Gigaset driver bugfixes and cleanups
Subsystems (3)
PATCH 1/8 gigaset: documentation update
In reply to Tilman SchmidtMention handling of unregisteted DECT wireless datasets in README.gigaset.
Signed-off-by Tilman Schmidt <[email protected]>
--- Documentation/isdn/README.gigaset | 23 ++++++++++++++++++++++- 1 files changed, 22 insertions(+), 1 deletions(-)
Documentation/isdn/README.gigaset +22 -1
@@ -192,7 +192,6 @@ GigaSet 307x Device Driver 2.6. M105 Undocumented USB Requests ------------------------------ - The Gigaset M105 USB data box understands a couple of useful, but undocumented USB commands. These requests are not used in normal operation (for wireless access to the base), but are needed for access
@@ -204,6 +203,20 @@ GigaSet 307x Device Driver M105, try setting that option to "y" via 'make {x,menu}config' and recompiling the driver. +2.7. Unregistered Wireless Devices (M101/M105) + ----------------------------------------- + The main purpose of the ser_gigaset and usb_gigaset drivers is to allow + the M101 and M105 wireless devices to be used as ISDN devices for ISDN + connections through a Gigaset base. Therefore they assume that the device + is registered to a DECT base. + + If the M101/M105 device is not registered to a base, initialization of + the device fails, and a corresponding error message is logged by the + driver. In that situation, a restricted set of functions is available + which includes, in particular, those necessary for registering the device + to a base or for switching it between Fixed Part and Portable Part + modes. For the M105, these commands require the "Support for undocumented + USB requests" configuration option (see section 2.6.) to be enabled. 3. Troubleshooting ---------------
@@ -240,6 +253,14 @@ GigaSet 307x Device Driver Recompile the usb_gigaset driver with the kernel configuration option CONFIG_GIGASET_UNDOCREQ set to 'y'. (see section 2.6.) + Problem: + Messages like this: + usb_gigaset 3-2:1.0: Could not initialize the device. + appear in your syslog. + Solution: + Check whether your M10x wireless device is correctly registered to the + Gigaset base. (see section 2.7.) + 3.2. Telling the driver to provide more information ---------------------------------------------- Building the driver with the "Gigaset debugging" kernel configuration
Signature · 1 line
1.6.2.1.214.ge986c
PATCH 2/8 gigaset: fix possible oops in error handling
In reply to Tilman SchmidtUse pr_warning() / pr_err() instead of dev_warn() / dev_err() in two places where the dev pointer isn't guaranteed to be valid.
Impact: error handling bugfix
Signed-off-by Tilman Schmidt <[email protected]>
--- drivers/isdn/gigaset/interface.c | 3 +-- drivers/isdn/gigaset/proc.c | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-)
drivers/isdn/gigaset/interface.c +1 -2
@@ -599,8 +599,7 @@ void gigaset_if_init(struct cardstate *cs)if (!IS_ERR (cs->tty_dev))dev_set_drvdata (cs->tty_dev, cs);else { -dev_warn (cs->dev, -"could not register device to the tty subsystem\n" ); +pr_warning ("could not register device to the tty subsystem\n" ); cs->tty_dev =NULL ; }mutex_unlock (&cs->mutex);
drivers/isdn/gigaset/proc.c +1 -1
@@ -79,5 +79,5 @@ void gigaset_init_dev_sysfs(struct cardstate *cs)gig_dbg (DEBUG_INIT ,"setting up sysfs" );if (device_create_file (cs->tty_dev, &dev_attr_cidmode)) -dev_err (cs->dev,"could not create sysfs attribute\n" ); +pr_err ("could not create sysfs attribute\n" ); }
Signature · 1 line
1.6.2.1.214.ge986c
PATCH 5/8 gigaset: remove obsolete references to m10x state table
In reply to Tilman SchmidtThe separation of state tables for base and M10x has long been removed. Clean up remaining traces of it.
