Skip to contentSkip to conversation

qemu-io: small cleanups for the aio code

PATCH In review Christoph Hellwig 4 participants 7 messages Jul 1, 2009 – Jul 10, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 qemu-io: small cleanups for the aio code

Address a couple of review comments from Kevin.

qemu-io.c +15 -23
Index: qemu/qemu-io.c
===================================================================
@@ -769,25 +769,23 @@ aio_write_done(void *opaque, int ret)
 {
 	struct aio_ctx *ctx = opaque;
 	struct timeval t2;
-	int total;
-	int cnt = 1;
 
 	gettimeofday(&t2, NULL);
 
-	total = ctx->qiov.size;
 
 	if (ret < 0) {
 		printf("aio_write failed: %s\n", strerror(-ret));
 		return;
 	}
 
-	if (ctx->qflag)
+	if (ctx->qflag) {
 		return;
+	}
 
 	/* Finally, report back -- -C gives a parsable format */
 	t2 = tsub(t2, ctx->t1);
-	print_report("wrote", &t2, ctx->offset, ctx->qiov.size, total, cnt,
-		     ctx->Cflag);
+	print_report("wrote", &t2, ctx->offset, ctx->qiov.size,
+		     ctx->qiov.size, 1, ctx->Cflag);
 
 	qemu_io_free(ctx->buf);
 	free(ctx);
@@ -800,44 +798,41 @@ aio_read_done(void *opaque, int ret)
 {
 	struct aio_ctx *ctx = opaque;
 	struct timeval t2;
-	int total;
-	int cnt = 1;
 
 	gettimeofday(&t2, NULL);
 
-	total = ctx->qiov.size;
-
 	if (ret < 0) {
 		printf("readv failed: %s\n", strerror(-ret));
 		return;
 	}
 
 	if (ctx->Pflag) {
-		void *cmp_buf = malloc(total);
+		void *cmp_buf = malloc(ctx->qiov.size);
 
-		memset(cmp_buf, ctx->pattern, total);
-		if (memcmp(ctx->buf, cmp_buf, total)) {
+		memset(cmp_buf, ctx->pattern, ctx->qiov.size);
+		if (memcmp(ctx->buf, cmp_buf, ctx->qiov.size)) {
 			printf("Pattern verification failed at offset %lld, "
 				"%d bytes\n",
-				(long long) ctx->offset, total);
+				(long long) ctx->offset, ctx->qiov.size);
 		}
 		free(cmp_buf);
 	}
 
-	if (ctx->qflag)
+	if (ctx->qflag) {
 		return;
+	}
 
-        if (ctx->vflag)
-		dump_buffer(ctx->buf, ctx->offset, total);
+	if (ctx->vflag) {
+		dump_buffer(ctx->buf, ctx->offset, ctx->qiov.size);
+	}
 
 	/* Finally, report back -- -C gives a parsable format */
 	t2 = tsub(t2, ctx->t1);
-	print_report("read", &t2, ctx->offset, ctx->qiov.size, total, cnt,
-		     ctx->Cflag);
+	print_report("read", &t2, ctx->offset, ctx->qiov.size,
+		     ctx->qiov.size, 1, ctx->Cflag);
 
 	qemu_io_free(ctx->buf);
 	free(ctx);
-
 }
 
 static void
@@ -870,8 +865,6 @@ aio_read_f(int argc, char **argv)
 	struct aio_ctx *ctx = calloc(1, sizeof(struct aio_ctx));
 	BlockDriverAIOCB *acb;
 
-	ctx->pattern = 0xcd;
-
 	while ((c = getopt(argc, argv, "CP:qv")) != EOF) {
 		switch (c) {
 		case 'C':
@@ -1035,7 +1028,6 @@ aio_write_f(int argc, char **argv)
 		return 0;
 	}
 
-
 	for (i = optind; i < argc; i++) {
 	        size_t len;
 
