ARM next Pull Request
Hi Wolfgang,
Please pull
The following changes since commit cab6c2a6135cc8f4244d8e9c005bddd208d2a26f:
Wolfgang Denk (1):
TQM834x: use buffered writes to accelerate writing to flash
are available in the git repository at:
git://git.denx.de/u-boot-arm.git next
Dirk Behme (2):
OMAP3: Zoom2: Enable Board and CPU info
OMAP3: Fix CKE1 MUX setting to allow self-refresh
Jean-Christophe PLAGNIOL-VILLARD (11):
afeb9260: fix macb device init
arm: unify lds
arm: unify interrupt init
arm: remove cpu_init
pxa: move serial driver to drivers/serial
lh7a40x: move serial driver to drivers/serial
omap24xx: rename reset file
at91: extract reset from timer
at91: move cpu name define to arm/arch/ cpu header
at91: move cpu info print to cpu at91/cpu.c: add missing Copyright & GPL header
Tom Rix (2):
ZOOM2 Add serial support.
ZOOM2 Add led support.
arm_config.mk | 2 +
board/actux1/config.mk | 2 +
board/actux2/config.mk | 2 +
board/actux3/config.mk | 2 +
board/armadillo/u-boot.lds | 55 --------
board/armltd/integratorap/config.mk | 6 -
board/armltd/integratorap/split_by_variant.sh | 4 -
board/armltd/integratorap/u-boot.lds.template | 53 --------
board/armltd/integratorcp/config.mk | 6 -
board/armltd/integratorcp/split_by_variant.sh | 4 -
board/armltd/integratorcp/u-boot.lds.template | 53 --------
board/armltd/versatile/u-boot.lds | 51 --------
board/atmel/at91rm9200dk/u-boot.lds | 57 ---------
board/atmel/at91rm9200ek/u-boot.lds | 56 ---------
board/cerf250/u-boot.lds | 56 ---------
board/cm4008/u-boot.lds | 56 ---------
board/cm41xx/u-boot.lds | 56 ---------
board/cmc_pu2/u-boot.lds | 57 ---------
board/cradle/u-boot.lds | 56 ---------
board/csb226/u-boot.lds | 56 ---------
board/csb637/u-boot.lds | 56 ---------
board/dave/B2/u-boot.lds | 58 ---------
board/davedenx/qong/u-boot.lds | 58 ---------
board/delta/u-boot.lds | 56 ---------
board/dnp1110/u-boot.lds | 56 ---------
board/ep7312/u-boot.lds | 56 ---------
board/evb4510/u-boot.lds | 69 -----------
board/freescale/mx31ads/config.mk | 2 +
board/gcplus/u-boot.lds | 58 ---------
board/impa7/u-boot.lds | 56 ---------
board/imx31_litekit/u-boot.lds | 59 ---------
board/imx31_phycore/u-boot.lds | 59 ---------
board/innokom/u-boot.lds | 56 ---------
board/kb9202/u-boot.lds | 56 ---------
board/lart/u-boot.lds | 56 ---------
board/logodl/u-boot.lds | 56 ---------
board/lpc2292sodimm/u-boot.lds | 55 --------
board/lubbock/u-boot.lds | 56 ---------
board/m501sk/u-boot.lds | 55 --------
board/modnet50/u-boot.lds | 69 -----------
board/mp2usb/u-boot.lds | 56 ---------
board/mpl/vcma9/u-boot.lds | 57 ---------
board/mx1ads/u-boot.lds | 58 ---------
board/netstar/u-boot.lds | 55 --------
board/ns9750dev/u-boot.lds | 59 ---------
board/omap1510inn/u-boot.lds | 57 ---------
board/omap1610inn/u-boot.lds | 52 --------
board/omap2420h4/u-boot.lds | 59 ---------
board/omap3/beagle/beagle.h | 2 +-
board/omap3/overo/overo.h | 2 +-
board/omap3/zoom2/Makefile | 7 +-
board/omap3/zoom2/led.c | 129 +++++++++++++++++++
board/omap3/zoom2/zoom2.c | 40 ++++++
board/omap3/zoom2/zoom2_serial.c | 130 ++++++++++++++++++++
board/omap3/zoom2/zoom2_serial.h | 75 +++++++++++
