Generic gpmc-onenand initialization, v3
Subsystems (5)
Tony Lindgren
maintainercover Generic gpmc-onenand initialization, v3
Hi all,
Here's the whole series one more time, looks like I missed Juha from the recipients originally. After all it's mostly Juha's code! :)
To recap, this series creates a generic gpmc-onenand.c out of the board-n800-flash.c so we can get this init code to the mainline kernel. This series is against the linux-omap tree, the patch against the mainline tree will be posted later.
Regards,
Tony
---
Tony Lindgren (7):
onenand_init: Clean-up for checkpatch.pl
onenand init: Convert omap3430sdp to use gpmc-onenand
onenand_init: Allow disabling sync read and write based on flags, v3 onenand init: Pass configuration data from board-*.c files onenand init: Rename n800_* functions to gpmc_onenand_* functions onenand init: Build gpmc-onenand.o based on CONFIG_MTD_ONENAND_OMAP2 onenand init: Rename board-n800-flash.c to gpmc-onenand.c
arch/arm/mach-omap2/Makefile | 7 +-
arch/arm/mach-omap2/board-3430sdp-flash.c | 28 -------
arch/arm/mach-omap2/board-n800.c | 50 ++++++++++++
arch/arm/mach-omap2/board-rx51-flash.c | 21 -----
arch/arm/mach-omap2/board-rx51-peripherals.c | 47 ++++++++++++
arch/arm/mach-omap2/board-rx51.c | 2
arch/arm/mach-omap2/gpmc-onenand.c | 105 ++++++++++++--------------
arch/arm/plat-omap/include/mach/board.h | 8 --
arch/arm/plat-omap/include/mach/onenand.h | 29 +++++++
9 files changed, 177 insertions(+), 120 deletions(-)
delete mode 100644 arch/arm/mach-omap2/board-rx51-flash.c
rename arch/arm/mach-omap2/{board-n800-flash.c => gpmc-onenand.c} (78%)Signature · 1 line
Signature
Tony Lindgren
maintainerPATCH 1/7 onenand init: Rename board-n800-flash.c to gpmc-onenand.c
Rename board-n800-flash.c to gpmc-onenand.c.
---
arch/arm/mach-omap2/Makefile | 4 ++--
arch/arm/mach-omap2/gpmc-onenand.c | 0
2 files changed, 2 insertions(+), 2 deletions(-)
rename arch/arm/mach-omap2/{board-n800-flash.c => gpmc-onenand.c} (100%)arch/arm/mach-omap2/Makefile +2 -2
@@ -55,14 +55,14 @@ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o \ board-apollon-mmc.o \ board-apollon-keys.o -obj-$(CONFIG_MACH_NOKIA_N800) += board-n800.o board-n800-flash.o \ +obj-$(CONFIG_MACH_NOKIA_N800) += board-n800.o gpmc-onenand.o \ board-n800-mmc.o board-n800-bt.o \ board-n800-usb.o \ board-n800-dsp.o \ board-n800-camera.o obj-$(CONFIG_MACH_NOKIA_N810) += board-n810.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ - board-n800-flash.o \ + gpmc-onenand.o \ board-rx51-flash.o \ board-rx51-sdram.o \ board-rx51-video.o \
arch/arm/mach-omap2/gpmc-onenand.c renamed from arch/arm/mach-omap2/board-n800-flash.c +0 -0
Tony Lindgren
maintainerPATCH 2/7 onenand init: Build gpmc-onenand.o based on CONFIG_MTD_ONENAND_OMAP2
In reply to Tony LindgrenBuild gpmc-onenand.o based on CONFIG_MTD_ONENAND_OMAP2
--- arch/arm/mach-omap2/Makefile | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-)
arch/arm/mach-omap2/Makefile +4 -2
@@ -55,14 +55,13 @@ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o \ board-apollon-mmc.o \ board-apollon-keys.o -obj-$(CONFIG_MACH_NOKIA_N800) += board-n800.o gpmc-onenand.o \ +obj-$(CONFIG_MACH_NOKIA_N800) += board-n800.o \ board-n800-mmc.o board-n800-bt.o \ board-n800-usb.o \ board-n800-dsp.o \ board-n800-camera.o obj-$(CONFIG_MACH_NOKIA_N810) += board-n810.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ - gpmc-onenand.o \ board-rx51-flash.o \ board-rx51-sdram.o \ board-rx51-video.o \
