snd-hda-intel: fix beep tone calculation for IDT/STAC codecs
PATCH 1/1 snd-hda-intel: fix beep tone calculation for IDT/STAC codecs
In the beep tone calculation for IDT/STAC codecs, lower numbers correspond to higher frequencies and vice versa. The current code has this backwards, resulting in beep frequencies which are way too high (and sound bad on tinny laptop speakers, resulting in complaints).
sound/pci/hda/hda_beep.c +5 -4
@@ -51,19 +51,20 @@ static void snd_hda_generate_beep(struct work_struct *work)* The tone frequency of beep generator on IDT/STAC codecs is * defined from the 8bit tone parameter, in Hz, * freq = 48000 * (257 - tone) / 1024 -* that is from 12kHz to 93.75kHz in step of 46.875 hz +* that is from 12kHz to 93.75Hz in steps of 46.875 Hz */ static int beep_linear_tone (struct hda_beep *beep,int hz) { hz *=1000 ;/* fixed point */ - hz = hz -DIGBEEP_HZ_MIN ; + hz = hz -DIGBEEP_HZ_MIN + +DIGBEEP_HZ_STEP /2 ;/* round to nearest step */ if (hz <0 ) hz =0 ;/* turn off PC beep*/ else if (hz >= (DIGBEEP_HZ_MAX -DIGBEEP_HZ_MIN )) - hz =0xff ; + hz =1 ;/* max frequency */ else { hz /=DIGBEEP_HZ_STEP ; - hz++; + hz =255 - hz; }return hz; }
Takashi Iwai
AppliedAt Wed, 8 Jul 2009 23:57:46 -0700,
Quoted 7 lines · Paul Vojta
In the beep tone calculation for IDT/STAC codecs, lower numbers correspond to higher frequencies and vice versa. The current code has this backwards, resulting in beep frequencies which are way too high (and sound bad on tinny laptop speakers, resulting in complaints).
Signed-off-by Paul Vojta <[email protected]>
Thanks, applied now (with a minor modification).
Takashi
Quoted 35 lines
sound/pci/hda/hda_beep.c +5
-4@@ -51,19 +51,20 @@ static void snd_hda_generate_beep(struct work_struct *work)* The tone frequency of beep generator on IDT/STAC codecs is * defined from the 8bit tone parameter, in Hz, * freq = 48000 * (257 - tone) / 1024 -* that is from 12kHz to 93.75kHz in step of 46.875 hz +* that is from 12kHz to 93.75Hz in steps of 46.875 Hz */ static int beep_linear_tone (struct hda_beep *beep,int hz) { hz *=1000 ;/* fixed point */ - hz = hz -DIGBEEP_HZ_MIN ; + hz = hz -DIGBEEP_HZ_MIN + +DIGBEEP_HZ_STEP /2 ;/* round to nearest step */ if (hz <0 ) hz =0 ;/* turn off PC beep*/ else if (hz >= (DIGBEEP_HZ_MAX -DIGBEEP_HZ_MIN )) - hz =0xff ; + hz =1 ;/* max frequency */ else { hz /=DIGBEEP_HZ_STEP ; - hz++; + hz =255 - hz; }return hz; }_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel