Add inverted clock polarity support for Atmel LCD driver
Subsystems (3)
PATCH v2 1/3 Add inverted clock polarity support for Atmel LCD driver
This is my second try for Olimex SAM9-L9260/61 board support patches. I deleted the board ethernet initialization and hopefully will add it later in a state that can be accepted.
Here follows the first patch.
---
Boards utilizing the Atmel LCD driver can now specify that the LCD clock must be inverted by defining the macro CONFIG_ATMEL_LCD_INVCLK.
--- drivers/video/atmel_lcdfb.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
drivers/video/atmel_lcdfb.c +3 -0
@@ -112,6 +112,9 @@ void lcd_ctrl_init(void *lcdbase) value |= panel_info.vl_sync; value |= (panel_info.vl_bpix <<5 ); +#if defined(CONFIG_ATMEL_LCD_INVCLK ) + value |=ATMEL_LCDC_INVCLK_INVERTED ; +#endif lcdc_writel (panel_info.mmio,ATMEL_LCDC_LCDCON2 , value);/* Vertical timing */
Signature · 1 line
1.5.6.1
PATCH v2 2/3 Add support for Olimex SAM9-L9261 SBC
The SAM9-L9261 board support is based on code for AT91SAM9261EK. Networking is missing and will be added after the DM9000 support for AT91 boards is fixed to comply with U-Boot guide-lines.
--- MAINTAINERS | 3 + MAKEALL | 1 + Makefile | 17 +++ board/olimex/sam9_l9261/Makefile | 56 ++++++++ board/olimex/sam9_l9261/config.mk | 1 + board/olimex/sam9_l9261/led.c | 43 +++++++ board/olimex/sam9_l9261/partition.c | 40 ++++++ board/olimex/sam9_l9261/sam9_l9261.c | 214 +++++++++++++++++++++++++++++++ include/configs/sam9_l9261.h | 229 ++++++++++++++++++++++++++++++++++ tools/Makefile | 3 + tools/logos/olimex.bmp | Bin 0 -> 27510 bytes 11 files changed, 607 insertions(+), 0 deletions(-) create mode 100644 board/olimex/sam9_l9261/Makefile create mode 100644 board/olimex/sam9_l9261/config.mk create mode 100644 board/olimex/sam9_l9261/led.c create mode 100644 board/olimex/sam9_l9261/partition.c create mode 100644 board/olimex/sam9_l9261/sam9_l9261.c create mode 100644 include/configs/sam9_l9261.h create mode 100644 tools/logos/olimex.bmp
MAINTAINERS +3 -0
@@ -133,6 +133,9 @@ Jon Diekema <[email protected]> sbc8260 MPC8260 +Dimitar Dimitrov <[email protected]> + sam9_l9261 AT91SAM9261 + Dirk Eibach <[email protected]> gdppc440etx PPC440EP/GR
MAKEALL +1 -0
@@ -599,6 +599,7 @@ LIST_at91=" \ m501sk \ pm9261 \ pm9263 \ + sam9_l9261 \ " #########################################################################
Makefile +17 -0
