Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
PATCH 1/1 Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
Dear Ben Warren,
Quoted 20 lines · I wrote:
Note however that your modification was probably not the (only) culprit. With current mainline version I get this:
TRAB # run load
TFTP from server 192.168.1.1; our IP address is 192.168.3.68 Filename 'trab/u-boot.bin-wd'.
Load address:0xc100000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
TFTP from server 192.168.1.1; our IP address is 192.168.3.68 Filename 'trab/u-boot.bin-wd'.
Load address:0xc100000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
TFTP from server 192.168.1.1; our IP address is 192.168.3.68 Filename 'trab/u-boot.bin-wd'.
Load address:0xc100000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
Quoted 6 lines
with the timeouts being *way* too fast.
It seems that 1.2.0 was the last version that has been actually tested on trab / SMDK2400.
I'll try to run a git bisect tomorrow; need to get some sleep now.
Please ignore me:
U-Boot 2009.08-rc2-00016-g253cb83-dirty (Aug 13 2009 - 00:42:59)
I2C: ready DRAM: 32 MB Flash: 8 MB USB: scanning bus for devices... 1 USB Device(s) found
0 Storage Device(s) found
Enter password - autoboot in 5 sec...
TRAB # run load
TFTP from server 192.168.1.1; our IP address is 192.168.3.68 Filename 'trab/u-boot.bin-wd'.
Load address: 0xc100000
Loading: ################
done
Bytes transferred = 233844 (39174 hex)
TRAB #
So currrent mainline *is* working fine.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Any sufficiently advanced technology is indistinguishable from a rigged demo. - Andy Finkel, computer guy
PATCH 1/1 Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
Quoted 5 lines · Wolfgang Denk
Dear Ben Warren,
I wrote:
<snip>
Quoted 20 lines
Please ignore me:
U-Boot 2009.08-rc2-00016-g253cb83-dirty (Aug 13 2009 - 00:42:59)
I2C: ready DRAM: 32 MB Flash: 8 MB USB: scanning bus for devices... 1 USB Device(s) found0 Storage Device(s) found
Enter password - autoboot in 5 sec...
TRAB # run load
TFTP from server 192.168.1.1; our IP address is 192.168.3.68 Filename 'trab/u-boot.bin-wd'.
Load address:0xc100000
Loading: ################
done
Bytes transferred = 233844 (39174 hex)
TRAB #
Quoted 3 lines
So currrent mainline *is* working fine.
Good. At least we know exactly what's changed since the working version.
Quoted 5 lines
Best regards,
Wolfgang Denk
Sleep tight,
Ben