Problem with kvm on -tip
Hi,
Since I am not sure if this problem has already been reported, here it goes.
My log gets the following messages in -tip tree. I don't know for how long this issue is around and whether the problem is on lockdep or on kvm. After the first lockdep message, I get a huge amount of BUGs from kvm (which stop only when I kill kvm). So, I believe issue is on kvm.
I am running on an AMD64. Please let me know if more info is needed (config, etc).
[ 3293.134688] BUG: MAX_LOCK_DEPTH too low! [ 3293.134704] turning off the locking correctness validator. [ 3293.134718] Pid: 5117, comm: kvm Not tainted 2.6.30-rc1-tip-01420-g58e70a8 #18 [ 3293.134727] Call Trace: [ 3293.134749] [<ffffffff802805f6>] __lock_acquire+0x4c6/0xbf0 [ 3293.134764] [<ffffffff80280e2e>] lock_acquire+0x10e/0x160 [ 3293.134780] [<ffffffff802f3760>] ? mm_take_all_locks+0x110/0x150 [ 3293.134798] [<ffffffff80580c3b>] _spin_lock_nest_lock+0x3b/0x50 [ 3293.134811] [<ffffffff802f3760>] ? mm_take_all_locks+0x110/0x150 [ 3293.134823] [<ffffffff802f3760>] mm_take_all_locks+0x110/0x150 [ 3293.134838] [<ffffffff803093af>] do_mmu_notifier_register+0xdf/0x1f0 [ 3293.134852] [<ffffffff803094f3>] mmu_notifier_register+0x13/0x20 [ 3293.134899] [<ffffffffa02edede>] kvm_dev_ioctl+0x1ae/0x360 [kvm] [ 3293.134914] [<ffffffff80327a16>] vfs_ioctl+0x36/0xb0 [ 3293.134927] [<ffffffff80327b22>] do_vfs_ioctl+0x92/0x5c0 [ 3293.134942] [<ffffffff80273d9b>] ? up_read+0x2b/0x40 [ 3293.134955] [<ffffffff8032809f>] sys_ioctl+0x4f/0x80 [ 3293.134971] [<ffffffff8020c1f2>] system_call_fastpath+0x16/0x1b request [ 3297.598606] BUG: using smp_processor_id() in preemptible [00000000] code: kvm/5118 [ 3297.598630] caller is kvm_arch_vcpu_ioctl_run+0x61c/0xd10 [kvm] [ 3297.598635] Pid: 5118, comm: kvm Not tainted 2.6.30-rc1-tip-01420-g58e70a8 #18 [ 3297.598638] Call Trace: [ 3297.598647] [<ffffffff803d9db3>] debug_smp_processor_id+0xe3/0xf0 [ 3297.598660] [<ffffffffa02f684c>] kvm_arch_vcpu_ioctl_run+0x61c/0xd10 [kvm] [ 3297.598667] [<ffffffff8032de67>] ? file_update_time+0xc7/0x130 [ 3297.598672] [<ffffffff802ed26b>] ? do_wp_page+0x1eb/0x7e0 [ 3297.598684] [<ffffffffa02ebb23>] kvm_vcpu_ioctl+0x4b3/0x8f0 [kvm] [ 3297.598691] [<ffffffff805804d6>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 3297.598696] [<ffffffff80581a35>] ? do_IRQ+0x95/0x100 [ 3297.598702] [<ffffffff8025c85a>] ? irq_exit+0x8a/0xc0 [ 3297.598707] [<ffffffff80327a16>] vfs_ioctl+0x36/0xb0 [ 3297.598712] [<ffffffff80327b22>] do_vfs_ioctl+0x92/0x5c0 [ 3297.598716] [<ffffffff8032809f>] sys_ioctl+0x4f/0x80 [ 3297.598723] [<ffffffff8020c1f2>] system_call_fastpath+0x16/0x1b
Quoted 9 lines · Luis Henriques
Hi,
Since I am not sure if this problem has already been reported, here it goes.
My log gets the following messages in -tip tree. I don't know for how long this issue is around and whether the problem is on lockdep or on kvm. After the first lockdep message, I get a huge amount of BUGs from kvm (which stop only when I kill kvm). So, I believe issue is on kvm.
