Skip to contentSkip to conversation

ptrace: do_notify_parent_cldstop: fix the wrong ->nsproxy usage

PATCH In review Oleg Nesterov 4 participants 22 messages May 25, 2009 – Jun 17, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ptrace: do_notify_parent_cldstop: fix the wrong ->nsproxy usage

If the non-traced sub-thread calls do_notify_parent_cldstop(), we send the notification to group_leader->real_parent and we report group_leader's pid.

But, if group_leader is traced we use the wrong ->parent->nsproxy->pid_ns, the tracer and parent can live in different namespaces. Change the code to use "parent" instead of tsk->parent.

kernel/signal.c renamed from kernel/signal.c~CLDSTOP_NS +1 -1
@@ -1496,7 +1496,7 @@ static void do_notify_parent_cldstop(str
 	 * see comment in do_notify_parent() abot the following 3 lines
 	 */
 	rcu_read_lock();
-	info.si_pid = task_pid_nr_ns(tsk, tsk->parent->nsproxy->pid_ns);
+	info.si_pid = task_pid_nr_ns(tsk, parent->nsproxy->pid_ns);
 	info.si_uid = __task_cred(tsk)->uid;
 	rcu_read_unlock();
 
#1 lore raw
Quoted 13 lines · Oleg Nesterov

If the non-traced sub-thread calls do_notify_parent_cldstop(), we send the notification to group_leader->real_parent and we report group_leader's pid.

But, if group_leader is traced we use the wrong ->parent->nsproxy->pid_ns, the tracer and parent can live in different namespaces. Change the code to use "parent" instead of tsk->parent.

kernel/signal.c static void do_notify_parent_cldstop(str · line 1499

Quoted 5 lines
kernel/signal.c renamed from kernel/signal.c~CLDSTOP_NS +1 -1
@@ -1496,7 +1496,7 @@ static void do_notify_parent_cldstop(str
 	 * see comment in do_notify_parent() abot the following 3 lines
 	 */
 	rcu_read_lock();
-	info.si_pid = task_pid_nr_ns(tsk, tsk->parent->nsproxy->pid_ns);
+	info.si_pid = task_pid_nr_ns(tsk, parent->nsproxy->pid_ns);

While this change is correct in any case (I hope), I wonder whether we need another one:

	--- a/kernel/signal.c
	+++ b/kernel/signal.c
	@@ -1483,12 +1483,12 @@ static void do_notify_parent_cldstop(str
		struct task_struct *parent;
		struct sighand_struct *sighand;
	 
	+	if (!task_ptrace(tsk))
	+		tsk = tsk->group_leader;
	+
	+	parent = tsk->real_parent;
		if (task_ptrace(tsk))
			parent = tsk->parent;
	-	else {
	-		tsk = tsk->group_leader;
	-		parent = tsk->real_parent;
	-	}
	 
		info.si_signo = SIGCHLD;
		info.si_errno = 0;

If the sub-thread is not traced, but ->group_leader is, perhaps it makes more sense to notify the leader's tracer, not parent?

Not that I think this is really important. Just curious about what was the intent.

Oleg.

Acked-by on v1 1/1
#4 lore raw
In reply to Oleg Nesterov

Yes, all cases setting .si_pid should set it using the pid_ns of the recipient. Numerous other cases look wrong too, though maybe Sukadev has outstanding patches for those already? (It's been a while since we went around on this, and I am fuzzy on some of the details.) ptrace_notify, ptrace_signal, sys_kill, do_tkill all look wrong to me. (Only sys_kill needs to solve the multiple-recipients problem.)

Thanks,
Roland

#5 lore raw
Quoted 8 lines · Roland McGrath

Yes, all cases setting .si_pid should set it using the pid_ns of the recipient. Numerous other cases look wrong too, though maybe Sukadev has outstanding patches for those already? (It's been a while since we went around on this, and I am fuzzy on some of the details.) ptrace_notify, ptrace_signal,

Yes. Perhaps it would be nice to add a helper,

	task_pid_xxx(struct task_struct child, struct task_struct *parent)
	{
		rcu_read_lock();
		ret = task_pid_nr_ns(tsk, parent->nsproxy->pid_ns);
		rcu_read_unlock();

		return ret;
	}

ptrace_notify/ptrace_signal can race with untrace + clear ->nsproxy, probably we don't care.

Quoted 1 line

sys_kill, do_tkill all look wrong to me.

They should be fine, note the

	if (from_ancestor_ns)
		q->info.si_pid = 0;

in __send_signal(). If we send the signal "down" to the sub-namespace, si_pid == 0 is correct. And, unlike do_notify_parent/ptrace_notify/etc kill/tkill can't send the signal "up".

Oleg.

#6 lore raw
Quoted 1 line

Yes. Perhaps it would be nice to add a helper,

I agree.

Quoted 10 lines
Quoted 1 line

sys_kill, do_tkill all look wrong to me.