@@ -79,6 +78,9 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \ obj-$(CONFIG_USB_MUSB_SOC) += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o +onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o +obj-y += $(onenand-m) $(onenand-y) + ifneq ($(CONFIG_USB_EHCI_HCD),) obj-y += usb-ehci.o endif
Tony Lindgren
maintainerPATCH 3/7 onenand init: Rename n800_* functions to gpmc_onenand_* functions
In reply to Tony LindgrenRename n800_* functions to gpmc_onenand_* functions
--- arch/arm/mach-omap2/Makefile | 1 - arch/arm/mach-omap2/board-n800.c | 2 +- arch/arm/mach-omap2/board-rx51-flash.c | 21 ------------------- arch/arm/mach-omap2/board-rx51.c | 4 ++-- arch/arm/mach-omap2/gpmc-onenand.c | 32 +++++++++++++++-------------- arch/arm/plat-omap/include/mach/onenand.h | 12 +++++++++++ 6 files changed, 31 insertions(+), 41 deletions(-) delete mode 100644 arch/arm/mach-omap2/board-rx51-flash.c
arch/arm/mach-omap2/Makefile +0 -1
@@ -62,7 +62,6 @@ obj-$(CONFIG_MACH_NOKIA_N800) += board-n800.o \ board-n800-camera.o obj-$(CONFIG_MACH_NOKIA_N810) += board-n810.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ - board-rx51-flash.o \ board-rx51-sdram.o \ board-rx51-video.o \ board-rx51-peripherals.o \
arch/arm/mach-omap2/board-n800.c +1 -1
@@ -689,7 +689,7 @@ void __init nokia_n800_common_init(void) {platform_add_devices (n800_devices,ARRAY_SIZE (n800_devices)); -n800_flash_init (); +gpmc_onenand_init ();n800_mmc_init ();n800_bt_init ();n800_dsp_init ();
arch/arm/mach-omap2/board-rx51-flash.c deleted +0 -21
@@ -1,21 +0,0 @@ -/* -* linux/arch/arm/mach-omap2/board-rx51-flash.c -* -* Copyright (C) 2008 Nokia -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <mach/board-rx51.h> - -extern void __init n800_flash_init (void ); - -void __init rx51_flash_init (void ) -{ -n800_flash_init (); -} -
arch/arm/mach-omap2/board-rx51.c +2 -2
@@ -30,6 +30,7 @@#include <mach/dma.h> #include <mach/gpmc.h> #include <mach/usb.h> +#include <mach/onenand.h> #include <mach/board-rx51.h> static struct omap_uart_config rx51_uart_config = {
@@ -67,7 +68,6 @@ static void __init rx51_init_irq(void)omap_gpio_init (); } -extern void __init rx51_flash_init (void );extern void __init rx51_peripherals_init (void );extern void __init rx51_video_init (void );
@@ -77,7 +77,7 @@ static void __init rx51_init(void) omap_board_config_size =ARRAY_SIZE (rx51_config);omap_serial_init ();usb_musb_init (); -rx51_flash_init (); +gpmc_onenand_init ();rx51_peripherals_init ();rx51_video_init (); }
arch/arm/mach-omap2/gpmc-onenand.c +16 -16
@@ -19,22 +19,22 @@#include <mach/board.h> #include <mach/gpmc.h> -struct mtd_partition n800_partitions[ONENAND_MAX_PARTITIONS ]; +struct mtd_partition gpmc_onenand_partitions[ONENAND_MAX_PARTITIONS ]; -int n800_onenand_setup (void __iomem *,int freq); +int gpmc_onenand_setup (void __iomem *,int freq); -static struct omap_onenand_platform_data n800_onenand_data = { +static struct omap_onenand_platform_data gpmc_onenand_data = { .cs =0 , - .parts = n800_partitions, + .parts = gpmc_onenand_partitions, .nr_parts =0 ,/* filled later */ - .onenand_setup = n800_onenand_setup, + .onenand_setup = gpmc_onenand_setup, }; -static struct platform_device n800_onenand_device = { +static struct platform_device gpmc_onenand_device = { .name ="omap2-onenand" , .id =-1 , .dev = { - .platform_data = &n800_onenand_data, + .platform_data = &gpmc_onenand_data, }, };
