2.6.29-stable review
Subsystems (26)
cover 2.6.29-stable review
This is the start of the stable review cycle for the 2.6.29.6 release.
This is going to be the last of the .29 kernel series releases, barring anything major happening.
There are 35 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a Signed-off-by: line to the patch, please respond with it.
These patches are sent out with a number of different people on the Cc:
line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.
Responses should be made by Friday, Jul 3, 00:00:00 2009 UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.29.6-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
Makefile | 2 +- arch/x86/kernel/cpu/amd.c | 4 +- arch/x86/kernel/reboot.c | 9 ++ arch/x86/kernel/setup.c | 15 +--- drivers/block/floppy.c | 8 ++ drivers/char/moxa.c | 7 ++- drivers/char/mxser.c | 2 +- drivers/char/pcmcia/cm4000_cs.c | 3 +- drivers/char/vt_ioctl.c | 3 +- drivers/firmware/memmap.c | 16 ++-- drivers/infiniband/hw/mlx4/qp.c | 4 + drivers/input/keyboard/atkbd.c | 169 +++++++++++++++++++++---------------- drivers/isdn/hisax/hfc_pci.c | 41 +++++++--- drivers/isdn/hisax/hisax.h | 2 +- drivers/md/dm-mpath.c | 11 +++ drivers/md/dm.c | 4 + drivers/md/raid5.c | 1 + drivers/net/bonding/bond_sysfs.c | 1 + drivers/net/r8169.c | 11 +-- drivers/parport/parport_pc.c | 34 ++++++-- drivers/parport/parport_serial.c | 30 ++++++- drivers/pci/pci.c | 7 +- drivers/pci/pcie/aspm.c | 4 + drivers/scsi/qla2xxx/qla_dbg.c | 2 +- drivers/serial/8250.c | 15 ++++ drivers/usb/class/usbtmc.c | 6 ++ drivers/video/atmel_lcdfb.c | 10 +-- fs/fs-writeback.c | 2 - fs/jbd/commit.c | 6 +- include/linux/firmware-map.h | 12 +-- include/linux/mlx4/qp.h | 1 + lib/Kconfig.debug | 2 +- mm/page_alloc.c | 6 +- net/mac80211/rc80211_minstrel.c | 2 +- sound/core/seq/seq_midi_event.c | 8 +- sound/pci/ca0106/ca0106_mixer.c | 6 ++ 36 files changed, 307 insertions(+), 159 deletions(-)
PATCH 4/35 jbd: fix race in buffer processing in commit code
2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jan Kara <[email protected]>
commit a61d90d75d0f9e86432c45b496b4b0fbf0fd03dc upstream.
In commit code, we scan buffers attached to a transaction. During this scan, we sometimes have to drop j_list_lock and then we recheck whether the journal buffer head didn't get freed by journal_try_to_free_buffers().
But checking for buffer_jbd(bh) isn't enough because a new journal head
could get attached to our buffer head. So add a check whether the journal head remained the same and whether it's still at the same transaction and list.
This is a nasty bug and can cause problems like memory corruption (use after free) or trigger various assertions in JBD code (observed).
--- fs/jbd/commit.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
fs/jbd/commit.c +4 -2
@@ -238,7 +238,7 @@ write_out_data:spin_lock (&journal->j_list_lock); }/* Someone already cleaned up the buffer? */ -if (!buffer_jbd (bh) +if (!buffer_jbd (bh) ||bh2jh (bh) != jh || jh->b_transaction != commit_transaction || jh->b_jlist != BJ_SyncData) {jbd_unlock_bh_state (bh);
@@ -466,7 +466,9 @@ void journal_commit_transaction(journal_spin_lock (&journal->j_list_lock);continue ; } -if (buffer_jbd (bh) && jh->b_jlist == BJ_Locked) { +if (buffer_jbd (bh) &&bh2jh (bh) == jh && + jh->b_transaction == commit_transaction && + jh->b_jlist == BJ_Locked) {__journal_unfile_buffer (jh);jbd_unlock_bh_state (bh);journal_remove_journal_head (bh);
PATCH 1/35 parport: netmos 9845 & 9855 1P4S fixes
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Philippe De Muyter <[email protected]>
commit 50db9d8e4ca17974595e3848cb65f9371a304de4 upstream.
netmos serial/parallel adapters come in different flavour differing only by the number of parallel and serial ports, which are encoded in the subdevice ID.
Last fix of Christian Pellegrin for 9855 2P2S broke support for 9855 1P4S, and works only by side-effect for the first parallel port of a 2P2S, as this first parallel port is found by reading the second addr entry of (struct parport_pc_pci) cards[netmos_9855], which is not initialized, and hence has value 0, which happens to be the BAR of the first parallel port.
netmos_9xx5_combo entry in (struct parport_pc_pci) cards[], which is used for a 9845 1P4S must also be fixed for the parallel port support when there are 4 serial ports because this entry currently gives 2 as BAR index for the parallel port. Actually, in this case, BAR 2 is the 3rd serial port while the parallel port is at BAR 4.
I fixed 9845 1P4S and 9855 1P4S support, while preserving 9855 2P2S support,
- by creating a netmos_9855_2p entry and using it for 9855 boards with 2 parallel ports : 9855 2P2S and 9855 2P0S boards,
- and by allowing netmos_parallel_init to change not only the number of parallel ports (0 or 1), but making it also change the BAR index of the parallel port when the serial ports are before the parallel port.
PS: the netmos_9855_2p entry in (struct pciserial_board) pci_parport_serial_boards[] is needed because netmos_parallel_init has no clean way to replace FL_BASE2 by FL_BASE4 in the description of the serial ports in function of the number of parallel ports on the card.
Tested with 9845 1P4S, 9855 1P4S and 9855 2P2S boards.
--- drivers/parport/parport_serial.c | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-)
drivers/parport/parport_serial.c +25 -5
@@ -30,6 +30,7 @@ enum parport_pc_pci_cards { titan_210l, netmos_9xx5_combo, netmos_9855, + netmos_9855_2p, avlab_1s1p, avlab_1s2p, avlab_2s1p,
@@ -62,7 +63,7 @@ struct parport_pc_pci { struct parport_pc_pci *card, int failed); }; -static int __devinit netmos_parallel_init (struct pci_dev *dev,struct parport_pc_pci *card,int autoirq,int autodma) +static int __devinit netmos_parallel_init (struct pci_dev *dev,struct parport_pc_pci *par,int autoirq,int autodma) {/* the rule described below doesn't hold for this device */ if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
@@ -74,9 +75,17 @@ static int __devinit netmos_parallel_ini* and serial ports. The form is 0x00PS, where <P> is the number of * parallel ports and <S> is the number of serial ports. */ - card->numports = (dev->subsystem_device &0xf0 ) >>4 ; -if (card->numports >ARRAY_SIZE (card->addr)) - card->numports =ARRAY_SIZE (card->addr); + par->numports = (dev->subsystem_device &0xf0 ) >>4 ; +if (par->numports >ARRAY_SIZE (par->addr)) + par->numports =ARRAY_SIZE (par->addr); +/* +* This function is currently only called for cards with up to +* one parallel port. +* Parallel port BAR is either before or after serial ports BARS; +* hence, lo should be either 0 or equal to the number of serial ports. +*/ +if (par->addr[0 ].lo !=0 ) + par->addr[0 ].lo = dev->subsystem_device &0xf ;return 0 ; }
@@ -84,7 +93,8 @@ static struct parport_pc_pci cards[] __d /* titan_110l */ { 1, { { 3, -1 }, } }, /* titan_210l */ { 1, { { 3, -1 }, } }, /* netmos_9xx5_combo */ { 1, { { 2, -1 }, }, netmos_parallel_init }, - /* netmos_9855 */ { 1, { { 2, -1 }, }, netmos_parallel_init }, + /* netmos_9855 */ { 1, { { 0, -1 }, }, netmos_parallel_init }, + /* netmos_9855_2p */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* avlab_1s1p */ { 1, { { 1, 2}, } }, /* avlab_1s2p */ { 2, { { 1, 2}, { 3, 4 },} }, /* avlab_2s1p */ { 1, { { 2, 3}, } },
@@ -110,6 +120,10 @@ static struct pci_device_id parport_seri {PCI_VENDOR_ID_NETMOS ,PCI_DEVICE_ID_NETMOS_9845 , PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855, + 0x1000, 0x0020, 0, 0, netmos_9855_2p }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855, + 0x1000, 0x0022, 0, 0, netmos_9855_2p }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855, PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/ { PCI_VENDOR_ID_AFAVLAB, 0x2110,
@@ -192,6 +206,12 @@ static struct pciserial_board pci_parpor .uart_offset = 8, }, [netmos_9855] = { + .flags = FL_BASE2 | FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [netmos_9855_2p] = { .flags = FL_BASE4 | FL_BASE_BARS, .num_ports = 1, .base_baud = 115200,
PATCH 2/35 8250: Fix oops from setserial
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alan Cox <[email protected]>
commit b8e7e40abeac49644fec4a4f52ffe74c7b05eca0 upstream.
