Unexplained NFS mount hangs
Subsystems (2)
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on demand. The timing of the hangs as noted by the timestamp in /var/log/messages varies. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few clien
ts have their mounts hang at the same exact time, but this is not consistent. In /var/log/messages we see
Apr 12 02:04:12 worker120 kernel: nfs: server broker101 not responding, still trying
One very interesting aspect of this behavior is that the load value on the client with the hung mount immediately spikes to (16.00)+(normal load value). We have also seen client load spikes to (30.00)+(normal load value). These discrete load value increases might be a good hint.
Running 'df' prints some output and then hangs when it reaches the hung mount point. 'mount -v' shows the mount point like normal. When an NFS server is rebooted, we are used to seeing the client log a "nfs: server ___________ not responding, still trying", then a "nfs: server __________ OK" message when it comes back online. With this issue there is never an "OK" message even though the NFS server is still functioning for all other NFS clients. On a client which has a hung NFS mount, running 'rpcinfo -p' and 'showmount -e' against the NFS server shows that RPC and NFS appear to be functioning between client and server even during the issue.
# rpcinfo -p broker101
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100021 1 udp 32779 nlockmgr
100021 3 udp 32779 nlockmgr
100021 4 udp 32779 nlockmgr
100021 1 tcp 60389 nlockmgr
100021 3 tcp 60389 nlockmgr
100021 4 tcp 60389 nlockmgr
100011 1 udp 960 rquotad
100011 2 udp 960 rquotad
100011 1 tcp 963 rquotad
100011 2 tcp 963 rquotad
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100005 1 udp 995 mountd
100005 1 tcp 998 mountd
100005 2 udp 995 mountd
100005 2 tcp 998 mountd
100005 3 udp 995 mountd
100005 3 tcp 998 mountd# showmount -e broker101 Export list for broker101: /mnt/sdc1 * /mnt/sdb1 *
It is confusing that the NFS client doesn't recover automatically. So whatever the issue is evidently is blocking the kernel from seeing that the NFS server is live and functioning after the issue is triggered.
I'm running low on ideas of how to resolve this. One idea I have is to modify some NFS client timeout values, but I don't have a specific reason to think this will resolve the problem. Right now the values are:
# sysctl -a | grep -i nfs fs.nfs.nlm_grace_period = 0 fs.nfs.nlm_timeout = 10 fs.nfs.nlm_udpport = 0 fs.nfs.nlm_tcpport = 0 fs.nfs.nsm_use_hostnames = 0 fs.nfs.nsm_local_state = 0 fs.nfs.nfs_callback_tcpport = 0 fs.nfs.idmap_cache_timeout = 600 fs.nfs.nfs_mountpoint_timeout = 500 fs.nfs.nfs_congestion_kb = 65152 sunrpc.nfs_debug = 0 sunrpc.nfsd_debug = 0
I've turned on nfs debugging but there was a tremendous amount of output because of the NFS clients activity on several different (and working) NFS mount points. I can capture and supply this output again if it would be helpful. Has anyone seen this behavior before, and does anyone have any suggestions for how this might be resolved?
Thanks for your time,
Daniel Stickney
Operations Manager - Systems and Network Engineer
Quoted 6 lines · Daniel Stickney
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on demand. The timing of the hangs as noted by the timestamp in
/var/log/messagesvaries. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few clien ts have their mounts hang at the same exact time, but this is not consistent. In/var/log/messageswe seeApr 12 02:04:12 worker120 kernel: nfs: server broker101 not responding, still trying
Are these NFS/UDP or NFS/TCP mounts?
If you use a different kernel (say, 2.6.26) on the CentOS systems, do the hangs go away?
Quoted 68 lines
One very interesting aspect of this behavior is that the load value on the client with the hung mount immediately spikes to (16.00)+(normal load value). We have also seen client load spikes to (30.00)+(normal load value). These discrete load value increases might be a good hint.
Running 'df' prints some output and then hangs when it reaches the hung mount point. 'mount -v' shows the mount point like normal. When an NFS server is rebooted, we are used to seeing the client log a "nfs: server ___________ not responding, still trying", then a "nfs: server __________ OK" message when it comes back online. With this issue there is never an "OK" message even though the NFS server is still functioning for all other NFS clients. On a client which has a hung NFS mount, running 'rpcinfo -p' and 'showmount -e' against the NFS server shows that RPC and NFS appear to be functioning between client and server even during the issue.
# rpcinfo -p broker101 program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100021 1 udp 32779 nlockmgr 100021 3 udp 32779 nlockmgr 100021 4 udp 32779 nlockmgr 100021 1 tcp 60389 nlockmgr 100021 3 tcp 60389 nlockmgr 100021 4 tcp 60389 nlockmgr 100011 1 udp 960 rquotad 100011 2 udp 960 rquotad 100011 1 tcp 963 rquotad 100011 2 tcp 963 rquotad 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100005 1 udp 995 mountd 100005 1 tcp 998 mountd 100005 2 udp 995 mountd 100005 2 tcp 998 mountd 100005 3 udp 995 mountd 100005 3 tcp 998 mountd# showmount -e broker101 Export list for broker101: /mnt/sdc1 * /mnt/sdb1 *It is confusing that the NFS client doesn't recover automatically. So whatever the issue is evidently is blocking the kernel from seeing that the NFS server is live and functioning after the issue is triggered.
