v2009.08-rc1 is out
Hi everybody...
v2009.08-rc1 has just been released.
Please help testing, and submit fixes to the remaining problems. Things still missing should be submitted ASAP.
v2009.08-rc1 will also be the base for the "next" branch which I will create soon.
Please use the "next" branch as base for any new work. Note: Please keep in mind that it may be rebased against master every now and then without warning, but I will usually try to avoid this.
Summary of current status:
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use CONFIG_NET_MULTI
messages.
* ARM (as far as present [see below]) shows this:
===== actux4 =====
actux4.c: In function 'board_init':
actux4.c:83: warning: left shift count >= width of type
actux4.c:83: warning: left shift count >= width of type
===== mv88f6281gtw_ge =====
mv88e61xx.c: In function 'mv88e61xx_switch_initialize':
mv88e61xx.c:346: warning: 'idstr' may be used uninitialized in this function ===== rd6281a =====
mv88e61xx.c: In function 'mv88e61xx_busychk_multic':
mv88e61xx.c:46: warning: passing argument 4 of 'miiphy_read' from incompatible pointer type mv88e61xx.c: In function 'mv88e61xx_wr_phy':
mv88e61xx.c:61: warning: passing argument 4 of 'miiphy_read' from incompatible pointer type mv88e61xx.c:57: warning: unused variable 'reg'
mv88e61xx.c: In function 'mv88e61xx_rd_phy':
mv88e61xx.c:80: warning: passing argument 4 of 'miiphy_read' from incompatible pointer type mv88e61xx.c:76: warning: unused variable 'reg'
mv88e61xx.c: In function 'mv88e61xx_switch_initialize':
mv88e61xx.c:346: warning: 'idstr' may be used uninitialized in this function nand_util.c:45:2: warning: #warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output! ===== sheevaplug =====
nand_util.c:45:2: warning: #warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output!
* ARM:
many things missing, still waiting for pull request from Jean-Christophe
[U-Boot] smc91111 net_multi update
Quoted 6 lines · On Monday 27 July 2009 05:26:07 Wolfgang Denk wrote:
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use
CONFIG_NET_MULTImessages.
i see this on a bunch of Blackfin boards all due to the SMC91111 driver. do you have any immediate/midterm plans to port this driver Ben ? i'm assuming the SMC911X driver doesnt support all the parts that the SMC91111 driver does, so simply jumping away to the SMC911X driver isnt an option ...
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090727/e8e23dcb/attachment.pgp
[U-Boot] smc91111 net_multi update
Hi Mike,
Quoted 7 lines · Mike Frysinger
Quoted 5 lines · On Monday 27 July 2009 05:26:07 Wolfgang Denk wrote:
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use
CONFIG_NET_MULTI
Quoted 9 lines
Quoted 2 lines
messages.
i see this on a bunch of Blackfin boards all due to the SMC91111 driver. do you have any immediate/midterm plans to port this driver Ben ? i'm assuming the SMC911X driver doesnt support all the parts that the SMC91111 driver does, so simply jumping away to the SMC911X driver isnt an option ... -mike
I have it completely ported, and plan to post it as soon as I get a chance. The only thing left to do is port all of the eeprom.c standalone apps (I have one done already so the others shouldn't take much time).
regards,
Ben
[U-Boot] smc91111 net_multi update
Quoted 15 lines · On Monday 27 July 2009 14:11:21 Ben Warren wrote:
Quoted 6 lines · Mike Frysinger
Quoted 5 lines · On Monday 27 July 2009 05:26:07 Wolfgang Denk wrote:
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use
CONFIG_NET_MULTIQuoted 7 lines
Quoted 1 line
messages.
i see this on a bunch of Blackfin boards all due to the SMC91111 driver. do you have any immediate/midterm plans to port this driver Ben ? i'm assuming the SMC911X driver doesnt support all the parts that the SMC91111 driver does, so simply jumping away to the SMC911X driver isnt an option ...
