2.6.31-rc1: zaurus suspend regressing
Hi!
In 2.6.30, spitz suspended with PSPR fix + charging disabled.
In 2.6.31-rc1, PSPR fix is in, but suspend does not work, not even with charging disabled.
Any ideas?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 8 lines · Pavel Machek
Hi!
In 2.6.30, spitz suspended with PSPR fix + charging disabled.
In 2.6.31-rc1, PSPR fix is in, but suspend does not work, not even with charging disabled.
Any ideas?
Tried -rc2-git, still broken. Even pm-test=devices killed the machine, so I hope it is the IDE problem that should be fixed in -rc3.
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 5 lines · - Cortez -
Hi,
Just tried to test suspend/resume with 2.6.31-rc3 on spitz (with charging disabled). This results in following kernel panic:
I suspect this is caused by commit 15bce40cb3133bcc07d548013df97e4653d363c1
[MTD] Restore suspend/resume support for mtd devices
This is intended to suspend/resume the _chip_, while we leave board drivers to handle their own suspend/resume for the controller.
Cortez,
Could you please revert this and give another try?
Quoted 117 lines
Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 0 [#1] PREEMPT Modules linked in: CPU: 0 Tainted: G W (2.6.31-rc3-omegamoon-spitz #1) PC is at 0x0 LR is at 0xc39cad3c pc : [<00000000>] lr : [<c39cad3c>] psr: 60000013sp :
c3195ff8ip :c39c9f00fp :c39c9efc
r10:c03ce9b8r9 : 00000005 r8 :c39ca7b4
r7 : 00000000 r6 : 00000000 r5 :c39ca780r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 00000002 r0 : 00000000
Flags: nZCv IRQs on FIQs on ModeSVC_32ISA ARM Segment kernel
Control:0000397fTable:a1168000DAC: 00000017 Process kapmd (pid: 1426, stack limit =0xc3194278)Stack: (0xc3195ff8 to 0xc3196000) 5fe0: 00000000 00000000 Backtrace: [<c021f2fc>] (mtd_cls_suspend+0x0/0x30) from [<c02029e4>] (dpm_suspend_start+0x2 ac/0x444) [<c0202738>] (dpm_suspend_start+0x0/0x444) from [<c0067500>] (suspend_devices_an d_enter+0x48/0x198) [<c00674b8>] (suspend_devices_and_enter+0x0/0x198) from [<c0067704>] (enter_stat e+0xb4/0xf4) r6:c040e608 r5:00000003 r4:00000000 [<c0067650>] (enter_state+0x0/0xf4) from [<c0067768>] (pm_suspend+0x24/0x28) r5:c39c8000 r4:0000000a [<c0067744>] (pm_suspend+0x0/0x28) from [<c01f6858>] (kapmd+0x174/0x1d8) [<c01f66e4>] (kapmd+0x0/0x1d8) from [<c0051284>] (kthread+0x80/0x84) [<c0051204>] (kthread+0x0/0x84) from [<c003bedc>] (do_exit+0x0/0x6dc) r7:00000000 r6:00000000 r5:00000000 r4:00000000 Code: bad PC value. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 0 [#2] PREEMPT Modules linked in: CPU: 0 Tainted: G D W (2.6.31-rc3-omegamoon-spitz #1) PC is at 0x0 LR is at 0xc39cad3c pc : [<00000000>] lr : [<c39cad3c>] psr: 60000013sp :
c39c9ef0ip :c39c9f00fp :c39c9efc
r10:c03ce9b8r9 : 00000005 r8 :c39ca7b4
