host, &icside_v5_port_info, hws);
 	if (ret)
 		goto err_free;
 
drivers/ide/ide-4drives.c +2 -1
index 9e85b1e..78aca75 100644
@@ -23,7 +23,8 @@ static const struct ide_port_ops ide_4drives_port_ops = {
 
 static const struct ide_port_info ide_4drives_port_info = {
 	.port_ops		= &ide_4drives_port_ops,
-	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA,
+	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA |
+				  IDE_HFLAG_4DRIVES,
 };
 
 static int __init ide_4drives_init(void)
drivers/ide/ide-acpi.c +5 -5
index 5b704f1..12f4369 100644
@@ -304,7 +304,7 @@ static int do_drive_set_taskfiles(ide_drive_t *drive,
 	/* send all taskfile registers (0x1f1-0x1f7) *in*that*order* */
 	for (ix = 0; ix < gtf_count; ix++) {
 		u8 *gtf = (u8 *)(gtf_address + ix * REGS_PER_GTF);
-		ide_task_t task;
+		struct ide_cmd cmd;
 
 		DEBPRINT("(0x1f1-1f7): "
 			 "hex: %02x %02x %02x %02x %02x %02x %02x\n",
@@ -317,11 +317,11 @@ static int do_drive_set_taskfiles(ide_drive_t *drive,
 		}
 
 		/* convert GTF to taskfile */
-		memset(&task, 0, sizeof(ide_task_t));
-		memcpy(&task.tf_array[7], gtf, REGS_PER_GTF);
-		task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+		memset(&cmd, 0, sizeof(cmd));
+		memcpy(&cmd.tf_array[7], gtf, REGS_PER_GTF);
+		cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
 
-		err = ide_no_data_taskfile(drive, &task);
+		err = ide_no_data_taskfile(drive, &cmd);
 		if (err) {
 			printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n",
 					__func__, err);
drivers/ide/ide-atapi.c +71 -52

217 lines not on this page · raw message

drivers/ide/ide-cd.c +81 -74

389 lines not on this page · raw message

drivers/ide/ide-cd.h +1 -3
index c878bfc..1d97101 100644
@@ -11,7 +11,7 @@
 #define IDECD_DEBUG_LOG		0
 
 #if IDECD_DEBUG_LOG
-#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args)
 #else
 #define ide_debug_log(lvl, fmt, args...) do {} while (0)
 #endif
@@ -91,8 +91,6 @@ struct cdrom_info {
 	   on this device. */
 	struct request_sense sense_data;
 
-	struct request request_sense_request;
-
 	u8 max_speed;		/* Max speed of the drive. */
 	u8 current_speed;	/* Current speed of the drive. */
 
drivers/ide/ide-cs.c +1 -0
index f50210f..9e47f35 100644
@@ -154,6 +154,7 @@ static const struct ide_port_ops idecs_port_ops = {
 static const struct ide_port_info idecs_port_info = {
 	.port_ops		= &idecs_port_ops,
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.irq_flags		= IRQF_SHARED,
 };
 
 static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
drivers/ide/ide-devsets.c +1 -3
index 7c39534..5bf958e 100644
@@ -183,8 +183,6 @@ ide_startstop_t ide_do_devset(ide_drive_t *drive, struct request *rq)
 	err = setfunc(drive, *(int *)&rq->cmd[1]);
 	if (err)
 		rq->errors = err;
-	else
-		err = 1;
-	ide_end_request(drive, err, 0);
+	ide_complete_rq(drive, err, ide_rq_bytes(rq));
 	return ide_stopped;
 }
drivers/ide/ide-disk.c +83 -88

304 lines not on this page · raw message

drivers/ide/ide-disk_proc.c +15 -13
index 1f86dcb..eaea3be 100644
@@ -1,38 +1,38 @@
 #include <linux/kernel.h>
 #include <linux/ide.h>
-#include <linux/hdreg.h>
 
 #include "ide-disk.h"
 
 static int smart_enable(ide_drive_t *drive)
 {
-	ide_task_t args;
-	struct ide_taskfile *tf = &args.tf;
+	struct ide_cmd cmd;
+	struct ide_taskfile *tf = &cmd.tf;
 
