Failed to activate snapshot exception store.
HI
I'm running into some problems with lvm on redhat. I'm trying to create a snapshot but gives always a error " Aborting. Failed to activate snapshot exception store."
Also when I try to create a new volume and create new logical volumes I get the same error
This is the output of the lvcreate -s and vgdisplay Any ideas/hints are apreciated
Thanks
Jose Nuno Neto
lvcreate --test -L 504M -n SnapTest -i2 -s /dev/vgdb/lvdb02
Test mode: Metadata will NOT be updated.
Using default stripesize 64.00 KB
Rounding size (63 extents) up to stripe boundary size (64 extents) Aborting. Failed to activate snapshot exception store.
--- Volume group ---
VG Name vgdb
System ID
Format lvm2 Metadata Areas 5 Metadata Sequence No 126 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 5 Act PV 5 VG Size 249.96 GB PE Size 8.00 MB Total PE 31995 Alloc PE / Size 30976 / 242.00 GB Free PE / Size 1019 / 7.96 GB VG UUID FqqBnv-EKiI-TXA2-GR3C-b4i0-XTeq-xPxpVa
--- Logical volume ---
LV Name /dev/vgdb/lvdb01 VG Name vgdb LV UUID 0F2fNt-m2n5-MpJ8-dMNS-Xwzb-QsvS-LyHefm LV Write Access read/write LV Status available # open 1 LV Size 2.00 GB Current LE 256 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:4
--- Logical volume ---
LV Name /dev/vgdb/lvdb02 VG Name vgdb LV UUID 7Q038a-7FfX-AhBo-djfL-chFO-MI3N-vzdcbo LV Write Access read/write LV Status available # open 1 LV Size 240.00 GB Current LE 30720 Segments 3 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:5
--- Physical volumes ---
PV Name /dev/sdh1 PV UUID 13EWPc-BeSd-w1ub-wbhM-c3Ff-pi7U-KWDkxr PV Status allocatable Total PE / Free PE 6399 / 0
PV Name /dev/sdi1 PV UUID 14OQ42-xq0w-xln5-z9ts-PHKF-goXA-X9qzTE PV Status allocatable Total PE / Free PE 6399 / 255
PV Name /dev/sdj1 PV UUID U3h5F6-g6Wt-MNMb-AHyy-BP2R-BWf1-6LNm55 PV Status allocatable Total PE / Free PE 6399 / 255
PV Name /dev/sdk1 PV UUID qkpbY5-dvGg-Z1Xb-3cEM-sidS-frbr-pCe8Bk PV Status allocatable Total PE / Free PE 6399 / 255
PV Name /dev/sdb1 PV UUID WtDVja-1Q9u-Tgr8-bCU3-qlqS-lahj-m1p2cU PV Status allocatable Total PE / Free PE 6399 / 254
Signature · 3 lines
This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
what happens if you remove the '--test' from your command?
brassow
Quoted 122 lines · jose nuno neto
HI
I'm running into some problems with lvm on redhat. I'm trying to create a snapshot but gives always a error " Aborting. Failed to activate snapshot exception store."
Also when I try to create a new volume and create new logical volumes I get the same error
This is the output of the lvcreate -s and vgdisplay Any ideas/hints are apreciated
Thanks
Jose Nuno Netolvcreate --test -L 504M -n SnapTest -i2 -s
/dev/vgdb/lvdb02Test mode: Metadata will NOT be updated.
Using default stripesize 64.00 KB
Rounding size (63 extents) up to stripe boundary size (64 extents) Aborting. Failed to activate snapshot exception store.--- Volume group ---
VG Name vgdb
System ID
Format lvm2
Metadata Areas 5
Metadata Sequence No 126
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 5
Act PV 5
VG Size 249.96 GB
PE Size 8.00 MB
Total PE 31995
Alloc PE / Size 30976 / 242.00 GB
Free PE / Size 1019 / 7.96 GB
VG UUID FqqBnv-EKiI-TXA2-GR3C-b4i0-XTeq-xPxpVa--- Logical volume ---
LV Name/dev/vgdb/lvdb01
VG Name vgdb
LV UUID 0F2fNt-m2n5-MpJ8-dMNS-Xwzb-QsvS-LyHefm
LV Write Access read/write
LV Status available# open 1 LV Size 2.00 GB Current LE 256 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:4--- Logical volume ---
LV Name/dev/vgdb/lvdb02
VG Name vgdb
LV UUID 7Q038a-7FfX-AhBo-djfL-chFO-MI3N-vzdcbo
LV Write Access read/write
LV Status available# open 1 LV Size 240.00 GB Current LE 30720 Segments 3 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:5--- Physical volumes ---
PV Name/dev/sdh1
PV UUID 13EWPc-BeSd-w1ub-wbhM-c3Ff-pi7U-KWDkxr
PV Status allocatable
Total PE / Free PE 6399 / 0PV Name
/dev/sdi1
PV UUID 14OQ42-xq0w-xln5-z9ts-PHKF-goXA-X9qzTE
PV Status allocatable
Total PE / Free PE 6399 / 255PV Name
/dev/sdj1
PV UUID U3h5F6-g6Wt-MNMb-AHyy-BP2R-BWf1-6LNm55
PV Status allocatable
Total PE / Free PE 6399 / 255PV Name
/dev/sdk1
PV UUID qkpbY5-dvGg-Z1Xb-3cEM-sidS-frbr-pCe8Bk
PV Status allocatable
Total PE / Free PE 6399 / 255PV Name
/dev/sdb1
PV UUID WtDVja-1Q9u-Tgr8-bCU3-qlqS-lahj-m1p2cU
PV Status allocatable
Total PE / Free PE 6399 / 254Signature · 7 lines
This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ linux-lvm mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Hi,
Thanks for the reply :-)
If I take the --test, yes the snapshot gets created
But if I try to create a new VG and after a new LV I get the same error. I can the work I was supposed to do, but would like to understand what's going on......