If you setserial a port which has never been initialised we change the type but don't update the I/O method pointers. The same problem is true if you change the io type of a port - but nobody ever does that so nobody noticed!
Remember the old type and when attaching if the type has changed reload the port accessor pointers. We can't do it blindly as some 8250 drivers load custom accessors and we must not stomp those.
Closes-bug: #13367
--- drivers/serial/8250.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
drivers/serial/8250.c +15 -0
@@ -137,6 +137,7 @@ struct uart_8250_port {unsigned char mcr;unsigned char mcr_mask;/* mask of user bits */ unsigned char mcr_force;/* mask of forced bits */ +unsigned char cur_iotype;/* Running I/O type */ /* * Some bits in registers are cleared on a read, so they must
@@ -471,6 +472,7 @@ static void io_serial_out(struct uart_postatic void set_io_from_upio (struct uart_port *p) { +struct uart_8250_port *up = (struct uart_8250_port *)p;switch (p->iotype) {case UPIO_HUB6 : p->serial_in = hub6_serial_in;
@@ -509,6 +511,8 @@ static void set_io_from_upio(struct uart p->serial_out = io_serial_out;break ; } +/* Remember loaded iotype */ + up->cur_iotype = p->iotype; } static void
@@ -1937,6 +1941,9 @@ static int serial8250_startup(struct uar up->capabilities = uart_config[up->port.type].flags; up->mcr =0 ; +if (up->port.iotype != up->cur_iotype) +set_io_from_upio (port); +if (up->port.type ==PORT_16C950 ) {/* Wake up and initialize UART */ up->acr =0 ;
@@ -2563,6 +2570,9 @@ static void serial8250_config_port(strucif (ret <0 ) probeflags &= ~PROBE_RSA ; +if (up->port.iotype != up->cur_iotype) +set_io_from_upio (port); +if (flags &UART_CONFIG_TYPE )autoconfig (up, probeflags);if (up->port.type !=PORT_UNKNOWN && flags &UART_CONFIG_IRQ )
@@ -2671,6 +2681,11 @@ serial8250_register_ports(struct uart_dr {int i; +for (i =0 ; i < nr_uarts; i++) { +struct uart_8250_port *up = &serial8250_ports[i]; + up->cur_iotype =0xFF ; + } +serial8250_isa_init_ports ();for (i =0 ; i < nr_uarts; i++) {
PATCH 3/35 char: mxser, fix ISA board lookup
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Peter Botha <[email protected]>
commit 96050dfb25966612008dcea7d342e91fa01e993c upstream.
There's a bug in the mxser kernel module that still appears in the 2.6.29.4 kernel.
mxser_get_ISA_conf takes a ioaddress as its first argument, by passing the not of the ioaddr, you're effectively passing 0 which means it won't be able to talk to an ISA card. I have tested this, and removing the ! fixes the problem.
--- drivers/char/mxser.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/char/mxser.c +1 -1
@@ -2712,7 +2712,7 @@ static int __init mxser_module_init(voidcontinue ; brd = &mxser_boards[m]; - retval =mxser_get_ISA_conf (!ioaddr[b], brd); + retval =mxser_get_ISA_conf (ioaddr[b], brd);if (retval <=0 ) { brd->info =NULL ;continue ;
PATCH 5/35 r8169: fix crash when large packets are received
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Eric Dumazet <[email protected]>
commit fdd7b4c3302c93f6833e338903ea77245eb510b4 upstream.
Michael Tokarev reported receiving a large packet could crash a machine with RTL8169 NIC.
( original thread at http://lkml.org/lkml/2009/6/8/192 )
Problem is this driver tells that NIC frames up to 16383 bytes can be received but provides skb to rx ring allocated with smaller sizes (1536 bytes in case standard 1500 bytes MTU is used)
When a frame larger than what was allocated by driver is received, dma transfert can occurs past the end of buffer and corrupt kernel memory.
Fix is to tell to NIC what is the maximum size a frame can be.
This bug is very old, (before git introduction, linux-2.6.10), and should be backported to stable versions.
--- drivers/net/r8169.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/net/r8169.c +5 -6
@@ -66,7 +66,6 @@ static const int multicast_filter_limit#define RX_DMA_BURST 6/* Maximum PCI burst, '6' is 1024 */ #define TX_DMA_BURST 6/* Maximum PCI burst, '6' is 1024 */ #define EarlyTxThld 0x3F/* 0x3F means NO early transmit */ -#define RxPacketMaxSize 0x3FE8/* 16K - 1 - ETH_HLEN - VLAN - CRC... */ #define SafeMtu 0x1c20/* ... actually life sucks beyond ~7k */ #define InterFrameGap 0x03/* 3 means InterFrameGap = the shortest one */
@@ -2357,10 +2356,10 @@ static u16 rtl_rw_cpluscmd(void __iomemreturn cmd; } -static void rtl_set_rx_max_size (void __iomem *ioaddr) +static void rtl_set_rx_max_size (void __iomem *ioaddr,unsigned int rx_buf_sz) {/* Low hurts. Let's disable the filtering. */ -RTL_W16 (RxMaxSize,16383 ); +RTL_W16 (RxMaxSize, rx_buf_sz); }static void rtl8169_set_magic_reg (void __iomem *ioaddr,unsigned mac_version)
@@ -2407,7 +2406,7 @@ static void rtl_hw_start_8169(struct netRTL_W8 (EarlyTxThres, EarlyTxThld); -rtl_set_rx_max_size (ioaddr); +rtl_set_rx_max_size (ioaddr, tp->rx_buf_sz); if ((tp->mac_version == RTL_GIGA_MAC_VER_01) || (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
@@ -2668,7 +2667,7 @@ static void rtl_hw_start_8168(struct netRTL_W8 (EarlyTxThres, EarlyTxThld); -rtl_set_rx_max_size (ioaddr); +rtl_set_rx_max_size (ioaddr, tp->rx_buf_sz); tp->cp_cmd |=RTL_R16 (CPlusCmd) | PktCntrDisable |INTT_1 ;
@@ -2846,7 +2845,7 @@ static void rtl_hw_start_8101(struct netRTL_W8 (EarlyTxThres, EarlyTxThld); -rtl_set_rx_max_size (ioaddr); +rtl_set_rx_max_size (ioaddr, tp->rx_buf_sz); tp->cp_cmd |=rtl_rw_cpluscmd (ioaddr) | PCIMulRW;
PATCH 6/35 fs: remove incorrect I_NEW warnings
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Nick Piggin <[email protected]>
commit 545b9fd3d737afc0bb5203b1e79194a471605acd upstream.
Some filesystems can call in to sync an inode that is still in the I_NEW state (eg. ext family, when mounted with -osync). This is OK because the filesystem has sole access to the new inode, so it can modify i_state without races (because no other thread should be modifying it, by definition of I_NEW). Ie. a false positive, so remove the warnings.
The races are described here 7ef0d7377cb287e08f3ae94cebc919448e1f5dff, which is also where the warnings were introduced.
--- fs/fs-writeback.c | 2 -- 1 file changed, 2 deletions(-)
fs/fs-writeback.c +0 -2
@@ -274,7 +274,6 @@ __sync_single_inode(struct inode *inode,int ret;BUG_ON (inode->i_state &I_SYNC ); -WARN_ON (inode->i_state &I_NEW );/* Set I_SYNC, reset I_DIRTY */ dirty = inode->i_state &I_DIRTY ;
@@ -299,7 +298,6 @@ __sync_single_inode(struct inode *inode, }spin_lock (&inode_lock); -WARN_ON (inode->i_state &I_NEW ); inode->i_state &= ~I_SYNC ;if (!(inode->i_state &I_FREEING )) { if (!(inode->i_state & I_DIRTY) &&
PATCH 7/35 firmware_map: fix hang with x86/32bit
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Yinghai Lu <[email protected]>
commit 3b0fde0fac19c180317eb0601b3504083f4b9bf5 upstream.
