Skip to contentSkip to conversation

Omap header cleanup for upcoming 2.6.32 merge window

PATCH In review Tony Lindgren 3 participants 10 messages Aug 6, 2009 – Aug 24, 2009

Subsystems (10)
Arm (32-bit) Arm sub-architectures Memory technology devices (MTD) Framebuffer layer +6 more subsystems
lore
Share & tools
lore

Tony Lindgren

author maintainer
#0 lore raw

cover Omap header cleanup for upcoming 2.6.32 merge window

Hi all,

Here are few patches for the upcoming merge window to remove unnecessary ifdeffery in the header files.

We should get these merged early to avoid merge conflicts with other patchsets.

Regards,

Tony

---

Tony Lindgren (3):
OMAP: Remove ifdefs for io.h
OMAP: Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE
OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

 arch/arm/mach-omap1/devices.c                 |    2 -
 arch/arm/mach-omap1/io.c                      |    6 +-
 arch/arm/mach-omap1/pm.h                      |    4 +
 arch/arm/mach-omap1/serial.c                  |    6 +-
 arch/arm/mach-omap1/sram.S                    |   12 ++-
 arch/arm/mach-omap1/time.c                    |    4 +
 arch/arm/mach-omap2/board-4430sdp.c           |    4 +
 arch/arm/mach-omap2/cm.h                      |    6 +-
 arch/arm/mach-omap2/omap-smp.c                |    2 -
 arch/arm/mach-omap2/pm-debug.c                |    2 -
 arch/arm/mach-omap2/prm.h                     |    6 +-
 arch/arm/mach-omap2/sdrc.h                    |    6 +-
 arch/arm/mach-omap2/serial.c                  |    6 +-
 arch/arm/mach-omap2/sram242x.S                |    4 +
 arch/arm/mach-omap2/sram243x.S                |    4 +
 arch/arm/mach-omap2/timer-gp.c                |    2 -
 arch/arm/plat-omap/dma.c                      |    8 +-
 arch/arm/plat-omap/dmtimer.c                  |    5 +
 arch/arm/plat-omap/gpio.c                     |   88 +++++++++++------------
 arch/arm/plat-omap/include/mach/control.h     |   12 ++-
 arch/arm/plat-omap/include/mach/entry-macro.S |    8 +-
 arch/arm/plat-omap/include/mach/gpio.h        |    2 -
 arch/arm/plat-omap/include/mach/io.h          |   97 ++++++++++++-------------
 arch/arm/plat-omap/include/mach/mtd-xip.h     |    2 -
 arch/arm/plat-omap/include/mach/omap44xx.h    |    8 +-
 arch/arm/plat-omap/include/mach/sdrc.h        |    6 +-
 arch/arm/plat-omap/io.c                       |   62 +++++++++++++++-
 arch/arm/plat-omap/sram.c                     |   20 +++--
 drivers/input/keyboard/omap-keypad.c          |   22 +++---
 drivers/mtd/nand/ams-delta.c                  |    8 +-
 drivers/video/omap/dispc.c                    |    6 +-
 31 files changed, 245 insertions(+), 185 deletions(-)
Signature · 1 line
Signature
author maintainer
#1 lore raw

PATCH 1/3 OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS, and convert omap_read/write into a functions instead of a macros.

Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE.

In the long run, most code should use ioremap + __raw_read/write instead.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/mach-omap1/devices.c                 |    2 -
 arch/arm/mach-omap1/pm.h                      |    4 +
 arch/arm/mach-omap1/serial.c                  |    6 +-
 arch/arm/mach-omap1/sram.S                    |   12 ++-
 arch/arm/mach-omap1/time.c                    |    4 +
 arch/arm/mach-omap2/board-4430sdp.c           |    4 +
 arch/arm/mach-omap2/cm.h                      |    6 +-
 arch/arm/mach-omap2/omap-smp.c                |    2 -
 arch/arm/mach-omap2/pm-debug.c                |    2 -
 arch/arm/mach-omap2/prm.h                     |    6 +-
 arch/arm/mach-omap2/sdrc.h                    |    6 +-
 arch/arm/mach-omap2/serial.c                  |    6 +-
 arch/arm/mach-omap2/sram242x.S                |    4 +
 arch/arm/mach-omap2/sram243x.S                |    4 +
 arch/arm/mach-omap2/timer-gp.c                |    2 -
 arch/arm/plat-omap/dma.c                      |    8 +-
 arch/arm/plat-omap/dmtimer.c                  |    5 +
 arch/arm/plat-omap/gpio.c                     |   86 +++++++++++++------------
 arch/arm/plat-omap/include/mach/control.h     |   12 ++-
 arch/arm/plat-omap/include/mach/entry-macro.S |    8 +-
 arch/arm/plat-omap/include/mach/io.h          |   64 ++++++-------------
 arch/arm/plat-omap/include/mach/mtd-xip.h     |    2 -
 arch/arm/plat-omap/include/mach/omap44xx.h    |    8 +-
 arch/arm/plat-omap/include/mach/sdrc.h        |    6 +-
 arch/arm/plat-omap/io.c                       |   58 +++++++++++++++++
 arch/arm/plat-omap/sram.c                     |   20 +++---
 drivers/video/omap/dispc.c                    |    6 +-
 27 files changed, 196 insertions(+), 157 deletions(-)
arch/arm/mach-omap1/devices.c +1 -1
index bbbaeb0..0680843 100644
@@ -71,7 +71,7 @@ static inline void omap_init_rtc(void) {}
 #  define INT_DSP_MAILBOX1	INT_1610_DSP_MAILBOX1
 #endif
 