-	memset(&args, 0, sizeof(ide_task_t));
+	memset(&cmd, 0, sizeof(cmd));
 	tf->feature = ATA_SMART_ENABLE;
 	tf->lbam    = ATA_SMART_LBAM_PASS;
 	tf->lbah    = ATA_SMART_LBAH_PASS;
 	tf->command = ATA_CMD_SMART;
-	args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
-	return ide_no_data_taskfile(drive, &args);
+	cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+
+	return ide_no_data_taskfile(drive, &cmd);
 }
 
 static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd)
 {
-	ide_task_t args;
-	struct ide_taskfile *tf = &args.tf;
+	struct ide_cmd cmd;
+	struct ide_taskfile *tf = &cmd.tf;
 
-	memset(&args, 0, sizeof(ide_task_t));
+	memset(&cmd, 0, sizeof(cmd));
 	tf->feature = sub_cmd;
 	tf->nsect   = 0x01;
 	tf->lbam    = ATA_SMART_LBAM_PASS;
 	tf->lbah    = ATA_SMART_LBAH_PASS;
 	tf->command = ATA_CMD_SMART;
-	args.tf_flags	= IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
-	args.data_phase	= TASKFILE_IN;
-	(void) smart_enable(drive);
-	return ide_raw_taskfile(drive, &args, buf, 1);
+	cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+	cmd.protocol = ATA_PROT_PIO;
+
+	return ide_raw_taskfile(drive, &cmd, buf, 1);
 }
 
 static int proc_idedisk_read_cache
@@ -67,6 +67,8 @@ static int proc_idedisk_read_smart(char *page, char **start, off_t off,
 	ide_drive_t	*drive = (ide_drive_t *)data;
 	int		len = 0, i = 0;
 
+	(void)smart_enable(drive);
+
 	if (get_smart_data(drive, page, sub_cmd) == 0) {
 		unsigned short *val = (unsigned short *) page;
 		char *out = (char *)val + SECTOR_SIZE;
drivers/ide/ide-dma-sff.c +13 -24
index 123d393..75a9ea2 100644
@@ -111,7 +111,7 @@ EXPORT_SYMBOL_GPL(ide_dma_host_set);
  *	May also be invoked from trm290.c
  */
 
-int ide_build_dmatable(ide_drive_t *drive, struct request *rq)
+int ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	__le32 *table = (__le32 *)hwif->dmatable_cpu;
@@ -120,11 +120,7 @@ int ide_build_dmatable(ide_drive_t *drive, struct request *rq)
 	struct scatterlist *sg;
 	u8 is_trm290 = !!(hwif->host_flags & IDE_HFLAG_TRM290);
 
-	hwif->sg_nents = ide_build_sglist(drive, rq);
-	if (hwif->sg_nents == 0)
-		return 0;
-
-	for_each_sg(hwif->sg_table, sg, hwif->sg_nents, i) {
+	for_each_sg(hwif->sg_table, sg, cmd->sg_nents, i) {
 		u32 cur_addr, cur_len, xcount, bcount;
 
 		cur_addr = sg_dma_address(sg);
@@ -179,6 +175,7 @@ EXPORT_SYMBOL_GPL(ide_build_dmatable);
 /**
  *	ide_dma_setup	-	begin a DMA phase
  *	@drive: target device
+ *	@cmd: command
  *
  *	Build an IDE DMA PRD (IDE speak for scatter gather table)
  *	and then set up the DMA transfer registers for a device
@@ -189,17 +186,16 @@ EXPORT_SYMBOL_GPL(ide_build_dmatable);
  *	is returned.
  */
 
-int ide_dma_setup(ide_drive_t *drive)
+int ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq = hwif->rq;
-	unsigned int reading = rq_data_dir(rq) ? 0 : ATA_DMA_WR;
 	u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+	u8 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR;
 	u8 dma_stat;
 
 	/* fall back to pio! */
-	if (!ide_build_dmatable(drive, rq)) {
-		ide_map_sg(drive, rq);
+	if (ide_build_dmatable(drive, cmd) == 0) {
+		ide_map_sg(drive, cmd);
 		return 1;
 	}
 
