Skip to contentSkip to conversation

sh: romImage support V2

PATCH New Magnus Damm 1 participant 1 message Jul 29, 2009 SuperH

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 sh: romImage support V2

From: Magnus Damm <[email protected]>

This patch contains support for the romImage build target V2.

The resulting romImage file should be burned to rom or flash and could be used as small boot loader.

Board code should keep their setup code in the file romimage.h located in their mach include directory.

---

 arch/sh/Makefile                       |    2 +-
 arch/sh/boot/Makefile                  |   11 +++++++++--
 arch/sh/boot/romimage/Makefile         |   19 +++++++++++++++++++
 arch/sh/boot/romimage/head.S           |   10 ++++++++++
 arch/sh/boot/romimage/vmlinux.scr      |    6 ++++++
 arch/sh/include/mach-common/romimage.h |    1 +
 6 files changed, 46 insertions(+), 3 deletions(-)
arch/sh/Makefile +1 -1
@@ -195,7 +195,7 @@ libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
 BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \
-	       zImage vmlinux.srec
+	       zImage vmlinux.srec romImage
 PHONY += maketools $(BOOT_TARGETS) FORCE
 
 maketools:  include/linux/version.h FORCE
arch/sh/boot/Makefile +9 -2
@@ -24,9 +24,9 @@ suffix-$(CONFIG_KERNEL_GZIP)  := gz
 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
 suffix-$(CONFIG_KERNEL_LZMA)  := lzma
 
-targets := zImage vmlinux.srec uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
+targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
 extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
-subdir- := compressed
+subdir- := compressed romimage
 
 $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -35,6 +35,13 @@ $(obj)/zImage: $(obj)/compressed/vmlinux
 $(obj)/compressed/vmlinux: FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
+$(obj)/romImage: $(obj)/romimage/vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+$(obj)/romimage/vmlinux: $(obj)/zImage FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/romimage $@
+
 KERNEL_MEMORY := 0x00000000
 ifeq ($(CONFIG_PMB_FIXED),y)
 KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
arch/sh/boot/romimage/Makefile new file +19 -0
@@ -0,0 +1,19 @@
+#
+# linux/arch/sh/boot/romimage/Makefile
+#
+# create an image suitable for burning to flash from zImage
+#
+
+targets		:= vmlinux head.o
+
+OBJECTS = $(obj)/head.o
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
+	$(call if_changed,ld)
+	@:
+
+LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr arch/sh/boot/zImage FORCE
+	$(call if_changed,ld)
arch/sh/boot/romimage/head.S new file +10 -0
@@ -0,0 +1,10 @@
+/*
+ *  linux/arch/sh/boot/romimage/head.S
+ *
+ * Board specific setup code, executed before zImage loader
+ */
+
+.text
+	.global	romstart
+romstart:
+#include <romimage.h>
arch/sh/boot/romimage/vmlinux.scr new file +6 -0
@@ -0,0 +1,6 @@
+SECTIONS
+{
+  .text : {
+	*(.data)
+	}
+}
arch/sh/include/mach-common/romimage.h new file +1 -0
@@ -0,0 +1 @@
+/* do nothing here by default */