They should be fine, note the

	if (from_ancestor_ns)
		q->info.si_pid = 0;

in __send_signal(). If we send the signal "down" to the sub-namespace, si_pid == 0 is correct. And, unlike do_notify_parent/ptrace_notify/etc kill/tkill can't send the signal "up".

Ah, right. I knew there was something around this I was forgetting.

Thanks,
Roland

#2 lore raw
In reply to Oleg Nesterov
Quoted 2 lines

While this change is correct in any case (I hope), I wonder whether we need another one:

[...]

Quoted 2 lines

If the sub-thread is not traced, but ->group_leader is, perhaps it makes more sense to notify the leader's tracer, not parent?

I don't think so.

Quoted 2 lines

Not that I think this is really important. Just curious about what was the intent.

Here is how I would describe the intent (admittedly this logic is retrospective, not necessarily articulated as such when the code was written). If the the triggering task is ptrace'd, this report is "for ptrace purposes"--even if it's the CLD_STOPPED case. Otherwise, what's being reported is "the whole POSIX process is now stopped as per POSIX definitions". The latter properly goes to the parent of the process, which is the group_leader->real_parent.

Thanks,
Roland

#14 lore raw
In reply to Roland McGrath
Quoted 2 lines · Roland McGrath

I didn't remove this ack to remind Andrew about this patch ;)

Quoted 1 line

ptrace_notify, ptrace_signal,

Actually, ptrace_signal() is fine wrt pid_ns. task_pid_vnr(current->parent) returns 0 if the tracer is not seen from the tracee's namespace, this is correct. So, afaics only ptrace_notify() needs the (low priority) fix.

Oleg.

#15 lore raw
Quoted 3 lines

Actually, ptrace_signal() is fine wrt pid_ns. task_pid_vnr(current->parent) returns 0 if the tracer is not seen from the tracee's namespace, this is correct. So, afaics only ptrace_notify() needs the (low priority) fix.

Oh, both are correct. Sorry. These are signals received by tracee, which is current, so task_pid_vnr() dtrt.

Thanks,
Roland

#16 lore raw
Quoted 7 lines · Roland McGrath
Quoted 4 lines

Actually, ptrace_signal() is fine wrt pid_ns. task_pid_vnr(current->parent) returns 0 if the tracer is not seen from the tracee's namespace, this is correct. So, afaics only ptrace_notify() needs the (low priority) fix.

Oh, both are correct. Sorry. These are signals received by tracee, which is current, so task_pid_vnr() dtrt.

No, task_pid_vnr(current) in ptrace_notify() is not right. If the tracer does PTRACE_GETSIGINFO it gets the wrong .si_pid.

Oleg.

#17 lore raw
Quoted 2 lines

No, task_pid_vnr(current) in ptrace_notify() is not right. If the tracer does PTRACE_GETSIGINFO it gets the wrong .si_pid.

I don't follow. PTRACE_GETSIGINFO gets the tracee's siginfo_t data--modulo 32/64 conversions it's the data structure the tracee process sees on its stack when running a handler. It's not like a signal sent into the tracer's queue (like SIGCHLD in do_notify_*), where the kernel doing translation to the tracer's context makes sense. It's more like some memory you read from the tracee.

Thanks,
Roland

#3 lore raw
In reply to Roland McGrath
Quoted 8 lines · Roland McGrath
Quoted 3 lines

While this change is correct in any case (I hope), I wonder whether we need another one:

[...]

Quoted 2 lines

If the sub-thread is not traced, but ->group_leader is, perhaps it makes more sense to notify the leader's tracer, not parent?

I don't think so.

Agreed.

Quoted 10 lines
Quoted 2 lines

Not that I think this is really important. Just curious about what was the intent.

Here is how I would describe the intent (admittedly this logic is retrospective, not necessarily articulated as such when the code was written). If the the triggering task is ptrace'd, this report is "for ptrace purposes"--even if it's the CLD_STOPPED case. Otherwise, what's being reported is "the whole POSIX process is now stopped as per POSIX definitions". The latter properly goes to the parent of the process, which is the group_leader->real_parent.

Yes. And I forgot that in this case the traced group_leader has already reported CLD_STOPPED to tracer.

Oleg.

#18 lore raw
In reply to Roland McGrath
Quoted 10 lines · Roland McGrath
Quoted 3 lines

No, task_pid_vnr(current) in ptrace_notify() is not right. If the tracer does PTRACE_GETSIGINFO it gets the wrong .si_pid.

I don't follow. PTRACE_GETSIGINFO gets the tracee's siginfo_t data--modulo 32/64 conversions it's the data structure the tracee process sees on its stack when running a handler. It's not like a signal sent into the tracer's queue (like SIGCHLD in do_notify_*), where the kernel doing translation to the tracer's context makes sense. It's more like some memory you read from the tracee.

Yes, but the (minor and low priority) problem is that .si_pid recorded in ->last_siginfo does not match the tracee's pid from the tracer pov (if they run in different namespaces).