@@ -305,10 +305,10 @@ static int omap2_onenand_set_sync_mode(int cs, void __iomem *onenand_base,return 0 ; } -int n800_onenand_setup (void __iomem *onenand_base,int freq) +int gpmc_onenand_setup (void __iomem *onenand_base,int freq) { -struct omap_onenand_platform_data *datap = &n800_onenand_data; -struct device *dev = &n800_onenand_device.dev; +struct omap_onenand_platform_data *datap = &gpmc_onenand_data; +struct device *dev = &gpmc_onenand_device.dev;/* Set sync timings in GPMC */ if (omap2_onenand_set_sync_mode (datap->cs, onenand_base, freq) <0 ) {
@@ -319,30 +319,30 @@ int n800_onenand_setup(void __iomem *onenand_base, int freq)return 0 ; } -void __init n800_flash_init (void ) +void __init gpmc_flash_init (void ) {const struct omap_partition_config *part;int i =0 ; - n800_onenand_data.gpio_irq =cpu_is_omap34xx () ?65 :26 ; + gpmc_onenand_data.gpio_irq =cpu_is_omap34xx () ?65 :26 ;while ((part =omap_get_nr_config (OMAP_TAG_PARTITION , struct omap_partition_config, i)) != NULL) {struct mtd_partition *mpart; - mpart = n800_partitions + i; + mpart = gpmc_onenand_partitions + i; mpart->name = (char *) part->name; mpart->size = part->size; mpart->offset = part->offset; mpart->mask_flags = part->mask_flags; i++; -if (i ==ARRAY_SIZE (n800_partitions)) { +if (i ==ARRAY_SIZE (gpmc_onenand_partitions)) {printk (KERN_ERR "Too many partitions supplied\n" );return ; } } - n800_onenand_data.nr_parts = i; -if (platform_device_register (&n800_onenand_device) <0 ) { + gpmc_onenand_data.nr_parts = i; +if (platform_device_register (&gpmc_onenand_device) <0 ) {printk (KERN_ERR "Unable to register OneNAND device\n" );return ; }
arch/arm/plat-omap/include/mach/onenand.h +12 -0
@@ -23,3 +23,15 @@ struct omap_onenand_platform_data {int omap2_onenand_rephase (void );#define ONENAND_MAX_PARTITIONS 8 + +#if defined(CONFIG_MTD_ONENAND ) || defined(CONFIG_MTD_ONENAND_MODULE ) + +extern void gpmc_onenand_init (void ); + +#else + +static inline void gpmc_onenand_init (void ) +{ +} + +#endif
Tony Lindgren
maintainerPATCH 4/7 onenand init: Pass configuration data from board-*.c files
In reply to Tony LindgrenPass configuration data from board-*.c files.
Also remove support for the OMAP_TAG_PARTITION tag. If the partition info is passed, it should be passed from cmdline, and probably should be done in a generic way in the drivers/mtd.
--- arch/arm/mach-omap2/board-n800.c | 49 +++++++++++++++++++++++++- arch/arm/mach-omap2/board-rx51-peripherals.c | 46 ++++++++++++++++++++++++ arch/arm/mach-omap2/board-rx51.c | 2 - arch/arm/mach-omap2/gpmc-onenand.c | 47 +++++-------------------- arch/arm/plat-omap/include/mach/board.h | 8 ---- arch/arm/plat-omap/include/mach/onenand.h | 16 +++++++- 6 files changed, 116 insertions(+), 52 deletions(-)
arch/arm/mach-omap2/board-n800.c +48 -1
@@ -41,6 +41,7 @@#include <mach/gpio-switch.h> #include <mach/omapfb.h> #include <mach/blizzard.h> +#include <mach/onenand.h> #include <mach/board-nokia.h> #include <../drivers/cbus/tahvo.h>