board/pleb2/u-boot.lds | 56 ---------
board/prodrive/pdnb3/u-boot.lds | 56 ---------
board/ronetix/pm9263/pm9263.c | 7 -
board/samsung/smdk2400/u-boot.lds | 57 ---------
board/samsung/smdk2410/u-boot.lds | 57 ---------
board/samsung/smdk6400/config.mk | 2 +
board/sbc2410x/u-boot.lds | 56 ---------
board/shannon/u-boot.lds | 56 ---------
board/siemens/SMN42/u-boot.lds | 55 --------
board/sx1/u-boot.lds | 57 ---------
board/trab/config.mk | 2 +
board/trizepsiv/u-boot.lds | 56 ---------
board/voiceblue/u-boot.lds | 56 ---------
board/wepep250/u-boot.lds | 56 ---------
board/xaeniax/u-boot.lds | 56 ---------
board/xsengine/u-boot.lds | 56 ---------
board/zylonite/u-boot.lds | 56 ---------
common/serial.c | 2 +
cpu/arm1136/cpu.c | 16 ---
cpu/arm1136/omap24xx/Makefile | 2 +-
cpu/arm1136/omap24xx/{start.S => reset.S} | 0
{board/apollon => cpu/arm1136}/u-boot.lds | 5 +-
cpu/arm1176/cpu.c | 5 -
{board/omap5912osk => cpu/arm1176}/u-boot.lds | 10 +-
cpu/arm720t/cpu.c | 12 --
cpu/arm720t/interrupts.c | 2 +-
{board/scb9328 => cpu/arm720t}/u-boot.lds | 7 +-
cpu/arm920t/cpu.c | 16 ---
{board/xm250 => cpu/arm920t}/u-boot.lds | 14 ++-
cpu/arm925t/cpu.c | 16 ---
{board/lpd7a40x => cpu/arm925t}/u-boot.lds | 10 +-
cpu/arm926ejs/at91/Makefile | 1 +
cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +-
cpu/arm926ejs/at91/config.mk | 1 -
cpu/arm926ejs/at91/cpu.c | 42 ++++++-
.../u-boot.lds => cpu/arm926ejs/at91/reset.c | 60 +++-------
cpu/arm926ejs/at91/timer.c | 15 ---
cpu/arm926ejs/at91/u-boot.lds | 57 ---------
cpu/arm926ejs/cpu.c | 16 ---
cpu/arm926ejs/davinci/config.mk | 2 -
{board/st/nmdk8815 => cpu/arm926ejs}/u-boot.lds | 11 ++-
cpu/arm946es/cpu.c | 16 ---
{board/omap730p2 => cpu/arm946es}/u-boot.lds | 10 +-
cpu/arm_cortexa8/cpu.c | 17 ---
cpu/arm_cortexa8/omap3/config.mk | 2 -
cpu/arm_cortexa8/{omap3 => }/u-boot.lds | 0
cpu/arm_intcm/cpu.c | 16 ---
cpu/{arm926ejs/davinci => arm_intcm}/u-boot.lds | 10 +-
cpu/ixp/cpu.c | 17 ---
cpu/ixp/interrupts.c | 2 +-
{board/ixdp425 => cpu/ixp}/u-boot.lds | 8 +-
cpu/lh7a40x/Makefile | 2 +-
cpu/lh7a40x/cpu.c | 16 ---
{board/st/nmdk8815 => cpu/lh7a40x}/u-boot.lds | 9 +-
cpu/pxa/Makefile | 1 -
cpu/pxa/cpu.c | 16 ---
{board/pxa255_idp => cpu/pxa}/u-boot.lds | 6 +-
cpu/s3c44b0/cpu.c | 2 +-
{board/mx1fs2 => cpu/s3c44b0}/u-boot.lds | 5 +-
cpu/sa1100/cpu.c | 12 --
{board/assabet => cpu/sa1100}/u-boot.lds | 7 +-
drivers/serial/Makefile | 2 +
drivers/serial/ns16550.c | 4 +-
.../serial.c => drivers/serial/serial_lh7a40x.c | 0
cpu/pxa/serial.c => drivers/serial/serial_pxa.c | 0
include/asm-arm/arch-at91/at91cap9.h | 5 +
include/asm-arm/arch-at91/at91sam9260.h | 9 ++
include/asm-arm/arch-at91/at91sam9261.h | 4 +
include/asm-arm/arch-at91/at91sam9263.h | 4 +
include/asm-arm/arch-at91/at91sam9rl.h | 5 +
include/asm-arm/u-boot-arm.h | 1 +
include/configs/B2.h | 1 +
include/configs/at91cap9adk.h | 1 -
include/configs/at91sam9260ek.h | 2 -
include/configs/at91sam9261ek.h | 1 -
include/configs/at91sam9263ek.h | 1 -
include/configs/at91sam9rlek.h | 1 -
include/configs/cerf250.h | 1 +
include/configs/cradle.h | 1 +
include/configs/csb226.h | 1 +
include/configs/delta.h | 1 +
include/configs/innokom.h | 1 +