-#define OMAP1_MBOX_BASE		IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE		OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
 
 static struct resource mbox_resources[] = {
 	{
arch/arm/mach-omap1/pm.h +2 -2
index 9ed5e2c..c4f05bd 100644
@@ -39,11 +39,11 @@
  * Register and offset definitions to be used in PM assembler code
  * ----------------------------------------------------------------------------
  */
-#define CLKGEN_REG_ASM_BASE		IO_ADDRESS(0xfffece00)
+#define CLKGEN_REG_ASM_BASE		OMAP1_IO_ADDRESS(0xfffece00)
 #define ARM_IDLECT1_ASM_OFFSET		0x04
 #define ARM_IDLECT2_ASM_OFFSET		0x08
 
-#define TCMIF_ASM_BASE			IO_ADDRESS(0xfffecc00)
+#define TCMIF_ASM_BASE			OMAP1_IO_ADDRESS(0xfffecc00)
 #define EMIFS_CONFIG_ASM_OFFSET		0x0c
 #define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
arch/arm/mach-omap1/serial.c +3 -3
index f754cee..6f54b2c 100644
@@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,

@@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,

@@ -82,7 +82,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
arch/arm/mach-omap1/sram.S +6 -6
index 261cdc4..7724e52 100644
@@ -21,13 +21,13 @@
 ENTRY(omap1_sram_reprogram_clock)
 	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
 
-	mov	r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
-	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000
-	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00
+	mov	r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000
+	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000
+	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00
 
-	mov	r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000
-	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
-	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
+	mov	r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000
+	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
+	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
 
 	tst	r0, #1 << 4			@ want lock mode?
 	beq	newck				@ nope
arch/arm/mach-omap1/time.c +2 -2
index 4d56408..1be6a21 100644
@@ -62,8 +62,8 @@ typedef struct {
 	u32 read_tim;			/* READ_TIM,   R */
 } omap_mpu_timer_regs_t;
 
-#define omap_mpu_timer_base(n)						\
-((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+#define omap_mpu_timer_base(n)							\
+((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 				 (n)*OMAP_MPU_TIMER_OFFSET))
 
 static inline unsigned long omap_mpu_timer_read(int nr)
arch/arm/mach-omap2/board-4430sdp.c +2 -2
index 57e477b..543c0a4 100644
@@ -53,8 +53,8 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 
 static void __init gic_init_irq(void)
 {
-	gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
-	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
 }
 
 static void __init omap_4430sdp_init_irq(void)
arch/arm/mach-omap2/cm.h +3 -3
index 1d3c93b..e10f1c8 100644
@@ -17,11 +17,11 @@
 #include "prcm-common.h"
 
 #define OMAP2420_CM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
 
 /*
  * Architecture-specific global CM registers
arch/arm/mach-omap2/omap-smp.c +1 -1
index 8fe8d23..48ee295 100644
@@ -54,7 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * for us: do so
 	 */
 
-	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
 
 	/*
 	 * Synchronise with the boot thread.
arch/arm/mach-omap2/pm-debug.c +1 -1
index 6cc375a..da3a53f 100644
@@ -48,7 +48,7 @@ int omap2_pm_debug;
 	regs[reg_count++].val = __raw_readl(reg)
 #define DUMP_INTC_REG(reg, off) \
 	regs[reg_count].name = #reg; \
-	regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+	regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
 
 void omap2_pm_dump(int mode, int resume, unsigned int us)
 {
arch/arm/mach-omap2/prm.h +3 -3
index 9937e28..03c467c 100644
@@ -17,11 +17,11 @@
 #include "prcm-common.h"
 
 #define OMAP2420_PRM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
 
 /*
  * Architecture-specific global PRM registers
arch/arm/mach-omap2/sdrc.h +3 -3
index 1a8bbd0..0837eda 100644
@@ -48,9 +48,9 @@ static inline u32 sms_read_reg(u16 reg)
 	return __raw_readl(OMAP_SMS_REGADDR(reg));
 }
 #else
-#define OMAP242X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
-#define OMAP243X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
-#define OMAP34XX_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+#define OMAP242X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
+#define OMAP243X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
+#define OMAP34XX_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
 #endif	/* __ASSEMBLER__ */
 