I'm running low on ideas of how to resolve this. One idea I have is to modify some NFS client timeout values, but I don't have a specific reason to think this will resolve the problem. Right now the values are:
# sysctl -a | grep -i nfs fs.nfs.nlm_grace_period = 0 fs.nfs.nlm_timeout = 10 fs.nfs.nlm_udpport = 0 fs.nfs.nlm_tcpport = 0 fs.nfs.nsm_use_hostnames = 0 fs.nfs.nsm_local_state = 0 fs.nfs.nfs_callback_tcpport = 0 fs.nfs.idmap_cache_timeout = 600 fs.nfs.nfs_mountpoint_timeout = 500 fs.nfs.nfs_congestion_kb = 65152 sunrpc.nfs_debug = 0 sunrpc.nfsd_debug = 0I've turned on nfs debugging but there was a tremendous amount of output because of the NFS clients activity on several different (and working) NFS mount points. I can capture and supply this output again if it would be helpful. Has anyone seen this behavior before, and does anyone have any suggestions for how this might be resolved?
Thanks for your time,
Daniel Stickney
Operations Manager - Systems and Network Engineer
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 2 lines
Chuck Lever chuck[dot]lever[at]oracle[dot]com
Hi Daniel,
Op maandag 13-04-2009 om 09:24 uur [tijdzone -0600], schreef Daniel Stickney:
Quoted 3 lines
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on demand. The timing of the hangs as noted by the timestamp in
/var/log/messagesvaries. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few cl!
ien
Quoted 8 lines
ts have their mounts hang at the same exact time, but this is not consistent. In
/var/log/messageswe seeApr 12 02:04:12 worker120 kernel: nfs: server broker101 not responding, still tryingOne very interesting aspect of this behavior is that the load value on the client with the hung mount immediately spikes to (16.00)+(normal load value). We have also seen client load spikes to (30.00)+(normal load value). These discrete load value increases might be a good hint.
Running 'df' prints some output and then hangs when it reaches the hung mount point. 'mount -v' shows the mount point like normal. When an NFS server is rebooted, we are used to seeing the client log a "nfs: server ___________ not responding, still trying", then a "nfs: server __________ OK" message when it comes back online. With this issue there is never an "OK" message even though the NFS server is still functioning for all other NFS clients. On a client which has a hung NFS mount, running 'rpcinfo -p' and 'showmount -e' against the NFS server shows that RPC and NFS appear to be functioning between client and server even during the issue.
This matches very will with my own experience.
For a long time i was thinking this was write related, but recently i had a hang on a reading client.
My application is streaming video, and i can have about 40Mbps hitting the file server, while reading about 16Mbps at the same time
The reading clients only read, they do not write. Most of the hangs i see are from the writers, and once now from a reader.
I have tried several recent kernels, and never been able to find a relation to the kernel on the file server. From my experiments, all 2.6.2x kernels are affected. I cannot reproduce at will though. It is waiting till it happens.
Thanks,
Rudy
Op maandag 13-04-2009 om 12:12 uur [tijdzone -0400], schreef Chuck Lever:
Quoted 21 lines · Daniel Stickney
Quoted 20 lines
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on demand. The timing of the hangs as noted by the timestamp in
/var/log/messages varies. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few clien ts have their mounts hang at the same exact time, but this is not consistent. In/var/log/messageswe see
Quoted 8 lines
Quoted 2 lines
Apr 12 02:04:12 worker120 kernel: nfs: server broker101 notresponding, still trying
Are these NFS/UDP or NFS/TCP mounts?
If you use a different kernel (say, 2.6.26) on the CentOS systems, do the hangs go away?
Hi Chuck,
In my case NFS/TCP.
I have tried most 2.6.2x kernels, it may take a week or longer for them to hang, but hang they do :(
have been fighting with this one since at least 2.6.24, and probably 2.6.22
The reader that was hanging last week, is running 2.6.26
Rudy
Quoted 36 lines · Rudy Zijlstra
Op maandag 13-04-2009 om 12:12 uur [tijdzone -0400], schreef Chuck Lever:
Quoted 21 lines · Daniel Stickney
Quoted 20 lines
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on demand. The timing of the hangs as noted by the timestamp in
/var/log/messages varies. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few clien ts have their mounts hang at the same exact time, but this is not consistent. In/var/log/messageswe seeQuoted 8 lines
Quoted 2 lines
Apr 12 02:04:12 worker120 kernel: nfs: server broker101 notresponding, still trying
Are these NFS/UDP or NFS/TCP mounts?
If you use a different kernel (say, 2.6.26) on the CentOS systems, do the hangs go away?
Hi Chuck,
In my case NFS/TCP.
Quoted 7 lines
I have tried most 2.6.2x kernels, it may take a week or longer for them to hang, but hang they do :(
have been fighting with this one since at least 2.6.24, and probably 2.6.22
The reader that was hanging last week, is running 2.6.26
If you run "netstat --ip" on a client that has a hanging NFS mount point, what does it show?
