Skip to contentSkip to conversation

s390 patches for 2.6.30-rc1

PATCH In review Martin Schwidefsky 2 participants 16 messages Apr 14, 2009 – Apr 15, 2009

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

cover s390 patches for 2.6.30-rc1

Greetings,
the usual bug fixes for an -rc release and some cpu time accouting improvements. Nothing major, the shortlog:

Christian Ehrhardt (1):
[S390] s390: move machine flags to lowcore

Cornelia Huck (1):
[S390] dasd: Use the new async framework for autoonlining.

Gerald Schaefer (1):
[S390] appldata: Use new mod_virt_timer_periodic() function.

Heiko Carstens (3):
[S390] wire up preadv/pwritev system calls [S390] call nmi_enter/nmi_exit on machine checks [S390] smp: fix cpu_possible_map initialization

Jan Glauber (2):
[S390] extend virtual timer interface by mod_virt_timer_periodic [S390] qdio: remove dead timeout handler

Martin Schwidefsky (5):
[S390] stp synchronization retry timer
[S390] fix idle time accounting
[S390] cpu hotplug and accounting values
[S390] add read_persistent_clock
[S390] boot cputime accounting

Stefan Weinhuber (1):
[S390] dasd: fix idaw boundary checking for track based ccw

Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#1 lore raw

PATCH 1/14 s390: move machine flags to lowcore

From: Christian Ehrhardt <[email protected]>

Currently the storage of the machine flags is a globally exported unsigned long long variable. By moving the storage location into the lowcore struct we allow assembler code to check machine_flags directly even without needing a register. Addtionally the lowcore and therefore the machine flags too will be in cache most of the time.

---

 arch/s390/include/asm/cpuid.h       |   25 +++++++++++++++++++++++++
 arch/s390/include/asm/kvm_host.h    |    1 +
 arch/s390/include/asm/lowcore.h     |   12 ++++++++----
 arch/s390/include/asm/processor.h   |   17 +++--------------
 arch/s390/include/asm/ptrace.h      |    2 --
 arch/s390/include/asm/setup.h       |   24 ++++++++++++------------
 arch/s390/include/asm/thread_info.h |    3 ++-
 arch/s390/kernel/early.c            |    3 +++
 arch/s390/kernel/setup.c            |    4 +---
 arch/s390/kernel/smp.c              |    1 +
 10 files changed, 56 insertions(+), 36 deletions(-)
arch/s390/include/asm/cpuid.h new file +25 -0
Index: quilt-2.6/arch/s390/include/asm/cpuid.h
===================================================================
@@ -0,0 +1,25 @@
+/*
+ *    Copyright IBM Corp. 2000,2009
+ *    Author(s): Hartmut Penner <[email protected]>,
+ *		 Martin Schwidefsky <[email protected]>
+ *		 Christian Ehrhardt <[email protected]>
+ */
+
+#ifndef _ASM_S390_CPUID_H_
+#define _ASM_S390_CPUID_H_
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+typedef struct
+{
+	unsigned int version :	8;
+	unsigned int ident   : 24;
+	unsigned int machine : 16;
+	unsigned int unused  : 16;
+} __attribute__ ((packed)) cpuid_t;
+
+#endif /* _ASM_S390_CPUID_H_ */
arch/s390/include/asm/kvm_host.h +1 -0
Index: quilt-2.6/arch/s390/include/asm/kvm_host.h
===================================================================
@@ -15,6 +15,7 @@
 #define ASM_KVM_HOST_H
 #include <linux/kvm_host.h>
 #include <asm/debug.h>
+#include <asm/cpuid.h>
 
 #define KVM_MAX_VCPUS 64
 #define KVM_MEMORY_SLOTS 32
arch/s390/include/asm/lowcore.h +8 -4
Index: quilt-2.6/arch/s390/include/asm/lowcore.h
===================================================================
@@ -66,6 +66,7 @@
 #define __LC_USER_EXEC_ASCE		0x02ac
 #define __LC_CPUID			0x02b0
 #define __LC_INT_CLOCK			0x02c8
+#define __LC_MACHINE_FLAGS		0x02d8
 #define __LC_IRB			0x0300
 #define __LC_PFAULT_INTPARM		0x0080
 #define __LC_CPU_TIMER_SAVE_AREA	0x00d8
@@ -110,6 +111,7 @@
 #define __LC_CPUID			0x0320
 #define __LC_INT_CLOCK			0x0340
 #define __LC_VDSO_PER_CPU		0x0350
+#define __LC_MACHINE_FLAGS		0x0358
 #define __LC_IRB			0x0380
 #define __LC_PASTE			0x03c0
 #define __LC_PFAULT_INTPARM		0x11b8
@@ -127,9 +129,9 @@
 
 #ifndef __ASSEMBLY__
 
-#include <asm/processor.h>
+#include <asm/cpuid.h>
+#include <asm/ptrace.h>
 #include <linux/types.h>
-#include <asm/sigp.h>
 
 void restart_int_handler(void);
 void ext_int_handler(void);
@@ -277,7 +279,8 @@ struct _lowcore
 	__u32	ext_call_fast;			/* 0x02c4 */
 	__u64	int_clock;			/* 0x02c8 */
 	__u64	clock_comparator;		/* 0x02d0 */
-	__u8	pad_0x02d8[0x0300-0x02d8];	/* 0x02d8 */
+	__u32	machine_flags;			/* 0x02d8 */
+	__u8	pad_0x02dc[0x0300-0x02dc];	/* 0x02dc */
 
 	/* Interrupt response block */
 	__u8	irb[64];			/* 0x0300 */
@@ -381,7 +384,8 @@ struct _lowcore
 	__u64	int_clock;			/* 0x0340 */
 	__u64	clock_comparator;		/* 0x0348 */
 	__u64	vdso_per_cpu_data;		/* 0x0350 */
-	__u8	pad_0x0358[0x0380-0x0358];	/* 0x0358 */
+	__u64	machine_flags;			/* 0x0358 */
+	__u8	pad_0x0360[0x0380-0x0360];	/* 0x0360 */
 