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13484
Peer reported:
| The bug is introduced from kernel 2.6.27, if E820 table reserve the memory | above 4G in 32bit OS(BIOS-e820: 00000000fff80000 - 0000000120000000 | (reserved)), system will report Int 6 error and hang up. The bug is caused by | the following code in drivers/firmware/memmap.c, the resource_size_t is 32bit | variable in 32bit OS, the BUG_ON() will be invoked to result in the Int 6 | error. I try the latest 32bit Ubuntu and Fedora distributions, all hit this | bug. |====== |static int firmware_map_add_entry(resource_size_t start, resource_size_t end, | const char *type, | struct firmware_map_entry *entry)
and it only happen with CONFIG_PHYS_ADDR_T_64BIT is not set.
it turns out we need to pass u64 instead of resource_size_t for that.
--- drivers/firmware/memmap.c | 16 +++++++++------- include/linux/firmware-map.h | 12 ++++-------- 2 files changed, 13 insertions(+), 15 deletions(-)
drivers/firmware/memmap.c +9 -7
@@ -31,8 +31,12 @@* information is necessary as for the resource tree. */ struct firmware_map_entry { -resource_size_t start;/* start of the memory range */ -resource_size_t end;/* end of the memory range (incl.) */ +/* +* start and end must be u64 rather than resource_size_t, because e820 +* resources can lie at addresses above 4G. +*/ +u64 start;/* start of the memory range */ +u64 end;/* end of the memory range (incl.) */ const char *type;/* type of the memory range */ struct list_head list;/* entry for the linked list */ struct kobject kobj;/* kobject for each entry */
@@ -101,7 +105,7 @@ static LIST_HEAD(map_entries);* Common implementation of firmware_map_add() and firmware_map_add_early() * which expects a pre-allocated struct firmware_map_entry. **/ -static int firmware_map_add_entry (resource_size_t start,resource_size_t end, +static int firmware_map_add_entry (u64 start,u64 end,const char *type,struct firmware_map_entry *entry) {
@@ -132,8 +136,7 @@ static int firmware_map_add_entry(resour* * Returns 0 on success, or -ENOMEM if no memory could be allocated. **/ -int firmware_map_add (resource_size_t start,resource_size_t end, -const char *type) +int firmware_map_add (u64 start,u64 end,const char *type) {struct firmware_map_entry *entry;
@@ -157,8 +160,7 @@ int firmware_map_add(resource_size_t sta* * Returns 0 on success, or -ENOMEM if no memory could be allocated. **/ -int __init firmware_map_add_early (resource_size_t start,resource_size_t end, -const char *type) +int __init firmware_map_add_early (u64 start,u64 end,const char *type) {struct firmware_map_entry *entry;
include/linux/firmware-map.h +4 -8
@@ -24,21 +24,17 @@*/ #ifdef CONFIG_FIRMWARE_MEMMAP -int firmware_map_add (resource_size_t start,resource_size_t end, -const char *type); -int firmware_map_add_early (resource_size_t start,resource_size_t end, -const char *type); +int firmware_map_add (u64 start,u64 end,const char *type); +int firmware_map_add_early (u64 start,u64 end,const char *type);#else /* CONFIG_FIRMWARE_MEMMAP */ -static inline int firmware_map_add (resource_size_t start,resource_size_t end, -const char *type) +static inline int firmware_map_add (u64 start,u64 end,const char *type) {return 0 ; } -static inline int firmware_map_add_early (resource_size_t start, -resource_size_t end,const char *type) +static inline int firmware_map_add_early (u64 start,u64 end,const char *type) {return 0 ; }
PATCH 8/35 PCI: disable ASPM on VIA root-port-under-bridge configurations
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Shaohua Li <[email protected]>
commit 8e822df700694ca6850d1e0c122fd7004b2778d8 upstream.
VIA has a strange chipset, it has root port under a bridge. Disable ASPM for such strange chipset.
drivers/pci/pcie/aspm.c +4 -0
@@ -638,6 +638,10 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)if (pdev->pcie_type !=PCI_EXP_TYPE_ROOT_PORT && pdev->pcie_type !=PCI_EXP_TYPE_DOWNSTREAM )return ; +/* VIA has a strange chipset, root port is under a bridge */ +if (pdev->pcie_type ==PCI_EXP_TYPE_ROOT_PORT && + pdev->bus->self) +return ;down_read (&pci_bus_sem);if (list_empty (&pdev->subordinate->devices)) goto out;
PATCH 9/35 atkbd: add forced release quirks for four more keyboard models
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Chuck Ebbert <[email protected]>
Add atkbd forced key release quirks for four more notebook models.
Rollup of:
linux-2.6.git-391916985b009b8934d00f772a3bde0d8a495ebd.patch linux-2.6.git-adcb523eb39e0dd2f712d8dbd8e18b5d36a97825.patch linux-2.6.git-157f3a3e17cd498571db2a472dc3a15a7679ee3f.patch linux-2.6.git-e04126c79242d2740b469292d42c239bad7807cc.patch linux-2.6.git-9166d0f620d5dd4a128711bdeedb3e0f534d9d49.patch
--- drivers/input/keyboard/atkbd.c | 169 +++++++++++++++++++++++------------------ 1 file changed, 96 insertions(+), 73 deletions(-)
drivers/input/keyboard/atkbd.c +96 -73
@@ -229,7 +229,8 @@ struct atkbd {/* * System-specific ketymap fixup routine */ -static void (*atkbd_platform_fixup)(struct atkbd *); +static void (*atkbd_platform_fixup)(struct atkbd *,const void *data); +static void *atkbd_platform_fixup_data;static ssize_t atkbd_attr_show_helper (struct device *dev,char *buf,ssize_t (*handler)(struct atkbd *,char *));
@@ -834,87 +835,71 @@ static void atkbd_disconnect(struct seri }/* -* Most special keys (Fn+F?) on Dell laptops do not generate release -* events so we have to do it ourselves. +* generate release events for the keycodes given in data */ -static void atkbd_dell_laptop_keymap_fixup (struct atkbd *atkbd) +static void atkbd_apply_forced_release_keylist (struct atkbd * atkbd, +const void *data) { -static const unsigned int forced_release_keys[] = { -0x85 ,0x86 ,0x87 ,0x88 ,0x89 ,0x8a ,0x8b ,0x8f ,0x93 , - }; -int i; +const unsigned int *keys = data; +unsigned int i;if (atkbd->set ==2 ) -for (i =0 ; i <ARRAY_SIZE (forced_release_keys); i++) -__set_bit (forced_release_keys[i], - atkbd->force_release_mask); +for (i =0 ; keys[i] !=-1U ; i++) +__set_bit (keys[i], atkbd->force_release_mask); }/* +* Most special keys (Fn+F?) on Dell laptops do not generate release +* events so we have to do it ourselves. +*/ +static unsigned int atkbd_dell_laptop_forced_release_keys[] = { +0x85 ,0x86 ,0x87 ,0x88 ,0x89 ,0x8a ,0x8b ,0x8f ,0x93 ,-1U +}; + +/* * Perform fixup for HP system that doesn't generate release * for its video switch */ -static void atkbd_hp_keymap_fixup (struct atkbd *atkbd) -{ -static const unsigned int forced_release_keys[] = { -0x94 , - }; -int i; - -if (atkbd->set ==2 ) -for (i =0 ; i <ARRAY_SIZE (forced_release_keys); i++) -__set_bit (forced_release_keys[i], - atkbd->force_release_mask); -} +static unsigned int atkbd_hp_forced_release_keys[] = { +0x94 ,-1U +};/* * Inventec system with broken key release on volume keys */ -static void atkbd_inventec_keymap_fixup (struct atkbd *atkbd) -{ -const unsigned int forced_release_keys[] = { -0xae ,0xb0 , - }; -int i; - -if (atkbd->set ==2 ) -for (i =0 ; i <ARRAY_SIZE (forced_release_keys); i++) -__set_bit (forced_release_keys[i], - atkbd->force_release_mask); -} +static unsigned int atkbd_inventec_forced_release_keys[] = { +0xae ,0xb0 ,-1U +};/* * Perform fixup for HP Pavilion ZV6100 laptop that doesn't generate release * for its volume buttons */ -static void atkbd_hp_zv6100_keymap_fixup (struct atkbd *atkbd) -{ -const unsigned int forced_release_keys[] = { -0xae ,0xb0 , - }; -int i; +static unsigned int atkbd_hp_zv6100_forced_release_keys[] = { +0xae ,0xb0 ,-1U +}; -if (atkbd->set ==2 ) -for (i =0 ; i <ARRAY_SIZE (forced_release_keys); i++) -__set_bit (forced_release_keys[i], - atkbd->force_release_mask); -} +/* +* Samsung NC10,NC20 with Fn+F? key release not working +*/ +static unsigned int atkbd_samsung_forced_release_keys[] = { +0x82 ,0x83 ,0x84 ,0x86 ,0x88 ,0x89 ,0xb3 ,0xf7 ,0xf9 ,-1U +};/* -* Samsung NC10 with Fn+F? key release not working +* The volume up and volume down special keys on a Fujitsu Amilo PA 1510 laptop +* do not generate release events so we have to do it ourselves. */ -static void atkbd_samsung_keymap_fixup (struct atkbd *atkbd) -{ -const unsigned int forced_release_keys[] = { -0x82 ,0x83 ,0x84 ,0x86 ,0x88 ,0x89 ,0xb3 ,0xf7 ,0xf9 , - }; -int i; +static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = { +0xb0 ,0xae ,-1U +}; -if (atkbd->set ==2 ) -for (i =0 ; i <ARRAY_SIZE (forced_release_keys); i++) -__set_bit (forced_release_keys[i], - atkbd->force_release_mask); -} +/* +* Amilo Xi 3650 key release for light touch bar not working +*/ +static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { +0x67 ,0xed ,0x90 ,0xa2 ,0x99 ,0xa4 ,0xae ,0xb0 ,-1U +};/* * atkbd_set_keycode_table() initializes keyboard's keycode table