 #endif
arch/arm/mach-omap2/serial.c +3 -3
index b094c15..07fb275 100644
@@ -73,7 +73,7 @@ static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= 72,
 		.flags		= UPF_BOOT_AUTOCONF,

@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
-		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
 		.flags		= UPF_BOOT_AUTOCONF,

@@ -89,7 +89,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
-		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
 		.flags		= UPF_BOOT_AUTOCONF,
arch/arm/mach-omap2/sram242x.S +2 -2
index bb29985..9b62208 100644
@@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl:
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
 	.word	. - omap242x_sram_ddr_init
 

@@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
 	.word	. - omap242x_sram_reprogram_sdrc
arch/arm/mach-omap2/sram243x.S +2 -2
index 9955abc..df2cd92 100644
@@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl:
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
 	.word	. - omap243x_sram_ddr_init
 

@@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
 	.word	. - omap243x_sram_reprogram_sdrc
arch/arm/mach-omap2/timer-gp.c +1 -1
index 97eeeeb..e2338c0 100644
@@ -231,7 +231,7 @@ static void __init omap2_gp_clocksource_init(void)
 static void __init omap2_gp_timer_init(void)
 {
 #ifdef CONFIG_LOCAL_TIMERS
-	twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+	twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
 #endif
 	omap_dm_timer_init();
arch/arm/plat-omap/dma.c +4 -4
index e3ac94f..bf08634 100644
@@ -2337,16 +2337,16 @@ static int __init omap_init_dma(void)
 	int ch, r;
 
 	if (cpu_class_is_omap1()) {
-		omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
+		omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
 		dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap24xx()) {
-		omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
+		omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap34xx()) {
-		omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
+		omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap44xx()) {
-		omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
arch/arm/plat-omap/dmtimer.c +4 -1
index 7f50b61..d325b54 100644
@@ -774,7 +774,10 @@ int __init omap_dm_timer_init(void)
 
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
-		timer->io_base = IO_ADDRESS(timer->phys_base);
+		if (cpu_class_is_omap1())
+			timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
+		else
+			timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
arch/arm/plat-omap/gpio.c +43 -43

148 lines not on this page · raw message

arch/arm/plat-omap/include/mach/control.h +6 -6
index 8140dbc..826d317 100644
@@ -20,15 +20,15 @@
 
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
-	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
 #define OMAP243X_CTRL_REGADDR(reg)					\
-	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
-	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #else
-#define OMAP242X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define OMAP242X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #endif /* __ASSEMBLY__ */
 
 /*
arch/arm/plat-omap/include/mach/entry-macro.S +4 -4
index 56426ed..a559299 100644
@@ -41,7 +41,7 @@
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
 		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
 		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
 		mov	\irqstat, #0xffffffff

@@ -53,7 +53,7 @@
 		cmp	\irqnr, #0
 		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
 		cmpeq	\irqnr, #INT_IH2_IRQ
-		ldreq	\base, =IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
 		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
 		addeqs	\irqnr, \irqnr, #32
 1510:

@@ -68,9 +68,9 @@
 
 /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
 #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
 #elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
 #include <mach/omap44xx.h>
arch/arm/plat-omap/include/mach/io.h +21 -43

98 lines not on this page · raw message

arch/arm/plat-omap/include/mach/mtd-xip.h +1 -1
index 39b591f..f82a8dc 100644
@@ -25,7 +25,7 @@ typedef struct {
 } xip_omap_mpu_timer_regs_t;
 
 #define xip_omap_mpu_timer_base(n)					\
-((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 	(n)*OMAP_MPU_TIMER_OFFSET))
 
 static inline unsigned long xip_omap_mpu_timer_read(int nr)
arch/arm/plat-omap/include/mach/omap44xx.h +4 -4
index 15dec7f..b3ba5ac 100644
@@ -33,14 +33,14 @@
 #define IRQ_SIR_IRQ			0x0040
 #define OMAP44XX_GIC_DIST_BASE		0x48241000
 #define OMAP44XX_GIC_CPU_BASE		0x48240100
-#define OMAP44XX_VA_GIC_CPU_BASE	IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
 #define OMAP44XX_SCU_BASE		0x48240000
-#define OMAP44XX_VA_SCU_BASE		IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_VA_SCU_BASE		OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
 #define OMAP44XX_LOCAL_TWD_BASE		0x48240600
-#define OMAP44XX_VA_LOCAL_TWD_BASE	IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_VA_LOCAL_TWD_BASE	OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
 #define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
 #define OMAP44XX_WKUPGEN_BASE		0x48281000
-#define OMAP44XX_VA_WKUPGEN_BASE	IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+#define OMAP44XX_VA_WKUPGEN_BASE	OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
 