@@ -212,9 +208,9 @@ int ide_dma_setup(ide_drive_t *drive)
 
 	/* specify r/w */
 	if (mmio)
-		writeb(reading, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
+		writeb(rw, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
 	else
-		outb(reading, hwif->dma_base + ATA_DMA_CMD);
+		outb(rw, hwif->dma_base + ATA_DMA_CMD);
 
 	/* read DMA status for INTR & ERROR flags */
 	dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
@@ -228,7 +224,7 @@ int ide_dma_setup(ide_drive_t *drive)
 EXPORT_SYMBOL_GPL(ide_dma_setup);
 
 /**
- *	dma_timer_expiry	-	handle a DMA timeout
+ *	ide_dma_sff_timer_expiry	-	handle a DMA timeout
  *	@drive: Drive that timed out
  *
  *	An IDE DMA transfer timed out. In the event of an error we ask
@@ -241,7 +237,7 @@ EXPORT_SYMBOL_GPL(ide_dma_setup);
  *	This can occur if an interrupt is lost or due to hang or bugs.
  */
 
-static int dma_timer_expiry(ide_drive_t *drive)
+int ide_dma_sff_timer_expiry(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	u8 dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
@@ -265,14 +261,7 @@ static int dma_timer_expiry(ide_drive_t *drive)
 
 	return 0;	/* Status is unknown -- reset the bus */
 }
-
-void ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
-{
-	/* issue cmd to drive */
-	ide_execute_command(drive, command, &ide_dma_intr, 2 * WAIT_CMD,
-			    dma_timer_expiry);
-}
-EXPORT_SYMBOL_GPL(ide_dma_exec_cmd);
+EXPORT_SYMBOL_GPL(ide_dma_sff_timer_expiry);
 
 void ide_dma_start(ide_drive_t *drive)
 {
@@ -346,10 +335,10 @@ EXPORT_SYMBOL_GPL(ide_dma_test_irq);
 const struct ide_dma_ops sff_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
 	.dma_start		= ide_dma_start,
 	.dma_end		= ide_dma_end,
 	.dma_test_irq		= ide_dma_test_irq,
+	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
 	.dma_timeout		= ide_dma_timeout,
 	.dma_lost_irq		= ide_dma_lost_irq,
 	.dma_sff_read_status	= ide_dma_sff_read_status,
drivers/ide/ide-dma.c +22 -17
index a878f47..3dbf80c 100644
@@ -96,9 +96,13 @@ ide_startstop_t ide_dma_intr(ide_drive_t *drive)
 
 	if (OK_STAT(stat, DRIVE_READY, drive->bad_wstat | ATA_DRQ)) {
 		if (!dma_stat) {
-			struct request *rq = hwif->rq;
+			struct ide_cmd *cmd = &hwif->cmd;
 
-			task_end_request(drive, rq, stat);
+			if ((cmd->tf_flags & IDE_TFLAG_FS) == 0)
+				ide_finish_cmd(drive, cmd, stat);
+			else
+				ide_complete_rq(drive, 0,
+						cmd->rq->nr_sectors << 9);
 			return ide_stopped;
 		}
 		printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n",
@@ -106,7 +110,6 @@ ide_startstop_t ide_dma_intr(ide_drive_t *drive)
 	}
 	return ide_error(drive, "dma_intr", stat);
 }
-EXPORT_SYMBOL_GPL(ide_dma_intr);
 
 int ide_dma_good_drive(ide_drive_t *drive)
 {
@@ -116,7 +119,7 @@ int ide_dma_good_drive(ide_drive_t *drive)
 /**
  *	ide_build_sglist	-	map IDE scatter gather for DMA I/O
  *	@drive: the drive to build the DMA table for
- *	@rq: the request holding the sg list
+ *	@cmd: command
  *
  *	Perform the DMA mapping magic necessary to access the source or
  *	target buffers of a request via DMA.  The lower layers of the
@@ -124,28 +127,29 @@ int ide_dma_good_drive(ide_drive_t *drive)
  *	operate in a portable fashion.
  */
 