@@ -967,7 +952,7 @@ static void atkbd_set_keycode_table(stru* Perform additional fixups */ if (atkbd_platform_fixup) -atkbd_platform_fixup (atkbd); +atkbd_platform_fixup (atkbd, atkbd_platform_fixup_data); }/*
@@ -1492,9 +1477,11 @@ static ssize_t atkbd_show_err_count(strureturn sprintf (buf,"%lu\n" , atkbd->err_count); } -static int __init atkbd_setup_fixup (const struct dmi_system_id *id) +static int __init atkbd_setup_forced_release (const struct dmi_system_id *id) { - atkbd_platform_fixup = id->driver_data; + atkbd_platform_fixup = atkbd_apply_forced_release_keylist; + atkbd_platform_fixup_data = id->driver_data; +return 0 ; }
@@ -1505,8 +1492,8 @@ static struct dmi_system_id atkbd_dmi_quDMI_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ),DMI_MATCH (DMI_CHASSIS_TYPE ,"8" ),/* Portable */ }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_dell_laptop_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_dell_laptop_forced_release_keys, }, { .ident = "Dell Laptop",
@@ -1514,8 +1501,8 @@ static struct dmi_system_id atkbd_dmi_quDMI_MATCH (DMI_SYS_VENDOR ,"Dell Computer Corporation" ),DMI_MATCH (DMI_CHASSIS_TYPE ,"8" ),/* Portable */ }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_dell_laptop_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_dell_laptop_forced_release_keys, }, { .ident = "HP 2133",
@@ -1523,8 +1510,8 @@ static struct dmi_system_id atkbd_dmi_quDMI_MATCH (DMI_SYS_VENDOR ,"Hewlett-Packard" ), DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"), }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_hp_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_hp_forced_release_keys, }, { .ident = "HP Pavilion ZV6100",
@@ -1532,8 +1519,8 @@ static struct dmi_system_id atkbd_dmi_quDMI_MATCH (DMI_SYS_VENDOR ,"Hewlett-Packard" ), DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"), }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_hp_zv6100_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_hp_zv6100_forced_release_keys, }, { .ident = "Inventec Symphony",
@@ -1541,8 +1528,8 @@ static struct dmi_system_id atkbd_dmi_quDMI_MATCH (DMI_SYS_VENDOR ,"INVENTEC" ), DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_inventec_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_inventec_forced_release_keys, }, { .ident = "Samsung NC10",
@@ -1550,8 +1537,44 @@ static struct dmi_system_id atkbd_dmi_qu DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "NC10"), }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_samsung_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { + .ident = "Samsung NC20", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "NC20"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { + .ident = "Samsung SQ45S70S", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { + .ident = "Fujitsu Amilo PA 1510", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_amilo_pa1510_forced_release_keys, + }, + { + .ident = "Fujitsu Amilo Xi 3650", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_amilo_xi3650_forced_release_keys, }, { } };
PATCH 10/35 atmel_lcdfb: correct fifo size for some products
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Nicolas Ferre <[email protected]>
commit 53b7479bbdaedcc7846c66fd608fe66f1b5aa35b upstream.
Remove wrong fifo size definition for some AT91 products.
Due to a misunderstanding of some AT91 datasheets, a fifo size of 2048 (words) has been introduced by mistake. In fact, all products (AT91/AT32) are sharing the same fifo size of 512 words.
--- drivers/video/atmel_lcdfb.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-)
drivers/video/atmel_lcdfb.c +2 -8
@@ -29,14 +29,8 @@/* configurable parameters */ #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 -#define ATMEL_LCDC_DMA_BURST_LEN 8 - -#if defined(CONFIG_ARCH_AT91SAM9263 ) || defined(CONFIG_ARCH_AT91CAP9 ) || \ - defined(CONFIG_ARCH_AT91SAM9RL ) -#define ATMEL_LCDC_FIFO_SIZE 2048 -#else -#define ATMEL_LCDC_FIFO_SIZE 512 -#endif +#define ATMEL_LCDC_DMA_BURST_LEN 8/* words */ +#define ATMEL_LCDC_FIFO_SIZE 512/* words */ #if defined(CONFIG_ARCH_AT91 )#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
PATCH 11/35 bonding: fix multiple module load problem
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Stephen Hemminger <[email protected]>
[ Upstream commit 130aa61a77b8518f1ea618e1b7d214d60b405f10 ]
Some users still load bond module multiple times to create bonding devices. This accidentally was broken by a later patch about the time sysfs was fixed. According to Jay, it was broken by:
commit b8a9787eddb0e4665f31dd1d64584732b2b5d051
Author: Jay Vosburgh <[email protected]>
Date: Fri Jun 13 18:12:04 2008 -0700
bonding: Allow setting max_bonds to zero
Note: sysfs and procfs still produce WARN() messages when this is done so the sysfs method is the recommended API.
--- drivers/net/bonding/bond_sysfs.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/bonding/bond_sysfs.c +1 -0
@@ -1538,6 +1538,7 @@ int bond_create_sysfs(void)printk (KERN_ERR "network device named %s already exists in sysfs" , class_attr_bonding_masters.attr.name); + ret =0 ; }return ret;
PATCH 12/35 char: moxa, prevent opening unavailable ports
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Dirk Eibach <[email protected]>
commit a90b037583d5f1ae3e54e9c687c79df82d1d34a4 upstream.
In moxa.c there are 32 minor numbers reserved for each device. The number of ports actually available per device is stored in moxa_board_conf->numPorts. This number is not considered in moxa_open(). Opening a port that is not available results in a kernel oops. This patch adds a test to moxa_open() that prevents opening unavailable ports.
--- drivers/char/moxa.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/char/moxa.c +6 -1
@@ -1184,6 +1184,11 @@ static int moxa_open(struct tty_struct *return -ENODEV ; } +if (port %MAX_PORTS_PER_BOARD >= brd->numPorts) { + retval = -ENODEV ; + goto out_unlock; + } + ch = &brd->ports[port %MAX_PORTS_PER_BOARD ]; ch->port.count++; tty->driver_data = ch;
@@ -1208,8 +1213,8 @@ static int moxa_open(struct tty_struct *moxa_close_port (tty); }else ch->port.flags |=ASYNC_NORMAL_ACTIVE ; +out_unlock:mutex_unlock (&moxa_openlock); -return retval; }
PATCH 13/35 ISDN: Fix DMA alloc for hfcpci
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Karsten Keil <[email protected]>
commit 8a745b9d91962991ce87a649a4dc3af3206c2c8b upstream.
Replace wrong code with correct DMA API functions.