Impact: cleanup
Signed-off-by Tilman Schmidt <[email protected]>
--- drivers/isdn/gigaset/common.c | 10 ++-------- drivers/isdn/gigaset/ev-layer.c | 4 ++-- drivers/isdn/gigaset/gigaset.h | 4 ++-- 3 files changed, 6 insertions(+), 12 deletions(-)
drivers/isdn/gigaset/common.c +2 -8
@@ -672,14 +672,8 @@ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels, cs->tty =NULL ; cs->tty_dev =NULL ; cs->cidmode = cidmode !=0 ; - -//if(onechannel) { //FIXME - cs->tabnocid = gigaset_tab_nocid_m10x; - cs->tabcid = gigaset_tab_cid_m10x; -//} else { -// cs->tabnocid = gigaset_tab_nocid; -// cs->tabcid = gigaset_tab_cid; -//} + cs->tabnocid = gigaset_tab_nocid; + cs->tabcid = gigaset_tab_cid;init_waitqueue_head (&cs->waitqueue); cs->waiting =0 ;
drivers/isdn/gigaset/ev-layer.c +2 -2
@@ -160,7 +160,7 @@// 100: init, 200: dle0, 250:dle1, 300: get cid (dial), 350: "hup" (no cid), 400: hup, 500: reset, 600: dial, 700: ring -struct reply_t gigaset_tab_nocid_m10x[]=/* with dle mode */ +struct reply_t gigaset_tab_nocid[] = {/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
@@ -280,7 +280,7 @@ struct reply_t gigaset_tab_nocid_m10x[]= /* with dle mode */ };// 600: start dialing, 650: dial in progress, 800: connection is up, 700: ring, 400: hup, 750: accepted icall -struct reply_t gigaset_tab_cid_m10x[] =/* for M10x */ +struct reply_t gigaset_tab_cid[] = {/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
drivers/isdn/gigaset/gigaset.h +2 -2
@@ -282,8 +282,8 @@ struct reply_t {char *command;/* NULL==none */ }; -extern struct reply_t gigaset_tab_cid_m10x[]; -extern struct reply_t gigaset_tab_nocid_m10x[]; +extern struct reply_t gigaset_tab_cid[]; +extern struct reply_t gigaset_tab_nocid[];struct inbuf_t {unsigned char *rcvbuf;/* usb-gigaset receive buffer */
Signature · 1 line
1.6.2.1.214.ge986c
PATCH 6/8 gigaset: remove unused structure member rcvbytes
In reply to Tilman SchmidtThe B channel data structure member rcvbytes was never set to anything else but zero, so drop it.
Impact: cleanup
Signed-off-by Tilman Schmidt <[email protected]>
--- drivers/isdn/gigaset/asyncdata.c | 5 ++--- drivers/isdn/gigaset/common.c | 2 -- drivers/isdn/gigaset/gigaset.h | 1 - 3 files changed, 2 insertions(+), 6 deletions(-)
drivers/isdn/gigaset/asyncdata.c +2 -3
@@ -174,9 +174,8 @@ byte_stuff:if (unlikely (fcs !=PPP_GOODFCS )) {dev_err (cs->dev, -"Packet checksum at %lu failed, " -"packet is corrupted (%u bytes)!\n" , - bcs->rcvbytes, skb->len); +"Checksum failed, %u bytes corrupted!\n" , + skb->len); compskb =NULL ;gigaset_rcv_error (compskb, cs, bcs); error =1 ;
drivers/isdn/gigaset/common.c +0 -2
@@ -565,8 +565,6 @@ static struct bc_state *gigaset_initbcs(struct bc_state *bcs,gig_dbg (DEBUG_INIT ,"setting up bcs[%d]->at_state" , channel);gigaset_at_init (&bcs->at_state, bcs, cs,-1 ); - bcs->rcvbytes =0 ; -#ifdef CONFIG_GIGASET_DEBUG bcs->emptycount =0 ;#endif
drivers/isdn/gigaset/gigaset.h +0 -1
@@ -384,7 +384,6 @@ struct bc_state {int trans_up;/* Counter of packages (upstream) */ struct at_state_t at_state; -unsigned long rcvbytes;__u16 fcs;struct sk_buff *skb;
Signature · 1 line
1.6.2.1.214.ge986c
PATCH 7/8 gigaset: remove UNDOCREQ config option
In reply to Tilman SchmidtDrop the kernel config option GIGASET_UNDOCREQ, permanently activating the code it controlled, as there have been no reports of problems caused by its activation but many problems caused by it being disabled.
Also fix a few bad comments while we're at it.