Jeremy, have you considered (and tested) KVM when doing the MMU/CPU notifier changes? It's these changes:
224101e: x86/paravirt: finish change from lazy cpu to context switch start/end
b407fc5: x86/paravirt: flush pending mmu updates on context switch 7fd7d83: x86/pvops: replace arch_enter_lazy_cpu_mode with arch_start_context_switch
Ingo
Quoted 12 lines · Ingo Molnar
Quoted 6 lines · Luis Henriques
Hi,
Since I am not sure if this problem has already been reported, here it goes.
My log gets the following messages in -tip tree. I don't know for how long this issue is around and whether the problem is on lockdep or on kvm. After the first lockdep message, I get a huge amount of BUGs from kvm (which stop only when I kill kvm). So, I believe issue is on kvm.
Jeremy, have you considered (and tested) KVM when doing the MMU/CPU notifier changes? It's these changes:
I use kvm regularly with those changes in place, without seeing a problem. KVM uses a different mechanism to be notified about context switches, so the context-switch hook changes should have no effect on it. The preempt-lazy-mmu changes are near the mmu notifiers, but shouldn't interact any differently with them. KVM also outright uses lazy mmu updates and the pte pvops, but not in any way that's unusual or be broken by these updates (as far as I can tell).
I would expect one of b8bcfe997e4, b407fc57b8 or 252a6bf2a to be the ones which would actually change preemption in a way which could cause problems (though the last just removes a preempt disable/enable pair added a few changes earlier).
Looking back at the lockdep messages, they're definitely not paths I would expect to be affected by these changes. Did you identify them by bisection, or are you just trying to winnow out likely candidates?
Quoted 2 lines
224101e: x86/paravirt: finish change from lazy cpu to context switch start/end
This just passes an extra parameter to arch_start_context_switch, but has no other code changes.
Quoted 2 lines
b407fc5: x86/paravirt: flush pending mmu updates on context switch
This shouldn't have any effect on a properly implemented pvops user. I updated kvm along with the other pvops users when I made this change, and it appeared to be correct.
Quoted 1 line
7fd7d83: x86/pvops: replace
arch_enter_lazy_cpu_modewitharch_start_context_switch
This is a simple rename.
J
Quoted 9 lines · Luis Henriques
Hi,
Since I am not sure if this problem has already been reported, here it goes.
My log gets the following messages in -tip tree. I don't know for how long this issue is around and whether the problem is on lockdep or on kvm. After the first lockdep message, I get a huge amount of BUGs from kvm (which stop only when I kill kvm). So, I believe issue is on kvm.
Quoted 5 lines
I am running on an AMD64. Please let me know if more info is needed (config, etc).
[ 3293.134688] BUG: MAX_LOCK_DEPTH too low!
Looks like a genuine issue, need to increase MAX_LOCK_DEPTH. Andrea?
Quoted 21 lines
[ 3293.134704] turning off the locking correctness validator. [ 3293.134718] Pid: 5117, comm: kvm Not tainted 2.6.30-rc1-tip-01420-g58e70a8 #18 [ 3293.134727] Call Trace: [ 3293.134749] [<ffffffff802805f6>] __lock_acquire+0x4c6/0xbf0 [ 3293.134764] [<ffffffff80280e2e>] lock_acquire+0x10e/0x160 [ 3293.134780] [<ffffffff802f3760>] ? mm_take_all_locks+0x110/0x150 [ 3293.134798] [<ffffffff80580c3b>] _spin_lock_nest_lock+0x3b/0x50 [ 3293.134811] [<ffffffff802f3760>] ? mm_take_all_locks+0x110/0x150 [ 3293.134823] [<ffffffff802f3760>] mm_take_all_locks+0x110/0x150 [ 3293.134838] [<ffffffff803093af>] do_mmu_notifier_register+0xdf/0x1f0 [ 3293.134852] [<ffffffff803094f3>] mmu_notifier_register+0x13/0x20 [ 3293.134899] [<ffffffffa02edede>] kvm_dev_ioctl+0x1ae/0x360 [kvm] [ 3293.134914] [<ffffffff80327a16>] vfs_ioctl+0x36/0xb0 [ 3293.134927] [<ffffffff80327b22>] do_vfs_ioctl+0x92/0x5c0 [ 3293.134942] [<ffffffff80273d9b>] ? up_read+0x2b/0x40 [ 3293.134955] [<ffffffff8032809f>] sys_ioctl+0x4f/0x80 [ 3293.134971] [<ffffffff8020c1f2>] system_call_fastpath+0x16/0x1b request
Quoted 17 lines
[ 3297.598606] BUG: using smp_processor_id() in preemptible [00000000] code: kvm/5118 [ 3297.598630] caller is kvm_arch_vcpu_ioctl_run+0x61c/0xd10 [kvm] [ 3297.598635] Pid: 5118, comm: kvm Not tainted 2.6.30-rc1-tip-01420-g58e70a8 #18 [ 3297.598638] Call Trace: [ 3297.598647] [<ffffffff803d9db3>] debug_smp_processor_id+0xe3/0xf0 [ 3297.598660] [<ffffffffa02f684c>] kvm_arch_vcpu_ioctl_run+0x61c/0xd10 [kvm] [ 3297.598667] [<ffffffff8032de67>] ? file_update_time+0xc7/0x130 [ 3297.598672] [<ffffffff802ed26b>] ? do_wp_page+0x1eb/0x7e0 [ 3297.598684] [<ffffffffa02ebb23>] kvm_vcpu_ioctl+0x4b3/0x8f0 [kvm] [ 3297.598691] [<ffffffff805804d6>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 3297.598696] [<ffffffff80581a35>] ? do_IRQ+0x95/0x100 [ 3297.598702] [<ffffffff8025c85a>] ? irq_exit+0x8a/0xc0 [ 3297.598707] [<ffffffff80327a16>] vfs_ioctl+0x36/0xb0 [ 3297.598712] [<ffffffff80327b22>] do_vfs_ioctl+0x92/0x5c0 [ 3297.598716] [<ffffffff8032809f>] sys_ioctl+0x4f/0x80 [ 3297.598723] [<ffffffff8020c1f2>] system_call_fastpath+0x16/0x1b
This might be fixed by the attached patch.
Signature · 2 lines
I have a truly marvellous patch that fixes the bug which this signature is too narrow to contain.
Quoted 1 line
From
248a107e6d5d96fe276b48cef98daecec03804cfMon Sep 17 00:00:00 2001
From: Matt T. Yourst <[email protected]>
Date: Tue, 24 Feb 2009 15:28:00 -0300
Subject: [PATCH] KVM: x86: silence preempt warning on kvm_write_guest_time
This issue just appeared in kvm-84 when running on 2.6.28.7 (x86-64) with PREEMPT enabled.
We're getting syslog warnings like this many (but not all) times qemu tells KVM to run the VCPU:
BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-x86/28938 caller is kvm_arch_vcpu_ioctl_run+0x5d1/0xc70 [kvm] Pid: 28938, comm: qemu-system-x86 2.6.28.7-mtyrel-64bit Call Trace: debug_smp_processor_id+0xf7/0x100 kvm_arch_vcpu_ioctl_run+0x5d1/0xc70 [kvm] ? __wake_up+0x4e/0x70 ? wake_futex+0x27/0x40 kvm_vcpu_ioctl+0x2e9/0x5a0 [kvm] enqueue_hrtimer+0x8a/0x110 _spin_unlock_irqrestore+0x27/0x50 vfs_ioctl+0x31/0xa0 do_vfs_ioctl+0x74/0x480 sys_futex+0xb4/0x140 sys_ioctl+0x99/0xa0 system_call_fastpath+0x16/0x1b
As it turns out, the call trace is messed up due to gcc's inlining, but I isolated the problem anyway: kvm_write_guest_time() is being used in a non-thread-safe manner on preemptable kernels.
Basically kvm_write_guest_time()'s body needs to be surrounded by preempt_disable() and preempt_enable(), since the kernel won't let us query any per-CPU data (indirectly using smp_processor_id()) without preemption disabled. The attached patch fixes this issue by disabling preemption inside kvm_write_guest_time().
