davinci: fix dm644x buglets
PATCH 4/5 davinci: fix dm644x buglets
From: David Brownell <[email protected]>
Fix two buglets in the dm644x support: don't set two must-be-zero bits in the UART management register; and only include the I2C hooks if the I2C driver is being included.
Signed-off-by David Brownell <[email protected]>
--- cpu/arm926ejs/davinci/dm644x.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
cpu/arm926ejs/davinci/dm644x.c +3 -1
@@ -41,7 +41,7 @@ void davinci_enable_uart0(void)lpsc_on (DAVINCI_LPSC_UART0 );/* Bringup UART0 out of reset */ -REG (UART0_PWREMU_MGMT ) =0x0000e003 ; +REG (UART0_PWREMU_MGMT ) =0x00006001 ;/* Enable UART0 MUX lines */ REG (PINMUX1 ) |=PINMUX1_UART0 ;
@@ -62,6 +62,7 @@ void davinci_enable_emac(void) }#endif +#ifdef CONFIG_DRIVER_DAVINCI_I2C void davinci_enable_i2c (void ) {lpsc_on (DAVINCI_LPSC_I2C );
@@ -69,6 +70,7 @@ void davinci_enable_i2c(void)/* Enable I2C pin Mux */ REG(PINMUX1) |= PINMUX1_I2C; } +#endif void davinci_errata_workarounds (void ) {