include/configs/logodl.h | 1 +
include/configs/lpd7a400.h | 1 +
include/configs/lpd7a404.h | 1 +
include/configs/lubbock.h | 1 +
include/configs/omap3_zoom2.h | 48 ++++++--
include/configs/pleb2.h | 1 +
include/configs/pm9263.h | 3 +-
include/configs/pxa255_idp.h | 1 +
include/configs/trizepsiv.h | 1 +
include/configs/wepep250.h | 1 +
include/configs/xaeniax.h | 1 +
include/configs/xm250.h | 1 +
include/configs/xsengine.h | 1 +
include/configs/zylonite.h | 1 +
include/serial.h | 7 +
lib_arm/board.c | 1 -
lib_arm/interrupts.c | 13 ++
154 files changed, 641 insertions(+), 3414 deletions(-)
delete mode 100644 board/armadillo/u-boot.lds
delete mode 100644 board/armltd/integratorap/u-boot.lds.template
delete mode 100644 board/armltd/integratorcp/u-boot.lds.template
delete mode 100644 board/armltd/versatile/u-boot.lds
delete mode 100644 board/atmel/at91rm9200dk/u-boot.lds
delete mode 100644 board/atmel/at91rm9200ek/u-boot.lds
delete mode 100644 board/cerf250/u-boot.lds
delete mode 100644 board/cm4008/u-boot.lds
delete mode 100644 board/cm41xx/u-boot.lds
delete mode 100644 board/cmc_pu2/u-boot.lds
delete mode 100644 board/cradle/u-boot.lds
delete mode 100644 board/csb226/u-boot.lds
delete mode 100644 board/csb637/u-boot.lds
delete mode 100644 board/dave/B2/u-boot.lds
delete mode 100644 board/davedenx/qong/u-boot.lds
delete mode 100644 board/delta/u-boot.lds
delete mode 100644 board/dnp1110/u-boot.lds
delete mode 100644 board/ep7312/u-boot.lds
delete mode 100644 board/evb4510/u-boot.lds
delete mode 100644 board/gcplus/u-boot.lds
delete mode 100644 board/impa7/u-boot.lds
delete mode 100644 board/imx31_litekit/u-boot.lds
delete mode 100644 board/imx31_phycore/u-boot.lds
delete mode 100644 board/innokom/u-boot.lds
delete mode 100644 board/kb9202/u-boot.lds
delete mode 100644 board/lart/u-boot.lds
delete mode 100644 board/logodl/u-boot.lds
delete mode 100644 board/lpc2292sodimm/u-boot.lds
delete mode 100644 board/lubbock/u-boot.lds
delete mode 100644 board/m501sk/u-boot.lds
delete mode 100644 board/modnet50/u-boot.lds
delete mode 100644 board/mp2usb/u-boot.lds
delete mode 100644 board/mpl/vcma9/u-boot.lds
delete mode 100644 board/mx1ads/u-boot.lds
delete mode 100644 board/netstar/u-boot.lds
delete mode 100644 board/ns9750dev/u-boot.lds
delete mode 100644 board/omap1510inn/u-boot.lds
delete mode 100644 board/omap1610inn/u-boot.lds
delete mode 100644 board/omap2420h4/u-boot.lds
create mode 100644 board/omap3/zoom2/led.c
create mode 100644 board/omap3/zoom2/zoom2_serial.c
create mode 100644 board/omap3/zoom2/zoom2_serial.h
delete mode 100644 board/pleb2/u-boot.lds
delete mode 100644 board/prodrive/pdnb3/u-boot.lds
delete mode 100644 board/samsung/smdk2400/u-boot.lds
delete mode 100644 board/samsung/smdk2410/u-boot.lds
delete mode 100644 board/sbc2410x/u-boot.lds
delete mode 100644 board/shannon/u-boot.lds
delete mode 100644 board/siemens/SMN42/u-boot.lds
delete mode 100644 board/sx1/u-boot.lds
delete mode 100644 board/trizepsiv/u-boot.lds
delete mode 100644 board/voiceblue/u-boot.lds
delete mode 100644 board/wepep250/u-boot.lds
delete mode 100644 board/xaeniax/u-boot.lds
delete mode 100644 board/xsengine/u-boot.lds