[marcelo: surround only __get_cpu_var calls since the warning is harmless]
--- arch/x86/kvm/x86.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
arch/x86/kvm/x86.c +2 -0
@@ -630,10 +630,12 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)if ((!vcpu->time_page))return ; +preempt_disable ();if (unlikely (vcpu->hv_clock_tsc_khz !=__get_cpu_var (cpu_tsc_khz))) {kvm_set_time_scale (__get_cpu_var (cpu_tsc_khz), &vcpu->hv_clock); vcpu->hv_clock_tsc_khz =__get_cpu_var (cpu_tsc_khz); } +preempt_enable ();/* Keep irq disabled to prevent changes to the clock */ local_irq_save (flags);
Signature · 1 line
1.6.1.1
Hi,
Quoted 2 lines · Avi Kivity
This might be fixed by the attached patch.
I confirm that the patch you sent removes the warnings but does it really solve the issue? (Sorry, I really do not know this code so I might be saying something really stupid.)
What I understand from your patch is that the only portion of code that needs protection is the __get_cpu_var(). If this is true then a patch like the one below would do a better job. But I am not sure that nothing else needs protection since the code immediately following the preempt_enable (in your patch) is an invocation to local_irq_save()...
--- arch/x86/kvm/x86.c | 10 +++++++--- 1 files changed, 7 insertions(+), 3 deletions(-)
arch/x86/kvm/x86.c +7 -3
@@ -626,13 +626,17 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)unsigned long flags;struct kvm_vcpu_arch *vcpu = &v->arch;void *shared_kaddr; +uint32_t tsc_khz;if ((!vcpu->time_page))return ; -if (unlikely (vcpu->hv_clock_tsc_khz !=__get_cpu_var (cpu_tsc_khz))) { -kvm_set_time_scale (__get_cpu_var (cpu_tsc_khz), &vcpu->hv_clock); - vcpu->hv_clock_tsc_khz =__get_cpu_var (cpu_tsc_khz); +preempt_disable (); + tsc_khz =__get_cpu_var (cpu_tsc_khz); +preempt_enable (); +if (unlikely (vcpu->hv_clock_tsc_khz != tsc_khz)) { +kvm_set_time_scale (tsc_khz, &vcpu->hv_clock); + vcpu->hv_clock_tsc_khz = tsc_khz; }/* Keep irq disabled to prevent changes to the clock */
Signature · 1 line
1.6.2.1
Quoted 11 lines · Luis Henriques
Hi,
Quoted 2 lines · Avi Kivity
This might be fixed by the attached patch.
I confirm that the patch you sent removes the warnings but does it really solve the issue? (Sorry, I really do not know this code so I might be saying something really stupid.)
It does. If we are later migrated to another cpu, this code snippet will be called again and re-set the clock.
Quoted 23 lines
What I understand from your patch is that the only portion of code that needs protection is the
__get_cpu_var(). If this is true then a patch like the one below would do a better job. But I am not sure that nothing else needs protection since the code immediately following thepreempt_enable(in your patch) is an invocation tolocal_irq_save()...--- arch/x86/kvm/x86.c | 10 +++++++--- 1 files changed, 7 insertions(+), 3 deletions(-)arch/x86/kvm/x86.c +1
-0@@ -626,13 +626,17 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)unsigned long flags;struct kvm_vcpu_arch *vcpu = &v->arch;void *shared_kaddr; +uint32_t tsc_khz;if ((!vcpu->time_page))return ;
arch/x86/kvm/x86.c static void kvm_write_guest_time(struct kvm_vcpu *v) · line 640
Quoted 10 lines
arch/x86/kvm/x86.c +6
-3-if (unlikely (vcpu->hv_clock_tsc_khz !=__get_cpu_var (cpu_tsc_khz))) { -kvm_set_time_scale (__get_cpu_var (cpu_tsc_khz), &vcpu->hv_clock); - vcpu->hv_clock_tsc_khz =__get_cpu_var (cpu_tsc_khz); +preempt_disable (); + tsc_khz =__get_cpu_var (cpu_tsc_khz); +preempt_enable (); +if (unlikely (vcpu->hv_clock_tsc_khz != tsc_khz)) { +kvm_set_time_scale (tsc_khz, &vcpu->hv_clock); + vcpu->hv_clock_tsc_khz = tsc_khz; }
Since the whole thing is unlikely(), there will be no runtime difference between the two patches.
Signature · 1 line
error compiling committee.c: too many arguments to function
Quoted 8 lines · Avi Kivity
Quoted 7 lines · Luis Henriques
Hi,
Quoted 2 lines · Avi Kivity
This might be fixed by the attached patch.
