linux-image-2.6.30-1-686: unable to unmount a loop device
Quoted 20 lines · Jakub Wilk
Package: linux-image-2.6.30-1-686
Version: 2.6.30-1
Severity: normal# lsmod | grep -c loop 0# modprobe loop max_part=8# dd if=/dev/zero of=/tmp/fs bs=1M count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00407344 s, 257 MB/s# mke2fs -F -q /tmp/fs# mkdir /tmp/mnt/# mount -o loop /tmp/fs /tmp/mnt/
Quoted 11 lines
# umount /tmp/mnt/ [ 284.509864] BUG: unable to handle kernel NULL pointer dereference at 00000060 [ 284.509902] IP: [<c01f6f27>] blkdev_ioctl+0x25/0x842 [ 284.509929] *pde = 00000000 [ 284.509944] Oops: 0000 [#1] SMP [ 284.509963] last sysfs file: /sys/devices/virtual/block/loop0/removable [ 284.509980] Modules linked in: loop ext2 tun kvm_amd kvm binfmt_misc nf_conntrack_ipv6 ip6table_filter ip6_tables nvidiafb fb_ddc vgastate xt_MARK iptable_mangle iptable_nat nf_nat ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables fuse snd_hda_codec_realtek tvaudio tda7432 tuner_simple tuner_types tuner arc4 ecb snd_hda_intel snd_hda_codec bttv ir_common snd_hwdep i2c_algo_bit v4l2_common videodev v4l1_compat snd_pcm videobuf_dma_sg snd_seq snd_timer snd_seq_device rt61pci crc_itu_t rt2x00pci snd videobuf_core btcx_risc rt2x00lib soundcore snd_page_alloc led_class input_polldev mac80211 tveeprom cfg80211 eeprom_93cx6 i2c_nforce2 i2c_core evdev processor button k8temp serio_raw psmouse ext3 jbd mbcache ide_gd_mod ide_cd_mod cdrom ata_generic libata scsi_mod ide_pci_generic amd74xx forcedeth ide_core ohci_hcd ehci_hcd usbcore floppy thermal fan thermal_sys [last unloaded: loop] [ 284.510570] [ 284.510581] Pid: 3328, comm: umount Not tainted (2.6.30-1-686 #1) M61SME-S2 [ 284.510600] EIP: 0060:[<c01f6f27>] EFLAGS: 00010287 CPU: 1 [ 284.510617] EIP is at blkdev_ioctl+0x25/0x842
This matches the source line:
struct gendisk *disk = bdev->bd_disk;
Quoted 1 line
[ 284.510630] EAX: 00000000 EBX: 0000125f ECX: 0000125f EDX: 00000000
and bdev == NULL.
Quoted 12 lines
[ 284.510645] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: c3fefe08 [ 284.510662] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 284.510677] Process umount (pid: 3328, ti=c3fee000 task=c3d2e750 task.ti=c3fee000) [ 284.510694] Stack: [ 284.510704] c011dda9 c04ca6ec c3d2e750 c3cacc80 00000000 c3cacc80 c3cacc80 c04951c0 [ 284.510756] c031ce8e c38630c0 00000b00 c04951c0 00000000 00000212 00000000 c3d2e904 [ 284.510814] 00000001 00000246 3e1b71e2 00000042 c040c840 0000000c c017160e 0000000c [ 284.510876] Call Trace: [ 284.510886] [<c011dda9>] ? pick_next_task_fair+0x80/0x87 [ 284.510909] [<c031ce8e>] ? __schedule+0x719/0x746 [ 284.510931] [<c017160e>] ? release_pages+0x11c/0x124 [ 284.510953] [<c011cc82>] ? update_curr+0x58/0x178
Quoted 8 lines
[ 284.510973] [<c031cec0>] ? schedule+0x5/0x13 [ 284.510991] [<c031cfeb>] ? schedule_timeout+0x14/0xbd [ 284.511011] [<c011cf9e>] ? check_preempt_wakeup+0x139/0x173 [ 284.511031] [<c031c6c7>] ? wait_for_common+0xc1/0x112 [ 284.511051] [<c0121ee3>] ? default_wake_function+0x0/0x8 [ 284.511075] [<c01a9eac>] ? ioctl_by_bdev+0x20/0x2f [ 284.511096] [<f8463f90>] ? loop_clr_fd+0x186/0x1a2 [loop] [ 284.511119] [<f8463fdb>] ? lo_release+0x2f/0x53 [loop]
[...]
Since this change, lo_release() calls loop_clr_fd() with bdev = NULL:
commit bb21488482bd36eae6b30b014d93619063773fd4
Author: Al Viro <[email protected]> Date: Sun Mar 2 09:29:48 2008 -0500
[PATCH] switch loop
ioctl doesn't need BKL here
Signed-off-by Al Viro <[email protected]>
Most actions in loop_clr_fd() that use bdev were made conditional on bdev != NULL, with the exception of:
if (max_part > 0) ioctl_by_bdev(bdev, BLKRRPART, 0);
So I think that this if() needs to test bdev as well.
Ben.
Signature · 2 lines
Ben Hutchings It is impossible to make anything foolproof because fools are so ingenious.