Skip to contentSkip to conversation

cmi8330: find OPL3 port automatically

PATCH Superseded Ondrej Zary 1 participant 1 message Jul 6, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 cmi8330: find OPL3 port automatically

My CMI8329 had OPL3 port specified in SB16 resources. But now I found out that it was my modification of the card's PnP EEPROM a couple of years ago (can be done using C9SETROM.EXE utility). I did it because the OPL3 port was completely missing from PnP data. It seems to be hardwired to 0x388 on CMI8329.

Find OPL3 port automatically by searching in WSS and SB16 resources. If not found, assume that it's hardwired to 0x388.

--- linux-test/sound/isa/cmi8330.c 2009-07-06 21:18:06.000000000 +0200
+++ linux-2.6.30-pentium/sound/isa/cmi8330.c 2009-07-06 21:45:29.000000000
+0200
@@ -362,7 +362,7 @@
wssport[dev] = pnp_port_start(pdev, 0); wssdma[dev] = pnp_dma(pdev, 0); wssirq[dev] = pnp_irq(pdev, 0);
- if (acard->type == CMI8330)
+ if (pnp_port_start(pdev, 1))
fmport[dev] = pnp_port_start(pdev, 1);

/* allocate SB16 resources */
@@ -377,8 +377,13 @@
sbdma8[dev] = pnp_dma(pdev, 0);
sbdma16[dev] = pnp_dma(pdev, 1);
sbirq[dev] = pnp_irq(pdev, 0);
- if (acard->type == CMI8329)
- fmport[dev] = pnp_port_start(pdev, 1);
+ /* On CMI8239, the OPL3 port might be present in SB16 PnP resources */
+ if (fmport[dev] == SNDRV_AUTO_PORT) {
+ if (pnp_port_start(pdev, 1))
+ fmport[dev] = pnp_port_start(pdev, 1);
+ else
+ fmport[dev] = 0x388; /* Or hardwired */
+ }

/* allocate MPU-401 resources */
pdev = acard->mpu;

Signature · 1 line
Ondrej Zary