-int ide_build_sglist(ide_drive_t *drive, struct request *rq)
+int ide_build_sglist(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct scatterlist *sg = hwif->sg_table;
 	int i;
 
-	ide_map_sg(drive, rq);
+	ide_map_sg(drive, cmd);
 
-	if (rq_data_dir(rq) == READ)
-		hwif->sg_dma_direction = DMA_FROM_DEVICE;
+	if (cmd->tf_flags & IDE_TFLAG_WRITE)
+		cmd->sg_dma_direction = DMA_TO_DEVICE;
 	else
-		hwif->sg_dma_direction = DMA_TO_DEVICE;
-
-	i = dma_map_sg(hwif->dev, sg, hwif->sg_nents, hwif->sg_dma_direction);
-	if (i) {
-		hwif->orig_sg_nents = hwif->sg_nents;
-		hwif->sg_nents = i;
+		cmd->sg_dma_direction = DMA_FROM_DEVICE;
+
+	i = dma_map_sg(hwif->dev, sg, cmd->sg_nents, cmd->sg_dma_direction);
+	if (i == 0)
+		ide_map_sg(drive, cmd);
+	else {
+		cmd->orig_sg_nents = cmd->sg_nents;
+		cmd->sg_nents = i;
 	}
 
 	return i;
 }
-EXPORT_SYMBOL_GPL(ide_build_sglist);
 
 /**
  *	ide_destroy_dmatable	-	clean up DMA mapping
@@ -161,9 +165,10 @@ EXPORT_SYMBOL_GPL(ide_build_sglist);
 void ide_destroy_dmatable(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
+	struct ide_cmd *cmd = &hwif->cmd;
 
-	dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->orig_sg_nents,
-		     hwif->sg_dma_direction);
+	dma_unmap_sg(hwif->dev, hwif->sg_table, cmd->orig_sg_nents,
+		     cmd->sg_dma_direction);
 }
 EXPORT_SYMBOL_GPL(ide_destroy_dmatable);
 
drivers/ide/ide-eh.c +21 -9
index 1231b5e..1166497 100644
@@ -123,8 +123,18 @@ ide_startstop_t ide_error(ide_drive_t *drive, const char *msg, u8 stat)
 
 	/* retry only "normal" I/O: */
 	if (!blk_fs_request(rq)) {
-		rq->errors = 1;
-		ide_end_drive_cmd(drive, stat, err);
+		if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
+			struct ide_cmd *cmd = rq->special;
+
+			if (cmd)
+				ide_complete_cmd(drive, cmd, stat, err);
+		} else if (blk_pm_request(rq)) {
+			rq->errors = 1;
+			ide_complete_pm_rq(drive, rq);
+			return ide_stopped;
+		}
+		rq->errors = err;
+		ide_complete_rq(drive, err ? -EIO : 0, blk_rq_bytes(rq));
 		return ide_stopped;
 	}
 
@@ -136,8 +146,11 @@ static inline void ide_complete_drive_reset(ide_drive_t *drive, int err)
 {
 	struct request *rq = drive->hwif->rq;
 
-	if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET)
-		ide_end_request(drive, err ? err : 1, 0);
+	if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) {
+		if (err <= 0 && rq->errors == 0)
+			rq->errors = -EIO;
+		ide_complete_rq(drive, err ? err : 0, ide_rq_bytes(rq));
+	}
 }
 
 /* needed below */
@@ -162,8 +175,7 @@ static ide_startstop_t atapi_reset_pollfunc(ide_drive_t *drive)
 		printk(KERN_INFO "%s: ATAPI reset complete\n", drive->name);
 	else {
 		if (time_before(jiffies, hwif->poll_timeout)) {
-			ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20,
-					NULL);
+			ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20);
 			/* continue polling */
 			return ide_started;
 		}
@@ -225,7 +237,7 @@ static ide_startstop_t reset_pollfunc(ide_drive_t *drive)
 