 	/* Interrupt response block. */
 	__u8	irb[64];			/* 0x0380 */
arch/s390/include/asm/processor.h +3 -14
Index: quilt-2.6/arch/s390/include/asm/processor.h
===================================================================
@@ -14,7 +14,10 @@
 #define __ASM_S390_PROCESSOR_H
 
 #include <linux/linkage.h>
+#include <asm/cpuid.h>
+#include <asm/page.h>
 #include <asm/ptrace.h>
+#include <asm/setup.h>
 
 #ifdef __KERNEL__
 /*
@@ -23,20 +26,6 @@
  */
 #define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
 
-/*
- *  CPU type and hardware bug flags. Kept separately for each CPU.
- *  Members of this structure are referenced in head.S, so think twice
- *  before touching them. [mj]
- */
-
-typedef struct
-{
-        unsigned int version :  8;
-        unsigned int ident   : 24;
-        unsigned int machine : 16;
-        unsigned int unused  : 16;
-} __attribute__ ((packed)) cpuid_t;
-
 static inline void get_cpu_id(cpuid_t *ptr)
 {
 	asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
arch/s390/include/asm/ptrace.h +0 -2
Index: quilt-2.6/arch/s390/include/asm/ptrace.h
===================================================================
@@ -313,8 +313,6 @@ typedef struct
 
 
 #ifdef __KERNEL__
-#include <asm/setup.h>
-#include <asm/page.h>
 
 /*
  * The pt_regs struct defines the way the registers are stored on
arch/s390/include/asm/setup.h +12 -12
Index: quilt-2.6/arch/s390/include/asm/setup.h
===================================================================
@@ -14,6 +14,7 @@
 
 #ifdef __KERNEL__
 
+#include <asm/lowcore.h>
 #include <asm/types.h>
 
 #define PARMAREA		0x10400
@@ -63,7 +64,6 @@ extern unsigned int s390_noexec;
 /*
  * Machine features detected in head.S
  */
-extern unsigned long machine_flags;
 
 #define MACHINE_FLAG_VM		(1UL << 0)
 #define MACHINE_FLAG_IEEE	(1UL << 1)
@@ -77,28 +77,28 @@ extern unsigned long machine_flags;
 #define MACHINE_FLAG_HPAGE	(1UL << 10)
 #define MACHINE_FLAG_PFMF	(1UL << 11)
 
-#define MACHINE_IS_VM		(machine_flags & MACHINE_FLAG_VM)
-#define MACHINE_IS_KVM		(machine_flags & MACHINE_FLAG_KVM)
-#define MACHINE_HAS_DIAG9C	(machine_flags & MACHINE_FLAG_DIAG9C)
+#define MACHINE_IS_VM		(S390_lowcore.machine_flags & MACHINE_FLAG_VM)
+#define MACHINE_IS_KVM		(S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
+#define MACHINE_HAS_DIAG9C	(S390_lowcore.machine_flags & MACHINE_FLAG_DIAG9C)
 
 #ifndef __s390x__
-#define MACHINE_HAS_IEEE	(machine_flags & MACHINE_FLAG_IEEE)
-#define MACHINE_HAS_CSP		(machine_flags & MACHINE_FLAG_CSP)
+#define MACHINE_HAS_IEEE	(S390_lowcore.machine_flags & MACHINE_FLAG_IEEE)
+#define MACHINE_HAS_CSP		(S390_lowcore.machine_flags & MACHINE_FLAG_CSP)
 #define MACHINE_HAS_IDTE	(0)
 #define MACHINE_HAS_DIAG44	(1)
-#define MACHINE_HAS_MVPG	(machine_flags & MACHINE_FLAG_MVPG)
+#define MACHINE_HAS_MVPG	(S390_lowcore.machine_flags & MACHINE_FLAG_MVPG)
 #define MACHINE_HAS_MVCOS	(0)
 #define MACHINE_HAS_HPAGE	(0)
 #define MACHINE_HAS_PFMF	(0)
 #else /* __s390x__ */
 #define MACHINE_HAS_IEEE	(1)
 #define MACHINE_HAS_CSP		(1)
-#define MACHINE_HAS_IDTE	(machine_flags & MACHINE_FLAG_IDTE)
-#define MACHINE_HAS_DIAG44	(machine_flags & MACHINE_FLAG_DIAG44)
+#define MACHINE_HAS_IDTE	(S390_lowcore.machine_flags & MACHINE_FLAG_IDTE)
+#define MACHINE_HAS_DIAG44	(S390_lowcore.machine_flags & MACHINE_FLAG_DIAG44)
 #define MACHINE_HAS_MVPG	(1)
-#define MACHINE_HAS_MVCOS	(machine_flags & MACHINE_FLAG_MVCOS)
-#define MACHINE_HAS_HPAGE	(machine_flags & MACHINE_FLAG_HPAGE)
-#define MACHINE_HAS_PFMF	(machine_flags & MACHINE_FLAG_PFMF)
+#define MACHINE_HAS_MVCOS	(S390_lowcore.machine_flags & MACHINE_FLAG_MVCOS)
+#define MACHINE_HAS_HPAGE	(S390_lowcore.machine_flags & MACHINE_FLAG_HPAGE)
+#define MACHINE_HAS_PFMF	(S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
 #endif /* __s390x__ */
 
 #define ZFCPDUMP_HSA_SIZE	(32UL<<20)
arch/s390/include/asm/thread_info.h +2 -1
Index: quilt-2.6/arch/s390/include/asm/thread_info.h
===================================================================
@@ -31,8 +31,9 @@
 #define ASYNC_SIZE  (PAGE_SIZE << ASYNC_ORDER)
 
 #ifndef __ASSEMBLY__
-#include <asm/processor.h>
 #include <asm/lowcore.h>
+#include <asm/page.h>
+#include <asm/processor.h>
 
 /*
  * low level task data that entry.S needs immediate access to
arch/s390/kernel/early.c +3 -0
Index: quilt-2.6/arch/s390/kernel/early.c
===================================================================
@@ -34,6 +34,8 @@
 
 char kernel_nss_name[NSS_NAME_SIZE + 1];
 