Quoted 4 lines
I have it completely ported, and plan to post it as soon as I get a chance. The only thing left to do is port all of the
eeprom.cstandalone apps (I have one done already so the others shouldn't take much time).
ok, that means i dont have to do any work. thanks :)
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090727/d2a5d2f4/attachment.pgp
[U-Boot] smc91111 net_multi update
Quoted 19 lines · Mike Frysinger
Quoted 17 lines · On Monday 27 July 2009 14:11:21 Ben Warren wrote:
Quoted 15 lines · Mike Frysinger
Quoted 7 lines · On Monday 27 July 2009 05:26:07 Wolfgang Denk wrote:
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use
CONFIG_NET_MULTImessages.
i see this on a bunch of Blackfin boards all due to the SMC91111 driver. do you have any immediate/midterm plans to port this driver Ben ? i'm assuming the SMC911X driver doesnt support all the parts that the SMC91111 driver does, so simply jumping away to the SMC911X driver isnt an option ...
Quoted 9 lines
Quoted 5 lines
I have it completely ported, and plan to post it as soon as I get a chance. The only thing left to do is port all of the
eeprom.cstandalone apps (I have one done already so the others shouldn't take much time).ok, that means i dont have to do any work. thanks :) -mike
Only if testing isn't work for you. ;)
Ben
[U-Boot] smc91111 net_multi update
Quoted 17 lines · On Monday 27 July 2009 14:30:05 Ben Warren wrote:
Quoted 16 lines · Mike Frysinger
Quoted 15 lines · On Monday 27 July 2009 14:11:21 Ben Warren wrote:
Quoted 13 lines · Mike Frysinger
Quoted 6 lines · On Monday 27 July 2009 05:26:07 Wolfgang Denk wrote:
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use
CONFIG_NET_MULTImessages.
i see this on a bunch of Blackfin boards all due to the SMC91111 driver. do you have any immediate/midterm plans to port this driver Ben ? i'm assuming the SMC911X driver doesnt support all the parts that the SMC91111 driver does, so simply jumping away to the SMC911X driver isnt an option ...
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
I have it completely ported, and plan to post it as soon as I get a chance. The only thing left to do is port all of the
eeprom.cstandalone apps (I have one done already so the others shouldn't take much time).ok, that means i dont have to do any work. thanks :)
Only if testing isn't work for you. ;)
it isnt really. i'm taking off for a week or two though, so i wont be able to test until i get back (assuming you post before that).
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090727/ba8d9efc/attachment.pgp
[U-Boot] smc91111 net_multi update
In reply to Ben WarrenQuoted 19 lines · Ben Warren
Hi Mike,
Quoted 7 lines · Mike Frysinger
Quoted 5 lines · On Monday 27 July 2009 05:26:07 Wolfgang Denk wrote:
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use
CONFIG_NET_MULTIQuoted 9 lines
Quoted 2 lines
messages.
i see this on a bunch of Blackfin boards all due to the SMC91111 driver. do you have any immediate/midterm plans to port this driver Ben ? i'm assuming the SMC911X driver doesnt support all the parts that the SMC91111 driver does, so simply jumping away to the SMC911X driver isnt an option ... -mike
Quoted 5 lines
I have it completely ported, and plan to post it as soon as I get a chance. The only thing left to do is port all of the
eeprom.cstandalone apps (I have one done already so the others shouldn't take much time).
I've also done it and the eeprom is working
I'll post it later today wish 2 other patch for net
Best Regards,
J.
Paulraj
[U-Boot] Compilation erros while trying at compile ARM DaVinci
I get the following compilation errors when I try to compile DaVinci DM355 on the latest U-Boot source. I thought I saw similar issues on the mailing list some time back. Have these been resolved?