@@ -2847,6 +2847,23 @@ at91sam9g45ekes_config : unconfig pm9263_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 +sam9_l9261_nandflash_config \ +sam9_l9261_dataflash_cs0_config \ +sam9_l9261_dataflash_cs3_config \ +sam9_l9261_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + elif [ "$(findstring dataflash_cs3,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ + else \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + fi; + @$(MKCONFIG) -a sam9_l9261 arm arm926ejs sam9_l9261 olimex at91 + ######################################################################## ## ARM Integrator boards - see doc/README-integrator for more info. integratorap_config \
board/olimex/sam9_l9261/Makefile new file +56 -0
56 lines not on this page · raw message
board/olimex/sam9_l9261/config.mk new file +1 -0
@@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000
board/olimex/sam9_l9261/led.c new file +43 -0
43 lines not on this page · raw message
board/olimex/sam9_l9261/partition.c new file +40 -0
@@ -0,0 +1,40 @@ +/* +* (C) Copyright 2008 +* Ulf Samuelsson <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +* +*/ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS ]; + +struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS ] = { + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 ,0 },/* Logical adress, CS */ + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 ,3 } +}; + +/*define the area offsets*/ +dataflash_protect_t area_list[NB_DATAFLASH_AREA ] = { + {0x00000000 ,0x000041FF ,FLAG_PROTECT_SET ,0 ,"Bootstrap" }, + {0x00004200 ,0x000083FF ,FLAG_PROTECT_CLEAR ,0 ,"Environment" }, + {0x00008400 ,0x00041FFF ,FLAG_PROTECT_SET ,0 ,"U-Boot" }, + {0x00042000 ,0x00251FFF ,FLAG_PROTECT_CLEAR ,0 ,"Kernel" }, + {0x00252000 ,0xFFFFFFFF ,FLAG_PROTECT_CLEAR ,0 ,"FS" }, +};
board/olimex/sam9_l9261/sam9_l9261.c new file +214 -0
214 lines not on this page · raw message
include/configs/sam9_l9261.h new file +229 -0
229 lines not on this page · raw message
tools/Makefile +3 -0
@@ -122,6 +122,9 @@ endif ifeq ($(VENDOR),atmel) LOGO_BMP= logos/atmel.bmp endif +ifeq ($(VENDOR),olimex) +LOGO_BMP= logos/olimex.bmp +endif ifeq ($(VENDOR),ronetix) LOGO_BMP= logos/ronetix.bmp endif
tools/logos/olimex.bmp new file binary +0 -0
zzcIJCZ{WUx`v&eCxNqRTf%^vT8 at O-a?KdF*T0)b=YX9-@<d-&{&Ua3Z9+=F((s?^8 zyY}at#?Hw%eMRNU$!Yv?jbN7BB7>Fg16;P9xx%B0%XxWu{9%Eov)&b%t90-CY&Uad z2NfTi_3?Ov%ZIzHIhvMbCA>0~AbTCFsp^rM>?=NXYn at UF$8Ud|d)BOr4Ggnc#H-mJ zW$hLQ at +m^-4Tcl#@!f#}YmH=j^1<Bq#qWbs?veRlwn%o<4d at Cnqgrf#THB%2pGav zPmoX*E52;oUTRsrOA at 1^!VqcD-AK57#+l?uvsqJ8=A@wY(-m~)z9IX{6SX+cIx-gx z+>K-hPdmAq^jd>jFofC-9-RY!5rNpePRiVvuSdBU_DqX)S*FltO&QN at Ru;!PK$s z6fq{hlmy{D?NDBYihOP)IPv6ptdlCoq!Ti=sG{$fg5Ja}X~MG#t?Uwld4IQ-j(sK# z3+O5#3rj24u7-bK$YhKvm7wdnIOiTMv*}qU<F37>PRPcWUT at h@=WK=Ttlv3JY2>d z(ndd<4DgGv9<T5nVN<#<ZDxrKW*HBW7D?cANoG;>o{dN7LAb2Wr}q}i(?5hPqO^U z4cXZJFtehmwS{GT8UVr#OTI{x>qf>El%EQ~RLh+fgjZ-#g-mj}%0$<@%*BklAA=bq zoYub><M@DMCXW<91S{HYD!