+static unsigned long machine_flags;
+
 static void __init setup_boot_command_line(void);
 
 
@@ -391,5 +393,6 @@ void __init startup_init(void)
 	setup_hpage();
 	sclp_facilities_detect();
 	detect_memory_layout(memory_chunk);
+	S390_lowcore.machine_flags = machine_flags;
 	lockdep_on();
 }
arch/s390/kernel/setup.c +1 -3
Index: quilt-2.6/arch/s390/kernel/setup.c
===================================================================
@@ -82,9 +82,6 @@ EXPORT_SYMBOL(console_devno);
 unsigned int console_irq = -1;
 EXPORT_SYMBOL(console_irq);
 
-unsigned long machine_flags;
-EXPORT_SYMBOL(machine_flags);
-
 unsigned long elf_hwcap = 0;
 char elf_platform[ELF_PLATFORM_SIZE];
 
@@ -426,6 +423,7 @@ setup_lowcore(void)
 		__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE;
 	lc->current_task = (unsigned long) init_thread_union.thread_info.task;
 	lc->thread_info = (unsigned long) &init_thread_union;
+	lc->machine_flags = S390_lowcore.machine_flags;
 #ifndef CONFIG_64BIT
 	if (MACHINE_HAS_IEEE) {
 		lc->extended_save_area_addr = (__u32)
arch/s390/kernel/smp.c +1 -0
Index: quilt-2.6/arch/s390/kernel/smp.c
===================================================================
@@ -571,6 +571,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	cpu_lowcore->current_task = (unsigned long) idle;
 	cpu_lowcore->cpu_nr = cpu;
 	cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce;
+	cpu_lowcore->machine_flags = S390_lowcore.machine_flags;
 	eieio();
 
 	while (signal_processor(cpu, sigp_restart) == sigp_busy)
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#2 lore raw

PATCH 2/14 wire up preadv/pwritev system calls

In reply to Martin Schwidefsky

From: Heiko Carstens <[email protected]>

---

 arch/s390/include/asm/unistd.h    |    4 +++-
 arch/s390/kernel/compat_wrapper.S |   18 ++++++++++++++++++
 arch/s390/kernel/syscalls.S       |    2 ++
 3 files changed, 23 insertions(+), 1 deletion(-)
arch/s390/include/asm/unistd.h +3 -1
Index: quilt-2.6/arch/s390/include/asm/unistd.h
===================================================================
@@ -265,7 +265,9 @@
 #define __NR_pipe2		325
 #define __NR_dup3		326
 #define __NR_epoll_create1	327
-#define NR_syscalls 328
+#define	__NR_preadv		328
+#define	__NR_pwritev		329
+#define NR_syscalls 330
 
 /* 
  * There are some system calls that are not present on 64 bit, some
arch/s390/kernel/compat_wrapper.S +18 -0
Index: quilt-2.6/arch/s390/kernel/compat_wrapper.S
===================================================================
@@ -1805,3 +1805,21 @@ compat_sys_keyctl_wrapper:
 	llgfr	%r5,%r5			# u32
 	llgfr	%r6,%r6			# u32
 	jg	compat_sys_keyctl	# branch to system call
+
+	.globl	compat_sys_preadv_wrapper
+compat_sys_preadv_wrapper:
+	llgfr	%r2,%r2			# unsigned long
+	llgtr	%r3,%r3			# compat_iovec *
+	llgfr	%r4,%r4			# unsigned long
+	llgfr	%r5,%r5			# u32
+	llgfr	%r6,%r6			# u32
+	jg	compat_sys_preadv	# branch to system call
+
+	.globl	compat_sys_pwritev_wrapper
+compat_sys_pwritev_wrapper:
+	llgfr	%r2,%r2			# unsigned long
+	llgtr	%r3,%r3			# compat_iovec *
+	llgfr	%r4,%r4			# unsigned long
+	llgfr	%r5,%r5			# u32
+	llgfr	%r6,%r6			# u32
+	jg	compat_sys_pwritev	# branch to system call
arch/s390/kernel/syscalls.S +2 -0
Index: quilt-2.6/arch/s390/kernel/syscalls.S
===================================================================
@@ -336,3 +336,5 @@ SYSCALL(sys_inotify_init1,sys_inotify_in
 SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
 SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
 SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
+SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper)
+SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#3 lore raw

PATCH 3/14 call nmi_enter/nmi_exit on machine checks

In reply to Martin Schwidefsky

From: Heiko Carstens <[email protected]>

nmi_enter/nmi_exit includes the lockdep calls and various other calls which were missing so far.

---

 arch/s390/kernel/nmi.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/s390/kernel/nmi.c +3 -2
Index: quilt-2.6/arch/s390/kernel/nmi.c
===================================================================
@@ -10,6 +10,7 @@
 
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/hardirq.h>
 #include <linux/time.h>
 #include <linux/module.h>
 #include <asm/lowcore.h>
@@ -253,7 +254,7 @@ void notrace s390_do_machine_check(struc
 	struct mci *mci;
 	int umode;
 
-	lockdep_off();
+	nmi_enter();
 	s390_idle_check();
 
 	mci = (struct mci *) &S390_lowcore.mcck_interruption_code;
@@ -363,7 +364,7 @@ void notrace s390_do_machine_check(struc
 		mcck->warning = 1;
 		set_thread_flag(TIF_MCCK_PENDING);
 	}
-	lockdep_on();
+	nmi_exit();
 }
 
 static int __init machine_check_init(void)
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#4 lore raw

PATCH 4/14 stp synchronization retry timer

In reply to Martin Schwidefsky

From: Martin Schwidefsky <[email protected]>

Add a timer that retries the clock synchronization via the server time protocol if there is a usable clock but the synchronization failed.

