Skip to contentSkip to conversation

rt2x00: use wiphy rfkill interface

PATCH In review Ivo van Doorn 2 participants 2 messages Jul 1, 2009 Networking drivers (wireless)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 rt2x00: use wiphy rfkill interface

Remove the input_polldev from rt2x00 and replace it with the rfkill interface offered by the wiphy structure. This simplifies the entire rfkill handling in rt2x00 and allows us to remove the CONFIG_RT2X00_LIB_RFKILL option and always enables rfkill capabilities.

---
 drivers/net/wireless/rt2x00/Kconfig        |    8 --
 drivers/net/wireless/rt2x00/Makefile       |    1 -
 drivers/net/wireless/rt2x00/rt2400pci.c    |    7 +--
 drivers/net/wireless/rt2x00/rt2500pci.c    |    7 +--
 drivers/net/wireless/rt2x00/rt2500usb.c    |    7 +--
 drivers/net/wireless/rt2x00/rt2800usb.c    |    7 +--
 drivers/net/wireless/rt2x00/rt2x00.h       |   13 +---
 drivers/net/wireless/rt2x00/rt2x00dev.c    |    2 -
 drivers/net/wireless/rt2x00/rt2x00lib.h    |   21 +----
 drivers/net/wireless/rt2x00/rt2x00mac.c    |    9 ++
 drivers/net/wireless/rt2x00/rt2x00rfkill.c |  127 ----------------------------
 drivers/net/wireless/rt2x00/rt61pci.c      |    7 +--
 drivers/net/wireless/rt2x00/rt73usb.c      |    7 +--
 13 files changed, 20 insertions(+), 203 deletions(-)
 delete mode 100644 drivers/net/wireless/rt2x00/rt2x00rfkill.c
drivers/net/wireless/rt2x00/Kconfig +0 -8
index b6e8fb4..96f9d61 100644
@@ -142,14 +142,6 @@ config RT2X00_LIB_FIRMWARE
 config RT2X00_LIB_CRYPTO
 	boolean
 
-config RT2X00_LIB_RFKILL
-	boolean
-	default y if (RT2X00_LIB=y && INPUT=y) || (RT2X00_LIB=m && INPUT!=n)
-	select INPUT_POLLDEV
-
-comment "rt2x00 rfkill support disabled due to modularized INPUT and built-in rt2x00"
-	depends on RT2X00_LIB=y && INPUT=m
-
 config RT2X00_LIB_LEDS
 	boolean
 	default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
drivers/net/wireless/rt2x00/Makefile +0 -1
index 2d1be47..912f5f6 100644
@@ -5,7 +5,6 @@ rt2x00lib-y				+= rt2x00queue.o
 rt2x00lib-y				+= rt2x00link.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS)	+= rt2x00debug.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO)	+= rt2x00crypto.o
-rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL)	+= rt2x00rfkill.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE)	+= rt2x00firmware.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS)	+= rt2x00leds.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_HT)	+= rt2x00ht.o
drivers/net/wireless/rt2x00/rt2400pci.c +1 -6
index 435f945..d8035e3 100644
@@ -199,7 +199,6 @@ static const struct rt2x00debug rt2400pci_rt2x00debug = {
 };
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
-#ifdef CONFIG_RT2X00_LIB_RFKILL
 static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -207,9 +206,6 @@ static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 	rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
 	return rt2x00_get_field32(reg, GPIOCSR_BIT0);
 }
-#else
-#define rt2400pci_rfkill_poll	NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 #ifdef CONFIG_RT2X00_LIB_LEDS
 static void rt2400pci_brightness_set(struct led_classdev *led_cdev,
@@ -1391,10 +1387,8 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Detect if this device has an hardware controlled radio.
 	 */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
 	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
 		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 	/*
 	 * Check if the BBP tuning should be enabled.
@@ -1573,6 +1567,7 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt2400pci_get_tsf,
 	.tx_last_beacon		= rt2400pci_tx_last_beacon,
+	.rfkill_poll		= rt2x00mac_rfkill_poll,
 };
 