--- drivers/isdn/hisax/hfc_pci.c | 41 ++++++++++++++++++++++++++++++----------- drivers/isdn/hisax/hisax.h | 2 +- 2 files changed, 31 insertions(+), 12 deletions(-)
drivers/isdn/hisax/hfc_pci.c +30 -11
@@ -82,8 +82,9 @@ release_io_hfcpci(struct IsdnCardState *Write_hfc (cs,HFCPCI_INT_M2 , cs->hw.hfcpci.int_m2);pci_write_config_word (cs->hw.hfcpci.dev,PCI_COMMAND ,0 );/* disable memory mapped ports + busmaster */ del_timer (&cs->hw.hfcpci.timer); -kfree (cs->hw.hfcpci.share_start); - cs->hw.hfcpci.share_start =NULL ; +pci_free_consistent (cs->hw.hfcpci.dev,0x8000 , + cs->hw.hfcpci.fifos, cs->hw.hfcpci.dma); + cs->hw.hfcpci.fifos =NULL ;iounmap ((void *)cs->hw.hfcpci.pci_io); }
@@ -1663,8 +1664,19 @@ setup_hfcpci(struct IsdnCard *card) dev_hfcpci); i++;if (tmp_hfcpci) { +dma_addr_t dma_mask =DMA_BIT_MASK (32 ) & ~0x7fffUL ;if (pci_enable_device (tmp_hfcpci))continue ; +if (pci_set_dma_mask (tmp_hfcpci, dma_mask)) { +printk (KERN_WARNING +"HiSax hfc_pci: No suitable DMA available.\n" ); +continue ; + } +if (pci_set_consistent_dma_mask (tmp_hfcpci, dma_mask)) { +printk (KERN_WARNING +"HiSax hfc_pci: No suitable consistent DMA available.\n" ); +continue ; + }pci_set_master (tmp_hfcpci);if ((card->para[0 ]) && (card->para[0 ] != (tmp_hfcpci->resource[0 ].start &PCI_BASE_ADDRESS_IO_MASK )))continue ;
@@ -1693,22 +1705,29 @@ setup_hfcpci(struct IsdnCard *card)printk (KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n" );return (0 ); } +/* Allocate memory for FIFOS */ -/* Because the HFC-PCI needs a 32K physical alignment, we */ -/* need to allocate the double mem and align the address */ -if (!(cs->hw.hfcpci.share_start =kmalloc (65536 ,GFP_KERNEL ))) { -printk (KERN_WARNING "HFC-PCI: Error allocating memory for FIFO!\n" ); + cs->hw.hfcpci.fifos =pci_alloc_consistent (cs->hw.hfcpci.dev, +0x8000 , &cs->hw.hfcpci.dma); +if (!cs->hw.hfcpci.fifos) { +printk (KERN_WARNING "HFC-PCI: Error allocating FIFO memory!\n" ); +return 0 ; + } +if (cs->hw.hfcpci.dma &0x7fff ) { +printk (KERN_WARNING +"HFC-PCI: Error DMA memory not on 32K boundary (%lx)\n" , + (u_long )cs->hw.hfcpci.dma); +pci_free_consistent (cs->hw.hfcpci.dev,0x8000 , + cs->hw.hfcpci.fifos, cs->hw.hfcpci.dma);return 0 ; } - cs->hw.hfcpci.fifos = (void *) - (((ulong ) cs->hw.hfcpci.share_start) & ~0x7FFF ) +0x8000 ; -pci_write_config_dword (cs->hw.hfcpci.dev,0x80 , (u_int )virt_to_bus (cs->hw.hfcpci.fifos)); +pci_write_config_dword (cs->hw.hfcpci.dev,0x80 , (u32 )cs->hw.hfcpci.dma); cs->hw.hfcpci.pci_io =ioremap ((ulong ) cs->hw.hfcpci.pci_io,256 );printk (KERN_INFO -"HFC-PCI: defined at mem %p fifo %p(%#x) IRQ %d HZ %d\n" , +"HFC-PCI: defined at mem %p fifo %p(%lx) IRQ %d HZ %d\n" , cs->hw.hfcpci.pci_io, cs->hw.hfcpci.fifos, - (u_int )virt_to_bus (cs->hw.hfcpci.fifos), + (u_long )cs->hw.hfcpci.dma, cs->irq,HZ );spin_lock_irqsave (&cs->lock, flags);
drivers/isdn/hisax/hisax.h +1 -1
@@ -694,7 +694,7 @@ struct hfcPCI_hw {int nt_timer;struct pci_dev *dev;unsigned char *pci_io;/* start of PCI IO memory */ -void *share_start;/* shared memory for Fifos start */ +dma_addr_t dma;/* dma handle for Fifos */ void *fifos;/* FIFO memory */ int last_bfifo_cnt[2 ];/* marker saving last b-fifo frame count */ struct timer_list timer;
PATCH 14/35 USB: usbtmc: fix switch statment
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Greg Kroah-Hartman <[email protected]>
commit a92b63e7e4c185b4dd9e87762e2cb716e54482d0 upstream.
Steve Holland pointed out that we forgot to call break; in the switch statment. This probably resolves a lot of the bug reports I've gotten for the driver lately.
Stupid me...
--- drivers/usb/class/usbtmc.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/usb/class/usbtmc.c +6 -0
@@ -927,21 +927,27 @@ static long usbtmc_ioctl(struct file *fiswitch (cmd) {case USBTMC_IOCTL_CLEAR_OUT_HALT : retval =usbtmc_ioctl_clear_out_halt (data); +break ;case USBTMC_IOCTL_CLEAR_IN_HALT : retval =usbtmc_ioctl_clear_in_halt (data); +break ;case USBTMC_IOCTL_INDICATOR_PULSE : retval =usbtmc_ioctl_indicator_pulse (data); +break ;case USBTMC_IOCTL_CLEAR : retval =usbtmc_ioctl_clear (data); +break ;case USBTMC_IOCTL_ABORT_BULK_OUT : retval =usbtmc_ioctl_abort_bulk_out (data); +break ;case USBTMC_IOCTL_ABORT_BULK_IN : retval =usbtmc_ioctl_abort_bulk_in (data); +break ; }mutex_unlock (&data->io_mutex);
PATCH 15/35 x86: Add quirk for reboot stalls on a Dell Optiplex 360
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jean Delvare <[email protected]>
commit 4a4aca641bc4598e77b866804f47c651ec4a764d upstream.
The Dell Optiplex 360 hangs on reboot, just like the Optiplex 330, so the same quirk is needed.
LKML-Reference: <[email protected]>
--- arch/x86/kernel/reboot.c | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/x86/kernel/reboot.c +9 -0
@@ -193,6 +193,15 @@ static struct dmi_system_id __initdata r DMI_MATCH(DMI_BOARD_NAME, "0KP561"), }, }, + { /* Handle problems with rebooting on Dell Optiplex 360 with 0T656F */ + .callback = set_bios_reboot, + .ident = "Dell OptiPlex 360", + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"OptiPlex 360" ), + DMI_MATCH(DMI_BOARD_NAME, "0T656F"), + }, + }, { /* Handle problems with rebooting on Dell 2400's */ .callback = set_bios_reboot, .ident = "Dell PowerEdge 2400",
PATCH 16/35 ALSA: ca0106 - Add missing registrations of vmaster controls
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takashi Iwai <[email protected]>
commit 601e1cc5df940b59e71c947726640811897d30df upstream.
Although the vmaster controls are created, they aren't registered thus they don't appear in the real world. Added the missing snd_ctl_add() calls.
--- sound/pci/ca0106/ca0106_mixer.c | 6 ++++++ 1 file changed, 6 insertions(+)
sound/pci/ca0106/ca0106_mixer.c +6 -0
@@ -841,6 +841,9 @@ int __devinit snd_ca0106_mixer(struct sn snd_ca0106_master_db_scale);if (!vmaster)return -ENOMEM ; + err =snd_ctl_add (card, vmaster); +if (err <0 ) +return err;add_slaves (card, vmaster, slave_vols);if (emu->details->spi_dac ==1 ) {
@@ -848,6 +851,9 @@ int __devinit snd_ca0106_mixer(struct sn NULL);if (!vmaster)return -ENOMEM ; + err =snd_ctl_add (card, vmaster); +if (err <0 ) +return err;add_slaves (card, vmaster, slave_sws); }return 0 ;
PATCH 17/35 floppy: provide a PNP device table in the module.
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Scott James Remnant <[email protected]>
commit 83f9ef463bcb4ba7b4fee1d6212fac7d277010d3 upstream.
The missing device table means that the floppy module is not auto-loaded, even when the appropriate PNP device (0700) is found.
We don't actually use the table in the module, since the device doesn't have a struct pnp_driver, but it's sufficient to cause an alias in the module that udev/modprobe will use.
--- drivers/block/floppy.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/block/floppy.c +8 -0
@@ -177,6 +177,7 @@ static int print_unex = 1;#include <linux/interrupt.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/mod_devicetable.h> #include <linux/buffer_head.h> /* for invalidate_buffers() */ #include <linux/mutex.h>
@@ -4598,6 +4599,13 @@ MODULE_AUTHOR("Alain L. Knaff");MODULE_SUPPORTED_DEVICE ("fd" );MODULE_LICENSE ("GPL" ); +/* This doesn't actually get used other than for module information */ +static const struct pnp_device_id floppy_pnpids[] = { + {"PNP0700" ,0 }, + { } +}; +MODULE_DEVICE_TABLE (pnp, floppy_pnpids); +#else __setup ("floppy=" , floppy_setup);
PATCH 18/35 IB/mlx4: Add strong ordering to local inval and fast reg work requests
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jack Morgenstein <[email protected]>
commit 2ac6bf4ddc87c3b6b609f8fa82f6ebbffeac12f4 upstream.