Suppose that that we trace the task from the sub-namespace. We see its pid == 100, but when this tracee calls ptrace_notify() it does info.si_pid = task_pid_vnr(current), and task_pid_vnr() returns (say) 10.

Oleg.

#19 lore raw
Quoted 3 lines

Yes, but the (minor and low priority) problem is that .si_pid recorded in ->last_siginfo does not match the tracee's pid from the tracer pov (if they run in different namespaces).

That is not a problem, it's how it's supposed to be. That's what I was just saying. This is information about the values seen by the debugged process. Any translation to things meaningful in different contexts it outside the scope of ptrace.

Thanks,
Roland

#20 lore raw
Quoted 8 lines · Roland McGrath
Quoted 4 lines

Yes, but the (minor and low priority) problem is that .si_pid recorded in ->last_siginfo does not match the tracee's pid from the tracer pov (if they run in different namespaces).

That is not a problem, it's how it's supposed to be. That's what I was just saying. This is information about the values seen by the debugged process.

Ah, OK then.

I misunderstood you.

Oleg.

Acked-by on v1 1/1
#21 lore raw
In reply to Oleg Nesterov

Oleg Nesterov [[email protected]] wrote:

| If the non-traced sub-thread calls do_notify_parent_cldstop(), we send the
| notification to group_leader->real_parent and we report group_leader's pid.
| 
| But, if group_leader is traced we use the wrong ->parent->nsproxy->pid_ns,
| the tracer and parent can live in different namespaces. Change the code
| to use "parent" instead of tsk->parent.
| 
| Signed-off-by: Oleg Nesterov <[email protected]>
| 
| --- PTRACE/kernel/signal.c~CLDSTOP_NS	2009-05-25 20:24:50.000000000 +0200
| +++ PTRACE/kernel/signal.c	2009-05-25 20:33:37.000000000 +0200
| @@ -1496,7 +1496,7 @@ static void do_notify_parent_cldstop(str
|  	 * see comment in do_notify_parent() abot the following 3 lines
|  	 */
|  	rcu_read_lock();
| -	info.si_pid = task_pid_nr_ns(tsk, tsk->parent->nsproxy->pid_ns);
| +	info.si_pid = task_pid_nr_ns(tsk, parent->nsproxy->pid_ns);
|  	info.si_uid = __task_cred(tsk)->uid;
|  	rcu_read_unlock();
| 
#7 lore raw
In reply to Roland McGrath

Roland McGrath [[email protected]] wrote:

| > Yes. Perhaps it would be nice to add a helper,
| 
| I agree.
| 
| > > sys_kill, do_tkill all look wrong to me.
| > 
| > They should be fine, note the
| > 
| > 	if (from_ancestor_ns)
| > 		q->info.si_pid = 0;
| > 
| > in __send_signal(). If we send the signal "down" to the sub-namespace,
| > si_pid == 0 is correct. And, unlike do_notify_parent/ptrace_notify/etc
| > kill/tkill can't send the signal "up".
| 
| Ah, right.  I knew there was something around this I was forgetting.

Setting si_pid to task_tgid_vnr(current); in places like do_tkill() is slightly misleading bc, it can get modified later in send_signal(). We can't set si_pid correctly in do_tkill() since we must first establish pid-namespace relationship and that can mess up control flow.

Maybe a comment will help.

#8 lore raw

Hi,

I want to inform 2.6.29 signal issues,
As per my understanding I have noticed that if there is a delay (sleep/nanosleep/usleep) in the child process. Child could not reporting exit status to parent at this situation parent is waiting for ever by combinations of SIGSTOP and SIGCONT. So test cases are reporting as HUNG.

Here I have attached open posix test cases which are reported as HUNG with 2.6.29 kernels. 1.ltp/testcases/open_posix_testsuite/conformance/interfaces/clock_nanosleep/1-5.c 2.ltp/testcases/open_posix_testsuite/conformance/interfaces/nanosleep/3-2.c

ARCH: ARM
KERNEL: 2.6.29.1
Glibc: 2.9
Gcc: 4.3.3

/*****************************************************************/
open_posix_testsuite/conformance/interfaces/clock_nanosleep/1-5.c

/*****************************************************************/ /*
* Copyright (c) 2002-3, Intel Corporation. All rights reserved.
* Created by: julie.n.fleischer REMOVE-THIS AT intel DOT com
* This file is licensed under the GPL license. For the full content
* of this license, see the COPYING file at the top level of this
* source tree.