r7 : 00000002 r6 : 00000000 r5 :c39ca780r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 00000002 r0 : 00000592
Flags: nZCv IRQs on FIQs on ModeSVC_32ISA ARM Segment kernel
Control:0000397fTable:a1168000DAC: 00000017 Process kapmd (pid: 307, stack limit =0xc39c8278)Stack: (0xc39c9ef0 to 0xc39ca000)9ee0:
c39c9f34c39c9f00c02029e4c021f308
9f00:c3aa64acc2e8335cc39c9f2c00000000c03e0ce800000003c39c9f84c040e5f8
9f20: 00000000c39c9f90c39c9f54c39c9f38c0067500c020274400000000 00000000
9f40: 00000003c040e608c39c9f6cc39c9f58c0067704c00674c40000000ac39c8000
9f60:c39c9f7cc39c9f70c0067768c006765cc39c9fc4c39c9f80c01f6858c0067750
9f80:c39c9fc400000000c3ad4000c005136cc39c9f90c39c9f90c39c9fc4c39c9fcc
9fa0:c3825ef800000000c01f66e400000000 00000000 00000000c39c9ff4c39c9fc8
9fc0:c0051284c01f66f000000000 00000000c39c9fd0c39c9fd000000000 00000000
9fe0: 00000000 00000000 00000000c39c9ff8c003bedcc0051210726f737374656420Backtrace: [<c021f2fc>] (mtd_cls_suspend+0x0/0x30) from [<c02029e4>] (dpm_suspend_start+0x2 ac/0x444) [<c0202738>] (dpm_suspend_start+0x0/0x444) from [<c0067500>] (suspend_devices_an d_enter+0x48/0x198) [<c00674b8>] (suspend_devices_and_enter+0x0/0x198) from [<c0067704>] (enter_stat e+0xb4/0xf4) r6:c040e608 r5:00000003 r4:00000000 [<c0067650>] (enter_state+0x0/0xf4) from [<c0067768>] (pm_suspend+0x24/0x28) r5:c39c8000 r4:0000000a [<c0067744>] (pm_suspend+0x0/0x28) from [<c01f6858>] (kapmd+0x174/0x1d8) [<c01f66e4>] (kapmd+0x0/0x1d8) from [<c0051284>] (kthread+0x80/0x84) [<c0051204>] (kthread+0x0/0x84) from [<c003bedc>] (do_exit+0x0/0x6dc) r7:00000000 r6:00000000 r5:00000000 r4:00000000 Code: bad PC value. ---[ end trace 1b75b31a2719ed1e ]--- ---[ end trace 1b75b31a2719ed1f ]---Quoted 8 lines · Pavel Machek
Quoted 7 lines · Pavel Machek
Hi!
In 2.6.30, spitz suspended with PSPR fix + charging disabled.
In 2.6.31-rc1, PSPR fix is in, but suspend does not work, not even with charging disabled.
Quoted 9 lines
Quoted 1 line
Any ideas?
Tried -rc2-git, still broken. Even pm-test=devices killed the machine, so I hope it is the IDE problem that should be fixed in -rc3.
--
(english) http://www.livejournal.com/~pavelmachek<http://www.livejournal.com/%7Epavelmachek>
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html<http://atrey.karlin.mff.cuni.cz/%7Epavel/picture/horses/blog.html>-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
Quoted 7 lines · - Cortez -
Eric,
Thanks a lot, that worked. I hereby confirm that suspend/resume for spitz (SL-C3100) works again in 2.6.31-rc3 when reverting commit
15bce40cb3133bcc07d548013df97e4653d363c1. Apart from disabling the offline charging, which is still needed, I applied following patch:
David,
Could you please have a look into commit 15bce40c, which seems to cause some trouble on spitz?