Impact: cleanup
Signed-off-by Tilman Schmidt <[email protected]>
--- Documentation/isdn/README.gigaset | 33 +++---------------- drivers/isdn/gigaset/Kconfig | 7 ---- drivers/isdn/gigaset/usb-gigaset.c | 62 +++++++++++++---------------------- 3 files changed, 28 insertions(+), 74 deletions(-)
Documentation/isdn/README.gigaset +5 -28
@@ -149,10 +149,8 @@ GigaSet 307x Device Driver configuration files and chat scripts in the gigaset-VERSION/ppp directory in the driver packages from http://sourceforge.net/projects/gigaset307x/. Please note that the USB drivers are not able to change the state of the - control lines (the M105 driver can be configured to use some undocumented - control requests, if you really need the control lines, though). This means - you must use "Stupid Mode" if you are using wvdial or you should use the - nocrtscts option of pppd. + control lines. This means you must use "Stupid Mode" if you are using + wvdial or you should use the nocrtscts option of pppd. You must also assure that the ppp_async module is loaded with the parameter flag_time=0. You can do this e.g. by adding a line like
@@ -190,20 +188,7 @@ GigaSet 307x Device Driver You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode setting (ttyGxy is ttyGU0 or ttyGB0). -2.6. M105 Undocumented USB Requests - ------------------------------ - The Gigaset M105 USB data box understands a couple of useful, but - undocumented USB commands. These requests are not used in normal - operation (for wireless access to the base), but are needed for access - to the M105's own configuration mode (registration to the base, baudrate - and line format settings, device status queries) via the gigacontr - utility. Their use is controlled by the kernel configuration option - "Support for undocumented USB requests" (CONFIG_GIGASET_UNDOCREQ). If you - encounter error code -ENOTTY when trying to use some features of the - M105, try setting that option to "y" via 'make {x,menu}config' and - recompiling the driver. - -2.7. Unregistered Wireless Devices (M101/M105) +2.6. Unregistered Wireless Devices (M101/M105) ----------------------------------------- The main purpose of the ser_gigaset and usb_gigaset drivers is to allow the M101 and M105 wireless devices to be used as ISDN devices for ISDN
@@ -215,8 +200,7 @@ GigaSet 307x Device Driver driver. In that situation, a restricted set of functions is available which includes, in particular, those necessary for registering the device to a base or for switching it between Fixed Part and Portable Part - modes. For the M105, these commands require the "Support for undocumented - USB requests" configuration option (see section 2.6.) to be enabled. + modes. 3. Troubleshooting ---------------
@@ -247,19 +231,12 @@ GigaSet 307x Device Driver Select Unimodem mode for all DECT data adapters. (see section 2.4.) Problem: - You want to configure your USB DECT data adapter (M105) but gigacontr - reports an error: "/dev/ttyGU0: Inappropriate ioctl for device". - Solution: - Recompile the usb_gigaset driver with the kernel configuration option - CONFIG_GIGASET_UNDOCREQ set to 'y'. (see section 2.6.) - - Problem: Messages like this: usb_gigaset 3-2:1.0: Could not initialize the device. appear in your syslog. Solution: Check whether your M10x wireless device is correctly registered to the - Gigaset base. (see section 2.7.) + Gigaset base. (see section 2.6.) 3.2. Telling the driver to provide more information ----------------------------------------------
drivers/isdn/gigaset/Kconfig +0 -7
@@ -42,11 +42,4 @@ config GIGASET_DEBUG This enables debugging code in the Gigaset drivers. If in doubt, say yes. -config GIGASET_UNDOCREQ - bool "Support for undocumented USB requests" - help - This enables support for USB requests we only know from - reverse engineering (currently M105 only). If you need - features like configuration mode of M105, say yes. - endif # ISDN_DRV_GIGASET
drivers/isdn/gigaset/usb-gigaset.c +23 -39
136 lines not on this page · raw message
Signature · 1 line
1.6.2.1.214.ge986c
PATCH 8/8 gigaset: move up Kconfig inclusion point
In reply to Tilman SchmidtIn preparation for porting to kernel CAPI subsystem, include the Gigaset driver's Kconfig directly from ISDN's instead of I4L's.