---

 arch/s390/kernel/time.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)
arch/s390/kernel/time.c +15 -0
Index: quilt-2.6/arch/s390/kernel/time.c
===================================================================
@@ -1423,6 +1423,7 @@ static void *stp_page;
 static void stp_work_fn(struct work_struct *work);
 static DEFINE_MUTEX(stp_work_mutex);
 static DECLARE_WORK(stp_work, stp_work_fn);
+static struct timer_list stp_timer;
 
 static int __init early_parse_stp(char *p)
 {
@@ -1454,10 +1455,16 @@ static void __init stp_reset(void)
 	}
 }
 
+static void stp_timeout(unsigned long dummy)
+{
+	queue_work(time_sync_wq, &stp_work);
+}
+
 static int __init stp_init(void)
 {
 	if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
 		return 0;
+	setup_timer(&stp_timer, stp_timeout, 0UL);
 	time_init_wq();
 	if (!stp_online)
 		return 0;
@@ -1565,6 +1572,7 @@ static void stp_work_fn(struct work_stru
 
 	if (!stp_online) {
 		chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
+		del_timer_sync(&stp_timer);
 		goto out_unlock;
 	}
 
@@ -1586,6 +1594,13 @@ static void stp_work_fn(struct work_stru
 	stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map);
 	put_online_cpus();
 
+	if (!check_sync_clock())
+		/*
+		 * There is a usable clock but the synchonization failed.
+		 * Retry after a second.
+		 */
+		mod_timer(&stp_timer, jiffies + HZ);
+
 out_unlock:
 	mutex_unlock(&stp_work_mutex);
 }
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#5 lore raw

PATCH 5/14 extend virtual timer interface by mod_virt_timer_periodic

In reply to Martin Schwidefsky

From: Jan Glauber <[email protected]>

In case mod_virt_timer is used to add a non pending timer the timer is always added as a one-shot timer. If mod_virt_timer is used for periodic timers they may therfore be degraded to one-shot timers.

Add mod_virt_timer_periodic to the interface to allow safe re-programming of the interval value.

---

 arch/s390/include/asm/timer.h |    1 
 arch/s390/kernel/vtime.c      |   57 ++++++++++++++++++++++++------------------
 2 files changed, 34 insertions(+), 24 deletions(-)
arch/s390/include/asm/timer.h +1 -0
Index: quilt-2.6/arch/s390/include/asm/timer.h
===================================================================
@@ -41,6 +41,7 @@ extern void init_virt_timer(struct vtime
 extern void add_virt_timer(void *new);
 extern void add_virt_timer_periodic(void *new);
 extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires);
+extern int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires);
 extern int del_virt_timer(struct vtimer_list *timer);
 
 extern void init_cpu_vtimer(void);
arch/s390/kernel/vtime.c +33 -24

98 lines not on this page · raw message

Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#6 lore raw

PATCH 6/14 appldata: Use new mod_virt_timer_periodic() function.

In reply to Martin Schwidefsky

From: Gerald Schaefer <[email protected]>

mod_virt_timer() was used to modify/add cpu timers for cpus that were set online. This resulted in a one-shot timer for every cpu that was newly added or previously set offline, instead of an interval timer, which broke the appldata vtime interval setup.

To fix this, the new mod_virt_timer_periodic() function is used, which adds interval timers instead of one-shot timers.

---

 arch/s390/appldata/appldata_base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/s390/appldata/appldata_base.c +1 -1
Index: quilt-2.6/arch/s390/appldata/appldata_base.c
===================================================================
@@ -176,7 +176,7 @@ static void __appldata_mod_vtimer_wrap(v
 		struct vtimer_list *timer;
 		u64    expires;
 	} *args = p;
-	mod_virt_timer(args->timer, args->expires);
+	mod_virt_timer_periodic(args->timer, args->expires);
 }
 
 #define APPLDATA_ADD_TIMER	0
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#7 lore raw

PATCH 7/14 qdio: remove dead timeout handler

In reply to Martin Schwidefsky

From: Jan Glauber <[email protected]>

The QDIO ccw devices are started by ccw_device_start so no timeout can occur for the interrupt handler. Remove the dead code.

In case of an I/O error set the device state to error and wake up a possibly running qdio_shutdown waiter.

---

 drivers/s390/cio/qdio_main.c |   43 ++-----------------------------------------
 1 file changed, 2 insertions(+), 41 deletions(-)
drivers/s390/cio/qdio_main.c +2 -41
Index: quilt-2.6/drivers/s390/cio/qdio_main.c
===================================================================
@@ -881,42 +881,6 @@ no_handler:
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
 }
 
-static void qdio_call_shutdown(struct work_struct *work)
-{
-	struct ccw_device_private *priv;
-	struct ccw_device *cdev;
-
-	priv = container_of(work, struct ccw_device_private, kick_work);
-	cdev = priv->cdev;
-	qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
-	put_device(&cdev->dev);
-}
-
-static void qdio_int_error(struct ccw_device *cdev)
-{
-	struct qdio_irq *irq_ptr = cdev->private->qdio_data;
-
-	switch (irq_ptr->state) {
-	case QDIO_IRQ_STATE_INACTIVE:
-	case QDIO_IRQ_STATE_CLEANUP:
-		qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
-		break;
-	case QDIO_IRQ_STATE_ESTABLISHED:
-	case QDIO_IRQ_STATE_ACTIVE:
-		qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
-		if (get_device(&cdev->dev)) {
-			/* Can't call shutdown from interrupt context. */
-			PREPARE_WORK(&cdev->private->kick_work,
-				     qdio_call_shutdown);
-			queue_work(ccw_device_work, &cdev->private->kick_work);
-		}
-		break;
-	default:
-		WARN_ON(1);
-	}
-	wake_up(&cdev->private->wait_q);
-}
-
 static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat,
 				       int dstat)
 {
@@ -973,10 +937,8 @@ void qdio_int_handler(struct ccw_device 
 		switch (PTR_ERR(irb)) {
 		case -EIO:
 			DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no);
-			return;
-		case -ETIMEDOUT:
-			DBF_ERROR("%4x IO timeout", irq_ptr->schid.sch_no);
-			qdio_int_error(cdev);
+			qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
+			wake_up(&cdev->private->wait_q);
 			return;
 		default:
 			WARN_ON(1);
@@ -1001,7 +963,6 @@ void qdio_int_handler(struct ccw_device 
 	case QDIO_IRQ_STATE_ACTIVE:
 		if (cstat & SCHN_STAT_PCI) {
 			qdio_int_handler_pci(irq_ptr);
-			/* no state change so no need to wake up wait_q */
 			return;
 		}
 		if ((cstat & ~SCHN_STAT_PCI) || dstat) {
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#8 lore raw

PATCH 8/14 dasd: Use the new async framework for autoonlining.