* Test that clock_nanosleep() does not stop if a signal is received
* that has no signal handler. clock_nanosleep() should still respond
* to the signal, but should resume after a SIGCONT signal is received. *
* SIGSTOP will be used to stop the sleep.
*/
#include <stdio.h>
#include <time.h>
#include <signal.h>
#include <unistd.h>
#include <sys/wait.h>
#include <stdlib.h>

#define PTS_PASS        0
#define PTS_FAIL        1
#define PTS_UNRESOLVED  2

#define PTS_UNSUPPORTED 4
#define PTS_UNTESTED 5

#define SLEEPSEC 5

#define CHILDPASS 1
#define CHILDFAIL 0

int main(int argc, char *argv[])

{
	int pid, slepts;
	struct timespec tsbefore, tsafter;

	if (clock_gettime(CLOCK_REALTIME, &tsbefore) != 0) {
		perror("clock_gettime() did not return success\n");
		return PTS_UNRESOLVED;
	}


	if ((pid = fork()) == 0) {
		/* child here */
		struct timespec tssleep;

		tssleep.tv_sec=SLEEPSEC;
		tssleep.tv_nsec=0;
		if (clock_nanosleep(CLOCK_REALTIME, 0, &tssleep, NULL) == 0) {
			printf("clock_nanosleep() returned success\n");
			return CHILDPASS;
		} else {
			printf("clock_nanosleep() did not return success\n");
			return CHILDFAIL;
		}
		return CHILDFAIL;
	} else {
		/* parent here */
		int i;

		sleep(1);

		if (kill(pid, SIGSTOP) != 0) {
			printf("Could not raise SIGSTOP\n");
			return PTS_UNRESOLVED;
		}

		if (kill(pid, SIGCONT) != 0) {
			printf("Could not raise SIGCONT\n");
			return PTS_UNRESOLVED;
		}

		if (wait(&i) == -1) {
			perror("Error waiting for child to exit\n");
			return PTS_UNRESOLVED;
		}

		if (!WIFEXITED(i) || !WEXITSTATUS(i)) {
			printf("Test FAILED\n");
			return PTS_FAIL;
		}

		if (clock_gettime(CLOCK_REALTIME, &tsafter) == -1) {
			perror("Error in clock_gettime()\n");
			return PTS_UNRESOLVED;
		}

		slepts=tsafter.tv_sec-tsbefore.tv_sec;
#ifdef DEBUG
		printf("Start %d sec; End %d sec\n", (int) tsbefore.tv_sec,
				(int) tsafter.tv_sec);
#endif
		if (slepts >= SLEEPSEC) {
			printf("Test PASSED\n");
			return PTS_PASS;
		} else {
			printf("clock_nanosleep() did not sleep long enough\n");
			return PTS_FAIL;
		}

	} //end fork

	return PTS_UNRESOLVED;
}

/*****************************************************************/
open_posix_testsuite/conformance/interfaces/nanosleep/3-2.c

/*****************************************************************/ /*
* Copyright (c) 2002, Intel Corporation. All rights reserved.
* Created by: julie.n.fleischer REMOVE-THIS AT intel DOT com
* This file is licensed under the GPL license. For the full content
* of this license, see the COPYING file at the top level of this
* source tree.
*
* Regression test motivated by an LKML discussion. Test that nanosleep()
* can be interrupted and then continue.
*/
#include <stdio.h>
#include <time.h>
#include <signal.h>
#include <unistd.h>
#include <sys/wait.h>
#include <stdlib.h>

#define PTS_PASS        0
#define PTS_FAIL        1
#define PTS_UNRESOLVED  2

#define PTS_UNSUPPORTED 4
#define PTS_UNTESTED 5

#define SLEEPSEC 5

#define CHILDPASS 0 //if interrupted, child will return 0 #define CHILDFAIL 1

int main(int argc, char *argv[])

{
	int pid, slepts;
	struct timespec tsbefore, tsafter;

	if (clock_gettime(CLOCK_REALTIME, &tsbefore) != 0) {
		perror("clock_gettime() did not return success\n");
		return PTS_UNRESOLVED;
	}


	if ((pid = fork()) == 0) {
		/* child here */
		struct timespec tssleep;

		tssleep.tv_sec=SLEEPSEC;
		tssleep.tv_nsec=0;
		if (nanosleep(&tssleep, NULL) == 0) {
			printf("nanosleep() returned success\n");
			return CHILDPASS;
		} else {
			printf("nanosleep() did not return success\n");
			return CHILDFAIL;
		}
		return CHILDFAIL;
	} else {
		/* parent here */
		int i;

		sleep(1);

		if (kill(pid, SIGSTOP) != 0) {
			printf("Could not raise SIGSTOP\n");
			return PTS_UNRESOLVED;
		}

		if (kill(pid, SIGCONT) != 0) {
			printf("Could not raise SIGCONT\n");
			return PTS_UNRESOLVED;
		}

		if (wait(&i) == -1) {
			perror("Error waiting for child to exit\n");
			return PTS_UNRESOLVED;
		}

		if (!WIFEXITED(i)) {
			printf("nanosleep() did not return 0\n");
			return PTS_FAIL;
		}

		if (clock_gettime(CLOCK_REALTIME, &tsafter) == -1) {
			perror("Error in clock_gettime()\n");
			return PTS_UNRESOLVED;
		}

		slepts=tsafter.tv_sec-tsbefore.tv_sec;

		printf("Start %d sec; End %d sec\n", (int) tsbefore.tv_sec,
				(int) tsafter.tv_sec);
		if (slepts >= SLEEPSEC) {
			printf("Test PASSED\n");
			return PTS_PASS;
		} else {
			printf("nanosleep() did not sleep long enough\n");
			return PTS_FAIL;
		}

	} //end fork

	return PTS_UNRESOLVED;
}

/*****************************************************************/

thanks for your time.