 	if (!OK_STAT(tmp, 0, ATA_BUSY)) {
 		if (time_before(jiffies, hwif->poll_timeout)) {
-			ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
+			ide_set_handler(drive, &reset_pollfunc, HZ/20);
 			/* continue polling */
 			return ide_started;
 		}
@@ -342,7 +354,7 @@ static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi)
 		ndelay(400);
 		hwif->poll_timeout = jiffies + WAIT_WORSTCASE;
 		hwif->polling = 1;
-		__ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL);
+		__ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20);
 		spin_unlock_irqrestore(&hwif->lock, flags);
 		return ide_started;
 	}
@@ -402,7 +414,7 @@ static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi)
 	udelay(10);
 	hwif->poll_timeout = jiffies + WAIT_WORSTCASE;
 	hwif->polling = 1;
-	__ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
+	__ide_set_handler(drive, &reset_pollfunc, HZ/20);
 
 	/*
 	 * Some weird controller like resetting themselves to a strange
drivers/ide/ide-floppy.c +64 -92

272 lines not on this page · raw message

drivers/ide/ide-gd.c +2 -8
index 0471094..1aebdf1 100644
@@ -145,11 +145,6 @@ static ide_startstop_t ide_gd_do_request(ide_drive_t *drive,
 	return drive->disk_ops->do_request(drive, rq, sector);
 }
 
-static int ide_gd_end_request(ide_drive_t *drive, int uptodate, int nrsecs)
-{
-	return drive->disk_ops->end_request(drive, uptodate, nrsecs);
-}
-
 static struct ide_driver ide_gd_driver = {
 	.gen_driver = {
 		.owner		= THIS_MODULE,
@@ -162,7 +157,6 @@ static struct ide_driver ide_gd_driver = {
 	.shutdown		= ide_gd_shutdown,
 	.version		= IDE_GD_VERSION,
 	.do_request		= ide_gd_do_request,
-	.end_request		= ide_gd_end_request,
 #ifdef CONFIG_IDE_PROC_FS
 	.proc_entries		= ide_disk_proc_entries,
 	.proc_devsets		= ide_disk_proc_devsets,
@@ -182,7 +176,7 @@ static int ide_gd_open(struct block_device *bdev, fmode_t mode)
 
 	drive = idkp->drive;
 
-	ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+	ide_debug_log(IDE_DBG_FUNC, "enter");
 
 	idkp->openers++;
 
@@ -232,7 +226,7 @@ static int ide_gd_release(struct gendisk *disk, fmode_t mode)
 	struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
 	ide_drive_t *drive = idkp->drive;
 
-	ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+	ide_debug_log(IDE_DBG_FUNC, "enter");
 
 	if (idkp->openers == 1)
 		drive->disk_ops->flush(drive);
drivers/ide/ide-gd.h +1 -3
index b604bdd..5597077 100644
@@ -8,7 +8,7 @@
 #define IDE_GD_DEBUG_LOG	0
 
 #if IDE_GD_DEBUG_LOG
-#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args)
 #else
 #define ide_debug_log(lvl, fmt, args...) do {} while (0)
 #endif
@@ -20,8 +20,6 @@ struct ide_disk_obj {
 	struct device		dev;
 	unsigned int		openers;	/* protected by BKL for now */
 
-	/* Last failed packet command */
-	struct ide_atapi_pc *failed_pc;
 	/* used for blk_{fs,pc}_request() requests */
 	struct ide_atapi_pc queued_pc;
 
drivers/ide/ide-generic.c +6 -2
index 81a5282..9d03e82 100644
@@ -32,6 +32,10 @@ static int probe_mask;
 module_param(probe_mask, int, 0);
 MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");
 
+static const struct ide_port_info ide_generic_port_info = {
+	.host_flags		= IDE_HFLAG_NO_DMA,
+};
+
 static ssize_t store_add(struct class *cls, const char *buf, size_t n)
 {
 	unsigned int base, ctl;
@@ -46,7 +50,7 @@ static ssize_t store_add(struct class *cls, const char *buf, size_t n)
 	hw.irq = irq;
 	hw.chipset = ide_generic;
 
-	rc = ide_host_add(NULL, hws, NULL);
+	rc = ide_host_add(&ide_generic_port_info, hws, NULL);
 	if (rc)
 		return rc;
 