In reply to Martin Schwidefsky

From: Cornelia Huck <[email protected]>

The dasd driver can automatically online detected dasds, which especially important for finding the root device. Currently, it will wait for each online operation to finish individually, which may take long if many dasds need to be onlined. When using the new async framework, these onlining operations can run in parallel and presence of the root device is ensured by the fact that prepare_namespace() waits for all async threads to finish.

---

 drivers/s390/block/dasd.c |   37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)
drivers/s390/block/dasd.c +25 -12
Index: quilt-2.6/drivers/s390/block/dasd.c
===================================================================
@@ -20,6 +20,7 @@
 #include <linux/slab.h>
 #include <linux/buffer_head.h>
 #include <linux/hdreg.h>
+#include <linux/async.h>
 
 #include <asm/ccwdev.h>
 #include <asm/ebcdic.h>
@@ -480,8 +481,10 @@ static void dasd_change_state(struct das
         if (rc && rc != -EAGAIN)
                 device->target = device->state;
 
-	if (device->state == device->target)
+	if (device->state == device->target) {
 		wake_up(&dasd_init_waitq);
+		dasd_put_device(device);
+	}
 
 	/* let user-space know that the device status changed */
 	kobject_uevent(&device->cdev->dev.kobj, KOBJ_CHANGE);
@@ -513,12 +516,15 @@ void dasd_kick_device(struct dasd_device
  */
 void dasd_set_target_state(struct dasd_device *device, int target)
 {
+	dasd_get_device(device);
 	/* If we are in probeonly mode stop at DASD_STATE_READY. */
 	if (dasd_probeonly && target > DASD_STATE_READY)
 		target = DASD_STATE_READY;
 	if (device->target != target) {
-                if (device->state == target)
+		if (device->state == target) {
 			wake_up(&dasd_init_waitq);
+			dasd_put_device(device);
+		}
 		device->target = target;
 	}
 	if (device->state != device->target)
@@ -2148,6 +2154,22 @@ dasd_exit(void)
  * SECTION: common functions for ccw_driver use
  */
 
+static void dasd_generic_auto_online(void *data, async_cookie_t cookie)
+{
+	struct ccw_device *cdev = data;
+	int ret;
+
+	ret = ccw_device_set_online(cdev);
+	if (ret)
+		pr_warning("%s: Setting the DASD online failed with rc=%d\n",
+			   dev_name(&cdev->dev), ret);
+	else {
+		struct dasd_device *device = dasd_device_from_cdev(cdev);
+		wait_event(dasd_init_waitq, _wait_for_device(device));
+		dasd_put_device(device);
+	}
+}
+
 /*
  * Initial attempt at a probe function. this can be simplified once
  * the other detection code is gone.
@@ -2180,10 +2202,7 @@ int dasd_generic_probe(struct ccw_device
 	 */
 	if ((dasd_get_feature(cdev, DASD_FEATURE_INITIAL_ONLINE) > 0 ) ||
 	    (dasd_autodetect && dasd_busid_known(dev_name(&cdev->dev)) != 0))
-		ret = ccw_device_set_online(cdev);
-	if (ret)
-		pr_warning("%s: Setting the DASD online failed with rc=%d\n",
-		       dev_name(&cdev->dev), ret);
+		async_schedule(dasd_generic_auto_online, cdev);
 	return 0;
 }
 
@@ -2290,13 +2309,7 @@ int dasd_generic_set_online(struct ccw_d
 	} else
 		pr_debug("dasd_generic device %s found\n",
 				dev_name(&cdev->dev));
-
-	/* FIXME: we have to wait for the root device but we don't want
-	 * to wait for each single device but for all at once. */
-	wait_event(dasd_init_waitq, _wait_for_device(device));
-
 	dasd_put_device(device);
-
 	return rc;
 }
 
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#9 lore raw

PATCH 9/14 dasd: fix idaw boundary checking for track based ccw

In reply to Martin Schwidefsky

From: Stefan Weinhuber <[email protected]>

A ccw command that reads or writes several records at once will usually transfer more data then fits into one page and needs to address memory areas using a list of indirect data address words (idaw). All but the first of these areas must start on a 4KB or 2KB block boundary (depending on the idaw format).
A check for this restriction was missing and has been added with this patch.

---

 drivers/s390/block/dasd_eckd.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/s390/block/dasd_eckd.c +12 -4
Index: quilt-2.6/drivers/s390/block/dasd_eckd.c
===================================================================
@@ -2019,15 +2019,23 @@ static struct dasd_ccw_req *dasd_eckd_bu
 				ccw++;
 				recid += count;
 				new_track = 0;
+				/* first idaw for a ccw may start anywhere */
+				if (!idaw_dst)
+					idaw_dst = dst;
 			}
-			/* If we start a new idaw, everything is fine and the
-			 * start of the new idaw is the start of this segment.
+			/* If we start a new idaw, we must make sure that it
+			 * starts on an IDA_BLOCK_SIZE boundary.
 			 * If we continue an idaw, we must make sure that the
 			 * current segment begins where the so far accumulated
 			 * idaw ends
 			 */
-			if (!idaw_dst)
-				idaw_dst = dst;
+			if (!idaw_dst) {
+				if (__pa(dst) & (IDA_BLOCK_SIZE-1)) {
+					dasd_sfree_request(cqr, startdev);
+					return ERR_PTR(-ERANGE);
+				} else
+					idaw_dst = dst;
+			}
 			if ((idaw_dst + idaw_len) != dst) {
 				dasd_sfree_request(cqr, startdev);
 				return ERR_PTR(-ERANGE);
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#10 lore raw

PATCH 10/14 smp: fix cpu_possible_map initialization

In reply to Martin Schwidefsky

From: Heiko Carstens <[email protected]>

The cpu_possible_map by default is initialized with all ones in s390. If the kernel paramert possible_cpus=<x> is passed the cpu_possible_map is supposed to have x bits set.
However the current code just sets the x bits without clearing the NR_CPUS bits that were already set. So we end up with an unchanged map that has all bits set.
To fix this just clear the map before setting any new bits.