Best regards,
Naresh Kamboju

Quoted 30 lines · Sukadev Bhattiprolu

Roland McGrath [[email protected]] wrote:

| > Yes. Perhaps it would be nice to add a helper,
|
| I agree.
|
| > > sys_kill, do_tkill all look wrong to me.
| >
| > They should be fine, note the
| >
| >     if (from_ancestor_ns)
| >             q->info.si_pid = 0;
| >
| > in __send_signal(). If we send the signal "down" to the sub-namespace,
| > si_pid == 0 is correct. And, unlike do_notify_parent/ptrace_notify/etc
| > kill/tkill can't send the signal "up".
|
| Ah, right.  I knew there was something around this I was forgetting.

Setting si_pid to task_tgid_vnr(current); in places like do_tkill() is slightly misleading bc, it can get modified later in send_signal().  We can't set si_pid correctly in do_tkill() since we must first establish pid-namespace relationship and that can mess up control flow.

Maybe a comment will help.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

#9 lore raw

This has absolutely nothing to do with the patch/thread you replied to. Post about your signals issues separately.

#10 lore raw

open_posix_testsuite: STOP + CONT + wait hang?

In reply to naresh kamboju

(change the subject)

Quoted 7 lines · naresh kamboju

I want to inform 2.6.29 signal issues,
As per my understanding I have noticed that if there is a delay (sleep/nanosleep/usleep) in the child process. Child could not reporting exit status to parent at this situation parent is waiting for ever by combinations of SIGSTOP and SIGCONT. So test cases are reporting as HUNG.

Thanks for report, but please provide more info.

Quoted 1 line

ARCH: ARM

is it ARM specific? I can't reproduce the problem on x86.

Quoted 1 line

KERNEL: 2.6.29.1

did you try other kernel versions?

Quoted 1 line

#define SLEEPSEC 5

...

Quoted 23 lines
	if ((pid = fork()) == 0) {
		/* child here */
		struct timespec tssleep;

		tssleep.tv_sec=SLEEPSEC;
		tssleep.tv_nsec=0;
		if (clock_nanosleep(CLOCK_REALTIME, 0, &tssleep, NULL) == 0) {
			printf("clock_nanosleep() returned success\n");
			return CHILDPASS;
		} else {
			printf("clock_nanosleep() did not return success\n");
			return CHILDFAIL;
		}
		return CHILDFAIL;
	} else {
		/* parent here */
		int i;

		sleep(1);

		if (kill(pid, SIGSTOP) != 0) {
			printf("Could not raise SIGSTOP\n");
			return PTS_UNRESOLVED;
Quoted 8 lines
		}

		if (kill(pid, SIGCONT) != 0) {
			printf("Could not raise SIGCONT\n");
			return PTS_UNRESOLVED;
		}

		if (wait(&i) == -1) {

And I guess it hangs here, right?

The child should sleep SLEEPSEC seconds then exit, so the whole test-case should take SLEEPSEC seconds too.

Do you mean it really hangs and never completes?

Can you confirm it hangs in wait() ?

Does the child print "returned success" ?

If you can reproduce the problem, please send the content of /proc/CHILD_PID/status and /proc/PARENT_PID/status.

Oleg.

#11 lore raw

Re: open_posix_testsuite: STOP + CONT + wait hang?

Hi Oleg,

please find inline comments

Quoted 11 lines · Oleg Nesterov

(change the subject)

Quoted 7 lines · naresh kamboju

I want to inform 2.6.29 signal issues,
As per my understanding I have noticed that if there is a delay (sleep/nanosleep/usleep) in the child process. Child could not reporting exit status to parent at this situation parent is waiting for ever by combinations of SIGSTOP and SIGCONT. So test cases are reporting as HUNG.

Quoted 5 lines

Thanks for report, but please provide more info.

Quoted 1 line

ARCH: ARM

is it ARM specific? I can't reproduce the problem on x86.

yes it is specific to ARM. test cases are PASSED on X86-2.6.29 Kernels.

Quoted 4 lines
Quoted 2 lines

KERNEL: 2.6.29.1

did you try other kernel versions?

i have tried on 2.6.23 kernels it is PASSED on both ARM and X68.

Quoted 28 lines
Quoted 2 lines

#define SLEEPSEC 5

...