delete mode 100644 board/zylonite/u-boot.lds
rename cpu/arm1136/omap24xx/{start.S => reset.S} (100%)
rename {board/apollon => cpu/arm1136}/u-boot.lds (94%)
rename {board/omap5912osk => cpu/arm1176}/u-boot.lds (96%)
rename {board/scb9328 => cpu/arm720t}/u-boot.lds (92%)
rename {board/xm250 => cpu/arm920t}/u-boot.lds (84%)
rename {board/lpd7a40x => cpu/arm925t}/u-boot.lds (91%)
rename board/actux4/u-boot.lds => cpu/arm926ejs/at91/reset.c (56%)
delete mode 100644 cpu/arm926ejs/at91/u-boot.lds
copy {board/st/nmdk8815 => cpu/arm926ejs}/u-boot.lds (92%)
rename {board/omap730p2 => cpu/arm946es}/u-boot.lds (96%)
rename cpu/arm_cortexa8/{omap3 => }/u-boot.lds (100%)
rename cpu/{arm926ejs/davinci => arm_intcm}/u-boot.lds (96%)
rename {board/ixdp425 => cpu/ixp}/u-boot.lds (94%)
rename {board/st/nmdk8815 => cpu/lh7a40x}/u-boot.lds (96%)
rename {board/pxa255_idp => cpu/pxa}/u-boot.lds (96%)
rename {board/mx1fs2 => cpu/s3c44b0}/u-boot.lds (96%)
rename {board/assabet => cpu/sa1100}/u-boot.lds (95%)
rename cpu/lh7a40x/serial.c => drivers/serial/serial_lh7a40x.c (100%)
rename cpu/pxa/serial.c => drivers/serial/serial_pxa.c (100%)Best Regards,
J.
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 15 lines · In message <[email protected]> you wrote:
Hi Wolfgang,
Please pull
The following changes since commitcab6c2a6135cc8f4244d8e9c005bddd208d2a26f:
Wolfgang Denk (1):
TQM834x: use buffered writes to accelerate writing to flashare available in the git repository at:
git://git.denx.de/u-boot-arm.gitnextDirk Behme (2):
OMAP3: Zoom2: Enable Board and CPU info
OMAP3: Fix CKE1 MUX setting to allow self-refresh
Quoted 12 lines
Jean-Christophe PLAGNIOL-VILLARD (11):
afeb9260: fix macb device init
arm: unify lds
arm: unify interrupt init
arm: removecpu_init
pxa: move serial driver todrivers/serial
lh7a40x: move serial driver todrivers/serial
omap24xx: rename reset file
at91: extract reset from timer
at91: move cpu name define to arm/arch/ cpu header
at91: move cpu info print to cpuat91/cpu.c: add missing Copyright & GPL header
It doesn't work like that. I told you before, and no matter how often you try it will never work.
I will not acceptt hat you post a number of patcehs and send a pull request for them just a couple of hours later (less than 5 hours). And that on a Friday night.
You MUST give people a real chance to review your patches.
I will NOT pull that. Please apply again after a couple of days.
And please STOP doing this.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "What terrible way to die." "There are no good ways." -- Sulu and Kirk, "That Which Survives", stardate unknown
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 9 lines · In message <[email protected]> you wrote:
Please pull
The following changes since commitcab6c2a6135cc8f4244d8e9c005bddd208d2a26f:
Wolfgang Denk (1):
TQM834x: use buffered writes to accelerate writing to flashare available in the git repository at:
git://git.denx.de/u-boot-arm.gitnext
I'm trying to review your patches, but:
Quoted 2 lines
Jean-Christophe PLAGNIOL-VILLARD (11):
afeb9260: fix macb device init
??? This patch has never been posted on the ML before.