Quoted 7 lines
Quoted 4 lines
I confirm that the patch you sent removes the warnings but does it really solve the issue? (Sorry, I really do not know this code so I might be saying something really stupid.)
It does. If we are later migrated to another cpu, this code snippet will be called again and re-set the clock.
Ok, understood. Thank you for the comment and sorry about the noise.
--
Luis Henriques
Quoted 38 lines
Quoted 22 lines
What I understand from your patch is that the only portion of code that needs protection is the
__get_cpu_var(). If this is true then a patch like the one below would do a better job. But I am not sure that nothing else needs protection since the code immediately following thepreempt_enable(in your patch) is an invocation tolocal_irq_save()...--- arch/x86/kvm/x86.c | 10 +++++++--- 1 files changed, 7 insertions(+), 3 deletions(-)arch/x86/kvm/x86.c +1
-0@@ -626,13 +626,17 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)unsigned long flags;struct kvm_vcpu_arch *vcpu = &v->arch;void *shared_kaddr; +uint32_t tsc_khz;if ((!vcpu->time_page))return ; - if (unlikely(vcpu->hv_clock_tsc_khz != __get_cpu_var(cpu_tsc_khz)))arch/x86/kvm/x86.c static void kvm_write_guest_time(struct kvm_vcpu *v) · line 640
Quoted 10 lines
arch/x86/kvm/x86.c +6
-2{ -kvm_set_time_scale (__get_cpu_var (cpu_tsc_khz), &vcpu->hv_clock); - vcpu->hv_clock_tsc_khz =__get_cpu_var (cpu_tsc_khz); +preempt_disable (); + tsc_khz =__get_cpu_var (cpu_tsc_khz); +preempt_enable (); +if (unlikely (vcpu->hv_clock_tsc_khz != tsc_khz)) { +kvm_set_time_scale (tsc_khz, &vcpu->hv_clock); + vcpu->hv_clock_tsc_khz = tsc_khz; }Since the whole thing is
unlikely(), there will be no runtime difference between the two patches.Signature · 1 line
error compiling committee.c: too many arguments to function
arch/x86/kvm/x86.c static void kvm_write_guest_time(struct kvm_vcpu *v) · line 638
Quoted 13 lines · Avi Kivity
index a1ecec5..b556b6a 100644
arch/x86/kvm/x86.c +2
-0@@ -630,10 +630,12 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)if ((!vcpu->time_page))return ; +preempt_disable ();if (unlikely (vcpu->hv_clock_tsc_khz !=__get_cpu_var (cpu_tsc_khz))) {kvm_set_time_scale (__get_cpu_var (cpu_tsc_khz), &vcpu->hv_clock); vcpu->hv_clock_tsc_khz =__get_cpu_var (cpu_tsc_khz); } +preempt_enable ();
fix look good, but note that this is an open-coded get_cpu_var() sequence - please use get_cpu_var()/put_cpu_var() instead.
Ingo
Quoted 4 lines · Ingo Molnar
Quoted 4 lines
arch/x86/kvm/x86.c +0
-0@@ -630,10 +630,12 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)if ((!vcpu->time_page))return ;
Quoted 10 lines
arch/x86/kvm/x86.c static void kvm_write_guest_time(struct kvm_vcpu *v) · line 639
Quoted 7 lines
arch/x86/kvm/x86.c +2
-0+preempt_disable ();if (unlikely (vcpu->hv_clock_tsc_khz !=__get_cpu_var (cpu_tsc_khz))) {kvm_set_time_scale (__get_cpu_var (cpu_tsc_khz), &vcpu->hv_clock); vcpu->hv_clock_tsc_khz =__get_cpu_var (cpu_tsc_khz); } +preempt_enable ();fix look good, but note that this is an open-coded
get_cpu_var()sequence - please use get_cpu_var()/put_cpu_var() instead.
Right, will do.