This broke with def6cfb70bab83c0094bc0cedd27c4eda563043e "[S390] cpumask: Use accessors code."

---

 arch/s390/kernel/smp.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/s390/kernel/smp.c +2 -1
Index: quilt-2.6/arch/s390/kernel/smp.c
===================================================================
@@ -591,7 +591,8 @@ static int __init setup_possible_cpus(ch
 	int pcpus, cpu;
 
 	pcpus = simple_strtoul(s, NULL, 0);
-	for (cpu = 0; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
+	init_cpu_possible(cpumask_of(0));
+	for (cpu = 1; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
 		set_cpu_possible(cpu, true);
 	return 0;
 }
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#12 lore raw

PATCH 11/14 fix idle time accounting

In reply to Martin Schwidefsky

From: Martin Schwidefsky <[email protected]>

The steal time is calculated by subtracting the time the virtual cpu has been running on a physical cpu from the wall clock time. To make that work all wall time needs to be added to the steal time field first before the virtual cpu time is subtracted.

The time between the last clock update and the load of the enabled wait psw needs to be added to the steal_time field as well to make the sum over all cpu accounting numbers match the wall clock.

---

 arch/s390/kernel/vtime.c |    2 ++
 1 file changed, 2 insertions(+)
arch/s390/kernel/vtime.c +2 -0
Index: quilt-2.6/arch/s390/kernel/vtime.c
===================================================================
@@ -134,6 +134,8 @@ void vtime_start_cpu(void)
 	/* Account time spent with enabled wait psw loaded as idle time. */
 	idle_time = S390_lowcore.int_clock - idle->idle_enter;
 	account_idle_time(idle_time);
+	S390_lowcore.steal_timer +=
+		idle->idle_enter - S390_lowcore.last_update_clock;
 	S390_lowcore.last_update_clock = S390_lowcore.int_clock;
 
 	/* Account system time spent going idle. */
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#13 lore raw

PATCH 12/14 cpu hotplug and accounting values

In reply to Martin Schwidefsky

From: Martin Schwidefsky <[email protected]>

Reset the cpu timer to the maximum value and correctly initialize the cpu accounting values in the lowcore when the cpu is started.

---

 arch/s390/kernel/asm-offsets.c |    2 ++
 arch/s390/kernel/entry.S       |   13 +++++++++++++
 arch/s390/kernel/entry64.S     |   13 +++++++++++++
 3 files changed, 28 insertions(+)
arch/s390/kernel/asm-offsets.c +2 -0
Index: quilt-2.6/arch/s390/kernel/asm-offsets.c
===================================================================
@@ -27,6 +27,8 @@ int main(void)
 	DEFINE(__TI_flags, offsetof(struct thread_info, flags));
 	DEFINE(__TI_cpu, offsetof(struct thread_info, cpu));
 	DEFINE(__TI_precount, offsetof(struct thread_info, preempt_count));
+	DEFINE(__TI_user_timer, offsetof(struct thread_info, user_timer));
+	DEFINE(__TI_system_timer, offsetof(struct thread_info, system_timer));
 	BLANK();
 	DEFINE(__PT_ARGS, offsetof(struct pt_regs, args));
 	DEFINE(__PT_PSW, offsetof(struct pt_regs, psw));
arch/s390/kernel/entry64.S +13 -0
Index: quilt-2.6/arch/s390/kernel/entry64.S
===================================================================
@@ -831,14 +831,27 @@ mcck_return:
 	__CPUINIT
 	.globl restart_int_handler
 restart_int_handler:
+	basr	%r1,0
+restart_base:
+	spt	restart_vtime-restart_base(%r1)
+	stck	__LC_LAST_UPDATE_CLOCK
+	mvc	__LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
+	mvc	__LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
 	lg	%r15,__LC_SAVE_AREA+120 # load ksp
 	lghi	%r10,__LC_CREGS_SAVE_AREA
 	lctlg	%c0,%c15,0(%r10) # get new ctl regs
 	lghi	%r10,__LC_AREGS_SAVE_AREA
 	lam	%a0,%a15,0(%r10)
 	lmg	%r6,%r15,__SF_GPRS(%r15) # load registers from clone
+	lg	%r1,__LC_THREAD_INFO
+	mvc	__LC_USER_TIMER(8),__TI_user_timer(%r1)
+	mvc	__LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
+	xc	__LC_STEAL_TIMER(8),__LC_STEAL_TIMER
 	stosm	__SF_EMPTY(%r15),0x04	# now we can turn dat on
 	jg	start_secondary
+	.align	8
+restart_vtime:
+	.long	0x7fffffff,0xffffffff
 	.previous
 #else
 /*
arch/s390/kernel/entry.S +13 -0
Index: quilt-2.6/arch/s390/kernel/entry.S
===================================================================
@@ -837,16 +837,29 @@ mcck_return:
 	__CPUINIT
 	.globl restart_int_handler
 restart_int_handler:
+	basr	%r1,0
+restart_base:
+	spt	restart_vtime-restart_base(%r1)
+	stck	__LC_LAST_UPDATE_CLOCK
+	mvc	__LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
+	mvc	__LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
 	l	%r15,__LC_SAVE_AREA+60	# load ksp
 	lctl	%c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs
 	lam	%a0,%a15,__LC_AREGS_SAVE_AREA
 	lm	%r6,%r15,__SF_GPRS(%r15) # load registers from clone
+	l	%r1,__LC_THREAD_INFO
+	mvc	__LC_USER_TIMER(8),__TI_user_timer(%r1)
+	mvc	__LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
+	xc	__LC_STEAL_TIMER(8),__LC_STEAL_TIMER
 	stosm	__SF_EMPTY(%r15),0x04	# now we can turn dat on
 	basr	%r14,0
 	l	%r14,restart_addr-.(%r14)
 	br	%r14			# branch to start_secondary
 restart_addr:
 	.long	start_secondary
+	.align	8
+restart_vtime:
+	.long	0x7fffffff,0xffffffff
 	.previous
 #else
 /*
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#14 lore raw

PATCH 13/14 add read_persistent_clock

In reply to Martin Schwidefsky

From: Martin Schwidefsky <[email protected]>

Add a read_persistent_clock function that does not just return 0. Since timekeeping_init calls the function before time_init has been called move reset_tod_clock to early.c to make sure that the TOD clock is running when read_persistent_clock is invoked.