~12^kWpPiQV6RZOdCMS_rJ+06=_4P+uT=p9ni)cg+| zpB(B=>3VL-xQk?&AY=)3_(bOrT>u&v at 5cRsEtf;{x;#7v at fAym%p<F61s|Od6$Toz zZv#^^3?OPqTbyYqd4q=dNY;eN8Oajr@QKbLx&Sm}-xj21oJd$MV<k9L4B0XWku#E2 zwStdMi256+rgo63l~z)YDk=fiO5u7dLgWp|N=G9{oOvTX5y-xc2Tdk+fg&)G;A%y+ z3L->~Lsr^CjyUsr3g7>DD9OgiVUSrx^&l--tf*BG+2M~`$T2kYS_-=>;5LF!JWNqD zv at 0rz6yV?~czaePA;OTAwvZ#vJbyJZf40ydKQ-4blF6pBc29|qo>Z$)Lgb8Or7h%$ zGtYf$8Uo(j8*Gd*Yy&8fh%IOg+bc9=Uf>B4hOB^h13BW%BXGswd5Y|7Mw8iFnBUc! zW6il*(eZ=I6--F7W!gdoapvg at HEibK#Th<qjM=Nzh!92{De6zA at 6lJee1amAA&Z9 zP3B&%iia at iP*JsF3Hb|Mn9VKHL91)e0uRL?j9lUbvJG9+Jz568^b0ulR8L_isn^i z#usH~7D859LXJ4|<VMnr!)y#nP@P*VR9>erw5wtULkl4*Eg?sodGa1<#$h%FC8*A= z6)LY&7&=rwgrP-{m3ELL&OCXKG~+NEgA!Ed)(Vx^DGVJdAHvWg$VxlN5oeyhh=jnK z60<$wlew2tv6Q&SPurstaFwCulf|TJ<Z98I!fOg>QzqdEf#G+HRq+TW9jH~56XrBe zj~k{PR1jxgPvN_($rHl2a%~(LoM^9RQxBNKJbn>mr5)smGjF6P0=hNOTNMwgIF7Vc zlW&NM1lOTWteC8%AmciP7#(;+oe0t~WcE22gKdqc3%7r<RD6n at VrUU$r5)smGjF6P z0=fp!WX@d>tzBVQg+pzWt%S||mijTEUOF8);>;WAiGWT9noR7%iclw+s`RM}Lu(LO z>1gDLGjF6P0=fp!WMUUmL<UJ%DNU)Mm{|x}X$d*v%p2*6fUW^Fnb-x2z(j&8m1z|e zGYcUrEg?soc_Td$&^3T26T7G)E|m(_f_fE1h#ZHkw1pgT=8d!r=&zn^j2s3TDGaR? z!G)w|LC^``<<DX|fqz>>I2$}qgK>YM_eyGUBhe?eB1DcuRx*>%ffyZlO~LNUM3liN z9;R0WP1%9e^i5uKfql{mLKcCL$oF16F!-kSW86hj6TPKoR at hXu((pEt6(h?dODOY1 z4m<Pc?IlLx)psMK^eHpd5FtVS6ly**#t;i2FRRciBSt6lkkZEiW>JAn3azD(Z6ZLb z9Id_z3oM&V1z8}6n|QE{(hgj;=-PV<UlmGAY0^XphrtAC4^uRx%_SvQEPhgq)3bS5 z>-5V_9AM1I#RnV5ARaVsH7eQrA>-&-HR(3QvKxXacEAJlb%}Z9L(}pcJMk3WvPB zj~~$1GP^yKbYoF*caDfnXEWJE)F+?ZBF-Tusyb2^DbM^h1?VEkhzr5KT|lE+ at g@} zp(&ek5y5ApF}wg>=M$_Fg0CdxQ1S2u=h-dLgV*^WU3Y+e)b$l7KpcIoERmI{<JNu z!1zOgQ3beCiViP4ccmD-6yFFs;ZnbbeVr==X$3EX9LRxFu5u1ct(e067#<E|I;) z&un26p^lR>!r8nOM4p^gTG;G4J0l^Pk<F_%$eTomcNHaNnKFY#A8kjBQrNFNew1f ze8*U*0&TX=OhjlAQ)U=B5$dqCeNI?gs;@ZBbZoFA4IRT_)Pl$7mJMOmkA8PtJ%<9; zTNOHeHgyi*#mAJ_+>b(FA0q)g+ngF+nn)`vm75Hba-H at eItebee*xs_S%cMLtZPt zfwud;VbFV4%^}}&BR8A(b<vlzq(gq_p|J0VZhLXFb;^sa8^3ShzJdD&?i;vo;Dc}A w)2B!K=P|#1 at ZMkgcI|4~#f<-b=|}zW^Q~*?AD#Ql-GKat8c&zqOTB@A01O0K1ONa4
literal 0
HcmV?d00001
Signature · 1 line
1.5.6.1
PATCH v2 3/3 Add support for Olimex SAM9-L9260 SBC
In reply to Dimitar DimitrovThe SAM9-L9260 board support is based on code for AT91SAM9260EK. Networking is missing and will be added after the MACB support for AT91 boards is fixed to comply with U-Boot guide-lines.