3.2/libgcc.a(_udivsi3.o) has EABI version 5, but target u-boot has EABI version 0
arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_udivsi3.o)
arm-none-linux-gnueabi-ld: ERROR: Source object /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_divsi3.o) has EABI version 5, but target u-boot has EABI version 0
arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_divsi3.o)
arm-none-linux-gnueabi-ld: ERROR: Source object /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_umodsi3.o) has EABI version 5, but target u-boot has EABI version 0
arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_umodsi3.o)
arm-none-linux-gnueabi-ld: ERROR: Source object /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_modsi3.o) has EABI version 5, but target u-boot has EABI version 0
arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_modsi3.o)
arm-none-linux-gnueabi-ld: ERROR: Source object /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_dvmd_lnx.o) has EABI version 5, but target u-boot has EABI version 0
arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_dvmd_lnx.o) /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_dvmd_lnx.o): In function `__aeabi_ldiv0':
(.text+0x8): undefined reference to `raise
Thanks,
Sandeep
[U-Boot] Compilation erros while trying at compile ARM DaVinci
Hi,
aulraj, Sandeep a ?crit :
Quoted 16 lines
I get the following compilation errors when I try to compile DaVinci DM355 on the latest U-Boot source. I thought I saw similar issues on the mailing list some time back. Have these been resolved?
3.2/libgcc.a(_udivsi3.o) has EABI version 5, but target u-boot has EABI version 0
arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_udivsi3.o)
arm-none-linux-gnueabi-ld: ERROR: Source object /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_divsi3.o) has EABI version 5, but target u-boot has EABI version 0
arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_divsi3.o)
arm-none-linux-gnueabi-ld: ERROR: Source object /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_umodsi3.o) has EABI version 5, but target u-boot has EABI version 0
arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_umodsi3.o)
arm-none-linux-gnueabi-ld: ERROR: Source object /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_modsi3.o) has EABI version 5, but target u-boot has EABI version 0
arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_modsi3.o)
arm-none-linux-gnueabi-ld: ERROR: Source object /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_dvmd_lnx.o) has EABI version 5, but target u-boot has EABI version 0
arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_dvmd_lnx.o) /opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_dvmd_lnx.o): In function `__aeabi_ldiv0':
(.text+0x8): undefined reference to `raise
try to add USE_PRIVATE_LIBGCC=yes to you make commande.
Eric
Paulraj
[U-Boot] Compilation erros while trying at compile ARM DaVinci
Quoted 48 lines
-----Original Message-----
From: Eric B?nard [mailto:eric at eukrea.com]
Sent: Monday, August 10, 2009 11:26 AM
To: Paulraj, Sandeep
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] Compilation erros while trying at compile ARM DaVinciHi,
aulraj, Sandeep a ?crit :
Quoted 1 line
I get the following compilation errors when I try to compile DaVinci
DM355 on the latest U-Boot source. I thought I saw similar issues on the mailing list some time back. Have these been resolved?
Quoted 3 lines
3.2/libgcc.a(_udivsi3.o) has EABI version 5, but target u-boot has EABI
version 0
Quoted 1 line
arm-none-linux-gnueabi-ld: failed to merge target specific data of file
/opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_udivsi3.o)Quoted 1 line
arm-none-linux-gnueabi-ld: ERROR: Source object
/opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_divsi3.o) has EABI version 5, but target u-boot has EABI version 0Quoted 1 line
arm-none-linux-gnueabi-ld: failed to merge target specific data of file
/opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_divsi3.o)Quoted 1 line
arm-none-linux-gnueabi-ld: ERROR: Source object
/opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_umodsi3.o) has EABI version 5, but target u-boot has EABI version 0Quoted 1 line
arm-none-linux-gnueabi-ld: failed to merge target specific data of file
/opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_umodsi3.o)Quoted 1 line
arm-none-linux-gnueabi-ld: ERROR: Source object
/opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_modsi3.o) has EABI version 5, but target u-boot has EABI version 0Quoted 1 line
arm-none-linux-gnueabi-ld: failed to merge target specific data of file
/opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_modsi3.o)Quoted 1 line
arm-none-linux-gnueabi-ld: ERROR: Source object
/opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_dvmd_lnx.o) has EABI version 5, but target u-boot has EABI version 0
Quoted 8 lines
Quoted 1 line
arm-none-linux-gnueabi-ld: failed to merge target specific data of file
/opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_dvmd_lnx.o)Quoted 1 line
/opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/libgcc.a(_dvmd_lnx.o): In function `__aeabi_ldiv0':
Quoted 2 lines
(.text+0x8): undefined reference to `raise
try to add USE_PRIVATE_LIBGCC=yes to you make commande.