Signature · 1 line
error compiling committee.c: too many arguments to function
Quoted 23 lines · Avi Kivity
Quoted 2 lines
[ 3293.134688] BUG: MAX_LOCK_DEPTH too low!Looks like a genuine issue, need to increase
MAX_LOCK_DEPTH. Andrea?Quoted 18 lines
[ 3293.134704] turning off the locking correctness validator. [ 3293.134718] Pid: 5117, comm: kvm Not tainted 2.6.30-rc1-tip-01420-g58e70a8 #18 [ 3293.134727] Call Trace: [ 3293.134749] [<ffffffff802805f6>] __lock_acquire+0x4c6/0xbf0 [ 3293.134764] [<ffffffff80280e2e>] lock_acquire+0x10e/0x160 [ 3293.134780] [<ffffffff802f3760>] ? mm_take_all_locks+0x110/0x150 [ 3293.134798] [<ffffffff80580c3b>] _spin_lock_nest_lock+0x3b/0x50 [ 3293.134811] [<ffffffff802f3760>] ? mm_take_all_locks+0x110/0x150 [ 3293.134823] [<ffffffff802f3760>] mm_take_all_locks+0x110/0x150 [ 3293.134838] [<ffffffff803093af>] do_mmu_notifier_register+0xdf/0x1f0 [ 3293.134852] [<ffffffff803094f3>] mmu_notifier_register+0x13/0x20 [ 3293.134899] [<ffffffffa02edede>] kvm_dev_ioctl+0x1ae/0x360 [kvm] [ 3293.134914] [<ffffffff80327a16>] vfs_ioctl+0x36/0xb0 [ 3293.134927] [<ffffffff80327b22>] do_vfs_ioctl+0x92/0x5c0 [ 3293.134942] [<ffffffff80273d9b>] ? up_read+0x2b/0x40 [ 3293.134955] [<ffffffff8032809f>] sys_ioctl+0x4f/0x80 [ 3293.134971] [<ffffffff8020c1f2>] system_call_fastpath+0x16/0x1b request
Thing is, its grabbing all vma locks, and we have a lock depth limit of
48. Now when we started this, the claim was that kvm would only need this when the process was very fresh and would thus not yet have many vma, ergo we should never run into this limit.
Has that changed?
Quoted 28 lines · Peter Zijlstra
Quoted 25 lines · Avi Kivity
Quoted 3 lines
[ 3293.134688] BUG: MAX_LOCK_DEPTH too low!Looks like a genuine issue, need to increase
MAX_LOCK_DEPTH. Andrea?Quoted 19 lines
[ 3293.134704] turning off the locking correctness validator. [ 3293.134718] Pid: 5117, comm: kvm Not tainted 2.6.30-rc1-tip-01420-g58e70a8 #18 [ 3293.134727] Call Trace: [ 3293.134749] [<ffffffff802805f6>] __lock_acquire+0x4c6/0xbf0 [ 3293.134764] [<ffffffff80280e2e>] lock_acquire+0x10e/0x160 [ 3293.134780] [<ffffffff802f3760>] ? mm_take_all_locks+0x110/0x150 [ 3293.134798] [<ffffffff80580c3b>] _spin_lock_nest_lock+0x3b/0x50 [ 3293.134811] [<ffffffff802f3760>] ? mm_take_all_locks+0x110/0x150 [ 3293.134823] [<ffffffff802f3760>] mm_take_all_locks+0x110/0x150 [ 3293.134838] [<ffffffff803093af>] do_mmu_notifier_register+0xdf/0x1f0 [ 3293.134852] [<ffffffff803094f3>] mmu_notifier_register+0x13/0x20 [ 3293.134899] [<ffffffffa02edede>] kvm_dev_ioctl+0x1ae/0x360 [kvm] [ 3293.134914] [<ffffffff80327a16>] vfs_ioctl+0x36/0xb0 [ 3293.134927] [<ffffffff80327b22>] do_vfs_ioctl+0x92/0x5c0 [ 3293.134942] [<ffffffff80273d9b>] ? up_read+0x2b/0x40 [ 3293.134955] [<ffffffff8032809f>] sys_ioctl+0x4f/0x80 [ 3293.134971] [<ffffffff8020c1f2>] system_call_fastpath+0x16/0x1b request
Quoted 7 lines
Thing is, its grabbing all vma locks, and we have a lock depth limit of
48. Now when we started this, the claim was that kvm would only need this when the process was very fresh and would thus not yet have many vma, ergo we should never run into this limit.Has that changed?
Hasn't changed; this is on VM creation.
Signature · 2 lines
I have a truly marvellous patch that fixes the bug which this signature is too narrow to contain.