Skip to contentSkip to conversation

HTC Dream: rpcrouter for staging

PATCH Pavel Machek 2 participants 2 messages Jul 10, 2009 – Jul 16, 2009 Staging

lore
Share & tools
lore
#0 lore raw

From: Brian Swetland <[email protected]>, Iliyan Malchev <[email protected]>, San Mehat <[email protected]>

rpcrouter code is neccessarry for communication with QDSP and thus many hardware components on HTC Dream, including camera hardware.

drivers/staging/dream/smd/Kconfig new file +25 -0
new file mode 100644
index 0000000..3c1db3c
@@ -0,0 +1,25 @@
+config MSM_SMD
+	default y
+	bool "MSM Shared Memory Driver (SMD)"
+	help
+	  Support for the shared memory interface between the apps
+	  processor and the baseband processor.  Provides access to
+	  the "shared heap", as well as virtual serial channels
+	  used to communicate with various services on the baseband
+	  processor.
+
+config MSM_ONCRPCROUTER
+	depends on MSM_SMD
+	default y
+	bool "MSM ONCRPC router support"
+	help
+	  Support for the MSM ONCRPC router for communication between
+	  the ARM9 and ARM11
+
+config MSM_RPCSERVERS
+	depends on MSM_ONCRPCROUTER
+	default y
+	bool "Kernel side RPC server bundle"
+	help
+	  none
+
drivers/staging/dream/smd/Makefile new file +6 -0
new file mode 100644
index 0000000..892c741
@@ -0,0 +1,6 @@
+obj-$(CONFIG_MSM_SMD) += smd.o smd_tty.o smd_qmi.o
+obj-$(CONFIG_MSM_ONCRPCROUTER) += smd_rpcrouter.o
+obj-$(CONFIG_MSM_ONCRPCROUTER) += smd_rpcrouter_device.o
+obj-$(CONFIG_MSM_ONCRPCROUTER) += smd_rpcrouter_servers.o
+obj-$(CONFIG_MSM_RPCSERVERS) += rpc_server_dog_keepalive.o
+obj-$(CONFIG_MSM_RPCSERVERS) += rpc_server_time_remote.o
drivers/staging/dream/smd/rpc_server_dog_keepalive.c new file +68 -0

68 lines not on this page · raw message

drivers/staging/dream/smd/rpc_server_time_remote.c new file +77 -0

77 lines not on this page · raw message

drivers/staging/dream/smd/smd_rpcrouter.c new file +1274 -0

1,274 lines not on this page · raw message

drivers/staging/dream/smd/smd_rpcrouter.h new file +195 -0

195 lines not on this page · raw message

drivers/staging/dream/smd/smd_rpcrouter_device.c new file +376 -0

376 lines not on this page · raw message

drivers/staging/dream/smd/smd_rpcrouter_servers.c new file +229 -0

229 lines not on this page · raw message

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#1 lore raw
Quoted 4 lines · Pavel Machek

From: Brian Swetland <[email protected]>, Iliyan Malchev <[email protected]>, San Mehat <[email protected]>

rpcrouter code is neccessarry for communication with QDSP and thus many hardware components on HTC Dream, including camera hardware.

Same problem here, no Makefile / Kconfig hooks :(

thanks,

greg k-h