The ConnectX Programmer's Reference Manual states that the "SO" bit must be set when posting Fast Register and Local Invalidate send work requests. When this bit is set, the work request will be executed only after all previous work requests on the send queue have been executed. (If the bit is not set, Fast Register and Local Invalidate WQEs may begin execution too early, which violates the defined semantics for these operations)
This fixes the issue with NFS/RDMA reported in
<http://lists.openfabrics.org/pipermail/general/2009-April/059253.html>
--- drivers/infiniband/hw/mlx4/qp.c | 4 ++++ include/linux/mlx4/qp.h | 1 + 2 files changed, 5 insertions(+)
drivers/infiniband/hw/mlx4/qp.c +4 -0
@@ -1585,12 +1585,16 @@ int mlx4_ib_post_send(struct ib_qp *ibqpbreak ;case IB_WR_LOCAL_INV : + ctrl->srcrb_flags |= +cpu_to_be32 (MLX4_WQE_CTRL_STRONG_ORDER );set_local_inv_seg (wqe, wr->ex.invalidate_rkey); wqe +=sizeof (struct mlx4_wqe_local_inval_seg ); size +=sizeof (struct mlx4_wqe_local_inval_seg ) /16 ;break ;case IB_WR_FAST_REG_MR : + ctrl->srcrb_flags |= +cpu_to_be32 (MLX4_WQE_CTRL_STRONG_ORDER );set_fmr_seg (wqe, wr); wqe +=sizeof (struct mlx4_wqe_fmr_seg ); size +=sizeof (struct mlx4_wqe_fmr_seg ) /16 ;
include/linux/mlx4/qp.h +1 -0
@@ -165,6 +165,7 @@ enum {MLX4_WQE_CTRL_IP_CSUM =1 <<4 ,MLX4_WQE_CTRL_TCP_UDP_CSUM =1 <<5 ,MLX4_WQE_CTRL_INS_VLAN =1 <<6 , + MLX4_WQE_CTRL_STRONG_ORDER = 1 << 7, }; struct mlx4_wqe_ctrl_seg {
PATCH 19/35 x86: handle initrd that extends into unusable memory
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Yinghai Lu <[email protected]>
commit 8c5dd8f43367f4f266dd616f11658005bc2d20ef upstream.
On a system where system memory (according e820) is not covered by mtrr, mtrr_trim_memory converts a portion of memory to reserved, but bootloader has already put the initrd in that range.
Thus, we need to have 64bit to use relocate_initrd too.
[ Impact: fix using initrd when mtrr_trim_memory happen ]
--- arch/x86/kernel/setup.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-)
arch/x86/kernel/setup.c +3 -12
@@ -255,15 +255,13 @@ static inline void copy_edd(void)#ifdef CONFIG_BLK_DEV_INITRD -#ifdef CONFIG_X86_32 -#define MAX_MAP_CHUNK (NR_FIX_BTMAPS << PAGE_SHIFT)static void __init relocate_initrd (void ) {u64 ramdisk_image = boot_params.hdr.ramdisk_image;u64 ramdisk_size = boot_params.hdr.ramdisk_size; - u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT; +u64 end_of_lowmem = max_low_pfn_mapped <<PAGE_SHIFT ;u64 ramdisk_here;unsigned long slop, clen, mapaddr;char *p, *q;
@@ -319,14 +317,13 @@ static void __init relocate_initrd(void) ramdisk_image, ramdisk_image + ramdisk_size -1 , ramdisk_here, ramdisk_here + ramdisk_size - 1); } -#endif static void __init reserve_initrd (void ) {u64 ramdisk_image = boot_params.hdr.ramdisk_image;u64 ramdisk_size = boot_params.hdr.ramdisk_size;u64 ramdisk_end = ramdisk_image + ramdisk_size; -u64 end_of_lowmem = max_low_pfn <<PAGE_SHIFT ; +u64 end_of_lowmem = max_low_pfn_mapped <<PAGE_SHIFT ;if (!boot_params.hdr.type_of_loader || !ramdisk_image || !ramdisk_size)
@@ -356,14 +353,8 @@ static void __init reserve_initrd(void) return; } -#ifdef CONFIG_X86_32 relocate_initrd (); -#else -printk (KERN_ERR "initrd extends beyond end of memory " -"(0x%08llx > 0x%08llx)\ndisabling initrd\n" , - ramdisk_end, end_of_lowmem); - initrd_start =0 ; -#endif +free_early (ramdisk_image, ramdisk_end); }#else
PATCH 20/35 lockdep: Select frame pointers on x86
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Peter Zijlstra <[email protected]>
commit 00540e5d54be972a94a3b2ce6da8621bebe731a2 upstream.
x86 stack traces are a piece of crap without frame pointers, and its not like the 'performance gain' of not having stack pointers matters when you selected lockdep.
LKML-Reference: <new-submission>
--- lib/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
lib/Kconfig.debug +1 -1
@@ -402,7 +402,7 @@ config LOCKDEP bool depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT select STACKTRACE - select FRAME_POINTER if !X86 && !MIPS && !PPC + select FRAME_POINTER if !MIPS && !PPC select KALLSYMS select KALLSYMS_ALL
PATCH 21/35 mac80211: fix minstrel single-rate memory corruption
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Bob Copeland <[email protected]>
commit 5ee58d7e6ad019675b4090582aec4fa1180d8703 upstream.
The minstrel rate controller periodically looks up rate indexes in a sampling table. When accessing a specific row and column, minstrel correctly does a bounds check which, on the surface, appears to handle the case where mi->n_rates < 2. However, mi->sample_idx is actually defined as an unsigned, so the right hand side is taken to be a huge positive number when negative, and the check will always fail.
Consequently, the RC will overrun the array and cause random memory corruption when communicating with a peer that has only a single rate. The max value of mi->sample_idx is around 25 so casting to int should have no ill effects.
Without the change, uptime is a few minutes under load with an AP that has a single hard-coded rate, and both the AP and STA could potentially crash. With the change, both lasted 12 hours with a steady load.
Thanks to Ognjen Maric for providing the single-rate clue so I could reproduce this.
This fixes http://bugzilla.kernel.org/show_bug.cgi?id=12490 on the regression list (also http://bugzilla.kernel.org/show_bug.cgi?id=13000).
--- net/mac80211/rc80211_minstrel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/mac80211/rc80211_minstrel.c +1 -1
@@ -216,7 +216,7 @@ minstrel_get_next_sample(struct minstrelunsigned int sample_ndx; sample_ndx =SAMPLE_TBL (mi, mi->sample_idx, mi->sample_column); mi->sample_idx++; -if (mi->sample_idx > (mi->n_rates -2 )) { +if ((int ) mi->sample_idx > (mi->n_rates -2 )) { mi->sample_idx =0 ; mi->sample_column++;if (mi->sample_column >=SAMPLE_COLUMNS )
PATCH 22/35 md/raid5: add missing call to schedule() after prepare_to_wait()
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Dan Williams <[email protected]>
commit 7a3ab908948b6296ee7e81d42f7c176361c51975 upstream.
In the unlikely event that reshape progresses past the current request while it is waiting for a stripe we need to schedule() before retrying for 2 reasons:
1/ Prevent list corruption from duplicated list_add() calls without
intervening list_del().
2/ Give the reshape code a chance to make some progress to resolve the
conflict.
--- drivers/md/raid5.c | 1 + 1 file changed, 1 insertion(+)
drivers/md/raid5.c +1 -0
@@ -3465,6 +3465,7 @@ static int make_request(struct request_qspin_unlock_irq (&conf->device_lock);if (must_retry) {release_stripe (sh); +schedule (); goto retry; } }
PATCH 23/35 vt_ioctl: fix lock imbalance
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jiri Slaby <[email protected]>
commit a115902f67ef51fbbe83e214fb761aaa9734c1ce upstream.
Don't return from switch/case directly in vt_ioctl. Set ret and break instead so that we unlock BKL.
--- drivers/char/vt_ioctl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/char/vt_ioctl.c +2 -1
@@ -396,7 +396,8 @@ int vt_ioctl(struct tty_struct *tty, str kbd = kbd_table + console;switch (cmd) {case TIOCLINUX : -return tioclinux (tty, arg); + ret =tioclinux (tty, arg); +break ;case KIOCSOUND :if (!perm) goto eperm;
PATCH 24/35 x86: Set cpu_llc_id on AMD CPUs
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Andreas Herrmann <[email protected]>
commit 99bd0c0fc4b04da54cb311953ef9489931c19c63 upstream.
This counts when building sched domains in case NUMA information is not available.
( See cpu_coregroup_mask() which uses llc_shared_map which in turn is
created based on cpu_llc_id. )
Currently Linux builds domains as follows:
(example from a dual socket quad-core system)
CPU0 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 0 1 2 3 4 5 6 7
...
