mac80211: shorten the passive dwell time for sw scans
PATCH 1/1 mac80211: shorten the passive dwell time for sw scans
mac80211's software scan implementation uses a passive dwell time of (HZ / 5) which means we stay 200ms on each passive channel. Compared to iwlwifi's hw scan and the old ipw* drivers which use values around 120ms this is quite long.
Reducing the passive dwell time from 200ms to 125ms should save us something around a second on cards capable of 11a and we should still be able to catch beacons from most access points (assuming a ~100ms beacon interval).
Signed-off-by Helmut Schaa <[email protected]>
---
net/mac80211/scan.c +1 -1
@@ -26,7 +28,7 @@#define IEEE80211_PROBE_DELAY (HZ / 33)#define IEEE80211_CHANNEL_TIME (HZ / 33) -#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 5) +#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 8)struct ieee80211_bss * ieee80211_rx_bss_get(struct ieee80211_local *local, u8 *bssid, int freq,