@@ -685,11 +686,55 @@ static struct i2c_board_info __initdata_or_module n810_i2c_board_info_2[] = { }, }; +#if defined(CONFIG_MTD_ONENAND_OMAP2 ) || defined(CONFIG_MTD_ONENAND_OMAP2_MODULE ) + +static struct mtd_partition onenand_partitions[] = { + { + .name ="bootloader" , + .offset =0 , + .size =0x20000 , + .mask_flags =MTD_WRITEABLE ,/* Force read-only */ + }, + { + .name ="config" , + .offset =MTDPART_OFS_APPEND , + .size =0x60000 , + }, + { + .name ="kernel" , + .offset =MTDPART_OFS_APPEND , + .size =0x200000 , + }, + { + .name ="initfs" , + .offset =MTDPART_OFS_APPEND , + .size =0x400000 , + }, + { + .name ="rootfs" , + .offset =MTDPART_OFS_APPEND , + .size =MTDPART_SIZ_FULL , + }, +}; + +static struct omap_onenand_platform_data board_onenand_data = { + .cs =0 , + .gpio_irq =26 , + .parts = onenand_partitions, + .nr_parts =ARRAY_SIZE (onenand_partitions), +}; + +static void __init board_onenand_init (void ) +{ +gpmc_onenand_init (&board_onenand_data); +} + +#endif +void __init nokia_n800_common_init (void ) {platform_add_devices (n800_devices,ARRAY_SIZE (n800_devices)); -gpmc_onenand_init ();n800_mmc_init ();n800_bt_init ();n800_dsp_init ();
@@ -717,6 +762,7 @@ void __init nokia_n800_common_init(void)mipid_dev_init ();blizzard_dev_init (); +board_onenand_init (); }static void __init nokia_n800_init (void )
@@ -728,6 +774,7 @@ static void __init nokia_n800_init(void)tea5761_dev_init ();omap_register_gpio_switches (n800_gpio_switches,ARRAY_SIZE (n800_gpio_switches)); +board_onenand_init (); }void __init nokia_n800_map_io (void )
arch/arm/mach-omap2/board-rx51-peripherals.c +46 -0
63 lines not on this page · raw message
arch/arm/mach-omap2/board-rx51.c +0 -2
@@ -30,7 +30,6 @@#include <mach/dma.h> #include <mach/gpmc.h> #include <mach/usb.h> -#include <mach/onenand.h> #include <mach/board-rx51.h> static struct omap_uart_config rx51_uart_config = {
@@ -77,7 +76,6 @@ static void __init rx51_init(void) omap_board_config_size =ARRAY_SIZE (rx51_config);omap_serial_init ();usb_musb_init (); -gpmc_onenand_init ();rx51_peripherals_init ();rx51_video_init (); }
arch/arm/mach-omap2/gpmc-onenand.c +9 -38
74 lines not on this page · raw message
arch/arm/plat-omap/include/mach/board.h +0 -8
@@ -125,14 +125,6 @@ struct omap_tmp105_config {int (* set_power)(int enable); }; -struct omap_partition_config { -char name[16 ]; -unsigned int size; -unsigned int offset; -/* same as in include/linux/mtd/partitions.h */ -unsigned int mask_flags; -}; -struct omap_flash_part_str_config {char part_table[0 ]; };
arch/arm/plat-omap/include/mach/onenand.h +13 -3
@@ -9,8 +9,11 @@* published by the Free Software Foundation. */ +#include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#ifndef __ASM_ARCH_OMAP_ONENAND_H__ + struct omap_onenand_platform_data { int cs; int gpio_irq;
@@ -24,14 +27,21 @@ int omap2_onenand_rephase(void);#define ONENAND_MAX_PARTITIONS 8 -#if defined(CONFIG_MTD_ONENAND ) || defined(CONFIG_MTD_ONENAND_MODULE ) +#if defined(CONFIG_MTD_ONENAND_OMAP2 ) || defined(CONFIG_MTD_ONENAND_OMAP2_MODULE ) -extern void gpmc_onenand_init (void ); +extern void gpmc_onenand_init (struct omap_onenand_platform_data *d);#else -static inline void gpmc_onenand_init (void ) +#define board_onenand_data NULL + +static inline void board_onenand_init (void ) +{ +} + +static inline void gpmc_onenand_init (struct omap_onenand_platform_data *d) { }#endif +#endif
Tony Lindgren
maintainerPATCH 5/7 onenand_init: Allow disabling sync read and write based on flags, v3
In reply to Tony LindgrenAllow disabling sync read and write based on flags
--- arch/arm/mach-omap2/board-n800.c | 1 + arch/arm/mach-omap2/board-rx51-peripherals.c | 1 + arch/arm/mach-omap2/gpmc-onenand.c | 43 ++++++++++++++++++-------- arch/arm/plat-omap/include/mach/onenand.h | 4 ++ 4 files changed, 36 insertions(+), 13 deletions(-)