Quoted 25 lines

      if ((pid = fork()) == 0) {
              /* child here */
              struct timespec tssleep;

              tssleep.tv_sec=SLEEPSEC;
              tssleep.tv_nsec=0;
              if (clock_nanosleep(CLOCK_REALTIME, 0, &tssleep, NULL) == 0) { printf("clock_nanosleep() returned success\n"); return CHILDPASS;
              } else {
                      printf("clock_nanosleep() did not return success\n"); return CHILDFAIL;
              }
              return CHILDFAIL;
      } else {
              /* parent here */
              int i;

              sleep(1);

              if (kill(pid, SIGSTOP) != 0) { printf("Could not raise SIGSTOP\n"); return PTS_UNRESOLVED;
              }

Quoted 8 lines
Quoted 6 lines

              if (kill(pid, SIGCONT) != 0) { printf("Could not raise SIGCONT\n"); return PTS_UNRESOLVED;
              }

              if (wait(&i) == -1) {

And I guess it hangs here, right?

yes.
it is hangs here.
wait4(-1, Process 464 suspended

Quoted 3 lines

The child should sleep SLEEPSEC seconds then exit, so the whole test-case should take SLEEPSEC seconds too.

yes. that is the expected.

Quoted 3 lines

Do you mean it really hangs and never completes?

yes. it is hangs and never completes.

Quoted 2 lines

Can you confirm it hangs in wait() ?

yes. wait4() syscall is waiting for child status.

Quoted 2 lines

Does the child print "returned success" ?

it is not notifying parent about its exit status.

Quoted 3 lines

If you can reproduce the problem, please send the content of /proc/CHILD_PID/status and /proc/PARENT_PID/status.

i have attached strace and proc_log
please review the same.

Best regards
Naresh Kamboju

Quoted 2 lines

Oleg.

execve("./3-2.test", ["./3-2.test"], [/* 10 vars */]) = 0
brk(0) = 0x11000
uname({sys="Linux", node="43.88.101.211", ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x4001d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/devel/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=13962, ...}) = 0 mmap2(NULL, 13962, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001e000
close(3) = 0
open("/devel/lib/libpthread.so.0", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0008B\0\0004\0\0\0\200"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=805190, ...}) = 0 mmap2(NULL, 127472, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x40026000
mprotect(0x4003a000, 32768, PROT_NONE) = 0
mmap2(0x40042000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14) = 0x40042000 mmap2(0x40044000, 4592, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40044000
close(3) = 0
open("/devel/lib/librt.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\240\26\0\0004\0\0\0\4"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=163621, ...}) = 0 mmap2(NULL, 57876, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x40046000
mprotect(0x4004c000, 28672, PROT_NONE) = 0
mmap2(0x40053000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40053000
close(3) = 0
open("/devel/lib/libm.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\2601\0\0004\0\0\0\324"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1349258, ...}) = 0 mmap2(NULL, 688288, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x40055000
mprotect(0x400f5000, 28672, PROT_NONE) = 0
mmap2(0x400fc000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9f) = 0x400fc000
close(3) = 0
open("/devel/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0 R\1\0004\0\0\0\204"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=7855285, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x40022000
mmap2(NULL, 1249800, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x400fe000
mprotect(0x40223000, 28672, PROT_NONE) = 0
mmap2(0x4022a000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x124) = 0x4022a000 mmap2(0x4022d000, 8712, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4022d000
close(3) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x40023000
set_tls(0x40022c80, 0x40022c80, 0x67c, 0x40023358, 0x40025048) = 0

mprotect(0x4022a000, 8192, PROT_READ)   = 0
mprotect(0x400fc000, 4096, PROT_READ)   = 0
mprotect(0x40053000, 4096, PROT_READ)   = 0
mprotect(0x40042000, 4096, PROT_READ)   = 0
mprotect(0x40024000, 4096, PROT_READ)   = 0
munmap(0x4001e000, 13962)               = 0
set_tid_address(0x40022828)             = 464
set_robust_list(0x40022830, 0xc)        = 0

rt_sigaction(SIGRTMIN, {0x4002a128, [], SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x40029ce8, [], SA_RESTART|SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 clock_gettime(CLOCK_REALTIME, {1245240048, 291313608}) = 0 clone(Process 465 attached (waiting for parent)
Process 465 resumed (parent 464 ready)
child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x40022828) = 465

[pid   465] nanosleep({5, 0},  <unfinished ...>
[pid   464] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid   464] rt_sigaction(SIGCHLD, NULL, {SIG_DFL, [], 0}, 8) = 0
[pid   464] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid   464] nanosleep({1, 0}, {1, 0})   = 0
[pid   464] kill(465, SIGSTOP <unfinished ...>
[pid   465] <... nanosleep resumed> 0)  = ? ERESTART_RESTARTBLOCK (To
be restarted)
[pid   465] --- SIGSTOP (Stopped (signal)) @ 0 (0) ---
[pid   465] --- SIGSTOP (Stopped (signal)) @ 0 (0) ---
[pid   464] <... kill resumed> )        = 0
[pid   464] kill(465, SIGCONT)          = 0
[pid   464] wait4(-1, Process 464 suspended