Quoted 240 lines
diff -Naur
ori/drivers/mtd/mtdcore.cnew/drivers/mtd/mtdcore.cdrivers/mtd/mtdcore.c 2009-07-20 21:38:51.000000000 +0200 renamed from drivers/mtd/mtdcore.c 2009-07-13 22:26:13.000000000 +0200 +9
-37@@ -23,15 +23,7 @@ #include "mtdcore.h" -static int mtd_cls_suspend(struct device *dev, pm_message_t state); -static int mtd_cls_resume(struct device *dev); - -static struct class mtd_class = { - .name = "mtd", - .owner = THIS_MODULE, - .suspend = mtd_cls_suspend, - .resume = mtd_cls_resume, -}; +static struct class *mtd_class; /* These are exported solely for the purpose of mtd_blkdevs.c. You should not use them for _anything_ else */@@ -59,26 +51,7 @@ /* remove /dev/mtdXro node if needed */ if (index) - device_destroy(&mtd_class, index + 1); -} - -static int mtd_cls_suspend(struct device *dev, pm_message_t state) -{ - struct mtd_info *mtd = dev_to_mtd(dev); - - if (mtd->suspend) - return mtd->suspend(mtd); - else - return 0; -} - -static int mtd_cls_resume(struct device *dev) -{ - struct mtd_info *mtd = dev_to_mtd(dev); - - if (mtd->resume) - mtd->resume(mtd); - return 0; + device_destroy(mtd_class, index + 1); } static ssize_t mtd_type_show(struct device *dev,@@ -295,7 +268,7 @@ * physical device. */ mtd->dev.type = &mtd_devtype; - mtd->dev.class = &mtd_class; + mtd->dev.class = mtd_class; mtd->dev.devt = MTD_DEVT(i); dev_set_name(&mtd->dev, "mtd%d", i); if (device_register(&mtd->dev) != 0) {@@ -304,7 +277,7 @@ } if (MTD_DEVT(i)) - device_create(&mtd_class, mtd->dev.parent, + device_create(mtd_class, mtd->dev.parent, MTD_DEVT(i) + 1, NULL, "mtd%dro", i);@@ -630,12 +603,11 @@ static int __init init_mtd(void) { - int ret; - ret = class_register(&mtd_class); + mtd_class = class_create(THIS_MODULE, "mtd"); - if (ret) { - pr_err("Error registering mtd class: %d\n", ret); - return ret; + if (IS_ERR(mtd_class)) { + pr_err("Error creating mtd class.\n"); + return PTR_ERR(mtd_class); } #ifdef CONFIG_PROC_FS if ((proc_mtd = create_proc_entry( "mtd", 0, NULL )))@@ -650,7 +622,7 @@ if (proc_mtd) remove_proc_entry( "mtd", NULL); #endif /* CONFIG_PROC_FS */ - class_unregister(&mtd_class); + class_destroy(mtd_class); } module_init(init_mtd);Cheers,
cortezQuoted 141 lines · Eric Miao
Quoted 5 lines · - Cortez -
Hi,
Just tried to test suspend/resume with 2.6.31-rc3 on spitz (with charging disabled). This results in following kernel panic:
I suspect this is caused by commit
15bce40cb3133bcc07d548013df97e4653d363c1[MTD] Restore suspend/resume support for mtd devices
This is intended to suspend/resume the _chip_, while we leave board drivers to handle their own suspend/resume for the controller.
Cortez,
Could you please revert this and give another try?