[Sandeep] It compiles. Is this some kind of a permanent solution? I see lots of e-mails on arm not including libgcc.
Quoted 2 lines
Eric
[U-Boot] Compilation erros while trying at compile ARM DaVinci
Hi Sandeep,
Quoted 3 lines
Quoted 1 line
try to add USE_PRIVATE_LIBGCC=yes to you make commande.
[Sandeep] It compiles. Is this some kind of a permanent solution? I see lots of e-mails on arm not including libgcc.
It should not be a permanent solution. It is need however as long as
a) ARM on U-Boot forces the ABI to be compiled for to be "-mabi=apcs-gnu" (check cpu/arm*/config.mk) in contrast to the newer GNUEABI
and
b) your toolchain does not have a libgcc compiled for this ABI version (true for recent toolchains which use the newer GNUEABI.
This is my take on the situation. I lost track however why a) is the case. Maybe someone can help my memory here.
Cheers
Detlev
Signature · 8 lines
The mathematician's patterns, like the painter's or the poet's, must be beautiful; the ideas, like the colours or the words, must fit together in a harmonious way. Beauty is the first test: there is no permanent place in the world for ugly mathematics. -- G. H. Hardy -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
[U-Boot] smc91111 net_multi update
In reply to Jean-Christophe PLAGNIOL-VILLARDQuoted 30 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 22 lines · Ben Warren
Hi Mike,
Quoted 8 lines · Mike Frysinger
Quoted 5 lines · On Monday 27 July 2009 05:26:07 Wolfgang Denk wrote:
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use
CONFIG_NET_MULTIQuoted 10 lines
Quoted 3 lines
messages.
i see this on a bunch of Blackfin boards all due to the SMC91111 driver. do you have any immediate/midterm plans to port this driver Ben ? i'm assuming the SMC911X driver doesnt support all the parts that the SMC91111 driver does, so simply jumping away to the SMC911X driver isnt an option ... -mike
Quoted 6 lines
I have it completely ported, and plan to post it as soon as I get a chance. The only thing left to do is port all of the
eeprom.cstandalone apps (I have one done already so the others shouldn't take much time).
Quoted 7 lines
I've also done it and the eeprom is working
I'll post it later today wish 2 other patch for net
Best Regards,
J.
What are you planning on posting? It looks to me like you say it works OK.
Ben
[U-Boot] [STATUS] v2009.08-rc2 is out
In reply to Wolfgang DenkHi everybody...
v2009.08-rc2 has just been released.
Please help testing, and submit fixes to the remaining problems. Things still missing should be submitted ASAP.
v2009.08-rc2 is also be the base for the "next" branch which I just created (still empty so far).
Please use the "next" branch as base for any new work. Note: Please keep in mind that it may be rebased against master every now and then without warning, but I will usually try to avoid this.
Summary of current status:
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use CONFIG_NET_MULTI
messages.
* ARM and PowerPC: mostly compile clean; there are a few issues, responsible s have been notified
Biggest problem area for me is curtrently ARM, where I lose more time trying to moderate patch submissions than I can spend on actually working on code. We need to overcome this situation ASAP.
Comments and ideas welcome.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Chapter 1 -- The story so far: In the beginning the Universe was created. This has made a lot of people very angry and been widely regarded as a bad move.
[U-Boot] [STATUS] v2009.08-rc2 is out
Quoted 17 lines · Wolfgang Denk
Hi everybody...
v2009.08-rc2 has just been released.
Please help testing, and submit fixes to the remaining problems. Things still missing should be submitted ASAP.
v2009.08-rc2 is also be the base for the "next" branch which I just created (still empty so far).
Please use the "next" branch as base for any new work. Note: Please keep in mind that it may be rebased against master every now and then without warning, but I will usually try to avoid this.
Summary of current status:
Quoted 8 lines
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use
CONFIG_NET_MULTImessages.