--- MAINTAINERS | 1 + Makefile | 17 +++ board/olimex/sam9_l9260/Makefile | 56 +++++++++ board/olimex/sam9_l9260/config.mk | 1 + board/olimex/sam9_l9260/led.c | 41 +++++++ board/olimex/sam9_l9260/partition.c | 40 +++++++ board/olimex/sam9_l9260/sam9_l9260.c | 111 ++++++++++++++++++ include/configs/sam9_l9260.h | 214 ++++++++++++++++++++++++++++++++++ 8 files changed, 481 insertions(+), 0 deletions(-) create mode 100644 board/olimex/sam9_l9260/Makefile create mode 100644 board/olimex/sam9_l9260/config.mk create mode 100644 board/olimex/sam9_l9260/led.c create mode 100644 board/olimex/sam9_l9260/partition.c create mode 100644 board/olimex/sam9_l9260/sam9_l9260.c create mode 100644 include/configs/sam9_l9260.h
MAINTAINERS +1 -0
@@ -134,6 +134,7 @@ Jon Diekema <[email protected]> sbc8260 MPC8260 Dimitar Dimitrov <[email protected]> + sam9_l9260 AT91SAM9260 sam9_l9261 AT91SAM9261 Dirk Eibach <[email protected]>
Makefile +17 -0
@@ -2847,6 +2847,23 @@ at91sam9g45ekes_config : unconfig pm9263_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 +sam9_l9260_nandflash_config \ +sam9_l9260_dataflash_cs0_config \ +sam9_l9260_dataflash_cs1_config \ +sam9_l9260_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + else \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ + fi; + @$(MKCONFIG) -a sam9_l9260 arm arm926ejs sam9_l9260 olimex at91 + sam9_l9261_nandflash_config \ sam9_l9261_dataflash_cs0_config \ sam9_l9261_dataflash_cs3_config \
board/olimex/sam9_l9260/Makefile new file +56 -0
56 lines not on this page · raw message
board/olimex/sam9_l9260/config.mk new file +1 -0
@@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000
board/olimex/sam9_l9260/led.c new file +41 -0
41 lines not on this page · raw message
board/olimex/sam9_l9260/partition.c new file +40 -0
@@ -0,0 +1,40 @@ +/* +* (C) Copyright 2008 +* Ulf Samuelsson <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +* +*/ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS ]; + +struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS ] = { + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 ,0 },/* Logical adress, CS */ + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 ,1 } +}; + +/*define the area offsets*/ +dataflash_protect_t area_list[NB_DATAFLASH_AREA ] = { + {0x00000000 ,0x000041FF ,FLAG_PROTECT_SET ,0 ,"Bootstrap" }, + {0x00004200 ,0x000083FF ,FLAG_PROTECT_CLEAR ,0 ,"Environment" }, + {0x00008400 ,0x00041FFF ,FLAG_PROTECT_SET ,0 ,"U-Boot" }, + {0x00042000 ,0x00251FFF ,FLAG_PROTECT_CLEAR ,0 ,"Kernel" }, + {0x00252000 ,0xFFFFFFFF ,FLAG_PROTECT_CLEAR ,0 ,"FS" }, +};
board/olimex/sam9_l9260/sam9_l9260.c new file +111 -0
111 lines not on this page · raw message
include/configs/sam9_l9260.h new file +214 -0
214 lines not on this page · raw message
Signature · 1 line
1.5.6.1
PATCH v2 1/3 Add inverted clock polarity support for Atmel LCD driver
In reply to Dimitar DimitrovDear Dimitar Dimitrov,
Quoted 20 lines · In message <[email protected]> you wrote:
This is my second try for Olimex SAM9-L9260/61 board support patches. I deleted the board ethernet initialization and hopefully will add it later in a state that can be accepted.
Here follows the first patch.
---Boards utilizing the Atmel LCD driver can now specify that the LCD clock must be inverted by defining the macro
CONFIG_ATMEL_LCD_INVCLK.Signed-off-by Dimitar Dimitrov <[email protected]>--- drivers/video/atmel_lcdfb.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)drivers/video/atmel_lcdfb.c +0
-0
drivers/video/atmel_lcdfb.c void lcd_ctrl_init(void *lcdbase) · line 117
Quoted 6 lines
drivers/video/atmel_lcdfb.c +3
-0@@ -112,6 +112,9 @@ void lcd_ctrl_init(void *lcdbase) value |= panel_info.vl_sync; value |= (panel_info.vl_bpix <<5 ); +#if defined(CONFIG_ATMEL_LCD_INVCLK ) + value |=ATMEL_LCDC_INVCLK_INVERTED ; +#endif
Please remove the "ATMEL_" part from the #define. The feature might be interesting for other processors / systems as well.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Q: What do you get when you cross an ethernet with an income statement? A: A local area networth.
PATCH v2 2/3 Add support for Olimex SAM9-L9261 SBC
In reply to Dimitar DimitrovDear Tom,
Quoted 7 lines · In message <[email protected]> Dimitar Dimitrov wrote:
The SAM9-L9261 board support is based on code for AT91SAM9261EK. Networking is missing and will be added after the DM9000 support for AT91 boards is fixed to comply with U-Boot guide-lines.
Signed-off-by Dimitar Dimitrov <[email protected]>---
In lack of a AT91 custodian, could you please check the status of this patch and the next one in this series:
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/63723/focus=63724
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/63723/focus=63725
Thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Egotist: A person of low taste, more interested in himself than in me. - Ambrose Bierce