 static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
drivers/net/wireless/rt2x00/rt2500pci.c +1 -6
index 08b30d0..c123e28 100644
@@ -199,7 +199,6 @@ static const struct rt2x00debug rt2500pci_rt2x00debug = {
 };
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
-#ifdef CONFIG_RT2X00_LIB_RFKILL
 static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -207,9 +206,6 @@ static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 	rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
 	return rt2x00_get_field32(reg, GPIOCSR_BIT0);
 }
-#else
-#define rt2500pci_rfkill_poll	NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 #ifdef CONFIG_RT2X00_LIB_LEDS
 static void rt2500pci_brightness_set(struct led_classdev *led_cdev,
@@ -1548,10 +1544,8 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Detect if this device has an hardware controlled radio.
 	 */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
 	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
 		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 	/*
 	 * Check if the BBP tuning should be enabled.
@@ -1872,6 +1866,7 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt2500pci_get_tsf,
 	.tx_last_beacon		= rt2500pci_tx_last_beacon,
+	.rfkill_poll		= rt2x00mac_rfkill_poll,
 };
 
 static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
drivers/net/wireless/rt2x00/rt2500usb.c +1 -6
index 66daf68..795706d 100644
@@ -277,7 +277,6 @@ static const struct rt2x00debug rt2500usb_rt2x00debug = {
 };
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
-#ifdef CONFIG_RT2X00_LIB_RFKILL
 static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 {
 	u16 reg;
@@ -285,9 +284,6 @@ static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 	rt2500usb_register_read(rt2x00dev, MAC_CSR19, &reg);
 	return rt2x00_get_field32(reg, MAC_CSR19_BIT7);
 }
-#else
-#define rt2500usb_rfkill_poll	NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 #ifdef CONFIG_RT2X00_LIB_LEDS
 static void rt2500usb_brightness_set(struct led_classdev *led_cdev,
@@ -1601,10 +1597,8 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Detect if this device has an hardware controlled radio.
 	 */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
 	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
 		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 	/*
 	 * Check if the BBP tuning should be disabled.
@@ -1905,6 +1899,7 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt2x00mac_conf_tx,
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
+	.rfkill_poll		= rt2x00mac_rfkill_poll,
 };
 
 static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
drivers/net/wireless/rt2x00/rt2800usb.c +1 -6
index 3756166..a204e66 100644
@@ -264,7 +264,6 @@ static const struct rt2x00debug rt2800usb_rt2x00debug = {
 };
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
-#ifdef CONFIG_RT2X00_LIB_RFKILL
 static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -272,9 +271,6 @@ static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 	rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
 	return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
 }
-#else
-#define rt2800usb_rfkill_poll	NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 #ifdef CONFIG_RT2X00_LIB_LEDS
 static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
@@ -2385,10 +2381,8 @@ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Detect if this device has an hardware controlled radio.
 	 */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
 	if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
 		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 	/*
 	 * Store led settings, for correct led behaviour.
@@ -2800,6 +2794,7 @@ static const struct ieee80211_ops rt2800usb_mac80211_ops = {
 	.conf_tx		= rt2800usb_conf_tx,
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt2800usb_get_tsf,
+	.rfkill_poll		= rt2x00mac_rfkill_poll,
 };
 
 static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
drivers/net/wireless/rt2x00/rt2x00.h +1 -12
index 509ab90..de3f13a 100644
@@ -657,18 +657,6 @@ struct rt2x00_dev {
 	enum ieee80211_band curr_band;
 
 	/*
-	 * rfkill structure for RF state switching support.
-	 * This will only be compiled in when required.
-	 */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
-	unsigned long rfkill_state;
-#define RFKILL_STATE_ALLOCATED		1
-#define RFKILL_STATE_REGISTERED		2
-#define RFKILL_STATE_BLOCKED		3
-	struct input_polled_dev *rfkill_poll_dev;
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
-
-	/*
 	 * If enabled, the debugfs interface structures
 	 * required for deregistration of debugfs.
 	 */
@@ -998,6 +986,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 				u32 changes);
 int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
 		      const struct ieee80211_tx_queue_params *params);
+void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw);
 
 /*
  * Driver allocation handlers.
drivers/net/wireless/rt2x00/rt2x00dev.c +0 -2
index 41e3379..4fff3a8 100644
@@ -871,7 +871,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00link_register(rt2x00dev);
 	rt2x00leds_register(rt2x00dev);
-	rt2x00rfkill_allocate(rt2x00dev);
 	rt2x00debug_register(rt2x00dev);
 
 	set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
@@ -903,7 +902,6 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	 * Free extra components
 	 */
 	rt2x00debug_deregister(rt2x00dev);
-	rt2x00rfkill_free(rt2x00dev);
 	rt2x00leds_unregister(rt2x00dev);
 