Quoted 1 line
Unable to handle kernel NULL pointer dereference at virtual address00000000
Quoted 15 lines
pgd =
c0004000
[00000000] *pgd=00000000Internal error: Oops: 0 [#1] PREEMPT Modules linked in: CPU: 0 Tainted: G W (2.6.31-rc3-omegamoon-spitz #1) PC is at 0x0 LR is at 0xc39cad3c pc : [<00000000>] lr : [<c39cad3c>] psr: 60000013sp :
c3195ff8ip :c39c9f00fp :c39c9efc
r10:c03ce9b8r9 : 00000005 r8 :c39ca7b4
r7 : 00000000 r6 : 00000000 r5 :c39ca780r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 00000002 r0 : 00000000
Flags: nZCv IRQs on FIQs on ModeSVC_32ISA ARM Segment kernel
Control:0000397fTable:a1168000DAC: 00000017 Process kapmd (pid: 1426, stack limit =0xc3194278)Quoted 15 lines
Stack: (0xc3195ff8 to 0xc3196000) 5fe0: 00000000 00000000 Backtrace: [<c021f2fc>] (mtd_cls_suspend+0x0/0x30) from [<c02029e4>] (dpm_suspend_start+0x2 ac/0x444) [<c0202738>] (dpm_suspend_start+0x0/0x444) from [<c0067500>] (suspend_devices_an d_enter+0x48/0x198) [<c00674b8>] (suspend_devices_and_enter+0x0/0x198) from [<c0067704>] (enter_stat e+0xb4/0xf4) r6:c040e608 r5:00000003 r4:00000000 [<c0067650>] (enter_state+0x0/0xf4) from [<c0067768>](
pm_suspend+0x24/0x28)Quoted 7 lines
r5:c39c8000 r4:0000000a
[<c0067744>] (pm_suspend+0x0/0x28) from [<c01f6858>] (kapmd+0x174/0x1d8) [<c01f66e4>] (kapmd+0x0/0x1d8) from [<c0051284>] (kthread+0x80/0x84) [<c0051204>] (kthread+0x0/0x84) from [<c003bedc>] (do_exit+0x0/0x6dc)
r7:00000000 r6:00000000 r5:00000000 r4:00000000Code: bad PC value. Unable to handle kernel NULL pointer dereference at virtual address00000000
Quoted 34 lines
pgd =
c0004000
[00000000] *pgd=00000000Internal error: Oops: 0 [#2] PREEMPT Modules linked in: CPU: 0 Tainted: G D W (2.6.31-rc3-omegamoon-spitz #1) PC is at 0x0 LR is at 0xc39cad3c pc : [<00000000>] lr : [<c39cad3c>] psr: 60000013sp :
c39c9ef0ip :c39c9f00fp :c39c9efc
r10:c03ce9b8r9 : 00000005 r8 :c39ca7b4
r7 : 00000002 r6 : 00000000 r5 :c39ca780r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 00000002 r0 : 00000592
Flags: nZCv IRQs on FIQs on ModeSVC_32ISA ARM Segment kernel
Control:0000397fTable:a1168000DAC: 00000017 Process kapmd (pid: 307, stack limit =0xc39c8278)Stack: (0xc39c9ef0 to 0xc39ca000)9ee0:
c39c9f34c39c9f00c02029e4c021f308
9f00:c3aa64acc2e8335cc39c9f2c00000000c03e0ce800000003c39c9f84c040e5f8
9f20: 00000000c39c9f90c39c9f54c39c9f38c0067500c020274400000000 00000000
9f40: 00000003c040e608c39c9f6cc39c9f58c0067704c00674c40000000ac39c8000
9f60:c39c9f7cc39c9f70c0067768c006765cc39c9fc4c39c9f80c01f6858c0067750
9f80:c39c9fc400000000c3ad4000c005136cc39c9f90c39c9f90c39c9fc4c39c9fcc
9fa0:c3825ef800000000c01f66e400000000 00000000 00000000c39c9ff4c39c9fc8
9fc0:c0051284c01f66f000000000 00000000c39c9fd0c39c9fd000000000 00000000
9fe0: 00000000 00000000 00000000c39c9ff8c003bedcc0051210726f737374656420Quoted 12 lines
Backtrace: [<c021f2fc>] (mtd_cls_suspend+0x0/0x30) from [<c02029e4>] (dpm_suspend_start+0x2 ac/0x444) [<c0202738>] (dpm_suspend_start+0x0/0x444) from [<c0067500>] (suspend_devices_an d_enter+0x48/0x198) [<c00674b8>] (suspend_devices_and_enter+0x0/0x198) from [<c0067704>] (enter_stat e+0xb4/0xf4) r6:c040e608 r5:00000003 r4:00000000 [<c0067650>] (enter_state+0x0/0xf4) from [<c0067768>](
pm_suspend+0x24/0x28)Quoted 5 lines
r5:c39c8000 r4:0000000a
[<c0067744>] (pm_suspend+0x0/0x28) from [<c01f6858>] (kapmd+0x174/0x1d8) [<c01f66e4>] (kapmd+0x0/0x1d8) from [<c0051284>] (kthread+0x80/0x84) [<c0051204>] (kthread+0x0/0x84) from [<c003bedc>] (do_exit+0x0/0x6dc)
r7:00000000 r6:00000000 r5:00000000 r4:00000000Quoted 21 lines
Code: bad PC value. ---[ end trace 1b75b31a2719ed1e ]--- ---[ end trace 1b75b31a2719ed1f ]---Quoted 14 lines · Pavel Machek
Quoted 8 lines · Pavel Machek
Hi!
