driver for 041e:4055 Creative Technology, Ltd Live! Cam Video IM
Actually, according to http://linux-uvc.berlios.de/ , you can just try 'USB Video Class' Driver, i.e. Device Drivers -> Multimedia Devices -> Video Capture Adapters -> V4L USB Devices -> (M) USB Video Class (UVC) & (y) UVC input events device support
(CONFIG_USB_VIDEO_CLASS=m & USB_VIDEO_CLASS_INPUT_EVDEV=y).
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
thanks denis,
after following these steps it worked me to detect
device but not to read or get picture from device. it is giving error as usb 5-5: new high speed USB device using ehci_hcd and address 3 usb 5-5: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
gspca: main v2.7.0 registered
gspca: probing 041e:4055
zc3xx: Sensor Tas5130 (VF0250)
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registered
usb 5-5: USB disconnect, address 3
gspca: usb_submit_urb alt 2 err -19
gspca: disconnect complete
gspca: open failed err -19
gspca: open failed err -19
what this error means ..i think problem in
device driver it is not able to open device..how to resolve this error???
Quoted 7 lines · Denis Loginov
Actually, according to http://linux-uvc.berlios.de/ , you can just try 'USB
Video Class' Driver, i.e. Device Drivers -> Multimedia Devices -> Video Capture Adapters -> V4L USB Devices -> (M) USB Video Class (UVC) & (y) UVC input events device support
(CONFIG_USB_VIDEO_CLASS=m& USB_VIDEO_CLASS_INPUT_EVDEV=y).
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 21 lines · On Fri, 31 Jul 2009 09:54:19 +0530 amol verule <[email protected]> wrote:
thanks denis,
after following these steps it worked me to
detect device but not to read or get picture from device. it is giving error as usb 5-5: new high speed USB device usingehci_hcdand address 3 usb 5-5: configuration #1 chosen from 1 choice Linux video capture interface: v2.00
gspca: main v2.7.0 registered
gspca: probing 041e:4055
zc3xx: Sensor Tas5130 (VF0250)
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registered
usb 5-5: USB disconnect, address 3
gspca:usb_submit_urbalt 2 err -19
gspca: disconnect complete
gspca: open failed err -19
gspca: open failed err -19
what this error means ..i think
problem in device driver it is not able to open device..how to resolve this error???
Quoted 9 lines
Quoted 6 lines · Denis Loginov
Actually, according to http://linux-uvc.berlios.de/ , you can just try 'USB
Video Class' Driver, i.e. Device Drivers -> Multimedia Devices -> Video Capture Adapters -> V4L USB Devices -> (M) USB Video Class (UVC) & (y) UVC input events device support (CONFIG_USB_VIDEO_CLASS=m& USB_VIDEO_CLASS_INPUT_EVDEV=y).
Hello Amol and Denis,
This webcam is not handled by gspca (it is VF0230, and not VF0250).
I already got a usbsnoop and I may say that it if not UVC compliant too.
With the usbsnoop and the register names in the V0230Dev.inf of the ms-win driver, it should be easy to create a new driver, but:
- it seems it asks for a firmware which may be copyrighted,
- the images are compressed and the encoding is not known...
BTW, the linux video stuff is now discussed in the linux-media mailing list (see Cc:).
Best regards.
Signature · 2 lines
Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/
Hello Amol,
Looking back in my mails, I found that the driver for your webcam is 'm5603c'. It has been written and ported to gspca v2 by Franck Bourdonnec (hello Franck!), but it is not yet integrated in the kernel.
Looking at the m560x project at sourceforge, it seems that nothing happended since many months. So, I don't know if the driver works. Here are the source files:
http://m560x-driver.svn.sourceforge.net/viewvc/m560x-driver/
Best regards.
Signature · 2 lines
Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/