mptsas : Change DEFINED value of can queue for FC and SAS devices.

PATCH New Kashyap, Desai 1 participant 1 message Aug 5, 2009

Subsystems (2)

SCSI LSI Logic MPT fusion drivers (FC/SAS/SPI)

lore

Share & tools

lore

Kashyap, Desai

author

2009-08-05 07:39 UTC #0 lore raw

PATCH 1/7 mptsas : Change DEFINED value of can queue for FC and SAS devices.

Change DEFINED value of can queue for FC and SAS devices.
---

Signed-off-by Kashyap Desai <[email protected]>

---

drivers/message/fusion/mptbase.h +2 -1

index 1c8514d..73810fa 100644
@@ -157,8 +157,9 @@
 /*
  *	Try to keep these at 2^N-1
  */
-#define MPT_FC_CAN_QUEUE	127
+#define MPT_FC_CAN_QUEUE	1024
 #define MPT_SCSI_CAN_QUEUE	127
+#define MPT_SAS_CAN_QUEUE	127
 
 /*
  * Set the MAX_SGE value based on user input.

drivers/message/fusion/mptsas.c +1 -1

index 55ff252..c03968b 100644
@@ -1891,7 +1891,7 @@ static struct scsi_host_template mptsas_driver_template = {
 	.eh_bus_reset_handler		= mptscsih_bus_reset,
 	.eh_host_reset_handler		= mptscsih_host_reset,
 	.bios_param			= mptscsih_bios_param,
-	.can_queue			= MPT_FC_CAN_QUEUE,
+	.can_queue			= MPT_SAS_CAN_QUEUE,
 	.this_id			= -1,
 	.sg_tablesize			= MPT_SCSI_SG_DEPTH,
 	.max_sectors			= 8192,