In 2.6.30, spitz suspended with PSPR fix + charging disabled.
In 2.6.31-rc1, PSPR fix is in, but suspend does not work, not even with charging disabled.
Any ideas?
Tried -rc2-git, still broken. Even pm-test=devices killed the machine, so I hope it is the IDE problem that should be fixed in -rc3.
--
(english) http://www.livejournal.com/~pavelmachek<http://www.livejournal.com/%7Epavelmachek><http://www.livejournal.com/%7Epavelmachek>
Quoted 2 lines
Quoted 2 lines
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html<http://atrey.karlin.mff.cuni.cz/%7Epavel/picture/horses/blog.html><http://atrey.karlin.mff.cuni.cz/%7Epavel/picture/horses/blog.html>
Quoted 2 lines
-------------------------------------------------------------------
List admin:http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
Quoted 2 lines
FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
Quoted 9 lines · Eric Miao
Quoted 7 lines · - Cortez -
Eric,
Thanks a lot, that worked. I hereby confirm that suspend/resume for spitz (SL-C3100) works again in 2.6.31-rc3 when reverting commit
15bce40cb3133bcc07d548013df97e4653d363c1. Apart from disabling the offline charging, which is still needed, I applied following patch:
Quoted 4 lines
David,
Could you please have a look into commit
15bce40c, which seems to cause some trouble on spitz?
That bug hit me as well, and as in Cortez' case, reverting 15bce40 fixed it for me on a PXA3xx platform.
Quoted 23 lines
Quoted 23 lines
diff -Naur
ori/drivers/mtd/mtdcore.cnew/drivers/mtd/mtdcore.cdrivers/mtd/mtdcore.c 2009-07-20 21:38:51.000000000 +0200 renamed from drivers/mtd/mtdcore.c 2009-07-13 22:26:13.000000000 +0200 +1
-9@@ -23,15 +23,7 @@ #include "mtdcore.h" -static int mtd_cls_suspend(struct device *dev, pm_message_t state); -static int mtd_cls_resume(struct device *dev); - -static struct class mtd_class = { - .name = "mtd", - .owner = THIS_MODULE, - .suspend = mtd_cls_suspend, - .resume = mtd_cls_resume, -}; +static struct class *mtd_class; /* These are exported solely for the purpose of mtd_blkdevs.c. You should not use them for _anything_ else */@@ -59,26 +51,7 @@
Quoted 14 lines
Quoted 4 lines
drivers/mtd/mtdcore.c 2009-07-20 21:38:51.000000000 +0200 renamed from drivers/mtd/mtdcore.c 2009-07-13 22:26:13.000000000 +0200 +0
-2/* remove /dev/mtdXro node if needed */ if (index) - device_destroy(&mtd_class, index + 1); -}drivers/mtd/mtdcore.c 2009-07-20 21:38:51.000000000 +0200 line 73
Quoted 10 lines
drivers/mtd/mtdcore.c 2009-07-20 21:38:51.000000000 +0200 renamed from drivers/mtd/mtdcore.c 2009-07-13 22:26:13.000000000 +0200 +0
-10- -static int mtd_cls_suspend(struct device *dev, pm_message_t state) -{ - struct mtd_info *mtd = dev_to_mtd(dev); - - if (mtd->suspend) - return mtd->suspend(mtd); - else - return 0; -}
I debugged quite a while and it looks like the mtd->suspend callback is set to some bogus address, which makes the driver jump into the nirvana from mtd_cls_suspend().