arch/arm/mach-omap2/board-n800.c +1 -0
@@ -722,6 +722,7 @@ static struct omap_onenand_platform_data board_onenand_data = { .gpio_irq = 26, .parts = onenand_partitions, .nr_parts = ARRAY_SIZE(onenand_partitions), + .flags = ONENAND_SYNC_READ, };static void __init board_onenand_init (void )
arch/arm/mach-omap2/board-rx51-peripherals.c +1 -0
@@ -515,6 +515,7 @@ static struct omap_onenand_platform_data board_onenand_data = { .gpio_irq = 65, .parts = onenand_partitions, .nr_parts = ARRAY_SIZE(onenand_partitions), + .flags = ONENAND_SYNC_READWRITE, };static void __init board_onenand_init (void )
arch/arm/mach-omap2/gpmc-onenand.c +30 -13
118 lines not on this page · raw message
arch/arm/plat-omap/include/mach/onenand.h +4 -0
@@ -14,6 +14,9 @@ #ifndef __ASM_ARCH_OMAP_ONENAND_H__ +#define ONENAND_SYNC_READ (1 << 0) +#define ONENAND_SYNC_READWRITE (1 << 1) + struct omap_onenand_platform_data { int cs; int gpio_irq;
@@ -21,6 +24,7 @@ struct omap_onenand_platform_data {int nr_parts;int (*onenand_setup)(void __iomem *,int freq);int dma_channel; +u8 flags; };int omap2_onenand_rephase (void );
Tony Lindgren
maintainerPATCH 6/7 onenand init: Convert omap3430sdp to use gpmc-onenand
In reply to Tony LindgrenConvert omap3430sdp to use gpmc-onenand. Note that sync mode does not seem to work for some reason, so disable it with flags.
--- arch/arm/mach-omap2/board-3430sdp-flash.c | 28 ++-------------------------- 1 files changed, 2 insertions(+), 26 deletions(-)
arch/arm/mach-omap2/board-3430sdp-flash.c +2 -26
@@ -103,8 +103,6 @@ static struct platform_device sdp_nor_device = { .resource = &sdp_nor_resource, }; -static int sdp_onenand_setup (void __iomem *,int freq); -static struct mtd_partition sdp_onenand_partitions[] = { { .name ="X-Loader-OneNAND" ,
@@ -138,30 +136,9 @@ static struct mtd_partition sdp_onenand_partitions[] = {static struct omap_onenand_platform_data sdp_onenand_data = { .parts = sdp_onenand_partitions, .nr_parts =ARRAY_SIZE (sdp_onenand_partitions), - .onenand_setup = sdp_onenand_setup, .dma_channel =-1 ,/* disable DMA in OMAP OneNAND driver */ }; -static struct platform_device sdp_onenand_device = { - .name ="omap2-onenand" , - .id =-1 , - .dev = { - .platform_data = &sdp_onenand_data, - }, -}; - -/* -* sdp_onenand_setup - The function configures the onenand flash. -* @onenand_base: Onenand base address -* -* @return int: Currently always returning zero. -*/ -static int sdp_onenand_setup (void __iomem *onenand_base,int freq) -{ -/* Onenand setup does nothing at present */ -return 0 ; -} -static struct mtd_partition sdp_nand_partitions[] = {/* All the partition sizes are listed in terms of NAND block size */ {
@@ -262,7 +239,7 @@ void __init sdp3430_flash_init(void) }else { ret =gpmc_cs_read_reg (cs,GPMC_CS_CONFIG7 );if ((ret &0x3F ) == (ONENAND_MAP >>24 )) - onenandcs = cs; + onenandcs = cs; } cs++; }
@@ -284,7 +261,6 @@ void __init sdp3430_flash_init(void)if (onenandcs <GPMC_CS_NUM ) { sdp_onenand_data.cs = onenandcs; -if (platform_device_register (&sdp_onenand_device) <0 ) -printk (KERN_ERR "Unable to register OneNAND device\n" ); +gpmc_onenand_init (&sdp_onenand_data); } }
Tony Lindgren
maintainerPATCH 7/7 onenand_init: Clean-up for checkpatch.pl
In reply to Tony LindgrenClean-up for checkpatch.pl
--- arch/arm/mach-omap2/gpmc-onenand.c | 15 +++++++++------ arch/arm/plat-omap/include/mach/onenand.h | 5 ++--- 2 files changed, 11 insertions(+), 9 deletions(-)
