take 2: PCIe IO space multiplexing: Linux part: guestdev kernel paremeter enhance
Subsystems (2)
PATCH 3/5 take 2: PCIe IO space multiplexing: Linux part: guestdev kernel paremeter enhance
pci/guestdev: enhance guestdev to accept +iomul.
enhance guestdev to accept +iomul and use it.
Signed-off-by Isaku Yamahata <[email protected]>
Documentation/kernel-parameters.txt +6 -2
@@ -577,11 +577,15 @@ running once the system is up. guestdev= [PCI,ACPI] Format: {<device path>|<sbdf>}][,{<device path>|<sbdf>}[,...]] - Format of device path: <hid>[:<uid>]-<dev>.<func>[-<dev>.<func>[,...]] - Format of sbdf: [<segment>:]<bus>:<dev>.<func> + Format of device path: <hid>[:<uid>]-<dev>.<func>[-<dev>.<func>[,...]][+iomul] + Format of sbdf: [<segment>:]<bus>:<dev>.<func>[+iomul] Specifies PCI device for guest domain. If PCI-PCI bridge is specified, all PCI devices behind PCI-PCI bridge are reserved. + +iomul means that this PCI function will share + IO ports with other +iomul functions under same + switch. NOTE: if +iomul is specfied, all the functions + of the device will share IO ports. guestiomuldev= [PCI] Format: [sbd][,<sbd>][,...]
drivers/pci/guestdev.c +125 -18
261 lines not on this page · raw message
drivers/pci/iomulti.c +3 -1
@@ -27,6 +27,7 @@#include <asm/setup.h> #include <asm/uaccess.h> +#include "pci.h" #include "iomulti.h" #define PCI_NUM_BARS 6
@@ -423,7 +424,8 @@ static int pci_is_iomul_dev_param(structbreak ; } -return 0 ; +/* check guestcev=<device>+iomul option */ +return pci_is_iomuldev (pdev); }/*
drivers/pci/pci.h +5 -1
@@ -105,9 +105,13 @@ pci_match_one_device(const struct pci_deextern void pci_disable_bridge_window (struct pci_dev *dev);#endif #ifdef CONFIG_PCI_GUESTDEV +extern int pci_is_guestdev (struct pci_dev *dev);extern int pci_is_reassigndev (struct pci_dev *dev); +extern int pci_is_iomuldev (struct pci_dev *dev);#else -#define pci_is_reassigndev (dev) 0 +#define pci_is_guestdev (dev) 0 +#define pci_is_reassigndev (dev) 0 +#define pci_is_iomuldev (dev) 0#endif #ifdef CONFIG_PCI_GUESTDEV
pci/guestdev: enhance guestdev to accept +iomul.
enhance guestdev to accept +iomul and use it.
Signed-off-by Isaku Yamahata <[email protected]>
Documentation/kernel-parameters.txt +6 -2
@@ -577,11 +577,15 @@ running once the system is up. guestdev= [PCI,ACPI] Format: {<device path>|<sbdf>}][,{<device path>|<sbdf>}[,...]] - Format of device path: <hid>[:<uid>]-<dev>.<func>[-<dev>.<func>[,...]] - Format of sbdf: [<segment>:]<bus>:<dev>.<func> + Format of device path: <hid>[:<uid>]-<dev>.<func>[-<dev>.<func>[,...]][+iomul] + Format of sbdf: [<segment>:]<bus>:<dev>.<func>[+iomul] Specifies PCI device for guest domain. If PCI-PCI bridge is specified, all PCI devices behind PCI-PCI bridge are reserved. + +iomul means that this PCI function will share + IO ports with other +iomul functions under same + switch. NOTE: if +iomul is specfied, all the functions + of the device will share IO ports. guestiomuldev= [PCI] Format: [sbd][,<sbd>][,...]
drivers/pci/guestdev.c +125 -18
261 lines not on this page · raw message
drivers/pci/iomulti.c +3 -1
@@ -27,6 +27,7 @@#include <asm/setup.h> #include <asm/uaccess.h> +#include "pci.h" #include "iomulti.h" #define PCI_NUM_BARS 6
@@ -423,7 +424,8 @@ static int pci_is_iomul_dev_param(structbreak ; } -return 0 ; +/* check guestcev=<device>+iomul option */ +return pci_is_iomuldev (pdev); }/*
drivers/pci/pci.h +5 -1
@@ -105,9 +105,13 @@ pci_match_one_device(const struct pci_deextern void pci_disable_bridge_window (struct pci_dev *dev);#endif #ifdef CONFIG_PCI_GUESTDEV +extern int pci_is_guestdev (struct pci_dev *dev);extern int pci_is_reassigndev (struct pci_dev *dev); +extern int pci_is_iomuldev (struct pci_dev *dev);#else -#define pci_is_reassigndev (dev) 0 +#define pci_is_guestdev (dev) 0 +#define pci_is_reassigndev (dev) 0 +#define pci_is_iomuldev (dev) 0#endif #ifdef CONFIG_PCI_GUESTDEV
_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel