sh_rtc: use set_irq_wake()
Subsystems (2)
PATCH 1/1 sh_rtc: use set_irq_wake()
From: Magnus Damm <[email protected]>
Modify the sh_rtc driver to use set_irq_wake() during suspend and resume. These functions are used to enable the rtc interrupts in the interrupt controller so the rtc can be used to wakeup the system from suspend.
Signed-off-by Magnus Damm <[email protected]>
---
drivers/rtc/rtc-sh.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
drivers/rtc/rtc-sh.c +36 -0
@@ -795,10 +795,46 @@ static int __devexit sh_rtc_remove(strucreturn 0 ; } + +static void sh_rtc_set_irq_wake (struct device *dev,int enabled) +{ +struct platform_device *pdev =to_platform_device (dev); +struct sh_rtc *rtc =platform_get_drvdata (pdev); + +set_irq_wake (rtc->periodic_irq, enabled); +if (rtc->carry_irq >0 ) { +set_irq_wake (rtc->carry_irq, enabled); +set_irq_wake (rtc->alarm_irq, enabled); + } + +} + +static int sh_rtc_suspend (struct device *dev) +{ +if (device_may_wakeup (dev)) +sh_rtc_set_irq_wake (dev,1 ); + +return 0 ; +} + +static int sh_rtc_resume (struct device *dev) +{ +if (device_may_wakeup (dev)) +sh_rtc_set_irq_wake (dev,0 ); + +return 0 ; +} + +static struct dev_pm_ops sh_rtc_dev_pm_ops = { + .suspend = sh_rtc_suspend, + .resume = sh_rtc_resume, +}; +static struct platform_driver sh_rtc_platform_driver = { .driver = { .name =DRV_NAME , .owner =THIS_MODULE , + .pm = &sh_rtc_dev_pm_ops, }, .probe = sh_rtc_probe, .remove =__devexit_p (sh_rtc_remove),