arch/arm/mach-omap2/gpmc-onenand.c +9 -6
@@ -1,8 +1,9 @@/* -* linux/arch/arm/mach-omap2/board-n800-flash.c +* linux/arch/arm/mach-omap2/gpmc-onenand.c * -* Copyright (C) 2006 Nokia Corporation -* Author: Juha Yrjola +* Copyright (C) 2006 - 2009 Nokia Corporation +* Contacts: Juha Yrjola +* Tony Lindgren * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as
@@ -14,7 +15,7 @@#include <asm/mach/flash.h> #include <linux/mtd/onenand_regs.h> -#include <asm/io.h> +#include <linux/io.h> #include <mach/onenand.h> #include <mach/board.h> #include <mach/gpmc.h>
@@ -122,7 +123,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,const int t_wph =30 ;int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; -int err, ticks_cez, sync_read =0 , sync_write =0 , first_time =0 , hf =0 ; + int first_time = 0, hf = 0 sync_read = 0, sync_write = 0; +int err, ticks_cez;int cs = cfg->cs;u32 reg;
@@ -267,7 +269,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, t.wr_access = t.access; } }else { - t.adv_wr_off =gpmc_round_ns_to_ticks (max_t (int, t_avdp, t_cer)); + t.adv_wr_off =gpmc_round_ns_to_ticks (max_t (int, + t_avdp, t_cer)); t.we_on = t.adv_wr_off +gpmc_round_ns_to_ticks (t_aavdh); t.we_off = t.we_on +gpmc_round_ns_to_ticks (t_wpl); t.cs_wr_off = t.we_off +gpmc_round_ns_to_ticks (t_wph);
arch/arm/plat-omap/include/mach/onenand.h +2 -3
@@ -27,11 +27,10 @@ struct omap_onenand_platform_data {u8 flags; }; -int omap2_onenand_rephase (void ); -#define ONENAND_MAX_PARTITIONS 8 -#if defined(CONFIG_MTD_ONENAND_OMAP2 ) || defined(CONFIG_MTD_ONENAND_OMAP2_MODULE ) +#if defined(CONFIG_MTD_ONENAND_OMAP2 ) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE )extern void gpmc_onenand_init (struct omap_onenand_platform_data *d);
Tony Lindgren
maintainerQuoted 10 lines · Tony Lindgren
Hi all,
Here's the whole series one more time, looks like I missed Juha from the recipients originally. After all it's mostly Juha's code! :)
To recap, this series creates a generic
gpmc-onenand.cout of theboard-n800-flash.cso we can get this init code to the mainline kernel. This series is against the linux-omap tree, the patch against the mainline tree will be posted later.
Pushing this series to linux-omap tree today.
Quoted 35 lines
Regards,
Tony
---
Tony Lindgren (7):
onenand_init: Clean-up for checkpatch.pl
onenand init: Convert omap3430sdp to use gpmc-onenand
onenand_init: Allow disabling sync read and write based on flags, v3 onenand init: Pass configuration data from board-*.c files onenand init: Rename n800_* functions to gpmc_onenand_* functions onenand init: Build gpmc-onenand.o based onCONFIG_MTD_ONENAND_OMAP2onenand init: Renameboard-n800-flash.ctogpmc-onenand.carch/arm/mach-omap2/Makefile | 7 +- arch/arm/mach-omap2/board-3430sdp-flash.c | 28 ------- arch/arm/mach-omap2/board-n800.c | 50 ++++++++++++ arch/arm/mach-omap2/board-rx51-flash.c | 21 ----- arch/arm/mach-omap2/board-rx51-peripherals.c | 47 ++++++++++++ arch/arm/mach-omap2/board-rx51.c | 2 arch/arm/mach-omap2/gpmc-onenand.c | 105 ++++++++++++-------------- arch/arm/plat-omap/include/mach/board.h | 8 -- arch/arm/plat-omap/include/mach/onenand.h | 29 +++++++ 9 files changed, 177 insertions(+), 120 deletions(-) delete mode 100644 arch/arm/mach-omap2/board-rx51-flash.c rename arch/arm/mach-omap2/{board-n800-flash.c => gpmc-onenand.c} (78%)Signature · 5 lines
Signature -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html