Impact: Kconfig reorganisation, no functional change
Signed-off-by Tilman Schmidt <[email protected]>
--- drivers/isdn/Kconfig | 2 ++ drivers/isdn/gigaset/Kconfig | 1 + drivers/isdn/i4l/Kconfig | 2 -- 3 files changed, 3 insertions(+), 2 deletions(-)
drivers/isdn/Kconfig +2 -0
@@ -61,4 +61,6 @@ source "drivers/isdn/hardware/Kconfig" endif # ISDN_CAPI +source "drivers/isdn/gigaset/Kconfig" + endif # ISDN
drivers/isdn/gigaset/Kconfig +1 -0
@@ -1,5 +1,6 @@ menuconfig ISDN_DRV_GIGASET tristate "Siemens Gigaset support" + depends on ISDN_I4L select CRC_CCITT select BITREVERSE help
drivers/isdn/i4l/Kconfig +0 -2
@@ -135,5 +135,3 @@ source "drivers/isdn/act2000/Kconfig" source "drivers/isdn/hysdn/Kconfig" endmenu - -source "drivers/isdn/gigaset/Kconfig"
Signature · 1 line
1.6.2.1.214.ge986c
cover Gigaset driver bugfixes and cleanups
Dave,
following are 8 small patches for the Gigaset driver I'd like to get out from under my feet. Nothing urgent, so if you feel they are inappropriate for merging that late in the 2.6.30 cycle they can as well wait for 2.6.31.
Thanks,
Tilman
PATCH 3/8 gigaset: fix error return code
gigaset_register_to_LL() is expected to print a message and return 0 on failure. Make it do so consistently.
Impact: error handling bugfix
Signed-off-by Tilman Schmidt <[email protected]>
--- drivers/isdn/gigaset/i4l.c | 12 +++++++----- 1 files changed, 7 insertions(+), 5 deletions(-)
drivers/isdn/gigaset/i4l.c +7 -5
@@ -544,11 +544,11 @@ int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid)gig_dbg (DEBUG_ANY ,"Register driver capabilities to LL" ); -//iif->id[sizeof(iif->id) - 1]=0; -//strncpy(iif->id, isdnid, sizeof(iif->id) - 1); if (snprintf (iif->id,sizeof iif->id,"%s_%u" , isdnid, cs->minor_index) - >=sizeof iif->id) -return -ENOMEM ;//FIXME EINVAL/...?? + >=sizeof iif->id) { +pr_err ("ID too long: %s\n" , isdnid); +return 0 ; + } iif->owner =THIS_MODULE ; iif->channels = cs->channels;
@@ -568,8 +568,10 @@ int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid) iif->rcvcallb_skb =NULL ;/* Will be set by LL */ iif->statcallb =NULL ;/* Will be set by LL */ -if (!register_isdn (iif)) +if (!register_isdn (iif)) { +pr_err ("register_isdn failed\n" );return 0 ; + } cs->myid = iif->channels;/* Set my device id */ return 1 ;
Signature · 1 line
1.6.2.1.214.ge986c
PATCH 4/8 gigaset: skip unnecessary hex formatting
In reply to Tilman SchmidtDon't generate the hex representation of the payload data if it isn't actually used afterwards.
Impact: optimization
Signed-off-by Tilman Schmidt <[email protected]>
--- drivers/isdn/gigaset/isocdata.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
drivers/isdn/gigaset/isocdata.c +4 -0
@@ -246,6 +246,10 @@ static inline void dump_bytes(enum debuglevel level, const char *tag,unsigned char c;static char dbgline[3 *32 +1 ];int i =0 ; + +if (!(gigaset_debuglevel & level)) +return ; +while (count-- >0 ) {if (i >sizeof (dbgline) -4 ) { dbgline[i] ='\0' ;
Signature · 1 line
1.6.2.1.214.ge986c
David Miller
maintainerFrom: Tilman Schmidt <[email protected]>
Date: Thu, 14 May 2009 00:44:17 +0200 (CEST)
Quoted 4 lines
following are 8 small patches for the Gigaset driver I'd like to get out from under my feet. Nothing urgent, so if you feel they are inappropriate for merging that late in the 2.6.30 cycle they can as well wait for 2.6.31.
All applied to net-next-2.6, thanks!