Quoted 1 line
arm: unify lds
For this patch, neither the patch itself nor a URL which I can use to download the patch using "wget" or "ftp" or similar has ever been posted.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de e-credibility: the non-guaranteeable likelihood that the electronic data you're seeing is genuine rather than somebody's made-up crap. - Karl Lehenbauer
Dear Jean-Christophe,
Quoted 17 lines · Wolfgang Denk
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 8 lines · In message <[email protected]> you wrote:
Please pull
The following changes since commitcab6c2a6135cc8f4244d8e9c005bddd208d2a26f:
Wolfgang Denk (1):
TQM834x: use buffered writes to accelerate writing to flashare available in the git repository at:
git://git.denx.de/u-boot-arm.gitnextI'm trying to review your patches, but:
Quoted 2 lines
Jean-Christophe PLAGNIOL-VILLARD (11):
afeb9260: fix macb device init
Quoted 7 lines
??? This patch has never been posted on the ML before.
Quoted 1 line
arm: unify lds
For this patch, neither the patch itself nor a URL which I can use to download the patch using "wget" or "ftp" or similar has ever been posted.
Btw.: As it seems that some of the patches in this pull request still need some discussion, it would be nice if we could get a pull request with the agreed patches only. Namely the patches from Tom and me ;)
Many thanks and best regards
Dirk
Quoted 11 lines · Wolfgang Denk
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 8 lines · In message <[email protected]> you wrote:
Please pull
The following changes since commitcab6c2a6135cc8f4244d8e9c005bddd208d2a26f:
Wolfgang Denk (1):
TQM834x: use buffered writes to accelerate writing to flashare available in the git repository at:
Quoted 8 lines
Quoted 1 line
git://git.denx.de/u-boot-arm.gitnextI'm trying to review your patches, but:
Quoted 2 lines
Jean-Christophe PLAGNIOL-VILLARD (11):
afeb9260: fix macb device init??? This patch has never been posted on the ML before.
yes just after the precedent pull request
I'll resend
Quoted 6 lines
Quoted 2 lines
arm: unify lds
For this patch, neither the patch itself nor a URL which I can use to download the patch using "wget" or "ftp" or similar has ever been posted.
it's was more than 2 weeks ago
http://git.denx.de/?p=u-boot/u-boot-arm.git;a=commitdiff_plain;h=af9c0dff8877bca20a797234078b11c277f04c9d;hp=6df0610e020ea13b2177d732033d5b6b819ec6ed
Best Regards,
J.
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 14 lines · In message <[email protected]> you wrote:
Quoted 13 lines · Wolfgang Denk
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 9 lines · In message <[email protected]> you wrote:
Please pull
The following changes since commitcab6c2a6135cc8f4244d8e9c005bddd208d2a26f:
Wolfgang Denk (1):
TQM834x: use buffered writes to accelerate writing to flashare available in the git repository at:
git://git.denx.de/u-boot-arm.gitnext
Quoted 7 lines
Quoted 6 lines
I'm trying to review your patches, but:
Quoted 2 lines
Jean-Christophe PLAGNIOL-VILLARD (11):
afeb9260: fix macb device init??? This patch has never been posted on the ML before.
yes just after the precedent pull request
No, I don't see it in the mailing list archives.
Quoted 5 lines
Quoted 3 lines
For this patch, neither the patch itself nor a URL which I can use to download the patch using "wget" or "ftp" or similar has ever been posted.
it's was more than 2 weeks ago
http://git.denx.de/?p=u-boot/u-boot-arm.git;a=commitdiff_plain;h=af9c0dff8877bca20a797234078b11c277f04c9d;hp=6df0610e020ea13b2177d732033d5b6b819ec6ed
Thanks. Nevertheless, that's not a patch created by git-format-patch, and I don't have the usual stat lines that show me immediately the amount of changes and which files are affected and all that. Please play by the rules like we request from anybody else.
And can you please try and use complete words in the commit messages instead of home-made abbreviations? The phrase "use the same cpu lds" may make sense to you, but do not make much sense to me. I have no idea what a "cpu lds" is. Also s/overwrite/overwritten/.
Hmmm... and where is this "patch" supposed to be applied? arm-next" cannot be used as it's already in there.