---

 arch/s390/include/asm/timex.h |    5 +++++
 arch/s390/kernel/early.c      |   16 ++++++++++++++++
 arch/s390/kernel/head.S       |    7 +++++--
 arch/s390/kernel/time.c       |   28 +++++++++-------------------
 4 files changed, 35 insertions(+), 21 deletions(-)
arch/s390/include/asm/timex.h +5 -0
Index: quilt-2.6/arch/s390/include/asm/timex.h
===================================================================
@@ -11,6 +11,9 @@
 #ifndef _ASM_S390_TIMEX_H
 #define _ASM_S390_TIMEX_H
 
+/* The value of the TOD clock for 1.1.1970. */
+#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
+
 /* Inline functions for clock register access. */
 static inline int set_clock(__u64 time)
 {
@@ -85,4 +88,6 @@ int get_sync_clock(unsigned long long *c
 void init_cpu_timer(void);
 unsigned long long monotonic_clock(void);
 
+extern u64 sched_clock_base_cc;
+
 #endif
arch/s390/kernel/early.c +16 -0
Index: quilt-2.6/arch/s390/kernel/early.c
===================================================================
@@ -38,6 +38,21 @@ static unsigned long machine_flags;
 
 static void __init setup_boot_command_line(void);
 
+/*
+ * Get the TOD clock running.
+ */
+static void __init reset_tod_clock(void)
+{
+	u64 time;
+
+	if (store_clock(&time) == 0)
+		return;
+	/* TOD clock not running. Set the clock to Unix Epoch. */
+	if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
+		disabled_wait(0);
+
+	sched_clock_base_cc = TOD_UNIX_EPOCH;
+}
 
 #ifdef CONFIG_SHARED_KERNEL
 int __init savesys_ipl_nss(char *cmd, const int cmdlen);
@@ -372,6 +387,7 @@ static void __init setup_boot_command_li
  */
 void __init startup_init(void)
 {
+	reset_tod_clock();
 	ipl_save_parameters();
 	rescue_initrd();
 	clear_bss_section();
arch/s390/kernel/head.S +5 -2
Index: quilt-2.6/arch/s390/kernel/head.S
===================================================================
@@ -471,6 +471,8 @@ startup:basr	%r13,0			# get base
 .LPG0:
 	xc	0x200(256),0x200	# partially clear lowcore
 	xc	0x300(256),0x300
+	l	%r1,5f-.LPG0(%r13)
+	stck	0(%r1)
 
 #ifndef CONFIG_MARCH_G5
 	# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
@@ -496,9 +498,10 @@ startup:basr	%r13,0			# get base
 	brct	%r0,0b
 #endif
 
-	l	%r13,0f-.LPG0(%r13)
+	l	%r13,4f-.LPG0(%r13)
 	b	0(%r13)
-0:	.long	startup_continue
+4:	.long	startup_continue
+5:	.long	sched_clock_base_cc
 
 #
 # params at 10400 (setup.h)
arch/s390/kernel/time.c +9 -19
Index: quilt-2.6/arch/s390/kernel/time.c
===================================================================
@@ -52,9 +52,6 @@
 #define USECS_PER_JIFFY     ((unsigned long) 1000000/HZ)
 #define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12)
 
-/* The value of the TOD clock for 1.1.1970. */
-#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
-
 /*
  * Create a small time difference between the timer interrupts
  * on the different cpus to avoid lock contention.
@@ -63,9 +60,10 @@
 
 #define TICK_SIZE tick
 
+u64 sched_clock_base_cc = -1;	/* Force to data section. */
+
 static ext_int_info_t ext_int_info_cc;
 static ext_int_info_t ext_int_etr_cc;
-static u64 sched_clock_base_cc;
 
 static DEFINE_PER_CPU(struct clock_event_device, comparators);
 
@@ -195,22 +193,12 @@ static void timing_alert_interrupt(__u16
 static void etr_reset(void);
 static void stp_reset(void);
 
-/*
- * Get the TOD clock running.
- */
-static u64 __init reset_tod_clock(void)
+unsigned long read_persistent_clock(void)
 {
-	u64 time;
+	struct timespec ts;
 
-	etr_reset();
-	stp_reset();
-	if (store_clock(&time) == 0)
-		return time;
-	/* TOD clock not running. Set the clock to Unix Epoch. */
-	if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
-		panic("TOD clock not operational.");
-
-	return TOD_UNIX_EPOCH;
+	tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, &ts);
+	return ts.tv_sec;
 }
 
 static cycle_t read_tod_clock(void)
@@ -265,7 +253,9 @@ void update_vsyscall_tz(void)
  */
 void __init time_init(void)
 {
-	sched_clock_base_cc = reset_tod_clock();
+	/* Reset time synchronization interfaces. */
+	etr_reset();
+	stp_reset();
 
 	/* set xtime */
 	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#15 lore raw

PATCH 14/14 boot cputime accounting

In reply to Martin Schwidefsky

From: Martin Schwidefsky <[email protected]>

Start the cpu time accounting very early to catch the cpu time spent for the initial kernel setup. To make the output of /proc/uptime match the sum of all cpu accounting values of the boot cpu reset xtime and wall_to_monotonic to sane values based on the TOD clock. The values set by timekeeping_init are off by up to a second.