Quoted 23 lines
Quoted 23 lines
drivers/mtd/mtdcore.c 2009-07-20 21:38:51.000000000 +0200 renamed from drivers/mtd/mtdcore.c 2009-07-13 22:26:13.000000000 +0200 +2
-8-static int mtd_cls_resume(struct device *dev) -{ - struct mtd_info *mtd = dev_to_mtd(dev); - - if (mtd->resume) - mtd->resume(mtd); - return 0; + device_destroy(mtd_class, index + 1); } static ssize_t mtd_type_show(struct device *dev,@@ -295,7 +268,7 @@ * physical device. */ mtd->dev.type = &mtd_devtype; - mtd->dev.class = &mtd_class; + mtd->dev.class = mtd_class; mtd->dev.devt = MTD_DEVT(i); dev_set_name(&mtd->dev, "mtd%d", i); if (device_register(&mtd->dev) != 0) {@@ -304,7 +277,7 @@ }
Quoted 5 lines
drivers/mtd/mtdcore.c 2009-07-20 21:38:51.000000000 +0200 line 282
Quoted 5 lines
drivers/mtd/mtdcore.c 2009-07-20 21:38:51.000000000 +0200 renamed from drivers/mtd/mtdcore.c 2009-07-13 22:26:13.000000000 +0200 +1
-1if (MTD_DEVT(i)) - device_create(&mtd_class, mtd->dev.parent, + device_create(mtd_class, mtd->dev.parent, MTD_DEVT(i) + 1, NULL, "mtd%dro", i);
It also seems only related to the 'ro' devices created here. With that device_create() call removed, I couldn't reproduce anymore. That smells like a strange memory corruption, but I couldn't find the root cause for it. Can anyone else, maybe?
Daniel
Quoted 183 lines
Quoted 28 lines
drivers/mtd/mtdcore.c 2009-07-20 21:38:51.000000000 +0200 renamed from drivers/mtd/mtdcore.c 2009-07-13 22:26:13.000000000 +0200 +5
-6@@ -630,12 +603,11 @@ static int __init init_mtd(void) { - int ret; - ret = class_register(&mtd_class); + mtd_class = class_create(THIS_MODULE, "mtd"); - if (ret) { - pr_err("Error registering mtd class: %d\n", ret); - return ret; + if (IS_ERR(mtd_class)) { + pr_err("Error creating mtd class.\n"); + return PTR_ERR(mtd_class); } #ifdef CONFIG_PROC_FS if ((proc_mtd = create_proc_entry( "mtd", 0, NULL )))@@ -650,7 +622,7 @@ if (proc_mtd) remove_proc_entry( "mtd", NULL); #endif /* CONFIG_PROC_FS */ - class_unregister(&mtd_class); + class_destroy(mtd_class); } module_init(init_mtd);Quoted 147 lines
Cheers,
cortezQuoted 141 lines · Eric Miao
Quoted 5 lines · - Cortez -
Hi,
Just tried to test suspend/resume with 2.6.31-rc3 on spitz (with charging disabled). This results in following kernel panic:
I suspect this is caused by commit
15bce40cb3133bcc07d548013df97e4653d363c1[MTD] Restore suspend/resume support for mtd devices
This is intended to suspend/resume the _chip_, while we leave board drivers to handle their own suspend/resume for the controller.
Cortez,
Could you please revert this and give another try?