 #endif /* __ASM_ARCH_OMAP44XX_H */
arch/arm/plat-omap/include/mach/sdrc.h +3 -3
index adc7352..1f44cd1 100644
@@ -67,11 +67,11 @@
  */
 
 #define OMAP242X_SMS_REGADDR(reg)					\
-			(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+			(void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
 #define OMAP243X_SMS_REGADDR(reg)					\
-			(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+			(void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
 #define OMAP343X_SMS_REGADDR(reg)					\
-			(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+			(void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
arch/arm/plat-omap/io.c +58 -0

61 lines not on this page · raw message

arch/arm/plat-omap/sram.c +10 -10
index 2890b11..45b02f7 100644
@@ -56,16 +56,16 @@
 #define SRAM_BOOTLOADER_SZ	0x80
 #endif
 
-#define OMAP24XX_VA_REQINFOPERM0	IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0		IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0		IO_ADDRESS(0x68005058)
-
-#define OMAP34XX_VA_REQINFOPERM0	IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0		IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0		IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2		IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0		IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT	IO_ADDRESS(0x480022F0)
+#define OMAP24XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT	OMAP2_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE		0x300
drivers/video/omap/dispc.c +3 -3
index 148cbcc..915439d 100644
@@ -212,9 +212,9 @@ static void enable_rfbi_mode(int enable)
 	dispc_write_reg(DISPC_CONTROL, l);
 
 	/* Set bypass mode in RFBI module */
-	l = __raw_readl(IO_ADDRESS(RFBI_CONTROL));
+	l = __raw_readl(OMAP2_IO_ADDRESS(RFBI_CONTROL));
 	l |= enable ? 0 : (1 << 1);
-	__raw_writel(l, IO_ADDRESS(RFBI_CONTROL));
+	__raw_writel(l, OMAP2_IO_ADDRESS(RFBI_CONTROL));
 }
 
 static void set_lcd_data_lines(int data_lines)

@@ -1421,7 +1421,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
 	}
 
 	/* L3 firewall setting: enable access to OCM RAM */
-	__raw_writel(0x402000b0, IO_ADDRESS(0x680050a0));
+	__raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0));
 
 	if ((r = alloc_palette_ram()) < 0)
 		goto fail2;
author maintainer
#4 lore raw

PATCH 2/3 OMAP: Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE

In reply to Tony Lindgren

Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/plat-omap/gpio.c              |    4 ++--
 arch/arm/plat-omap/include/mach/gpio.h |    2 +-
 drivers/input/keyboard/omap-keypad.c   |   22 +++++++++++-----------
 drivers/mtd/nand/ams-delta.c           |    8 ++++----
 4 files changed, 18 insertions(+), 18 deletions(-)
arch/arm/plat-omap/gpio.c +2 -2
index 59010e5..3b4b407 100644
@@ -99,7 +99,7 @@
 #define OMAP850_GPIO_INT_MASK		0x10
 #define OMAP850_GPIO_INT_STATUS		0x14
 
-#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP_MPUIO_BASE)
+#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
 
 /*
  * omap24xx specific GPIO registers

@@ -224,7 +224,7 @@ static struct gpio_bank gpio_bank_730[7] = {
 
 #ifdef CONFIG_ARCH_OMAP850
 static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP1_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
arch/arm/plat-omap/include/mach/gpio.h +1 -1
index 2b22a87..633ff68 100644
@@ -29,7 +29,7 @@
 #include <linux/io.h>
 #include <mach/irqs.h>
 
-#define OMAP_MPUIO_BASE			0xfffb5000
+#define OMAP1_MPUIO_BASE			0xfffb5000
 
 #if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
drivers/input/keyboard/omap-keypad.c +11 -11
index 87ec7b1..bba85ad 100644
@@ -116,7 +116,7 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
 		}
 	} else
 		/* disable keyboard interrupt and schedule for handling */
-		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
 	tasklet_schedule(&kp_tasklet);
 

@@ -143,20 +143,20 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
 
 	} else {
 		/* disable keyboard interrupt and schedule for handling */
-		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
 		/* read the keypad status */
-		omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+		omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
 		for (col = 0; col < omap_kp->cols; col++) {
 			omap_writew(~(1 << col) & 0xff,
-				    OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+				    OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
 
 			udelay(omap_kp->delay);
 
-			state[col] = ~omap_readw(OMAP_MPUIO_BASE +
+			state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
 						 OMAP_MPUIO_KBR_LATCH) & 0xff;
 		}
-		omap_writew(0x00, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+		omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
 		udelay(2);
 	}
 }