Best regards,
Wolfgang Denk
Signature · 8 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "The net result is a system that is not only binary compatible with 4.3 BSD, but is even bug for bug compatible in almost all features." - Avadit Tevanian, Jr., "Architecture-Independent Virtual Memory Management for Parallel and Distributed Environments: The Mach Approach"
Quoted 33 lines · Wolfgang Denk
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 14 lines · In message <[email protected]> you wrote:
Quoted 13 lines · Wolfgang Denk
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 9 lines · In message <[email protected]> you wrote:
Please pull
The following changes since commitcab6c2a6135cc8f4244d8e9c005bddd208d2a26f:
Wolfgang Denk (1):
TQM834x: use buffered writes to accelerate writing to flashare available in the git repository at:
git://git.denx.de/u-boot-arm.gitnextQuoted 7 lines
Quoted 6 lines
I'm trying to review your patches, but:
Quoted 2 lines
Jean-Christophe PLAGNIOL-VILLARD (11):
afeb9260: fix macb device init??? This patch has never been posted on the ML before.
yes just after the precedent pull request
No, I don't see it in the mailing list archives.
Quoted 5 lines
Quoted 3 lines
For this patch, neither the patch itself nor a URL which I can use to download the patch using "wget" or "ftp" or similar has ever been posted.
it's was more than 2 weeks ago
http://git.denx.de/?p=u-boot/u-boot-arm.git;a=commitdiff_plain;h=af9c0dff8877bca20a797234078b11c277f04c9d;hp=6df0610e020ea13b2177d732033d5b6b819ec6ed
Quoted 7 lines
Thanks. Nevertheless, that's not a patch created by git-format-patch, and I don't have the usual stat lines that show me immediately the amount of changes and which files are affected and all that. Please play by the rules like we request from anybody else.
And can you please try and use complete words in the commit messages instead of home-made abbreviations? The phrase "use the same cpu lds"
please lds is the extension use for the Linker Scripts I've send more than 20 patches with the same abbrevation
Quoted 3 lines
Hmmm... and where is this "patch" supposed to be applied? arm-next" cannot be used as it's already in there.
your own next
btw the stat line was present at it's first send and as I've said precedently all the Copyright was respected none was removed but merged in the final corresponding file I'll repast it
arm_config.mk | 2 +
board/actux1/config.mk | 2 +
board/actux2/config.mk | 2 +
board/actux3/config.mk | 2 +
board/actux4/u-boot.lds | 66 -----------------------
board/apollon/u-boot.lds | 63 ----------------------
board/armadillo/u-boot.lds | 55 --------------------
board/armltd/integratorap/config.mk | 6 --
board/armltd/integratorap/split_by_variant.sh | 4 --
board/armltd/integratorap/u-boot.lds.template | 53 -------------------
board/armltd/integratorcp/config.mk | 6 --
board/armltd/integratorcp/split_by_variant.sh | 4 --
board/armltd/integratorcp/u-boot.lds.template | 53 -------------------
board/armltd/versatile/u-boot.lds | 51 ------------------
board/assabet/u-boot.lds | 58 ---------------------
board/atmel/at91rm9200dk/u-boot.lds | 57 --------------------
board/atmel/at91rm9200ek/u-boot.lds | 56 --------------------
board/cerf250/u-boot.lds | 56 --------------------
board/cm4008/u-boot.lds | 56 --------------------
board/cm41xx/u-boot.lds | 56 --------------------
board/cmc_pu2/u-boot.lds | 57 --------------------
board/cradle/u-boot.lds | 56 --------------------
board/csb226/u-boot.lds | 56 --------------------
board/csb637/u-boot.lds | 56 --------------------
board/dave/B2/u-boot.lds | 58 ---------------------
board/davedenx/qong/u-boot.lds | 58 ---------------------
board/delta/u-boot.lds | 56 --------------------
board/dnp1110/u-boot.lds | 56 --------------------
board/ep7312/u-boot.lds | 56 --------------------
board/evb4510/u-boot.lds | 69 -------------------------
board/freescale/mx31ads/config.mk | 2 +
board/gcplus/u-boot.lds | 58 ---------------------
board/impa7/u-boot.lds | 56 --------------------
board/imx31_litekit/u-boot.lds | 59 ---------------------
board/imx31_phycore/u-boot.lds | 59 ---------------------