Quoted 1 line
Unable to handle kernel NULL pointer dereference at virtual address00000000
Quoted 15 lines
pgd =
c0004000
[00000000] *pgd=00000000Internal error: Oops: 0 [#1] PREEMPT Modules linked in: CPU: 0 Tainted: G W (2.6.31-rc3-omegamoon-spitz #1) PC is at 0x0 LR is at 0xc39cad3c pc : [<00000000>] lr : [<c39cad3c>] psr: 60000013sp :
c3195ff8ip :c39c9f00fp :c39c9efc
r10:c03ce9b8r9 : 00000005 r8 :c39ca7b4
r7 : 00000000 r6 : 00000000 r5 :c39ca780r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 00000002 r0 : 00000000
Flags: nZCv IRQs on FIQs on ModeSVC_32ISA ARM Segment kernel
Control:0000397fTable:a1168000DAC: 00000017 Process kapmd (pid: 1426, stack limit =0xc3194278)Quoted 15 lines
Stack: (0xc3195ff8 to 0xc3196000) 5fe0: 00000000 00000000 Backtrace: [<c021f2fc>] (mtd_cls_suspend+0x0/0x30) from [<c02029e4>] (dpm_suspend_start+0x2 ac/0x444) [<c0202738>] (dpm_suspend_start+0x0/0x444) from [<c0067500>] (suspend_devices_an d_enter+0x48/0x198) [<c00674b8>] (suspend_devices_and_enter+0x0/0x198) from [<c0067704>] (enter_stat e+0xb4/0xf4) r6:c040e608 r5:00000003 r4:00000000 [<c0067650>] (enter_state+0x0/0xf4) from [<c0067768>](
pm_suspend+0x24/0x28)Quoted 7 lines
r5:c39c8000 r4:0000000a
[<c0067744>] (pm_suspend+0x0/0x28) from [<c01f6858>] (kapmd+0x174/0x1d8) [<c01f66e4>] (kapmd+0x0/0x1d8) from [<c0051284>] (kthread+0x80/0x84) [<c0051204>] (kthread+0x0/0x84) from [<c003bedc>] (do_exit+0x0/0x6dc)
r7:00000000 r6:00000000 r5:00000000 r4:00000000Code: bad PC value. Unable to handle kernel NULL pointer dereference at virtual address00000000
Quoted 34 lines
pgd =
c0004000
[00000000] *pgd=00000000Internal error: Oops: 0 [#2] PREEMPT Modules linked in: CPU: 0 Tainted: G D W (2.6.31-rc3-omegamoon-spitz #1) PC is at 0x0 LR is at 0xc39cad3c pc : [<00000000>] lr : [<c39cad3c>] psr: 60000013sp :
c39c9ef0ip :c39c9f00fp :c39c9efc
r10:c03ce9b8r9 : 00000005 r8 :c39ca7b4
r7 : 00000002 r6 : 00000000 r5 :c39ca780r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 00000002 r0 : 00000592
Flags: nZCv IRQs on FIQs on ModeSVC_32ISA ARM Segment kernel
Control:0000397fTable:a1168000DAC: 00000017 Process kapmd (pid: 307, stack limit =0xc39c8278)Stack: (0xc39c9ef0 to 0xc39ca000)9ee0:
c39c9f34c39c9f00c02029e4c021f308
9f00:c3aa64acc2e8335cc39c9f2c00000000c03e0ce800000003c39c9f84c040e5f8
9f20: 00000000c39c9f90c39c9f54c39c9f38c0067500c020274400000000 00000000
9f40: 00000003c040e608c39c9f6cc39c9f58c0067704c00674c40000000ac39c8000
9f60:c39c9f7cc39c9f70c0067768c006765cc39c9fc4c39c9f80c01f6858c0067750
9f80:c39c9fc400000000c3ad4000c005136cc39c9f90c39c9f90c39c9fc4c39c9fcc
9fa0:c3825ef800000000c01f66e400000000 00000000 00000000c39c9ff4c39c9fc8
9fc0:c0051284c01f66f000000000 00000000c39c9fd0c39c9fd000000000 00000000
9fe0: 00000000 00000000 00000000c39c9ff8c003bedcc0051210726f737374656420Quoted 12 lines
Backtrace: [<c021f2fc>] (mtd_cls_suspend+0x0/0x30) from [<c02029e4>] (dpm_suspend_start+0x2 ac/0x444) [<c0202738>] (dpm_suspend_start+0x0/0x444) from [<c0067500>] (suspend_devices_an d_enter+0x48/0x198) [<c00674b8>] (suspend_devices_and_enter+0x0/0x198) from [<c0067704>] (enter_stat e+0xb4/0xf4) r6:c040e608 r5:00000003 r4:00000000 [<c0067650>] (enter_state+0x0/0xf4) from [<c0067768>](
