Using POWER or APM for battery handling
Hey Anton,
My machines (HP Jornada 600-series and HP Jornada 700-series) both rely on batteries for power. Now, in the past it has all been handled by an APM_EMULATION driver that essentially detects the current state (loading YES/NO, POWER_LEFT, ESTIMATED TIME LEFT,...) and adjusts
the state of the machine.
My question is should I port this to instead
use the power class (drivers/power) or not.
The batteries are same for both 600/700 but
contain no internal chip so I would need
seperate battery drivers for both machines.
Best wishes
Kristoffer Ericson
Signature · 1 line
Kristoffer Ericson <[email protected]>
Hello Kristoffer,
Quoted 11 lines · Kristoffer Ericson
Hey Anton,
My machines (HP Jornada 600-series and HP Jornada 700-series) both rely on batteries for power. Now, in the past it has all been handled by an
APM_EMULATIONdriver that essentially detects the current state (loading YES/NO,POWER_LEFT, ESTIMATED TIME LEFT,...) and adjusts
the state of the machine.My question is should I port this to instead
use the power class (drivers/power) or not.
The driver is already there:drivers/power/apm_power.c
So all you need is Jornada driver for the power supply class, and then apm_power.c will work for your battery driver.
Feel free to ask if there is anything still not clear.
Thanks,
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
Quoted 15 lines · On Fri, 27 Mar 2009 22:29:47 +0300 Anton Vorontsov <[email protected]>…
Hello Kristoffer,
Quoted 11 lines · Kristoffer Ericson
Hey Anton,
My machines (HP Jornada 600-series and HP Jornada 700-series) both rely on batteries for power. Now, in the past it has all been handled by an
APM_EMULATIONdriver that essentially detects the current state (loading YES/NO,POWER_LEFT, ESTIMATED TIME LEFT,...) and adjusts
the state of the machine.My question is should I port this to instead
use the power class (drivers/power) or not.
Quoted 7 lines
The driver is already there:
drivers/power/apm_power.cSo all you need is Jornada driver for the power supply class, and then
apm_power.cwill work for your battery driver.Feel free to ask if there is anything still not clear.
Great!
I think I understand, but should I create this driver
inside /drivers/power or inside the mach folder (in this case arch/arm/mach-sa1100)?
Quoted 7 lines
Thanks,
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
Signature · 1 line
Kristoffer Ericson <[email protected]>
On Fri, Mar 27, 2009 at 09:41:06PM +0100, Kristoffer Ericson wrote:
[...]
Quoted 6 lines
Quoted 6 lines
The driver is already there:
drivers/power/apm_power.cSo all you need is Jornada driver for the power supply class, and then
apm_power.cwill work for your battery driver.
Quoted 6 lines
Quoted 1 line
Feel free to ask if there is anything still not clear.
Great!
I think I understand, but should I create this driver
inside /drivers/power or inside the mach folder (in this casearch/arm/mach-sa1100)?
I would prefer drivers/power/.
Thanks,
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
Quoted 8 lines · On Fri, 27 Mar 2009 23:55:13 +0300 Anton Vorontsov <[email protected]>…
On Fri, Mar 27, 2009 at 09:41:06PM +0100, Kristoffer Ericson wrote:
[...]Quoted 6 lines
Quoted 6 lines
The driver is already there:
drivers/power/apm_power.cSo all you need is Jornada driver for the power supply class, and then
apm_power.cwill work for your battery driver.
Quoted 8 lines
Quoted 6 lines
Quoted 1 line
Feel free to ask if there is anything still not clear.
Great!
I think I understand, but should I create this driver
inside /drivers/power or inside the mach folder (in this casearch/arm/mach-sa1100)?I would prefer
drivers/power/.
roger, big thanks for help.
Quoted 7 lines
Thanks,
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
Signature · 1 line
Kristoffer Ericson <[email protected]>