@@ -184,7 +188,7 @@ static int __init ide_generic_init(void)
 #endif
 			hw.chipset = ide_generic;
 
-			rc = ide_host_add(NULL, hws, NULL);
+			rc = ide_host_add(&ide_generic_port_info, hws, NULL);
 			if (rc) {
 				release_region(io_addr + 0x206, 1);
 				release_region(io_addr, 8);
drivers/ide/ide-h8300.c +33 -33

130 lines not on this page · raw message

drivers/ide/ide-io-std.c +40 -33

161 lines not on this page · raw message

drivers/ide/ide-io.c +104 -181

410 lines not on this page · raw message

drivers/ide/ide-ioctls.c +22 -22

44 lines not on this page · raw message

drivers/ide/ide-iops.c +27 -39

66 lines not on this page · raw message

drivers/ide/ide-lib.c +10 -10
index f6c683d..217b7fd 100644

Lines of this file are not shown. View the raw message.

drivers/ide/ide-park.c +10 -9
index f30e521..9490b44 100644

Lines of this file are not shown. View the raw message.

drivers/ide/ide-pm.c +24 -18

42 lines not on this page · raw message

drivers/ide/ide-pnp.c +5 -1
index bac9b39..6e80b77 100644

Lines of this file are not shown. View the raw message.

drivers/ide/ide-probe.c +40 -55

95 lines not on this page · raw message

drivers/ide/ide-proc.c +8 -8
index 417cde5..10a88bf 100644

Lines of this file are not shown. View the raw message.

drivers/ide/ide-tape.c +46 -77

123 lines not on this page · raw message

drivers/ide/ide-taskfile.c +205 -243

448 lines not on this page · raw message

drivers/ide/ide_arm.c +5 -1
index bdcac94..cf63854 100644

Lines of this file are not shown. View the raw message.

drivers/ide/it821x.c +1 -1
index 6b9fc95..0d4ac65 100644

Lines of this file are not shown. View the raw message.

drivers/ide/macide.c +6 -1
index 3c60064..4b1718e 100644

Lines of this file are not shown. View the raw message.

drivers/ide/ns87415.c +18 -18
index ea48a3e..7b65fe5 100644

Lines of this file are not shown. View the raw message.

drivers/ide/palm_bk3710.c +9 -4
index f38aac7..c7acca0 100644

Lines of this file are not shown. View the raw message.

drivers/ide/pdc202xx_old.c +2 -2
index cba66eb..f7536d1 100644

Lines of this file are not shown. View the raw message.

drivers/ide/pmac.c +8 -24
index 74625e8..2bfcfed 100644

Lines of this file are not shown. View the raw message.

drivers/ide/q40ide.c +8 -7
index 9f9c0b3..2a43a2f 100644

Lines of this file are not shown. View the raw message.

drivers/ide/sc1200.c +1 -1
index dbdd298..1c3a829 100644

Lines of this file are not shown. View the raw message.

drivers/ide/scc_pata.c +53 -62

115 lines not on this page · raw message

drivers/ide/setup-pci.c +4 -0
index 24bc884..a19dbcc 100644

Lines of this file are not shown. View the raw message.

drivers/ide/sgiioc4.c +9 -21
index fdb9d70..b12de83 100644

Lines of this file are not shown. View the raw message.

drivers/ide/siimage.c +1 -1
index 1811ae9..075cb12 100644

Lines of this file are not shown. View the raw message.

drivers/ide/sl82c105.c +1 -1
index dba213c..d25137b 100644

Lines of this file are not shown. View the raw message.

drivers/ide/tc86c001.c +1 -1
index 84109f5..427d4b3 100644

Lines of this file are not shown. View the raw message.

drivers/ide/trm290.c +5 -10
index 1c09e54..ed14968 100644

Lines of this file are not shown. View the raw message.

drivers/ide/tx4938ide.c +35 -33

68 lines not on this page · raw message

drivers/ide/tx4939ide.c +51 -58

109 lines not on this page · raw message

include/linux/ide.h +126 -113

239 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.