---

 arch/s390/kernel/head.S  |    8 +++++++-
 arch/s390/kernel/setup.c |    8 ++++++++
 arch/s390/kernel/time.c  |   36 ++++++++++++++++++++++++++++--------
 arch/s390/kernel/vtime.c |    8 --------
 4 files changed, 43 insertions(+), 17 deletions(-)
arch/s390/kernel/head.S +7 -1
Index: quilt-2.6/arch/s390/kernel/head.S
===================================================================
@@ -473,7 +473,10 @@ startup:basr	%r13,0			# get base
 	xc	0x300(256),0x300
 	l	%r1,5f-.LPG0(%r13)
 	stck	0(%r1)
-
+	spt	6f-.LPG0(%r13)
+	mvc	__LC_LAST_UPDATE_CLOCK(8),0(%r1)
+	mvc	__LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
+	mvc	__LC_EXIT_TIMER(8),5f-.LPG0(%r13)
 #ifndef CONFIG_MARCH_G5
 	# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
 	stidp	__LC_CPUID		# store cpuid
@@ -500,8 +503,11 @@ startup:basr	%r13,0			# get base
 
 	l	%r13,4f-.LPG0(%r13)
 	b	0(%r13)
+	.align	4
 4:	.long	startup_continue
 5:	.long	sched_clock_base_cc
+	.align	8
+6:	.long	0x7fffffff,0xffffffff
 
 #
 # params at 10400 (setup.h)
arch/s390/kernel/setup.c +8 -0
Index: quilt-2.6/arch/s390/kernel/setup.c
===================================================================
@@ -434,6 +434,14 @@ setup_lowcore(void)
 #else
 	lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0];
 #endif
+	lc->sync_enter_timer = S390_lowcore.sync_enter_timer;
+	lc->async_enter_timer = S390_lowcore.async_enter_timer;
+	lc->exit_timer = S390_lowcore.exit_timer;
+	lc->user_timer = S390_lowcore.user_timer;
+	lc->system_timer = S390_lowcore.system_timer;
+	lc->steal_timer = S390_lowcore.steal_timer;
+	lc->last_update_timer = S390_lowcore.last_update_timer;
+	lc->last_update_clock = S390_lowcore.last_update_clock;
 	set_prefix((u32)(unsigned long) lc);
 	lowcore_ptr[0] = lc;
 }
arch/s390/kernel/time.c +28 -8
Index: quilt-2.6/arch/s390/kernel/time.c
===================================================================
@@ -253,32 +253,52 @@ void update_vsyscall_tz(void)
  */
 void __init time_init(void)
 {
+	struct timespec ts;
+	unsigned long flags;
+	cycle_t now;
+
 	/* Reset time synchronization interfaces. */
 	etr_reset();
 	stp_reset();
 
-	/* set xtime */
-	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
-        set_normalized_timespec(&wall_to_monotonic,
-                                -xtime.tv_sec, -xtime.tv_nsec);
-
 	/* request the clock comparator external interrupt */
 	if (register_early_external_interrupt(0x1004,
 					      clock_comparator_interrupt,
 					      &ext_int_info_cc) != 0)
                 panic("Couldn't request external interrupt 0x1004");
 
-	if (clocksource_register(&clocksource_tod) != 0)
-		panic("Could not register TOD clock source");
-
 	/* request the timing alert external interrupt */
 	if (register_early_external_interrupt(0x1406,
 					      timing_alert_interrupt,
 					      &ext_int_etr_cc) != 0)
 		panic("Couldn't request external interrupt 0x1406");
 
+	if (clocksource_register(&clocksource_tod) != 0)
+		panic("Could not register TOD clock source");
+
+	/*
+	 * The TOD clock is an accurate clock. The xtime should be
+	 * initialized in a way that the difference between TOD and
+	 * xtime is reasonably small. Too bad that timekeeping_init
+	 * sets xtime.tv_nsec to zero. In addition the clock source
+	 * change from the jiffies clock source to the TOD clock
+	 * source add another error of up to 1/HZ second. The same
+	 * function sets wall_to_monotonic to a value that is too
+	 * small for /proc/uptime to be accurate.
+	 * Reset xtime and wall_to_monotonic to sane values.
+	 */
+	write_seqlock_irqsave(&xtime_lock, flags);
+	now = get_clock();
+	tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime);
+	clocksource_tod.cycle_last = now;
+	clocksource_tod.raw_time = xtime;
+	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts);
+	set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec);
+	write_sequnlock_irqrestore(&xtime_lock, flags);
+
 	/* Enable TOD clock interrupts on the boot cpu. */
 	init_cpu_timer();
+
 	/* Enable cpu timer interrupts on the boot cpu. */
 	vtime_init();
 }
arch/s390/kernel/vtime.c +0 -8
Index: quilt-2.6/arch/s390/kernel/vtime.c
===================================================================
@@ -527,16 +527,8 @@ EXPORT_SYMBOL(del_virt_timer);
  */
 void init_cpu_vtimer(void)
 {
-	struct thread_info *ti = current_thread_info();
 	struct vtimer_queue *vq;
 
-	S390_lowcore.user_timer = ti->user_timer;
-	S390_lowcore.system_timer = ti->system_timer;
-
-	/* kick the virtual timer */
-	asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock));
-	asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer));
-
 	/* initialize per cpu vtimer structure */
 	vq = &__get_cpu_var(virt_cpu_timer);
 	INIT_LIST_HEAD(&vq->list);
Signature · 4 lines
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.
#11 lore raw

Re: [patch 10/14] smp: fix cpu_possible_map initialization

In reply to Martin Schwidefsky
Quoted 9 lines · Martin Schwidefsky

From: Heiko Carstens <[email protected]>

The cpu_possible_map by default is initialized with all ones in s390. If the kernel paramert possible_cpus=<x> is passed the cpu_possible_map is supposed to have x bits set.
However the current code just sets the x bits without clearing the NR_CPUS bits that were already set. So we end up with an unchanged map that has all bits set.
To fix this just clear the map before setting any new bits.

You're right; I created this patch back before I did the CONFIG_INIT_ALL_POSSIBLE patch.

It'd be nice to wean S390 off CONFIG_INIT_ALL_POSSIBLE, then there'd only be two (parisc and m32r). But it's a minor wart.

Thanks,
Rusty.