@@ -234,7 +234,7 @@ static void omap_kp_tasklet(unsigned long data)
 			for (i = 0; i < omap_kp_data->rows; i++)
 				enable_irq(gpio_to_irq(row_gpios[i]));
 		} else {
-			omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+			omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 			kp_cur_group = -1;
 		}
 	}

@@ -317,7 +317,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 
 	/* Disable the interrupt for the MPUIO keyboard */
 	if (!cpu_is_omap24xx())
-		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
 	keymap = pdata->keymap;
 

@@ -391,7 +391,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	}
 
 	if (pdata->dbounce)
-		omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
+		omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
 
 	/* scan current status and enable interrupt */
 	omap_kp_scan_keypad(omap_kp, keypad_state);

@@ -402,7 +402,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 					"omap-keypad", omap_kp) < 0)
 				goto err4;
 		}
-		omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 	} else {
 		for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) {
 			if (request_irq(gpio_to_irq(row_gpios[irq_idx]),

@@ -449,7 +449,7 @@ static int __devexit omap_kp_remove(struct platform_device *pdev)
 			free_irq(gpio_to_irq(row_gpios[i]), 0);
 		}
 	} else {
-		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 		free_irq(omap_kp->irq, 0);
 	}
drivers/mtd/nand/ams-delta.c +4 -4
index 782994e..005b91f 100644
@@ -63,7 +63,7 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
 {
 	struct nand_chip *this = mtd->priv;
 
-	omap_writew(0, (OMAP_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
+	omap_writew(0, (OMAP1_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
 	omap_writew(byte, this->IO_ADDR_W);
 	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, 0);
 	ndelay(40);

@@ -78,7 +78,7 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd)
 
 	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, 0);
 	ndelay(40);
-	omap_writew(~0, (OMAP_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
+	omap_writew(~0, (OMAP1_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
 	res = omap_readw(this->IO_ADDR_R);
 	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE,
 			       AMS_DELTA_LATCH2_NAND_NRE);

@@ -178,8 +178,8 @@ static int __init ams_delta_init(void)
 	ams_delta_mtd->priv = this;
 
 	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = (OMAP_MPUIO_BASE + OMAP_MPUIO_INPUT_LATCH);
-	this->IO_ADDR_W = (OMAP_MPUIO_BASE + OMAP_MPUIO_OUTPUT);
+	this->IO_ADDR_R = (OMAP1_MPUIO_BASE + OMAP_MPUIO_INPUT_LATCH);
+	this->IO_ADDR_W = (OMAP1_MPUIO_BASE + OMAP_MPUIO_OUTPUT);
 	this->read_byte = ams_delta_read_byte;
 	this->write_buf = ams_delta_write_buf;
 	this->read_buf = ams_delta_read_buf;
author maintainer
#5 lore raw

PATCH 3/3 OMAP: Remove ifdefs for io.h

In reply to Tony Lindgren

Remove ifdefs for io.h

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/mach-omap1/io.c             |    6 +++---
 arch/arm/plat-omap/include/mach/io.h |   37 +++++++++++++++++++++++++++-------
 arch/arm/plat-omap/io.c              |    4 ++--
 3 files changed, 34 insertions(+), 13 deletions(-)
arch/arm/mach-omap1/io.c +3 -3
index 3afe540..7030f92 100644
@@ -29,9 +29,9 @@ extern void omapfb_reserve_sdram(void);
  */
 static struct map_desc omap_io_desc[] __initdata = {
 	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
+		.virtual	= OMAP1_IO_VIRT,
+		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
+		.length		= OMAP1_IO_SIZE,
 		.type		= MT_DEVICE
 	}
 };
arch/arm/plat-omap/include/mach/io.h +29 -8
index 8541388..c4886f9 100644
@@ -66,13 +66,21 @@
 #define OMAP2_IO_OFFSET		0x90000000
 #define OMAP2_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
 
-#if defined(CONFIG_ARCH_OMAP1)
+/*
+ * ----------------------------------------------------------------------------
+ * Omap1 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
-#define IO_PHYS			0xFFFB0000
-#define IO_SIZE			0x40000
-#define IO_VIRT			(IO_PHYS - OMAP1_IO_OFFSET)
+#define OMAP1_IO_PHYS		0xFFFB0000
+#define OMAP1_IO_SIZE		0x40000
+#define OMAP1_IO_VIRT		(OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
 
-#elif defined(CONFIG_ARCH_OMAP2)
+/*
+ * ----------------------------------------------------------------------------
+ * Omap2 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
 /* We map both L3 and L4 on OMAP2 */
 #define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */

@@ -106,7 +114,11 @@
 #define DSP_MMU_24XX_VIRT	0xe2000000
 #define DSP_MMU_24XX_SIZE	SZ_4K
 
-#elif defined(CONFIG_ARCH_OMAP3)
+/*
+ * ----------------------------------------------------------------------------
+ * Omap3 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
 /* We map both L3 and L4 on OMAP3 */
 #define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */

@@ -157,8 +169,12 @@
 #define DSP_MMU_34XX_VIRT	0xe2000000
 #define DSP_MMU_34XX_SIZE	SZ_4K
 
+/*
+ * ----------------------------------------------------------------------------
+ * Omap4 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
-#elif defined(CONFIG_ARCH_OMAP4)
 /* We map both L3 and L4 on OMAP4 */
 #define L3_44XX_PHYS		L3_44XX_BASE
 #define L3_44XX_VIRT		0xd4000000

@@ -185,7 +201,12 @@
 #define OMAP44XX_GPMC_VIRT	0xe0000000
 #define OMAP44XX_GPMC_SIZE	SZ_1M
 
-#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap specific register access
+ * ----------------------------------------------------------------------------
+ */
 
 #ifndef __ASSEMBLER__
arch/arm/plat-omap/io.c +2 -2
index d491ad1..b6defa2 100644
@@ -30,8 +30,8 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 {
 #ifdef CONFIG_ARCH_OMAP1
 	if (cpu_class_is_omap1()) {
-		if (BETWEEN(p, IO_PHYS, IO_SIZE))
-			return XLATE(p, IO_PHYS, IO_VIRT);
+		if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
+			return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
 	}
 	if (cpu_is_omap730()) {
 		if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
#2 lore raw

Re: [PATCH 1/3] OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

In reply to Tony Lindgren

Hi,

Quoted 43 lines · ext Tony Lindgren

Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS, and convert omap_read/write into a functions instead of a macros.

Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE.

In the long run, most code should use ioremap + __raw_read/write instead.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/mach-omap1/devices.c                 |    2 -
 arch/arm/mach-omap1/pm.h                      |    4 +
 arch/arm/mach-omap1/serial.c                  |    6 +-
 arch/arm/mach-omap1/sram.S                    |   12 ++-
 arch/arm/mach-omap1/time.c                    |    4 +
 arch/arm/mach-omap2/board-4430sdp.c           |    4 +
 arch/arm/mach-omap2/cm.h                      |    6 +-
 arch/arm/mach-omap2/omap-smp.c                |    2 -
 arch/arm/mach-omap2/pm-debug.c                |    2 -
 arch/arm/mach-omap2/prm.h                     |    6 +-
 arch/arm/mach-omap2/sdrc.h                    |    6 +-
 arch/arm/mach-omap2/serial.c                  |    6 +-
 arch/arm/mach-omap2/sram242x.S                |    4 +
 arch/arm/mach-omap2/sram243x.S                |    4 +
 arch/arm/mach-omap2/timer-gp.c                |    2 -
 arch/arm/plat-omap/dma.c                      |    8 +-
 arch/arm/plat-omap/dmtimer.c                  |    5 +
 arch/arm/plat-omap/gpio.c                     |   86 +++++++++++++------------
 arch/arm/plat-omap/include/mach/control.h     |   12 ++-
 arch/arm/plat-omap/include/mach/entry-macro.S |    8 +-
 arch/arm/plat-omap/include/mach/io.h          |   64 ++++++-------------
 arch/arm/plat-omap/include/mach/mtd-xip.h     |    2 -
 arch/arm/plat-omap/include/mach/omap44xx.h    |    8 +-
 arch/arm/plat-omap/include/mach/sdrc.h        |    6 +-
 arch/arm/plat-omap/io.c                       |   58 +++++++++++++++++
 arch/arm/plat-omap/sram.c                     |   20 +++---
 drivers/video/omap/dispc.c                    |    6 +-
 27 files changed, 196 insertions(+), 157 deletions(-)
arch/arm/mach-omap1/devices.c +0 -0
index bbbaeb0..0680843 100644

arch/arm/mach-omap1/devices.c static inline void omap_init_rtc(void) {} · line 74

Quoted 5 lines
arch/arm/mach-omap1/devices.c +1 -1
@@ -71,7 +71,7 @@ static inline void omap_init_rtc(void) {}
 #  define INT_DSP_MAILBOX1     INT_1610_DSP_MAILBOX1
 #endif
 
-#define OMAP1_MBOX_BASE                IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE                OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)

any chance to ioremap() at least this one ?

Signature · 1 line
balbi
author maintainer
#3 lore raw

Re: [PATCH 1/3] OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

Quoted 49 lines · Felipe Balbi

Hi,

Quoted 46 lines · ext Tony Lindgren

Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS, and convert omap_read/write into a functions instead of a macros.

Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE.