#1 lore raw
Quoted 10 lines · Bartlomiej Zolnierkiewicz

Hi,

More "uninteresting" IDE changes:

- make all host drivers use struct ide_port_info
- sanitize command/request completion API
- replace ide_task_t by struct ide_cmd
- improve debugging scheme (from Borislav Petkov)
- misc fixes/cleanups

ping?

These changes are not _that_ uninteresting to not apply them. ;)

More importantly they are holding back "part 3"...

Quoted 145 lines

Linus, please pull from:

master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/

to receive the following updates:

 arch/m68k/include/asm/ide.h |   73 -------
 drivers/ide/alim15x3.c      |    9 +-
 drivers/ide/at91_ide.c      |   70 ++++----
 drivers/ide/au1xxx-ide.c    |   39 +---
 drivers/ide/buddha.c        |   11 +-
 drivers/ide/cmd64x.c        |    6 +-
 drivers/ide/cs5536.c        |    2 +-
 drivers/ide/delkin_cb.c     |    1 +
 drivers/ide/dtc2278.c       |    3 +-
 drivers/ide/falconide.c     |   45 ++++-
 drivers/ide/gayle.c         |    7 +-
 drivers/ide/hpt366.c        |    6 +-
 drivers/ide/icside.c        |   24 +--
 drivers/ide/ide-4drives.c   |    3 +-
 drivers/ide/ide-acpi.c      |   10 +-
 drivers/ide/ide-atapi.c     |  123 +++++++-----
 drivers/ide/ide-cd.c        |  155 ++++++++-------
 drivers/ide/ide-cd.h        |    4 +-
 drivers/ide/ide-cs.c        |    1 +
 drivers/ide/ide-devsets.c   |    4 +-
 drivers/ide/ide-disk.c      |  171 ++++++++---------
 drivers/ide/ide-disk_proc.c |   28 ++--
 drivers/ide/ide-dma-sff.c   |   37 ++---
 drivers/ide/ide-dma.c       |   39 ++--
 drivers/ide/ide-eh.c        |   30 ++-
 drivers/ide/ide-floppy.c    |  156 ++++++---------
 drivers/ide/ide-gd.c        |   10 +-
 drivers/ide/ide-gd.h        |    4 +-
 drivers/ide/ide-generic.c   |    8 +-
 drivers/ide/ide-h8300.c     |   66 ++++----
 drivers/ide/ide-io-std.c    |   73 ++++----
 drivers/ide/ide-io.c        |  285 ++++++++++-----------------
 drivers/ide/ide-ioctls.c    |   44 ++--
 drivers/ide/ide-iops.c      |   66 +++----
 drivers/ide/ide-lib.c       |   20 +-
 drivers/ide/ide-park.c      |   19 +-
 drivers/ide/ide-pm.c        |   42 +++--
 drivers/ide/ide-pnp.c       |    6 +-
 drivers/ide/ide-probe.c     |   95 ++++------
 drivers/ide/ide-proc.c      |   16 +-
 drivers/ide/ide-tape.c      |  123 +++++--------
 drivers/ide/ide-taskfile.c  |  448 ++++++++++++++++++++-----------------------
 drivers/ide/ide_arm.c       |    6 +-
 drivers/ide/it821x.c        |    2 +-
 drivers/ide/macide.c        |    7 +-
 drivers/ide/ns87415.c       |   36 ++--
 drivers/ide/palm_bk3710.c   |   13 +-
 drivers/ide/pdc202xx_old.c  |    4 +-
 drivers/ide/pmac.c          |   32 +---
 drivers/ide/q40ide.c        |   15 +-
 drivers/ide/sc1200.c        |    2 +-
 drivers/ide/scc_pata.c      |  115 +++++------
 drivers/ide/setup-pci.c     |    4 +
 drivers/ide/sgiioc4.c       |   30 +--
 drivers/ide/siimage.c       |    2 +-
 drivers/ide/sl82c105.c      |    2 +-
 drivers/ide/tc86c001.c      |    2 +-
 drivers/ide/trm290.c        |   15 +-
 drivers/ide/tx4938ide.c     |   68 ++++----
 drivers/ide/tx4939ide.c     |  109 +++++------
 include/linux/ide.h         |  239 ++++++++++++-----------
 61 files changed, 1418 insertions(+), 1667 deletions(-)