lvcreate -L 1G -n TEST vg_mysql_bk
Aborting. Failed to activate new LV to wipe the start of it.
vgdisplay -v vg_mysql_bk
Using volume group(s) on command line
Finding volume group "vg_mysql_bk"
--- Volume group ---
VG Name vg_mysql_bk
System ID
Format lvm2 Metadata Areas 1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV 0 Cur LV 0 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 250.00 GB PE Size 4.00 MB Total PE 63999 Alloc PE / Size 0 / 0 Free PE / Size 63999 / 250.00 GB VG UUID orekvq-dWqZ-uXs8-gETe-WkyG-adTO-YHdHPh
--- Physical volumes ---
PV Name /dev/sdl1 PV UUID pw80TN-xYP2-FY4T-ASWF-PpIe-j6vo-WNQTtG PV Status allocatable Total PE / Free PE 63999 / 63999
Quoted 128 lines · On Tuesday 26 May 2009 21:30:40 Jonathan Brassow wrote:
what happens if you remove the '--test' from your command?
brassow
Quoted 123 lines · jose nuno neto
HI
I'm running into some problems with lvm on redhat. I'm trying to create a snapshot but gives always a error " Aborting. Failed to activate snapshot exception store."
Also when I try to create a new volume and create new logical volumes I get the same error
This is the output of the lvcreate -s and vgdisplay Any ideas/hints are apreciated
Thanks
Jose Nuno Netolvcreate --test -L 504M -n SnapTest -i2 -s
/dev/vgdb/lvdb02Test mode: Metadata will NOT be updated.
Using default stripesize 64.00 KB
Rounding size (63 extents) up to stripe boundary size (64 extents) Aborting. Failed to activate snapshot exception store.--- Volume group ---
VG Name vgdb
System ID
Format lvm2
Metadata Areas 5
Metadata Sequence No 126
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 5
Act PV 5
VG Size 249.96 GB
PE Size 8.00 MB
Total PE 31995
Alloc PE / Size 30976 / 242.00 GB
Free PE / Size 1019 / 7.96 GB
VG UUID FqqBnv-EKiI-TXA2-GR3C-b4i0-XTeq-xPxpVa--- Logical volume ---
LV Name/dev/vgdb/lvdb01
VG Name vgdb
LV UUID 0F2fNt-m2n5-MpJ8-dMNS-Xwzb-QsvS-LyHefm
LV Write Access read/write
LV Status available# open 1 LV Size 2.00 GB Current LE 256 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:4--- Logical volume ---
LV Name/dev/vgdb/lvdb02
VG Name vgdb
LV UUID 7Q038a-7FfX-AhBo-djfL-chFO-MI3N-vzdcbo
LV Write Access read/write
LV Status available# open 1 LV Size 240.00 GB Current LE 30720 Segments 3 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:5--- Physical volumes ---
PV Name/dev/sdh1
PV UUID 13EWPc-BeSd-w1ub-wbhM-c3Ff-pi7U-KWDkxr
PV Status allocatable
Total PE / Free PE 6399 / 0PV Name
/dev/sdi1
PV UUID 14OQ42-xq0w-xln5-z9ts-PHKF-goXA-X9qzTE
PV Status allocatable
Total PE / Free PE 6399 / 255PV Name
/dev/sdj1
PV UUID U3h5F6-g6Wt-MNMb-AHyy-BP2R-BWf1-6LNm55
PV Status allocatable
Total PE / Free PE 6399 / 255PV Name
/dev/sdk1
PV UUID qkpbY5-dvGg-Z1Xb-3cEM-sidS-frbr-pCe8Bk
PV Status allocatable
Total PE / Free PE 6399 / 255PV Name
/dev/sdb1
PV UUID WtDVja-1Q9u-Tgr8-bCU3-qlqS-lahj-m1p2cU
PV Status allocatable
Total PE / Free PE 6399 / 254--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean. _______________________________________________ linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Signature · 3 lines
This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.