CPU7 attaching sched-domain:
domain 0: span 0-7 level CPU
groups: 7 0 1 2 3 4 5 6
Ever since that is borked for multi-core AMD CPU systems. This patch fixes that and now we get a proper:
CPU0 attaching sched-domain:
domain 0: span 0-3 level MC
groups: 0 1 2 3
domain 1: span 0-7 level CPU
groups: 0-3 4-7
...
CPU7 attaching sched-domain:
domain 0: span 4-7 level MC
groups: 7 4 5 6
domain 1: span 0-7 level CPU
groups: 4-7 0-3
This allows scheduler to assign tasks to cores on different sockets (i.e. that don't share last level cache) for performance reasons.
LKML-Reference: <[email protected]>
--- arch/x86/kernel/cpu/amd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/x86/kernel/cpu/amd.c +3 -1
@@ -207,13 +207,15 @@ static void __cpuinit amd_detect_cmp(str {#ifdef CONFIG_X86_HT unsigned bits; +int cpu =smp_processor_id (); bits = c->x86_coreid_bits; -/* Low order bits define the core id (index of core in socket) */ c->cpu_core_id = c->initial_apicid & ((1 << bits)-1 );/* Convert the initial APIC ID into the socket ID */ c->phys_proc_id = c->initial_apicid >> bits; +/* use socket ID also for last level cache */ +per_cpu (cpu_llc_id, cpu) = c->phys_proc_id;#endif }
PATCH 25/35 parport_pc: after superio probing restore original register values
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jens Rottmann <[email protected]>
commit e2434dc1c19412639dd047a4d4eff8ed0e5d0d50 upstream.
CONFIG_PARPORT_PC_SUPERIO probes for various superio chips by writing byte sequences to a set of different potential I/O ranges. But the probed ranges are not exclusive to parallel ports. Some of our boards just happen to have a watchdog in one of them. Took us almost a week to figure out why some distros reboot without warning after running flawlessly for 3 hours. For exactly 170 = 0xAA minutes, that is ...
Fixed by restoring original values after probing. Also fixed too small request_region() in detect_and_report_it87().
--- drivers/parport/parport_pc.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-)
drivers/parport/parport_pc.c +25 -6
@@ -1413,11 +1413,13 @@ static void __devinit decode_smsc(int efstatic void __devinit winbond_check (int io,int key) { -int devid,devrev,oldid,x_devid,x_devrev,x_oldid; +int origval, devid, devrev, oldid, x_devid, x_devrev, x_oldid;if (!request_region (io,3 , __func__))return ; + origval =inb (io);/* Save original value */ +/* First probe without key */ outb (0x20 ,io); x_devid=inb (io+1 );
@@ -1437,6 +1439,8 @@ static void __devinit winbond_check(int oldid=inb (io+1 );outb (0xaa ,io);/* Magic Seal */ +outb (origval, io);/* in case we poked some entirely different hardware */ +if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid)) goto out;/* protection against false positives */
@@ -1447,11 +1451,15 @@ out:static void __devinit winbond_check2 (int io,int key) { -int devid,devrev,oldid,x_devid,x_devrev,x_oldid; +int origval[3 ], devid, devrev, oldid, x_devid, x_devrev, x_oldid;if (!request_region (io,3 , __func__))return ; + origval[0 ] =inb (io);/* Save original values */ + origval[1 ] =inb (io +1 ); + origval[2 ] =inb (io +2 ); +/* First probe without the key */ outb (0x20 ,io+2 ); x_devid=inb (io+2 );
@@ -1470,6 +1478,10 @@ static void __devinit winbond_check2(int oldid=inb (io+2 );outb (0xaa ,io);/* Magic Seal */ +outb (origval[0 ], io);/* in case we poked some entirely different hardware */ +outb (origval[1 ], io +1 ); +outb (origval[2 ], io +2 ); +if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid)) goto out;/* protection against false positives */
@@ -1480,11 +1492,13 @@ out:static void __devinit smsc_check (int io,int key) { -int id,rev,oldid,oldrev,x_id,x_rev,x_oldid,x_oldrev; +int origval, id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;if (!request_region (io,3 , __func__))return ; + origval =inb (io);/* Save original value */ +/* First probe without the key */ outb (0x0d ,io); x_oldid=inb (io+1 );
@@ -1508,6 +1522,8 @@ static void __devinit smsc_check(int io, rev=inb (io+1 );outb (0xaa ,io);/* Magic Seal */ +outb (origval, io);/* in case we poked some entirely different hardware */ +if ((x_id == id) && (x_oldrev == oldrev) && (x_oldid == oldid) && (x_rev == rev)) goto out;/* protection against false positives */
@@ -1544,11 +1560,12 @@ static void __devinit detect_and_report_static void __devinit detect_and_report_it87 (void ) {u16 dev; -u8 r; +u8 origval, r;if (verbose_probing)printk (KERN_DEBUG "IT8705 Super-IO detection, now testing port 2E ...\n" ); -if (!request_region (0x2e ,1 , __func__)) +if (!request_region (0x2e ,2 , __func__))return ; + origval =inb (0x2e );/* Save original value */ outb (0x87 ,0x2e );outb (0x01 ,0x2e );outb (0x55 ,0x2e );
@@ -1568,8 +1585,10 @@ static void __devinit detect_and_report_outb (r |8 ,0x2F );outb (0x02 ,0x2E );/* Lock */ outb(0x02, 0x2F); + }else { +outb (origval,0x2e );/* Oops, sorry to disturb */ } -release_region (0x2e ,1 ); +release_region (0x2e ,2 ); }#endif /* CONFIG_PARPORT_PC_SUPERIO */
PATCH 26/35 parport_pc: set properly the dma_mask for parport_pc device
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: FUJITA Tomonori <[email protected]>
commit dfa7c4d869b7d3d37b70f1de856f2901b6ebfcf0 upstream.
parport_pc_probe_port() creates the own 'parport_pc' device if the device argument is NULL. Then parport_pc_probe_port() doesn't initialize the dma_mask and coherent_dma_mask of the device and calls dma_alloc_coherent with it. dma_alloc_coherent fails because dma_alloc_coherent() doesn't accept the uninitialized dma_mask:
http://lkml.org/lkml/2009/6/16/150
Long ago, X86_32 and X86_64 had the own dma_alloc_coherent implementations; X86_32 accepted a device having dma_mask that is not initialized however X86_64 didn't. When we merged them, we chose to prohibit a device having dma_mask that is not initialized. I think that it's good to require drivers to set up dma_mask (and coherent_dma_mask) properly if the drivers want DMA.
--- drivers/parport/parport_pc.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/parport/parport_pc.c +3 -0
@@ -2211,6 +2211,9 @@ struct parport *parport_pc_probe_port (uif (IS_ERR (pdev))return NULL ; dev = &pdev->dev; + + dev->coherent_dma_mask =DMA_BIT_MASK (24 ); + dev->dma_mask = &dev->coherent_dma_mask; } ops =kmalloc (sizeof (struct parport_operations ),GFP_KERNEL );
PATCH 27/35 PCI PM: Fix handling of devices without PM support by pci_target_state()
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Rafael J. Wysocki <[email protected]>
commit d2abdf62882d982c58e7a6b09ecdcfcc28075e2e upstream.
If a PCI device is not power-manageable either by the platform, or with the help of the native PCI PM interface, pci_target_state() will return either PCI_D3hot, or PCI_POWER_ERROR for it, depending on whether or not the device is configured to wake up the system. Alas, none of these return values is correct, because each of them causes pci_prepare_to_sleep() to return error code, although it should complete successfully in such a case.
Fix this problem by making pci_target_state() always return PCI_D0 for devices that cannot be power managed.
--- drivers/pci/pci.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/pci/pci.c +2 -3
@@ -1196,15 +1196,14 @@ pci_power_t pci_target_state(struct pci_default : target_state = state; } + }else if (!dev->pm_cap) { + target_state =PCI_D0 ; }else if (device_may_wakeup (&dev->dev)) {/* * Find the deepest state from which the device can generate * wake-up events, make it the target state and enable device * to generate PME#. */ -if (!dev->pm_cap) -return PCI_POWER_ERROR ; -if (dev->pme_support) {while (target_state && !(dev->pme_support & (1 << target_state)))
PATCH 29/35 pcmcia/cm4000: fix lock imbalance
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jiri Slaby <[email protected]>
commit 69ae59d7d8df14413cf0a97b3e372d7dc8352563 upstream.
Don't return from switch/case, break instead, so that we unlock BKL.