Bartlomiej Zolnierkiewicz (67):
icside: use struct ide_port_info also for PCB version 5 (v2)
ide_arm: use struct ide_port_info
ide-generic: use struct ide_port_info
ide-pnp: use struct ide_port_info
buddha: use struct ide_port_info
macide: use struct ide_port_info
ide: move ->rqsize init from init_irq() to ide_init_port()
ide: remove IDE_ARCH_INTR (v2)
ide: remove IDE_ARCH_LOCK (v2)
ide: make m68k host drivers use IDE_HFLAG_MMIO
ide: cleanup <asm-m68k/ide.h>
at91_ide: use readsw()/writesw() directly
ide: include <asm/ide.h> only when needed
scc_pata: remove DECLARE_SCC_DEV() macro (v2)
ide: fix memleak on failure in probe_for_drive()
ide: fix error message in pre_task_out_intr()
ide: allow host drivers to specify IRQ flags
ide: remove now superfluous check from ide_host_register()
ide: add IDE_HFLAG_DTC2278 host flag
ide: add IDE_HFLAG_4DRIVES host flag
ide: add "flagged" taskfile flags to struct ide_taskfile (v2)
ide: complete power step in ide_complete_pm_request()
ide: factor out completion of taskfile from ide_end_drive_cmd()
ide: move request type specific code from ide_end_drive_cmd() to callers (v3)
ide: no need to read Status and Error registers for "empty" taskfile requests
ide: remove ->data_phase field from ide_hwif_t
ide: move smart_enable() call out from get_smart_data()
icside: icside_dma_setup() fixes
trm290: trm290_dma_setup() fix
au1xxx-ide: auide_dma_end() cleanup
ide: remove no longer needed PC_FLAG_TIMEDOUT packet command flag
ide-floppy: remove superfluous check from ide_floppy_end_request()
ide-tape: remove superfluous tape->lock
ide: move ->failed_pc to ide_drive_t
ide: use ->end_request only for private device driver requests ide-{floppy,tape}: cleanup ide*_end_request()
ide: remove ->end_request method
ide: return request status from ->pc_callback method
ide: use blk_fs_request() check in ide-taskfile.c
ide: call ide_build_sglist() prior to ->dma_setup (v2)
ide: remove ide_task_t typedef
ide: pass command instead of request to ide_pio_datablock()
ide: move command related fields from ide_hwif_t to struct ide_cmd
ide: set IDE_TFLAG_WRITE basing on data phase used in ide_taskfile_ioctl()
ide: use ata_tf_protocols enums
ide: merge task_{in,out}_intr()
ide: inline task_in_unexpected() into task_pio_intr()
ide: unify exit paths in task_pio_intr()
ide: task_error() -> task_error_cmd()
ide: use ide_complete_cmd() for head unload commands
ide: use ide_complete_cmd() for REQ_UNPARK_HEADS
ide: sanitize ide_finish_cmd()
ide: make ide_special_rq() BUG() on unknown requests
ide: add ide_end_rq() (v2)
ide: sanitize ide_end_rq()
ide: pass error value to ide_complete_rq()
ide: move rq->errors quirk out from ide_end_request()
ide: remove BUG() from ide_complete_rq()
ide: pass number of bytes to complete to ide_complete_rq()
ide: use ide_end_rq() in ide_complete_rq()
ide: remove ide_end_request()
ide: pass command to ide_map_sg()
ide: use do_rw_taskfile() for ATA_CMD_PACKET commands
ide: set hwif->expiry prior to calling [__]ide_set_handler()
ide: add ->dma_timer_expiry method and remove ->dma_exec_cmd one (v2)
ide: remove ide_execute_pkt_cmd() (v2)
ide: keep track of number of bytes instead of sectors in struct ide_cmd

Borislav Petkov (2):
ide: improve debugging scheme
ide-cd: use ide_drive_t's rq in cdrom_queue_request_sense

Kevin Hilman (1):
IDE: palm_bk3710: use ioremap instead of arch-specific IO_ADDRESS()

[...]