 	/*
drivers/net/wireless/rt2x00/rt2x00lib.h +4 -17
index 39e00b3..2c3c239 100644
@@ -30,10 +30,8 @@
 
 /*
  * Interval defines
- * Both the link tuner as the rfkill will be called once per second.
  */
 #define LINK_TUNE_INTERVAL	round_jiffies_relative(HZ)
-#define RFKILL_POLL_INTERVAL	1000
 
 /*
  * rt2x00_rate: Per rate device information
@@ -386,29 +384,18 @@ static inline void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
 /*
  * RFkill handlers.
  */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
-void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev);
-void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev);
-void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev);
-void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev);
-#else
 static inline void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
 {
+	if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+		wiphy_rfkill_start_polling(rt2x00dev->hw->wiphy);
 }
 
 static inline void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
 {
+	if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+		wiphy_rfkill_stop_polling(rt2x00dev->hw->wiphy);
 }
 
-static inline void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
-{
-}
-
-static inline void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
-{
-}
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
-
 /*
  * LED handlers
  */
drivers/net/wireless/rt2x00/rt2x00mac.c +9 -0
index 475a3ed..b7e0ddd 100644
@@ -688,3 +688,12 @@ int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_conf_tx);
+
+void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	bool blocked = !!rt2x00dev->ops->lib->rfkill_poll(rt2x00dev);
+
+	wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_rfkill_poll);
drivers/net/wireless/rt2x00/rt2x00rfkill.c deleted +0 -127

127 lines not on this page · raw message

drivers/net/wireless/rt2x00/rt61pci.c +1 -6
index 49b29ff..8a49d99 100644
@@ -237,7 +237,6 @@ static const struct rt2x00debug rt61pci_rt2x00debug = {
 };
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
-#ifdef CONFIG_RT2X00_LIB_RFKILL
 static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -245,9 +244,6 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 	rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
 	return rt2x00_get_field32(reg, MAC_CSR13_BIT5);
 }
-#else
-#define rt61pci_rfkill_poll	NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 #ifdef CONFIG_RT2X00_LIB_LEDS
 static void rt61pci_brightness_set(struct led_classdev *led_cdev,
@@ -2338,10 +2334,8 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Detect if this device has an hardware controlled radio.
 	 */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
 	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
 		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 	/*
 	 * Read frequency offset and RF programming sequence.
@@ -2728,6 +2722,7 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
 	.conf_tx		= rt61pci_conf_tx,
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt61pci_get_tsf,
+	.rfkill_poll		= rt2x00mac_rfkill_poll,
 };
 
 static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
drivers/net/wireless/rt2x00/rt73usb.c +1 -6
index c188488..ad2898c 100644
@@ -183,7 +183,6 @@ static const struct rt2x00debug rt73usb_rt2x00debug = {
 };
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
-#ifdef CONFIG_RT2X00_LIB_RFKILL
 static int rt73usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -191,9 +190,6 @@ static int rt73usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 	rt2x00usb_register_read(rt2x00dev, MAC_CSR13, &reg);
 	return rt2x00_get_field32(reg, MAC_CSR13_BIT7);
 }
-#else
-#define rt73usb_rfkill_poll	NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 #ifdef CONFIG_RT2X00_LIB_LEDS
 static void rt73usb_brightness_set(struct led_classdev *led_cdev,
@@ -1863,10 +1859,8 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Detect if this device has an hardware controlled radio.
 	 */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
 	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
 		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 	/*
 	 * Read frequency offset.
@@ -2253,6 +2247,7 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
 	.conf_tx		= rt73usb_conf_tx,
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt73usb_get_tsf,
+	.rfkill_poll		= rt2x00mac_rfkill_poll,
 };
 
 static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
Signature · 1 line
1.6.3.1
#1 lore raw

Hi Ivo,

Quoted 5 lines

Remove the input_polldev from rt2x00 and replace it with the rfkill interface offered by the wiphy structure. This simplifies the entire rfkill handling in rt2x00 and allows us to remove the CONFIG_RT2X00_LIB_RFKILL option and always enables rfkill capabilities.

as I mentioned in Berlin last week, I think this is the right way of doing this. So ACK.

Regards

Marcel