--
Chuck Lever
chuck[dot]lever[at]oracle[dot]com
Quoted 21 lines · On Mon, 13 Apr 2009 12:12:47 -0400 Chuck Lever <[email protected]> wrote:
Quoted 20 lines · Daniel Stickney
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on demand. The timing of the hangs as noted by the timestamp in
/var/log/messages varies. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few clien ts have their mounts hang at the same exact time, but this is not consistent. In/var/log/messageswe see
Quoted 7 lines
Quoted 2 lines
Apr 12 02:04:12 worker120 kernel: nfs: server broker101 notresponding, still trying
Are these NFS/UDP or NFS/TCP mounts?
If you use a different kernel (say, 2.6.26) on the CentOS systems, do the hangs go away?
Hi Chuck,
Thanks for your reply. The mounts are NFSv3 over TCP. We have not tried a different kernel (because of the number of servers to be upgraded), but that is next on to ToDo list. Wanted to explore the possibility that some other change might resolve the issue, but I am getting close to launching the kernel upgrades. (The prepackaged RHEL/CentOS 2.6.18* kernels have other NFS client problems with attribute caching which really mess things up, so that is why we have had to compile from source)
To add a little more info, in a post on April 10th titled "NFSv3 Client Timeout on 2.6.27" Bryan mentioned that his client socket was in state FIN_WAIT2, and server in CLOSE_WAIT, which is exactly what I am seeing here.
tcp 0 0 worker120.cluster:944 broker101.cluster:nfs FIN_WAIT2
This is especially interesting because the original nfs "server not responding" message was about 32 hours ago. On this same client, all other NFS mounts to other servers are showing state "established".
-Daniel
Quoted 86 lines
Quoted 86 lines
One very interesting aspect of this behavior is that the load value on the client with the hung mount immediately spikes to (16.00)+ (normal load value). We have also seen client load spikes to (30.00)+ (normal load value). These discrete load value increases might be a good hint.
Running 'df' prints some output and then hangs when it reaches the hung mount point. 'mount -v' shows the mount point like normal. When an NFS server is rebooted, we are used to seeing the client log a "nfs: server ___________ not responding, still trying", then a "nfs:
server __________ OK" message when it comes back online. With this issue there is never an "OK" message even though the NFS server is still functioning for all other NFS clients. On a client which has a hung NFS mount, running 'rpcinfo -p' and 'showmount -e' against the NFS server shows that RPC and NFS appear to be functioning between client and server even during the issue.# rpcinfo -p broker101 program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100021 1 udp 32779 nlockmgr 100021 3 udp 32779 nlockmgr 100021 4 udp 32779 nlockmgr 100021 1 tcp 60389 nlockmgr 100021 3 tcp 60389 nlockmgr 100021 4 tcp 60389 nlockmgr 100011 1 udp 960 rquotad 100011 2 udp 960 rquotad 100011 1 tcp 963 rquotad 100011 2 tcp 963 rquotad 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100005 1 udp 995 mountd 100005 1 tcp 998 mountd 100005 2 udp 995 mountd 100005 2 tcp 998 mountd 100005 3 udp 995 mountd 100005 3 tcp 998 mountd# showmount -e broker101 Export list for broker101: /mnt/sdc1 * /mnt/sdb1 *It is confusing that the NFS client doesn't recover automatically. So whatever the issue is evidently is blocking the kernel from seeing that the NFS server is live and functioning after the issue is triggered.
I'm running low on ideas of how to resolve this. One idea I have is to modify some NFS client timeout values, but I don't have a specific reason to think this will resolve the problem. Right now the values are:
# sysctl -a | grep -i nfs fs.nfs.nlm_grace_period = 0 fs.nfs.nlm_timeout = 10 fs.nfs.nlm_udpport = 0 fs.nfs.nlm_tcpport = 0 fs.nfs.nsm_use_hostnames = 0 fs.nfs.nsm_local_state = 0 fs.nfs.nfs_callback_tcpport = 0 fs.nfs.idmap_cache_timeout = 600 fs.nfs.nfs_mountpoint_timeout = 500 fs.nfs.nfs_congestion_kb = 65152 sunrpc.nfs_debug = 0 sunrpc.nfsd_debug = 0I've turned on nfs debugging but there was a tremendous amount of output because of the NFS clients activity on several different (and working) NFS mount points. I can capture and supply this output again if it would be helpful. Has anyone seen this behavior before, and does anyone have any suggestions for how this might be resolved?
Thanks for your time,
Quoted 8 lines
Quoted 7 lines
Daniel Stickney
Operations Manager - Systems and Network Engineer
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Daniel Stickney
Operations Manager - Systems and Network Engineer
Quoted 34 lines · Daniel Stickney
Quoted 21 lines · On Mon, 13 Apr 2009 12:12:47 -0400 Chuck Lever <[email protected]> wrote:
Quoted 20 lines · Daniel Stickney
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on demand. The timing of the hangs as noted by the timestamp in
/var/log/messages varies. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few clien ts have their mounts hang at the same exact time, but this is not consistent. In/var/log/messageswe seeQuoted 7 lines
Quoted 2 lines
Apr 12 02:04:12 worker120 kernel: nfs: server broker101 notresponding, still trying
Are these NFS/UDP or NFS/TCP mounts?