<unfinished ...>
[pid 465] --- SIGCONT (Continued) @ 0 (0) ---

/**************************************************************/

-bash-3.2# uname -a
Linux 2.6.29.2
-bash-3.2# cat proc/464/status

Name:   3-2.test
State:  T (tracing stop)
Tgid:   464
Pid:    464
PPid:   462
TracerPid:      462
Uid:    0       0       0       0
Gid:    0       0       0       0
FDSize: 32
Groups: 0
VmPeak:     2332 kB
VmSize:     2316 kB
VmLck:         0 kB
VmHWM:       404 kB
VmRSS:       404 kB
VmData:       32 kB
VmStk:        84 kB
VmExe:         4 kB
VmLib:      2032 kB
VmPTE:         8 kB
Threads:        1
SigQ:   0/1024
SigPnd: 0000000000000000
ShdPnd: 0000000000000000
SigBlk: 0000000000000000
SigIgn: 0000000000000000
SigCgt: 0000000180000000
CapInh: 0000000000000000
CapPrm: fffffffffffffeff
CapEff: fffffffffffffeff
CapBnd: fffffffffffffeff
voluntary_ctxt_switches:        126
nonvoluntary_ctxt_switches:     31
-bash-3.2#
-bash-3.2# cat proc/465/status
Name:   3-2.test
State:  R (running)
Tgid:   465
Pid:    465
PPid:   464
TracerPid:      462
Uid:    0       0       0       0
Gid:    0       0       0       0
FDSize: 32
Groups: 0
VmPeak:     2316 kB
VmSize:     2316 kB
VmLck:         0 kB
VmHWM:       164 kB
VmRSS:       164 kB
VmData:       32 kB
VmStk:        84 kB
VmExe:         4 kB
VmLib:      2032 kB
VmPTE:         8 kB
Threads:        1
SigQ:   0/1024
SigPnd: 0000000000000000
ShdPnd: 0000000000000000
SigBlk: 0000000000000000
SigIgn: 0000000000000000
SigCgt: 0000000180000000
CapInh: 0000000000000000
CapPrm: fffffffffffffeff
CapEff: fffffffffffffeff
CapBnd: fffffffffffffeff
voluntary_ctxt_switches:        7
nonvoluntary_ctxt_switches:     36623

-bash-3.2#

Quoted 2 lines

-bash-3.2# uname -a
Linux 2.6.29.2
-bash-3.2# cat proc/464/status

Name:   3-2.test
State:  T (tracing stop)
Tgid:   464
Pid:    464
PPid:   462
TracerPid:      462
Uid:    0       0       0       0
Gid:    0       0       0       0
FDSize: 32
Groups: 0
VmPeak:     2332 kB
VmSize:     2316 kB
VmLck:         0 kB
VmHWM:       404 kB
VmRSS:       404 kB
VmData:       32 kB
VmStk:        84 kB
VmExe:         4 kB
VmLib:      2032 kB
VmPTE:         8 kB
Threads:        1
SigQ:   0/1024
SigPnd: 0000000000000000
ShdPnd: 0000000000000000
SigBlk: 0000000000000000
SigIgn: 0000000000000000
SigCgt: 0000000180000000
CapInh: 0000000000000000
CapPrm: fffffffffffffeff
CapEff: fffffffffffffeff
CapBnd: fffffffffffffeff
voluntary_ctxt_switches:        126
nonvoluntary_ctxt_switches:     31
-bash-3.2#
-bash-3.2# cat proc/465/status
Name:   3-2.test
State:  R (running)
Tgid:   465
Pid:    465
PPid:   464
TracerPid:      462
Uid:    0       0       0       0
Gid:    0       0       0       0
FDSize: 32
Groups: 0
VmPeak:     2316 kB
VmSize:     2316 kB
VmLck:         0 kB
VmHWM:       164 kB
VmRSS:       164 kB
VmData:       32 kB
VmStk:        84 kB
VmExe:         4 kB
VmLib:      2032 kB
VmPTE:         8 kB
Threads:        1
SigQ:   0/1024
SigPnd: 0000000000000000
ShdPnd: 0000000000000000
SigBlk: 0000000000000000
SigIgn: 0000000000000000
SigCgt: 0000000180000000
CapInh: 0000000000000000
CapPrm: fffffffffffffeff
CapEff: fffffffffffffeff
CapBnd: fffffffffffffeff
voluntary_ctxt_switches:        7
nonvoluntary_ctxt_switches:     36623