* ARM and PowerPC: mostly compile clean; there are a few issues, responsible s have been notified
nearly all ppc have warning with gcc 4
and a lots of them fail to build
Quoted 6 lines
Biggest problem area for me is curtrently ARM, where I lose more time trying to moderate patch submissions than I can spend on actually working on code. We need to overcome this situation ASAP.
Comments and ideas welcome
yes please let me manage the ARM myself
and please pull my patch I do known what I do on ARM very well
Best Regards,
J.
[U-Boot] [STATUS] v2009.08-rc2 is out
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 5 lines · In message <[email protected]> you wrote:
Quoted 3 lines
* ARM and PowerPC: mostly compile clean; there are a few issues, responsible s have been notified
nearly all ppc have warning with gcc 4
and a lots of them fail to build
I built all PowerPC boards with ELDK 4.0 (gcc4.0.0), ELDK 4.1 (gcc 4.0.0) and ELDK 4.2 (gcc 4.2.2). Not a sinlge board failed, and only very few had unexpected warnings (I consider the "#warning Ethernet driver is deprecated. Please update to use CONFIG_NET_MULT" warning to be an expected one - and even this affects only 1 or 2 PowerPC boards - but about every ARM board).
So could you *please* start providing clear facts? Which board do you claim to fail to build? Which exact tool chain are you using? And what are the exact error messages?
D*mn... I'm asking you these very same questions for at least the 4th time in the last 2 or 3 days.
Please provide FACTS.
Quoted 3 lines
Quoted 1 line
Comments and ideas welcome
yes please let me manage the ARM myself
and please pull my patch I do known what I do on ARM very well
Even as a custodian you are supposed to accept that you do not have unlimited power.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Der Horizont vieler Menschen ist ein Kreis mit Radius Null -- und das nennen sie ihren Standpunkt.
[U-Boot] [STATUS] v2009.08-rc2 is out
In reply to Wolfgang DenkQuoted 7 lines · Wolfgang Denk
Summary of current status:
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use
CONFIG_NET_MULTImessages.
I found qemu_mips_config is spotted by it:
Configuring for qemu-mips board...
eth.c:497:2: warning: #warning Ethernet driver is deprecated. Please update to use CONFIG_NET_MULTI
But I don't follow the recent changes including that CONFIG_NET_MULTI migration, nor I don't have enough spare time to look into it, so gave up this time, sorry.
Quoted 2 lines
* ARM and PowerPC: mostly compile clean; there are a few issues, responsible s have been notified
For the rest, MIPS builds are pretty in good shape as follows.
skuribay at ubuntu:u-boot.git$ ./MAKEALL mips mips_el
Configuring for incaip board...
text data bss dec hex filename
147032 6476 20240 173748 2a6b4 ./u-boot
Configuring for qemu-mips board...
eth.c:497:2: warning: #warning Ethernet driver is deprecated. Please update to use CONFIG_NET_MULTI
text data bss dec hex filename
171744 6340 221768 399852 619ec ./u-boot
... on Platinum board variant
Configuring for vct board...
text data bss dec hex filename
199916 12568 284420 496904 79508 ./u-boot
... on Platinum board variant
... stripped down image variant
Configuring for vct board...
text data bss dec hex filename
88296 4196 13716 106208 19ee0 ./u-boot
... on Platinum board variant
... on OneNAND board variant
Configuring for vct board...
text data bss dec hex filename
296608 13728 289764 600100 92824 ./u-boot
... on Platinum board variant
... on OneNAND board variant
... stripped down image variant
Configuring for vct board...
text data bss dec hex filename
184016 5344 19080 208440 32e38 ./u-boot
... on PlatinumAVC board variant
Configuring for vct board...
text data bss dec hex filename
118508 5112 14944 138564 21d44 ./u-boot
... on PlatinumAVC board variant
... stripped down image variant
Configuring for vct board...
text data bss dec hex filename
87816 4196 13716 105728 19d00 ./u-boot
... on PlatinumAVC board variant
... on OneNAND board variant
Configuring for vct board...
text data bss dec hex filename
215264 6268 20308 241840 3b0b0 ./u-boot
... on PlatinumAVC board variant
... on OneNAND board variant
... stripped down image variant
Configuring for vct board...