If you use a different kernel (say, 2.6.26) on the CentOS systems, do the hangs go away?
Hi Chuck,
Quoted 7 lines
Thanks for your reply. The mounts are NFSv3 over TCP. We have not tried a different kernel (because of the number of servers to be upgraded), but that is next on to ToDo list. Wanted to explore the possibility that some other change might resolve the issue, but I am getting close to launching the kernel upgrades. (The prepackaged RHEL/CentOS 2.6.18* kernels have other NFS client problems with attribute caching which really mess things up, so that is why we have had to compile from source)
To add a little more info, in a post on April 10th titled "NFSv3 Client Timeout on 2.6.27" Bryan mentioned that his client socket was in state
FIN_WAIT2, and server inCLOSE_WAIT, which is exactly what I am seeing here.tcp 0 0 worker120.cluster:944 broker101.cluster:nfs
FIN_WAIT2This is especially interesting because the original nfs "server not responding" message was about 32 hours ago. On this same client, all other NFS mounts to other servers are showing state "established".
Poking around in git, I see this recent commit:
commit 2a9e1cfa23fb62da37739af81127dab5af095d99
Author: Trond Myklebust <[email protected]> Date: Tue Oct 28 15:21:39 2008 -0400
SUNRPC: Respond promptly to server TCP resets
If the server sends us an RST error while we're in theTCP_ESTABLISHED
state, then that will not result in a state change, and so the
RPC client
ends up hanging forever (see
http://bugzilla.kernel.org/show_bug.cgi?id=11154)
We can intercept the reset by setting up an sk->sk_error_report callback,
which will then allow us to initiate a proper shutdown and retry...
We also make sure that if the send request receives an
ECONNRESET, then we
shutdown too...
Which may address part of the problem. If I'm reading the output of "git describe" correctly, this one should be in 2.6.28.
There are a whole series of commits in this area that went upstream about a month ago. It's not clear if these are also necessary to address the problem. But they would be in 2.6.30-rc1.
Quoted 101 lines
-Daniel
Quoted 86 lines
Quoted 86 lines
One very interesting aspect of this behavior is that the load value on the client with the hung mount immediately spikes to (16.00)+ (normal load value). We have also seen client load spikes to (30.00)+ (normal load value). These discrete load value increases might be a good hint.
Running 'df' prints some output and then hangs when it reaches the hung mount point. 'mount -v' shows the mount point like normal. When an NFS server is rebooted, we are used to seeing the client log a "nfs: server ___________ not responding, still trying", then a "nfs:
server __________ OK" message when it comes back online. With this issue there is never an "OK" message even though the NFS server is still functioning for all other NFS clients. On a client which has a hung NFS mount, running 'rpcinfo -p' and 'showmount -e' against the NFS server shows that RPC and NFS appear to be functioning between client and server even during the issue.# rpcinfo -p broker101 program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100021 1 udp 32779 nlockmgr 100021 3 udp 32779 nlockmgr 100021 4 udp 32779 nlockmgr 100021 1 tcp 60389 nlockmgr 100021 3 tcp 60389 nlockmgr 100021 4 tcp 60389 nlockmgr 100011 1 udp 960 rquotad 100011 2 udp 960 rquotad 100011 1 tcp 963 rquotad 100011 2 tcp 963 rquotad 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100005 1 udp 995 mountd 100005 1 tcp 998 mountd 100005 2 udp 995 mountd 100005 2 tcp 998 mountd 100005 3 udp 995 mountd 100005 3 tcp 998 mountd# showmount -e broker101 Export list for broker101: /mnt/sdc1 * /mnt/sdb1 *It is confusing that the NFS client doesn't recover automatically. So whatever the issue is evidently is blocking the kernel from seeing that the NFS server is live and functioning after the issue is triggered.
I'm running low on ideas of how to resolve this. One idea I have is to modify some NFS client timeout values, but I don't have a specific reason to think this will resolve the problem. Right now the values are:
# sysctl -a | grep -i nfs fs.nfs.nlm_grace_period = 0 fs.nfs.nlm_timeout = 10 fs.nfs.nlm_udpport = 0 fs.nfs.nlm_tcpport = 0 fs.nfs.nsm_use_hostnames = 0 fs.nfs.nsm_local_state = 0 fs.nfs.nfs_callback_tcpport = 0 fs.nfs.idmap_cache_timeout = 600 fs.nfs.nfs_mountpoint_timeout = 500 fs.nfs.nfs_congestion_kb = 65152 sunrpc.nfs_debug = 0 sunrpc.nfsd_debug = 0I've turned on nfs debugging but there was a tremendous amount of output because of the NFS clients activity on several different (and working) NFS mount points. I can capture and supply this output again if it would be helpful. Has anyone seen this behavior before, and does anyone have any suggestions for how this might be resolved?