board/innokom/u-boot.lds | 56 --------------------
board/ixdp425/u-boot.lds | 56 --------------------
board/kb9202/u-boot.lds | 56 --------------------
board/lart/u-boot.lds | 56 --------------------
board/logodl/u-boot.lds | 56 --------------------
board/lpc2292sodimm/u-boot.lds | 55 --------------------
board/lpd7a40x/u-boot.lds | 57 --------------------
board/lubbock/u-boot.lds | 56 --------------------
board/m501sk/u-boot.lds | 55 --------------------
board/modnet50/u-boot.lds | 69 -------------------------
board/mp2usb/u-boot.lds | 56 --------------------
board/mpl/vcma9/u-boot.lds | 57 --------------------
board/mx1ads/u-boot.lds | 58 ---------------------
board/mx1fs2/u-boot.lds | 57 --------------------
board/netstar/u-boot.lds | 55 --------------------
board/ns9750dev/u-boot.lds | 59 ---------------------
board/omap1510inn/u-boot.lds | 57 --------------------
board/omap1610inn/u-boot.lds | 52 -------------------
board/omap2420h4/u-boot.lds | 59 ---------------------
board/omap5912osk/u-boot.lds | 52 -------------------
board/omap730p2/u-boot.lds | 52 -------------------
board/pleb2/u-boot.lds | 56 --------------------
board/prodrive/pdnb3/u-boot.lds | 56 --------------------
board/pxa255_idp/u-boot.lds | 56 --------------------
board/samsung/smdk2400/u-boot.lds | 57 --------------------
board/samsung/smdk2410/u-boot.lds | 57 --------------------
board/samsung/smdk6400/config.mk | 2 +
board/sbc2410x/u-boot.lds | 56 --------------------
board/scb9328/u-boot.lds | 57 --------------------
board/shannon/u-boot.lds | 56 --------------------
board/siemens/SMN42/u-boot.lds | 55 --------------------
board/st/nmdk8815/u-boot.lds | 51 ------------------
board/sx1/u-boot.lds | 57 --------------------
board/trab/config.mk | 2 +
board/trizepsiv/u-boot.lds | 56 --------------------
board/voiceblue/u-boot.lds | 56 --------------------
board/wepep250/u-boot.lds | 56 --------------------
board/xaeniax/u-boot.lds | 56 --------------------
board/xm250/u-boot.lds | 56 --------------------
board/xsengine/u-boot.lds | 56 --------------------
board/zylonite/u-boot.lds | 56 --------------------
cpu/arm1136/u-boot.lds | 64 +++++++++++++++++++++++
cpu/arm1176/u-boot.lds | 56 ++++++++++++++++++++
cpu/arm720t/u-boot.lds | 56 ++++++++++++++++++++
cpu/arm920t/u-boot.lds | 64 +++++++++++++++++++++++
cpu/arm925t/u-boot.lds | 59 +++++++++++++++++++++
cpu/arm926ejs/at91/config.mk | 1 -
cpu/arm926ejs/at91/u-boot.lds | 57 --------------------
cpu/arm926ejs/davinci/config.mk | 2 -
cpu/arm926ejs/davinci/u-boot.lds | 52 -------------------
cpu/arm926ejs/u-boot.lds | 56 ++++++++++++++++++++
cpu/arm946es/u-boot.lds | 56 ++++++++++++++++++++
cpu/arm_cortexa8/omap3/config.mk | 2 -
cpu/arm_cortexa8/{omap3 => }/u-boot.lds | 0
cpu/arm_intcm/u-boot.lds | 56 ++++++++++++++++++++
cpu/ixp/u-boot.lds | 56 ++++++++++++++++++++
cpu/lh7a40x/u-boot.lds | 56 ++++++++++++++++++++
cpu/pxa/u-boot.lds | 56 ++++++++++++++++++++
cpu/s3c44b0/u-boot.lds | 56 ++++++++++++++++++++
cpu/sa1100/u-boot.lds | 59 +++++++++++++++++++++
95 files changed, 764 insertions(+), 3816 deletions(-)Best Regards,
J.
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 10 lines · In message <[email protected]> you wrote:
Quoted 8 lines
Thanks. Nevertheless, that's not a patch created by git-format-patch, and I don't have the usual stat lines that show me immediately the amount of changes and which files are affected and all that. Please play by the rules like we request from anybody else.
And can you please try and use complete words in the commit messages instead of home-made abbreviations? The phrase "use the same cpu lds"
please lds is the extension use for the Linker Scripts I've send more than 20 patches with the same abbrevation
Yes, I know, and I finally did not stand it any longer. Can you please use normal language in all your patches/ I would highly appreciate if you could substitute "linker script" for "lds" (which nobody but you understands) in all patches that have not been applied to mainline yet.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de In general, if you think something isn't in Perl, try it out, because it usually is :-) - Larry Wall in <[email protected]>