In the long run, most code should use ioremap + __raw_read/write instead.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/mach-omap1/devices.c                 |    2 -
 arch/arm/mach-omap1/pm.h                      |    4 +
 arch/arm/mach-omap1/serial.c                  |    6 +-
 arch/arm/mach-omap1/sram.S                    |   12 ++-
 arch/arm/mach-omap1/time.c                    |    4 +
 arch/arm/mach-omap2/board-4430sdp.c           |    4 +
 arch/arm/mach-omap2/cm.h                      |    6 +-
 arch/arm/mach-omap2/omap-smp.c                |    2 -
 arch/arm/mach-omap2/pm-debug.c                |    2 -
 arch/arm/mach-omap2/prm.h                     |    6 +-
 arch/arm/mach-omap2/sdrc.h                    |    6 +-
 arch/arm/mach-omap2/serial.c                  |    6 +-
 arch/arm/mach-omap2/sram242x.S                |    4 +
 arch/arm/mach-omap2/sram243x.S                |    4 +
 arch/arm/mach-omap2/timer-gp.c                |    2 -
 arch/arm/plat-omap/dma.c                      |    8 +-
 arch/arm/plat-omap/dmtimer.c                  |    5 +
 arch/arm/plat-omap/gpio.c                     |   86 +++++++++++++------------
 arch/arm/plat-omap/include/mach/control.h     |   12 ++-
 arch/arm/plat-omap/include/mach/entry-macro.S |    8 +-
 arch/arm/plat-omap/include/mach/io.h          |   64 ++++++-------------
 arch/arm/plat-omap/include/mach/mtd-xip.h     |    2 -
 arch/arm/plat-omap/include/mach/omap44xx.h    |    8 +-
 arch/arm/plat-omap/include/mach/sdrc.h        |    6 +-
 arch/arm/plat-omap/io.c                       |   58 +++++++++++++++++
 arch/arm/plat-omap/sram.c                     |   20 +++---
 drivers/video/omap/dispc.c                    |    6 +-
 27 files changed, 196 insertions(+), 157 deletions(-)
arch/arm/mach-omap1/devices.c +0 -0
index bbbaeb0..0680843 100644
@@ -71,7 +71,7 @@ static inline void omap_init_rtc(void) {}
 #  define INT_DSP_MAILBOX1     INT_1610_DSP_MAILBOX1
 #endif
Quoted 4 lines

arch/arm/mach-omap1/devices.c static inline void omap_init_rtc(void) {} · line 74

Quoted 2 lines
arch/arm/mach-omap1/devices.c +1 -1
-#define OMAP1_MBOX_BASE                IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE                OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)

any chance to ioremap() at least this one ?

Let's do once change at a time. It should be easy to start adding ioremap conversion patches on top of this series.

Tony

#6 lore raw
In reply to Tony Lindgren
Quoted 2 lines · Tony Lindgren

Here are few patches for the upcoming merge window to remove unnecessary ifdeffery in the header files.

I'm not sure what the plans are wrt OMAP1 vs the later OMAPs, but given that OMAP1 lives in a separate mach directory, I think it would make sense for the OMAP1 parts of the headers to be moved out to arch/arm/mach-omap1/include/mach, leaving the other parts in arch/arm/mach-omap2/include/mach.

Common stuff can be in arch/arm/plat-omap/include/plat/ and which should only really cover the code in arch/arm/plat-omap/

author maintainer
#7 lore raw
Quoted 9 lines · Russell King - ARM Linux
Quoted 2 lines · Tony Lindgren

Here are few patches for the upcoming merge window to remove unnecessary ifdeffery in the header files.

I'm not sure what the plans are wrt OMAP1 vs the later OMAPs, but given that OMAP1 lives in a separate mach directory, I think it would make sense for the OMAP1 parts of the headers to be moved out to arch/arm/mach-omap1/include/mach, leaving the other parts in arch/arm/mach-omap2/include/mach.

Yees.

After this series is applied we can move the remaining omap1 specific defines in hardware.h into omap1.h.

Quoted 2 lines

Common stuff can be in arch/arm/plat-omap/include/plat/ and which should only really cover the code in arch/arm/plat-omap/

Sounds good.

Tony

author maintainer
#8 lore raw

git pull request for omap header cleanup for upcoming 2.6.32 merge window

Russell,

Here's the pull request for these header clean-up patches.

Tony

The following changes since commit ed680c4ad478d0fee9740f7d029087f181346564:
Linus Torvalds (1):