Thanks for your time,
Quoted 8 lines
Quoted 7 lines
Daniel Stickney
Operations Manager - Systems and Network Engineer
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.htmlDaniel Stickney
Operations Manager - Systems and Network Engineer
Signature · 2 lines
Chuck Lever chuck[dot]lever[at]oracle[dot]com
Op maandag 13-04-2009 om 13:08 uur [tijdzone -0400], schreef Chuck Lever:
Quoted 76 lines · Daniel Stickney
Quoted 49 lines
Quoted 21 lines · On Mon, 13 Apr 2009 12:12:47 -0400 Chuck Lever <[email protected]> wrote:
Quoted 20 lines · Daniel Stickney
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on demand. The timing of the hangs as noted by the timestamp in
/var/log/messages varies. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few clien ts have their mounts hang at the same exact time, but this is not consistent. In/var/log/messageswe seeQuoted 7 lines
Quoted 2 lines
Apr 12 02:04:12 worker120 kernel: nfs: server broker101 notresponding, still trying
Are these NFS/UDP or NFS/TCP mounts?
If you use a different kernel (say, 2.6.26) on the CentOS systems, do the hangs go away?
Hi Chuck,
Thanks for your reply. The mounts are NFSv3 over TCP. We have not tried a different kernel (because of the number of servers to be upgraded), but that is next on to ToDo list. Wanted to explore the possibility that some other change might resolve the issue, but I am getting close to launching the kernel upgrades. (The prepackaged RHEL/CentOS 2.6.18* kernels have other NFS client problems with attribute caching which really mess things up, so that is why we have had to compile from source)
To add a little more info, in a post on April 10th titled "NFSv3 Client Timeout on 2.6.27" Bryan mentioned that his client socket was in state
FIN_WAIT2, and server inCLOSE_WAIT, which is exactly what I am seeing here.Quoted 6 lines
tcp 0 0 worker120.cluster:944
broker101.cluster:nfsFIN_WAIT2This is especially interesting because the original nfs "server not responding" message was about 32 hours ago. On this same client, all other NFS mounts to other servers are showing state "established".
Poking around in git, I see this recent commit:
commit
2a9e1cfa23fb62da37739af81127dab5af095d99Author: Trond Myklebust <[email protected]> Date: Tue Oct 28 15:21:39 2008 -0400SUNRPC: Respond promptly to server TCP resets
If the server sends us an RST error while we're in the
TCP_ESTABLISHED
state, then that will not result in a state change, and so the
RPC clientends up hanging forever (see http://bugzilla.kernel.org/show_bug.cgi?id=11154) We can intercept the reset by setting up an sk->sk_error_reportcallback,
which will then allow us to initiate a proper shutdown and retry...
Quoted 9 lines
We also make sure that if the send request receives an
ECONNRESET, then we
shutdown too...Signed-off-by Trond Myklebust <[email protected]>Which may address part of the problem. If I'm reading the output of "git describe" correctly, this one should be in 2.6.28.
Chuck,
thanks a lot for this.
I'm 90% certain i've had a hang on 2.6.28.2 (currently running 2.6.28.7 since March 14th on the writing clients).
Too much HW related problems in the past weeks to be fully certain (and me too much travelling and thus not at home).
Quoted 4 lines
There are a whole series of commits in this area that went upstream about a month ago. It's not clear if these are also necessary to address the problem. But they would be in 2.6.30-rc1.
OK, i'll switch to 2.6.30 on all clients once it is out. Prefer to wait for release, as they are production type machines.
If i get a hang, i'll check with "netstat --ip"
Cheers,
Rudy
Quoted 84 lines · On Mon, 13 Apr 2009 13:08:14 -0400 Chuck Lever <[email protected]> wrote:
Quoted 49 lines · Daniel Stickney
Quoted 22 lines · On Mon, 13 Apr 2009 12:12:47 -0400 Chuck Lever <[email protected]> wrote:
Quoted 21 lines · Daniel Stickney
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on demand. The timing of the hangs as noted by the timestamp in
/var/log/messages varies. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few clien ts have their mounts hang at the same exact time, but this is not consistent.
In/var/log/messageswe seeQuoted 7 lines
Quoted 2 lines
Apr 12 02:04:12 worker120 kernel: nfs: server broker101 notresponding, still trying
Are these NFS/UDP or NFS/TCP mounts?
If you use a different kernel (say, 2.6.26) on the CentOS systems, do the hangs go away?
Hi Chuck,
Thanks for your reply. The mounts are NFSv3 over TCP. We have not tried a different kernel (because of the number of servers to be upgraded), but that is next on to ToDo list. Wanted to explore the possibility that some other change might resolve the issue, but I am getting close to launching the kernel upgrades. (The prepackaged RHEL/CentOS 2.6.18* kernels have other NFS client problems with attribute caching which really mess things up, so that is why we have had to compile from source)
To add a little more info, in a post on April 10th titled "NFSv3 Client Timeout on 2.6.27" Bryan mentioned that his client socket was in state
FIN_WAIT2, and server inCLOSE_WAIT, which is exactly what I am seeing here.Quoted 7 lines
tcp 0 0 worker120.cluster:944
broker101.cluster:nfsFIN_WAIT2This is especially interesting because the original nfs "server not responding" message was about 32 hours ago. On this same client, all other NFS mounts to other servers are showing state "established".