pm_suspend+0x24/0x28)Quoted 5 lines
r5:c39c8000 r4:0000000a
[<c0067744>] (pm_suspend+0x0/0x28) from [<c01f6858>] (kapmd+0x174/0x1d8) [<c01f66e4>] (kapmd+0x0/0x1d8) from [<c0051284>] (kthread+0x80/0x84) [<c0051204>] (kthread+0x0/0x84) from [<c003bedc>] (do_exit+0x0/0x6dc)
r7:00000000 r6:00000000 r5:00000000 r4:00000000Quoted 21 lines
Code: bad PC value. ---[ end trace 1b75b31a2719ed1e ]--- ---[ end trace 1b75b31a2719ed1f ]---Quoted 14 lines · Pavel Machek
Quoted 8 lines · Pavel Machek
Hi!
In 2.6.30, spitz suspended with PSPR fix + charging disabled.
In 2.6.31-rc1, PSPR fix is in, but suspend does not work, not even with charging disabled.
Any ideas?
Tried -rc2-git, still broken. Even pm-test=devices killed the machine, so I hope it is the IDE problem that should be fixed in -rc3.
--
(english) http://www.livejournal.com/~pavelmachek<http://www.livejournal.com/%7Epavelmachek><http://www.livejournal.com/%7Epavelmachek>
Quoted 2 lines
Quoted 2 lines
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html<http://atrey.karlin.mff.cuni.cz/%7Epavel/picture/horses/blog.html><http://atrey.karlin.mff.cuni.cz/%7Epavel/picture/horses/blog.html>
Quoted 2 lines
-------------------------------------------------------------------
List admin:http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
Quoted 2 lines
FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 4 lines · Daniel Mack
That bug hit me as well, and as in Cortez' case, reverting 15bce40 fixed
it for me on a PXA3xx platform.
Can you confirm that the fix in the mtd-2.6.git tree is sufficient?
Signature · 2 lines
David Woodhouse Open Source Technology Centre [email protected] Intel Corporation
Quoted 7 lines · David Woodhouse
Quoted 4 lines · Daniel Mack
That bug hit me as well, and as in Cortez' case, reverting 15bce40 fixed
it for me on a PXA3xx platform.Can you confirm that the fix in the mtd-2.6.git tree is sufficient?
Yep, thanks!
Quoted 10 lines · Daniel Mack
Quoted 7 lines · David Woodhouse
Quoted 4 lines · Daniel Mack
That bug hit me as well, and as in Cortez' case, reverting 15bce40 fixed
it for me on a PXA3xx platform.Can you confirm that the fix in the mtd-2.6.git tree is sufficient?
Yep, thanks!
Any pointer to the fix patch, please?
Rafael
Quoted 8 lines · Rafael J. Wysocki
Quoted 7 lines · Daniel Mack
Quoted 6 lines · David Woodhouse
Quoted 4 lines · Daniel Mack
That bug hit me as well, and as in Cortez' case, reverting 15bce40 fixed
it for me on a PXA3xx platform.
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
Can you confirm that the fix in the mtd-2.6.git tree is sufficient?
Yep, thanks!
Any pointer to the fix patch, please?
I merged the whole tree from
http://git.infradead.org/?p=mtd-2.6.git;a=summary
Haven't exactly bisected which specific fix was necessary, but (6afc4f:
mtd: fix the conversion from dev to mtd_info) looks like it fixes a serious bug.
Maybe David can elaborate some more?
Daniel