        Linux 2.6.31-rc5

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-headers

Tony Lindgren (3):
OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead
OMAP: Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE
OMAP: Remove ifdefs for io.h

 arch/arm/mach-omap1/devices.c                 |    2 +-
 arch/arm/mach-omap1/io.c                      |    6 +-
 arch/arm/mach-omap1/pm.h                      |    4 +-
 arch/arm/mach-omap1/serial.c                  |    6 +-
 arch/arm/mach-omap1/sram.S                    |   12 ++--
 arch/arm/mach-omap1/time.c                    |    4 +-
 arch/arm/mach-omap2/board-4430sdp.c           |    4 +-
 arch/arm/mach-omap2/cm.h                      |    6 +-
 arch/arm/mach-omap2/omap-smp.c                |    2 +-
 arch/arm/mach-omap2/pm-debug.c                |    2 +-
 arch/arm/mach-omap2/prm.h                     |    6 +-
 arch/arm/mach-omap2/sdrc.h                    |    6 +-
 arch/arm/mach-omap2/serial.c                  |    6 +-
 arch/arm/mach-omap2/sram242x.S                |    4 +-
 arch/arm/mach-omap2/sram243x.S                |    4 +-
 arch/arm/mach-omap2/timer-gp.c                |    2 +-
 arch/arm/plat-omap/dma.c                      |    8 +-
 arch/arm/plat-omap/dmtimer.c                  |    5 +-
 arch/arm/plat-omap/gpio.c                     |   88 +++++++++++-----------
 arch/arm/plat-omap/include/mach/control.h     |   12 ++--
 arch/arm/plat-omap/include/mach/entry-macro.S |    8 +-
 arch/arm/plat-omap/include/mach/gpio.h        |    2 +-
 arch/arm/plat-omap/include/mach/io.h          |   97 ++++++++++++-------------
 arch/arm/plat-omap/include/mach/mtd-xip.h     |    2 +-
 arch/arm/plat-omap/include/mach/omap44xx.h    |    8 +-
 arch/arm/plat-omap/include/mach/sdrc.h        |    6 +-
 arch/arm/plat-omap/io.c                       |   62 +++++++++++++++-
 arch/arm/plat-omap/sram.c                     |   20 +++---
 drivers/input/keyboard/omap-keypad.c          |   22 +++---
 drivers/mtd/nand/ams-delta.c                  |    8 +-
 drivers/video/omap/dispc.c                    |    6 +-
 31 files changed, 245 insertions(+), 185 deletions(-)
-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
FAQ:        http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette:  http://www.arm.linux.org.uk/mailinglists/etiquette.php
author maintainer
#9 lore raw
In reply to Tony Lindgren
Quoted 7 lines · Tony Lindgren

Hi all,

Here are few patches for the upcoming merge window to remove unnecessary ifdeffery in the header files.

We should get these merged early to avoid merge conflicts with other patchsets.

I've added this series into omap for-next branch.

Quoted 51 lines

Regards,

Tony

---

Tony Lindgren (3):
OMAP: Remove ifdefs for io.h
OMAP: Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE
OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

 arch/arm/mach-omap1/devices.c                 |    2 -
 arch/arm/mach-omap1/io.c                      |    6 +-
 arch/arm/mach-omap1/pm.h                      |    4 +
 arch/arm/mach-omap1/serial.c                  |    6 +-
 arch/arm/mach-omap1/sram.S                    |   12 ++-
 arch/arm/mach-omap1/time.c                    |    4 +
 arch/arm/mach-omap2/board-4430sdp.c           |    4 +
 arch/arm/mach-omap2/cm.h                      |    6 +-
 arch/arm/mach-omap2/omap-smp.c                |    2 -
 arch/arm/mach-omap2/pm-debug.c                |    2 -
 arch/arm/mach-omap2/prm.h                     |    6 +-
 arch/arm/mach-omap2/sdrc.h                    |    6 +-
 arch/arm/mach-omap2/serial.c                  |    6 +-
 arch/arm/mach-omap2/sram242x.S                |    4 +
 arch/arm/mach-omap2/sram243x.S                |    4 +
 arch/arm/mach-omap2/timer-gp.c                |    2 -
 arch/arm/plat-omap/dma.c                      |    8 +-
 arch/arm/plat-omap/dmtimer.c                  |    5 +
 arch/arm/plat-omap/gpio.c                     |   88 +++++++++++------------
 arch/arm/plat-omap/include/mach/control.h     |   12 ++-
 arch/arm/plat-omap/include/mach/entry-macro.S |    8 +-
 arch/arm/plat-omap/include/mach/gpio.h        |    2 -
 arch/arm/plat-omap/include/mach/io.h          |   97 ++++++++++++-------------
 arch/arm/plat-omap/include/mach/mtd-xip.h     |    2 -
 arch/arm/plat-omap/include/mach/omap44xx.h    |    8 +-
 arch/arm/plat-omap/include/mach/sdrc.h        |    6 +-
 arch/arm/plat-omap/io.c                       |   62 +++++++++++++++-
 arch/arm/plat-omap/sram.c                     |   20 +++--
 drivers/input/keyboard/omap-keypad.c          |   22 +++---
 drivers/mtd/nand/ams-delta.c                  |    8 +-
 drivers/video/omap/dispc.c                    |    6 +-
 31 files changed, 245 insertions(+), 185 deletions(-)
Signature · 5 lines
Signature
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html