--- drivers/char/pcmcia/cm4000_cs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/char/pcmcia/cm4000_cs.c +2 -1
@@ -1575,7 +1575,8 @@ static long cmm_ioctl(struct file *filp,clear_bit (LOCK_IO , &dev->flags);wake_up_interruptible (&dev->ioq); -return 0 ; + rc =0 ; +break ;case CM_IOCSPTS : {struct ptsreq krnptsreq;
PATCH 28/35 PCI PM: Follow PCI_PM_CTRL_NO_SOFT_RESET during transitions from D3
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Rafael J. Wysocki <[email protected]>
commit f62795f1e892ca9269849fa83de97621da7e02c0 upstream.
According to the PCI PM specification (PCI Bus Power Management Interface Specification, Rev. 1.2, Section 5.4.1) we are supposed to reinitialize devices that have PCI_PM_CTRL_NO_SOFT_RESET clear during all transitions from PCI_D3hot to PCI_D0, but we only do it if the device's current_state field is equal to PCI_UNKNOWN.
This may lead to problems if a device with PCI_PM_CTRL_NO_SOFT_RESET unset is put into PCI_D3hot at run time by its driver and pci_set_power_state() is used to put it back into PCI_D0, because in that case the device will remain uninitialized after pci_set_power_state() has returned. Prevent that from happening by modifying pci_raw_set_power_state() to reinitialize devices with PCI_PM_CTRL_NO_SOFT_RESET unset during all transitions from D3 to D0.
--- drivers/pci/pci.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/pci/pci.c +2 -0
@@ -479,6 +479,8 @@ pci_raw_set_power_state(struct pci_dev * pmcsr &= ~PCI_PM_CTRL_STATE_MASK ; pmcsr |= state;break ; +case PCI_D3hot: +case PCI_D3cold:case PCI_UNKNOWN :/* Boot-up */ if ((pmcsr &PCI_PM_CTRL_STATE_MASK ) == PCI_D3hot && !(pmcsr &PCI_PM_CTRL_NO_SOFT_RESET )) {
PATCH 30/35 qla2xxx: Correct (again) overflow during dump-processing on large-memory ISP23xx parts.
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Andrew Vasquez <[email protected]>
commit e18e963b7e533149676b5d387d0a56160df9f111 upstream.
Commit 7b867cf76fbcc8d77867cbec6f509f71dce8a98f ([SCSI] qla2xxx:
Refactor qla data structures) inadvertently reverted e792121ec85672c1fa48f79d13986a3f4f56c590 ([SCSI] qla2xxx: Correct overflow during dump-processing on large-memory ISP23xx parts.).
--- drivers/scsi/qla2xxx/qla_dbg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/qla2xxx/qla_dbg.c +1 -1
@@ -218,7 +218,7 @@ qla24xx_soft_reset(struct qla_hw_data *hstatic int qla2xxx_dump_ram (struct qla_hw_data *ha,uint32_t addr,uint16_t *ram, -uint16_t ram_words,void **nxt) +uint32_t ram_words,void **nxt) {int rval;uint32_t cnt, stat, timer, words, idx;
PATCH 32/35 mm: fix handling of pagesets for downed cpus
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Dimitri Sivanich <[email protected]>
commit 364df0ebfbbb1330bfc6ca159f4d6020efc15a12 upstream.
After downing/upping a cpu, an attempt to set /proc/sys/vm/percpu_pagelist_fraction results in an oops in percpu_pagelist_fraction_sysctl_handler().
If a processor is downed then we need to set the pageset pointer back to the boot pageset.
Updates of the high water marks should not access pagesets of unpopulated zones (those pointer go to the boot pagesets which would be no longer functional if their size would be increased beyond zero).
--- mm/page_alloc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
mm/page_alloc.c +4 -2
@@ -2804,7 +2804,7 @@ bad:if (dzone == zone)break ;kfree (zone_pcp (dzone, cpu)); -zone_pcp (dzone, cpu) =NULL ; +zone_pcp (dzone, cpu) = &boot_pageset[cpu]; }return -ENOMEM ; }
@@ -2819,7 +2819,7 @@ static inline void free_zone_pagesets(in/* Free per_cpu_pageset if it is slab allocated */ if (pset != &boot_pageset[cpu])kfree (pset); -zone_pcp (zone, cpu) =NULL ; +zone_pcp (zone, cpu) = &boot_pageset[cpu]; } }
@@ -4494,6 +4494,8 @@ int percpu_pagelist_fraction_sysctl_handif (!write || (ret == -EINVAL ))return ret;for_each_zone (zone) { +if (!populated_zone (zone)) +continue ;for_each_online_cpu (cpu) {unsigned long high; high = zone->present_pages / percpu_pagelist_fraction;
PATCH 31/35 sound: seq_midi_event: fix decoding of (N)RPN events
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Clemens Ladisch <[email protected]>
commit 6423f9ea8035138d70bae1a278d3b57b743f8b3e upstream.
When decoding (N)RPN sequencer events into raw MIDI commands, the extra_decode_xrpn() function had accidentally swapped the MSB and LSB controller values of both the parameter number and the data value.
--- sound/core/seq/seq_midi_event.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
sound/core/seq/seq_midi_event.c +4 -4
@@ -504,10 +504,10 @@ static int extra_decode_xrpn(struct snd_if (dev->nostat && count <12 )return -ENOMEM ; cmd =MIDI_CMD_CONTROL |(ev->data.control.channel &0x0f ); - bytes[0 ] = ev->data.control.param &0x007f ; - bytes[1 ] = (ev->data.control.param &0x3f80 ) >>7 ; - bytes[2 ] = ev->data.control.value &0x007f ; - bytes[3 ] = (ev->data.control.value &0x3f80 ) >>7 ; + bytes[0 ] = (ev->data.control.param &0x3f80 ) >>7 ; + bytes[1 ] = ev->data.control.param &0x007f ; + bytes[2 ] = (ev->data.control.value &0x3f80 ) >>7 ; + bytes[3 ] = ev->data.control.value &0x007f ;if (cmd != dev->lastcmd && !dev->nostat) {if (count <9 )return -ENOMEM ;
PATCH 33/35 dm mpath: validate table argument count
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Mikulas Patocka <[email protected]>
commit 0e0497c0c017664994819f4602dc07fd95896c52 upstream.
The parser reads the argument count as a number but doesn't check that sufficient arguments are supplied. This command triggers the bug:
dmsetup create mpath --table "0 blockdev --getsize /dev/mapper/cr0
multipath 0 0 2 1 round-robin 1000 0 1 1 /dev/mapper/cr0
round-robin 0 1 1 /dev/mapper/cr1 1000"kernel BUG at drivers/md/dm-mpath.c:530!
--- drivers/md/dm-mpath.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/md/dm-mpath.c +6 -0
@@ -554,6 +554,12 @@ static int parse_path_selector(struct arreturn -EINVAL ; } +if (ps_argc > as->argc) { +dm_put_path_selector (pst); + ti->error ="not enough arguments for path selector" ; +return -EINVAL ; + } + r = pst->create (&pg->ps, ps_argc, as->argv);if (r) {dm_put_path_selector (pst);
PATCH 34/35 dm mpath: validate hw_handler argument count
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Mikulas Patocka <[email protected]>
commit e094f4f15f5169526c7200b9bde44b900548a81e upstream.
Fix arg count parsing error in hw handlers.
--- drivers/md/dm-mpath.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/md/dm-mpath.c +5 -0
@@ -706,6 +706,11 @@ static int parse_hw_handler(struct arg_sif (!hw_argc)return 0 ; +if (hw_argc > as->argc) { + ti->error ="not enough arguments for hardware handler" ; +return -EINVAL ; + } + m->hw_handler_name =kstrdup (shift (as),GFP_KERNEL );request_module ("scsi_dh_%s" , m->hw_handler_name);if (scsi_dh_handler_exist (m->hw_handler_name) ==0 ) {
PATCH 35/35 dm: sysfs skip output when device is being destroyed
In reply to Greg KH2.6.29-stable review patch. If anyone has any objections, please let us know.
------------------
From: Milan Broz <[email protected]>
commit 4d89b7b4e4726893453d0fb4ddbb5b3e16353994 upstream.
Do not process sysfs attributes when device is being destroyed.
Otherwise code can cause
BUG_ON(test_bit(DMF_FREEING, &md->flags));
in dm_put() call.
--- drivers/md/dm.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/md/dm.c +4 -0
@@ -1728,6 +1728,10 @@ struct mapped_device *dm_get_from_kobjecif (&md->kobj != kobj)return NULL ; +if (test_bit (DMF_FREEING , &md->flags) || +test_bit (DMF_DELETING , &md->flags)) +return NULL ; +dm_get (md);return md; }