text data bss dec hex filename
183528 5344 19080 207952 32c50 ./u-boot
... on Premium board variant
Configuring for vct board...
text data bss dec hex filename
199916 12568 284420 496904 79508 ./u-boot
... on Premium board variant
... stripped down image variant
Configuring for vct board...
text data bss dec hex filename
88296 4196 13716 106208 19ee0 ./u-boot
... on Premium board variant
... on OneNAND board variant
Configuring for vct board...
text data bss dec hex filename
296608 13728 289764 600100 92824 ./u-boot
... on Premium board variant
... on OneNAND board variant
... stripped down image variant
Configuring for vct board...
text data bss dec hex filename
184016 5344 19080 208440 32e38 ./u-boot
Configuring for purple board...
text data bss dec hex filename
147688 6168 18956 172812 2a30c ./u-boot
Configuring for dbau1x00 board...
text data bss dec hex filename
120928 5172 20680 146780 23d5c ./u-boot
Configuring for dbau1x00 board...
text data bss dec hex filename
120928 5172 20680 146780 23d5c ./u-boot
Configuring for dbau1x00 board...
text data bss dec hex filename
120928 5172 20680 146780 23d5c ./u-boot
Configuring for dbau1x00 board...
text data bss dec hex filename
116936 5256 23352 145544 23888 ./u-boot
Configuring for dbau1x00 board...
text data bss dec hex filename
116936 5256 23352 145544 23888 ./u-boot
Configuring for gth2 board...
text data bss dec hex filename
111656 5140 18376 135172 21004 ./u-boot
Configuring for dbau1x00 board...
text data bss dec hex filename
116936 5256 23352 145544 23888 ./u-boot
Configuring for pb1x00 board...
text data bss dec hex filename
106460 6004 20488 132952 20758 ./u-boot
skuribay at ubuntu:u-boot.git$
skuribay at ubuntu:u-boot.git$
skuribay at ubuntu:u-boot.git$ mips-linux-gnu-gcc --version
mips-linux-gnu-gcc (Sourcery G++ Lite 4.3-154) 4.3.3
Copyright (C) 2008 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
skuribay at ubuntu:u-boot.git$ mips-linux-gnu-as --version GNU assembler (Sourcery G++ Lite 4.3-154) 2.19.51.20090205 Copyright 2008 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of the GNU General Public License version 3 or later.
This program has absolutely no warranty.
This assembler was configured for a target of `mips-linux-gnu'. skuribay at ubuntu:u-boot.git$
[U-Boot] [STATUS] v2009.08-rc2 is out
Hi Shinya,
Quoted 11 lines · Shinya Kuribayashi
Quoted 8 lines · Wolfgang Denk
Summary of current status:
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use
CONFIG_NET_MULTImessages.
Quoted 9 lines
I found
qemu_mips_configis spotted by it:
Configuring for qemu-mips board...
eth.c:497:2: warning: #warning Ethernet driver is deprecated. Please update to useCONFIG_NET_MULTIBut I don't follow the recent changes including that
CONFIG_NET_MULTImigration, nor I don't have enough spare time to look into it, so gave up this time, sorry.
The DM9000 driver uses the old networking API, and needs to be updated. I have it partly done and will be submitting to the ML soon. Hopefully you'll be able to test my patch :)
regards,
Ben
[U-Boot] [STATUS] v2009.08-rc2 is out
Hi,
Quoted 5 lines · Ben Warren
Quoted 5 lines
I found
qemu_mips_configis spotted by it:
Configuring for qemu-mips board...
eth.c:497:2: warning: #warning Ethernet driver is deprecated. Please update to useCONFIG_NET_MULTI
Quoted 8 lines
Quoted 5 lines
But I don't follow the recent changes including that
CONFIG_NET_MULTImigration, nor I don't have enough spare time to look into it, so gave up this time, sorry.The DM9000 driver uses the old networking API, and needs to be updated. I have it partly done and will be submitting to the ML soon. Hopefully you'll be able to test my patch :)
Nice! Once submitted, I'll check it builds on my side.