Poking around in git, I see this recent commit:
commit
2a9e1cfa23fb62da37739af81127dab5af095d99Author: Trond Myklebust <[email protected]> Date: Tue Oct 28 15:21:39 2008 -0400SUNRPC: Respond promptly to server TCP resets
If the server sends us an RST error while we're in the
TCP_ESTABLISHED
state, then that will not result in a state change, and so the
RPC clientends up hanging forever (see http://bugzilla.kernel.org/show_bug.cgi?id=11154) We can intercept the reset by setting up an sk->sk_error_reportcallback,
which will then allow us to initiate a proper shutdown and
retry...We also make sure that if the send request receives an
ECONNRESET, then we
shutdown too...
Quoted 9 lines
Signed-off-by Trond Myklebust <[email protected]>Which may address part of the problem. If I'm reading the output of "git describe" correctly, this one should be in 2.6.28.
There are a whole series of commits in this area that went upstream about a month ago. It's not clear if these are also necessary to address the problem. But they would be in 2.6.30-rc1.
Thanks Chuck. Reading through the bug reports, I also now believe that a kernel upgrade is the most likely resolution to this problem. I appreciate your time!
-Daniel
Quoted 102 lines
Quoted 102 lines
-Daniel
Quoted 97 lines
Quoted 96 lines
One very interesting aspect of this behavior is that the load value on the client with the hung mount immediately spikes to (16.00)+ (normal load value). We have also seen client load spikes to (30.00)+
(normal load value). These discrete load value increases might be a good hint.Running 'df' prints some output and then hangs when it reaches the hung mount point. 'mount -v' shows the mount point like normal. When an NFS server is rebooted, we are used to seeing the client log a "nfs: server ___________ not responding, still trying", then a "nfs: server __________ OK" message when it comes back online. With this issue there is never an "OK" message even though the NFS server is still functioning for all other NFS clients. On a client which has a hung NFS mount, running 'rpcinfo -p' and 'showmount -e' against the NFS server shows that RPC and NFS appear to be functioning between client and server even during the issue.
# rpcinfo -p broker101 program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100021 1 udp 32779 nlockmgr 100021 3 udp 32779 nlockmgr 100021 4 udp 32779 nlockmgr 100021 1 tcp 60389 nlockmgr 100021 3 tcp 60389 nlockmgr 100021 4 tcp 60389 nlockmgr 100011 1 udp 960 rquotad 100011 2 udp 960 rquotad 100011 1 tcp 963 rquotad 100011 2 tcp 963 rquotad 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100005 1 udp 995 mountd 100005 1 tcp 998 mountd 100005 2 udp 995 mountd 100005 2 tcp 998 mountd 100005 3 udp 995 mountd 100005 3 tcp 998 mountd# showmount -e broker101 Export list for broker101: /mnt/sdc1 * /mnt/sdb1 *It is confusing that the NFS client doesn't recover automatically. So whatever the issue is evidently is blocking the kernel from seeing that the NFS server is live and functioning after the issue is triggered.
I'm running low on ideas of how to resolve this. One idea I have is to modify some NFS client timeout values, but I don't have a specific reason to think this will resolve the problem. Right now the values are:
# sysctl -a | grep -i nfs fs.nfs.nlm_grace_period = 0 fs.nfs.nlm_timeout = 10 fs.nfs.nlm_udpport = 0 fs.nfs.nlm_tcpport = 0 fs.nfs.nsm_use_hostnames = 0 fs.nfs.nsm_local_state = 0 fs.nfs.nfs_callback_tcpport = 0 fs.nfs.idmap_cache_timeout = 600 fs.nfs.nfs_mountpoint_timeout = 500 fs.nfs.nfs_congestion_kb = 65152 sunrpc.nfs_debug = 0 sunrpc.nfsd_debug = 0I've turned on nfs debugging but there was a tremendous amount of output because of the NFS clients activity on several different (and working) NFS mount points. I can capture and supply this output again if it would be helpful. Has anyone seen this behavior before, and does anyone have any suggestions for how this might be resolved?
Thanks for your time,
Daniel Stickney
Operations Manager - Systems and Network Engineer
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 3 lines
Quoted 2 lines
Daniel Stickney
Operations Manager - Systems and Network Engineer
Daniel Stickney
Operations Manager - Systems and Network Engineer
Quoted 1 line · Daniel Stickney
To add a little more info, in a post on April 10th titled "NFSv3 Client Timeout on 2.6.27" Bryan mentioned that his client socket was in state
FIN_WAIT2, and server inCLOSE_WAIT, which is exactly what I am seeing here.
Since my problems originated after upgrading to Ubuntu intrepid in a 'etch -> hardy -> intrepid' cycle, and hardy contained 2.6.24, I wonder if the regression was in:
commit e06799f958bf7f9f8fae15f0c6f519953fb0257c
Author: Trond Myklebust <[email protected]> Date: Mon Nov 5 15:44:12 2007 -0500
SUNRPC: Use shutdown() instead of close() when disconnecting a TCP socket
By using shutdown() rather than close() we allow the RPC client to wait for the TCP close handshake to complete before we start trying to reconnect using the same port.
We use shutdown(SHUT_WR) only instead of shutting down both directions, however we wait until the server has closed the connection on its side.
$ git describe e06799f958bf7f9f8fae15f0c6f519953fb0257c --contains v2.6.25-rc1~1146^2~105
I came in today to find that the one machine outside of production that was hung that I could toy with eventually fixed itself, albeit five days later.