-bash-3.2#

execve("./3-2.test", ["./3-2.test"], [/* 10 vars */]) = 0
brk(0) = 0x11000
uname({sys="Linux", node="43.88.101.211", ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/devel/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=13962, ...}) = 0
mmap2(NULL, 13962, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001e000
close(3) = 0
open("/devel/lib/libpthread.so.0", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0008B\0\0004\0\0\0\200"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=805190, ...}) = 0
mmap2(NULL, 127472, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40026000 mprotect(0x4003a000, 32768, PROT_NONE) = 0

mmap2(0x40042000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14) = 0x40042000
mmap2(0x40044000, 4592, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40044000

close(3) = 0
open("/devel/lib/librt.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\240\26\0\0004\0\0\0\4"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=163621, ...}) = 0
mmap2(NULL, 57876, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40046000 mprotect(0x4004c000, 28672, PROT_NONE) = 0
mmap2(0x40053000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40053000
close(3) = 0
open("/devel/lib/libm.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\2601\0\0004\0\0\0\324"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1349258, ...}) = 0
mmap2(NULL, 688288, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40055000 mprotect(0x400f5000, 28672, PROT_NONE) = 0
mmap2(0x400fc000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9f) = 0x400fc000
close(3) = 0
open("/devel/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0 R\1\0004\0\0\0\204"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=7855285, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40022000 mmap2(NULL, 1249800, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x400fe000 mprotect(0x40223000, 28672, PROT_NONE) = 0
mmap2(0x4022a000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x124) = 0x4022a000 mmap2(0x4022d000, 8712, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4022d000
close(3) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40023000 set_tls(0x40022c80, 0x40022c80, 0x67c, 0x40023358, 0x40025048) = 0

mprotect(0x4022a000, 8192, PROT_READ)   = 0
mprotect(0x400fc000, 4096, PROT_READ)   = 0
mprotect(0x40053000, 4096, PROT_READ)   = 0
mprotect(0x40042000, 4096, PROT_READ)   = 0
mprotect(0x40024000, 4096, PROT_READ)   = 0
munmap(0x4001e000, 13962)               = 0
set_tid_address(0x40022828)             = 464
set_robust_list(0x40022830, 0xc)        = 0

rt_sigaction(SIGRTMIN, {0x4002a128, [], SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x40029ce8, [], SA_RESTART|SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 clock_gettime(CLOCK_REALTIME, {1245240048, 291313608}) = 0
clone(Process 465 attached (waiting for parent)
Process 465 resumed (parent 464 ready)
child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x40022828) = 465

[pid   465] nanosleep({5, 0},  <unfinished ...>
[pid   464] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid   464] rt_sigaction(SIGCHLD, NULL, {SIG_DFL, [], 0}, 8) = 0
[pid   464] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid   464] nanosleep({1, 0}, {1, 0})   = 0
[pid   464] kill(465, SIGSTOP <unfinished ...>
[pid   465] <... nanosleep resumed> 0)  = ? ERESTART_RESTARTBLOCK (To be restarted)
[pid   465] --- SIGSTOP (Stopped (signal)) @ 0 (0) ---
[pid   465] --- SIGSTOP (Stopped (signal)) @ 0 (0) ---
[pid   464] <... kill resumed> )        = 0
[pid   464] kill(465, SIGCONT)          = 0
[pid   464] wait4(-1, Process 464 suspended

<unfinished ...>
[pid 465] --- SIGCONT (Continued) @ 0 (0) ---

#12 lore raw

Re: open_posix_testsuite: STOP + CONT + wait hang?

Quoted 2 lines · naresh kamboju

please find inline comments

Thanks Naresh.

Quoted 4 lines
Quoted 3 lines
Quoted 1 line

ARCH: ARM

is it ARM specific? I can't reproduce the problem on x86.

yes it is specific to ARM. test cases are PASSED on X86-2.6.29 Kernels.

Not good, because I know nothing about arm and don't have the arm machine ;) Will try to look...

Quoted 5 lines
Quoted 2 lines

If you can reproduce the problem, please send the content of /proc/CHILD_PID/status and /proc/PARENT_PID/status.

i have attached strace and proc_log
please review the same.

Thanks.

Could you reproduce without strace, and send the output of /proc/xxx/status ? I don't really expect we will see something interesting, but just in case.

Also, the output of sysrq-t may help. (the part which relates to these 2 processes).

Oleg.

#13 lore raw

Re: open_posix_testsuite: STOP + CONT + wait hang?

Thank you very much.
just before i have reported the same issue to ARM Kernel mailing list.

Best regards,
Naresh Kamboju

Quoted 31 lines · Oleg Nesterov
Quoted 2 lines · naresh kamboju

please find inline comments

Thanks Naresh.

Quoted 4 lines
Quoted 3 lines
Quoted 1 line

ARCH: ARM

is it ARM specific? I can't reproduce the problem on x86.

yes it is specific to ARM. test cases are PASSED on X86-2.6.29 Kernels.

Not good, because I know nothing about arm and don't have the arm machine ;) Will try to look...

Quoted 5 lines
Quoted 2 lines

If you can reproduce the problem, please send the content of /proc/CHILD_PID/status and /proc/PARENT_PID/status.

i have attached  strace and proc_log
please review the same.

Thanks.

Could you reproduce without strace, and send the output of /proc/xxx/status ? I don't really expect we will see something interesting, but just in case.

Also, the output of sysrq-t may help. (the part which relates to these 2 processes).

Oleg.