#1 lore raw

qemu-io.c aio_read_done(void *opaque, int ret) · line 816

Quoted 13 lines · Christoph Hellwig
qemu-io.c +4 -4
 	if (ctx->Pflag) {
-		void *cmp_buf = malloc(total);
+		void *cmp_buf = malloc(ctx->qiov.size);
 
-		memset(cmp_buf, ctx->pattern, total);
-		if (memcmp(ctx->buf, cmp_buf, total)) {
+		memset(cmp_buf, ctx->pattern, ctx->qiov.size);
+		if (memcmp(ctx->buf, cmp_buf, ctx->qiov.size)) {
 			printf("Pattern verification failed at offset %lld, "
 				"%d bytes\n",
-				(long long) ctx->offset, total);
+				(long long) ctx->offset, ctx->qiov.size);

This breaks the build because ctx->qiov.size is a size_t and your format parameter is a %d.

Regards,

Anthony Liguori

#2 lore raw
Quoted 11 lines · Anthony Liguori

qemu-io.c aio_read_done(void *opaque, int ret) · line 816

Quoted 8 lines
qemu-io.c +2 -1
-		if (memcmp(ctx->buf, cmp_buf, total)) {
+		memset(cmp_buf, ctx->pattern, ctx->qiov.size);
+		if (memcmp(ctx->buf, cmp_buf, ctx->qiov.size)) {
			printf("Pattern verification failed at offset %lld, "
				"%d bytes\n",
qemu-io.c +1 -1
-				(long long) ctx->offset, total);
+				(long long) ctx->offset, ctx->qiov.size);

This breaks the build because ctx->qiov.size is a size_t and your format parameter is a %d.

Work fine on 32 bit x86 :) But yeah, the correct format that works on all platforms would be %zd.

#3 lore raw
Quoted 13 lines · Christoph Hellwig
Quoted 11 lines · Anthony Liguori

qemu-io.c aio_read_done(void *opaque, int ret) · line 816

Quoted 8 lines
qemu-io.c +2 -1
-		if (memcmp(ctx->buf, cmp_buf, total)) {
+		memset(cmp_buf, ctx->pattern, ctx->qiov.size);
+		if (memcmp(ctx->buf, cmp_buf, ctx->qiov.size)) {
			printf("Pattern verification failed at offset %lld, "
				"%d bytes\n",
qemu-io.c +1 -1
-				(long long) ctx->offset, total);
+				(long long) ctx->offset, ctx->qiov.size);

This breaks the build because ctx->qiov.size is a size_t and your format parameter is a %d.

Quoted 2 lines

Work fine on 32 bit x86 :) But yeah, the correct format that works on all platforms would be %zd.

Just a small correction - it wouldn't work on Windows.

Signature · 1 line
mailto:[email protected]
#4 lore raw
Quoted 4 lines · malc
Quoted 2 lines

Work fine on 32 bit x86 :) But yeah, the correct format that works on all platforms would be %zd.

Just a small correction - it wouldn't work on Windows.

Why would it generally not work on windows? %zd is in C99 and thus it should be supported by any recent Windows compiler and library.

#5 lore raw
Quoted 8 lines · Christoph Hellwig
Quoted 4 lines · malc
Quoted 2 lines

Work fine on 32 bit x86 :) But yeah, the correct format that works on all platforms would be %zd.

Just a small correction - it wouldn't work on Windows.

Why would it generally not work on windows? %zd is in C99 and thus it should be supported by any recent Windows compiler and library.

Windows compilers don't generally support C99.

-- Jamie

#6 lore raw
In reply to Christoph Hellwig
Quoted 8 lines · Christoph Hellwig
Quoted 4 lines · malc
Quoted 2 lines

Work fine on 32 bit x86 :) But yeah, the correct format that works on all platforms would be %zd.

Just a small correction - it wouldn't work on Windows.

Why would it generally not work on windows? %zd is in C99 and thus it should be supported by any recent Windows compiler and library.

GCC the compiler does support it, the mingw32's runtime library though does not.

Signature · 1 line
mailto:[email protected]