Apr 8 12:42:34 bvt-was02 kernel: [3706362.490101] nfs: server file01.prod.example.com not responding, still trying Apr 13 12:09:59 bvt-was02 kernel: [4136407.174292] nfs: server
file01.prod.example.com OK
There looks like there are a lot of additional timeouts added in 2.6.30-rc1, so perhaps I'll compile from source and wait to see if this happens again on the test machines.
Bryan
Op maandag 13-04-2009 om 21:25 uur [tijdzone +0200], schreef Rudy Zijlstra:
Quoted 29 lines
Op maandag 13-04-2009 om 13:08 uur [tijdzone -0400], schreef Chuck Lever:
Quoted 17 lines · Daniel Stickney
Quoted 16 lines
Quoted 12 lines · On Mon, 13 Apr 2009 12:12:47 -0400 Chuck Lever <[email protected]> wrote:
Quoted 11 lines · Daniel Stickney
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
demand. The timing of the hangs as noted by the timestamp in
/var/log/messages varies. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few clien ts have their mounts hang at the same exact time, but this is not consistent. In/var/log/messageswe see
Quoted 5 lines
OK, i'll switch to 2.6.30 on all clients once it is out. Prefer to wait for release, as they are production type machines.
If i get a hang, i'll check with "netstat --ip"
Just now one of my 2.6.28.7 machines is hanging.
netstat results in client status:
tcp 0 0 mythm.romunt.nl:1020 repeater.romunt.nl:nfsd FIN_WAIT2 tcp 76 0 mythm.romunt.nl:6544 repeater.romunt.n:53854 ESTABLISHED
and on the server i find:
tcp 1 0 repeater.romunt.nl:nfsd mythm.romunt.nl:1020 CLOSE_WAIT tcp 0 0 repeater.romunt.n:53854 mythm.romunt.nl:6544 FIN_WAIT2
Cheers,
Rudy
Quoted 39 lines · Rudy Zijlstra
Op maandag 13-04-2009 om 21:25 uur [tijdzone +0200], schreef Rudy Zijlstra:
Quoted 29 lines
Op maandag 13-04-2009 om 13:08 uur [tijdzone -0400], schreef Chuck Lever:
Quoted 17 lines · Daniel Stickney
Quoted 16 lines
Quoted 12 lines · On Mon, 13 Apr 2009 12:12:47 -0400 Chuck Lever <[email protected]> wrote:
Quoted 11 lines · Daniel Stickney
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
demand. The timing of the hangs as noted by the timestamp in
/var/log/messages varies. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few clien ts have their mounts hang at the same exact time, but this is not consistent. In/var/log/messageswe seeQuoted 5 lines
OK, i'll switch to 2.6.30 on all clients once it is out. Prefer to wait for release, as they are production type machines.
If i get a hang, i'll check with "netstat --ip"
Just now one of my 2.6.28.7 machines is hanging.
netstat results in client status:
Quoted 8 lines
tcp 0 0 mythm.romunt.nl:1020 repeater.romunt.nl:nfsd FIN_WAIT2 tcp 76 0 mythm.romunt.nl:6544 repeater.romunt.n:53854 ESTABLISHEDand on the server i find:
tcp 1 0 repeater.romunt.nl:nfsd mythm.romunt.nl:1020 CLOSE_WAIT tcp 0 0 repeater.romunt.n:53854 mythm.romunt.nl:6544 FIN_WAIT2
Which shows that the NFS server is failing to close the tcp connection after the client has closed on its side.
You probably want to apply this patch to your server:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git&a=commitdiff&h=69b6ba3712b796a66595cfaf0a5ab4dfe1cf964a
Trond
Op dinsdag 14-04-2009 om 08:31 uur [tijdzone -0400], schreef Trond Myklebust:
Quoted 49 lines · Rudy Zijlstra
Quoted 39 lines
Op maandag 13-04-2009 om 21:25 uur [tijdzone +0200], schreef Rudy Zijlstra:
Quoted 29 lines
Op maandag 13-04-2009 om 13:08 uur [tijdzone -0400], schreef Chuck Lever:
Quoted 17 lines · Daniel Stickney
Quoted 16 lines
Quoted 12 lines · On Mon, 13 Apr 2009 12:12:47 -0400 Chuck Lever <[email protected]> wrote:
Quoted 11 lines · Daniel Stickney
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
demand. The timing of the hangs as noted by the timestamp in
/var/log/messages varies. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few clien ts have their mounts hang at the same exact time, but this is not consistent. In/var/log/messageswe seeQuoted 5 lines
OK, i'll switch to 2.6.30 on all clients once it is out. Prefer to wait for release, as they are production type machines.
If i get a hang, i'll check with "netstat --ip"
Just now one of my 2.6.28.7 machines is hanging.
netstat results in client status:Quoted 8 lines
tcp 0 0 mythm.romunt.nl:1020 repeater.romunt.nl:nfsd FIN_WAIT2 tcp 76 0 mythm.romunt.nl:6544 repeater.romunt.n:53854 ESTABLISHEDand on the server i find:
tcp 1 0 repeater.romunt.nl:nfsd mythm.romunt.nl:1020 CLOSE_WAIT tcp 0 0 repeater.romunt.n:53854 mythm.romunt.nl:6544 FIN_WAIT2
Quoted 9 lines
Which shows that the NFS server is failing to close the tcp connection after the client has closed on its side.
You probably want to apply this patch to your server:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git&a=commitdiff&h=69b6ba3712b796a66595cfaf0a5ab4dfe1cf964aTrond
Hi Trond
Thanks, would an upgrade to 2.6.29.1 also work?
Thanks,
Rudy
Quoted 58 lines · Rudy Zijlstra
Op dinsdag 14-04-2009 om 08:31 uur [tijdzone -0400], schreef Trond Myklebust:
Quoted 56 lines · Rudy Zijlstra
Quoted 39 lines
Op maandag 13-04-2009 om 21:25 uur [tijdzone +0200], schreef Rudy Zijlstra:
Quoted 29 lines
Op maandag 13-04-2009 om 13:08 uur [tijdzone -0400], schreef Chuck Lever:
Quoted 17 lines · Daniel Stickney
Quoted 16 lines
Quoted 12 lines · On Mon, 13 Apr 2009 12:12:47 -0400 Chuck Lever <[email protected]> wrote:
Quoted 11 lines · Daniel Stickney
Hi all,
I am investigating some NFS mount hangs that we have started to see over the past month on some of our servers. The behavior is that the client mount hangs and needs to be manually unmounted (forcefully with 'umount -f') and remounted to make it work. There are about 85 clients mounting a partition over NFS. About 50 of the clients are running Fedora Core 3 with kernel 2.6.11-1.27_FC3smp. Not one of these 50 has ever had this mount hang. The other 35 are CentOS 5.2 with kernel 2.6.27 which was compiled from source. The mount hangs are inconsistent and so far I don't know how to trigger them on
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
demand. The timing of the hangs as noted by the timestamp in
/var/log/messages varies. Not all of the 35 CentOS clients have their mounts hang at the same time, and the NFS server continues operating apparently normally for all other clients. Normally maybe 5 clients have a mount hang per week, on different days, mostly different times. Now and then we might see a cluster of a few clien ts have their mounts hang at the same exact time, but this is not consistent. In/var/log/messageswe seeQuoted 5 lines
OK, i'll switch to 2.6.30 on all clients once it is out. Prefer to wait for release, as they are production type machines.
If i get a hang, i'll check with "netstat --ip"
Just now one of my 2.6.28.7 machines is hanging.
netstat results in client status:Quoted 8 lines
tcp 0 0 mythm.romunt.nl:1020 repeater.romunt.nl:nfsd FIN_WAIT2 tcp 76 0 mythm.romunt.nl:6544 repeater.romunt.n:53854 ESTABLISHEDand on the server i find:
tcp 1 0 repeater.romunt.nl:nfsd mythm.romunt.nl:1020 CLOSE_WAIT tcp 0 0 repeater.romunt.n:53854 mythm.romunt.nl:6544 FIN_WAIT2Which shows that the NFS server is failing to close the tcp connection after the client has closed on its side.
You probably want to apply this patch to your server:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git&a=commitdiff&h=69b6ba3712b796a66595cfaf0a5ab4dfe1cf964a
Quoted 6 lines
Quoted 2 lines
Trond
Hi Trond
Thanks, would an upgrade to 2.6.29.1 also work?
Yes. That same patch should also be in 2.6.29.
Cheers
Trond
Quoted 13 lines · Bryan McLellan
Quoted 1 line · Daniel Stickney
To add a little more info, in a post on April 10th titled "NFSv3 Client Timeout on 2.6.27" Bryan mentioned that his client socket was in state
FIN_WAIT2, and server inCLOSE_WAIT, which is exactly what I am seeing here.Since my problems originated after upgrading to Ubuntu intrepid in a 'etch -> hardy -> intrepid' cycle, and hardy contained 2.6.24, I wonder if the regression was in:
commit
e06799f958bf7f9f8fae15f0c6f519953fb0257cAuthor: Trond Myklebust <[email protected]> Date: Mon Nov 5 15:44:12 2007 -0500SUNRPC: Use
shutdown()instead ofclose()when disconnecting a TCP socket
Quoted 7 lines
By using
shutdown()rather thanclose()we allow the RPC client to wait for the TCP close handshake to complete before we start trying to reconnect using the same port.
We useshutdown(SHUT_WR)only instead of shutting down both directions, however we wait until the server has closed the connection on its side.Signed-off-by Trond Myklebust <[email protected]>
Hi,
probably yes, I have several other problems with this. See my previous post about lockd issues and DoS on server by repeating clients. Last info is, that Trond knows about the DoS problem and when this is solved I will try to do everything I can to solve the lockd problem. I need to stay with 2.6.27 so it is crucial for me to solve all these.
Bye
Signature · 7 lines
Tomas Kasparek, PhD student E-mail: [email protected] CVT FIT VUT Brno, L127 Web: http://www.fit.vutbr.cz/~kasparek Bozetechova 1, 612 66 Fax: +420 54114-1270 Brno, Czech Republic Phone: +420 54114-1220 jabber: [email protected] GPG: 2F1E 1AAF FD3B CFA3 1537 63BD DCBE 18FF A035 53BC