Temporary RCU fixes for notrace and hotplug CPU
cover Temporary RCU fixes for notrace and hotplug CPU
This patchset adds a couple of needed "notrace" declarations and one of two needed CPU-hotplug rcutree plugins. This applies on top of current tip/core/rcu, but is a temporary fix. The problem with it is that it is not bisectable when using ftrace.
This will be replaced with a later rework of the tip/core/rcu patch stack.
---
include/linux/rcupdate.h | 5 ++--- kernel/rcutree.c | 2 ++ kernel/rcutree_plugin.h | 25 ++++++++++++++++++++++++- 3 files changed, 28 insertions(+), 4 deletions(-)
PATCH 2/2 Add CPU-offline processing for single-node configurations
From: Paul E. McKenney <[email protected]>
Add preemptable-RCU plugin to handle the CPU-offline processing. An additional plugin is forthcoming to handle multinode RCU trees, but this current plugin works for configurations up to 32 CPUs (64 CPUs for 64-bit kernels).
--- kernel/rcutree.c | 2 ++ kernel/rcutree_plugin.h | 24 ++++++++++++++++++++++++ 2 files changed, 26 insertions(+), 0 deletions(-)
kernel/rcutree.c +2 -0
@@ -84,6 +84,7 @@ extern long rcu_batches_completed_sched(void);static void cpu_quiet_msk (unsigned long mask,struct rcu_state *rsp,struct rcu_node *rnp,unsigned long flags);static void cpu_quiet_msk_finish (struct rcu_state *rsp,unsigned long flags); +static void __rcu_offline_cpu (int cpu,struct rcu_state *rsp);static void __rcu_process_callbacks (struct rcu_state *rsp,struct rcu_data *rdp); static void __call_rcu(struct rcu_head *head,
@@ -920,6 +921,7 @@ static void rcu_offline_cpu(int cpu) {__rcu_offline_cpu (cpu, &rcu_sched_state);__rcu_offline_cpu (cpu, &rcu_bh_state); +rcu_preempt_offline_cpu (cpu); }#else /* #ifdef CONFIG_HOTPLUG_CPU */
kernel/rcutree_plugin.h +24 -0
@@ -259,6 +259,18 @@ static int rcu_preempted_readers(struct rcu_node *rnp)return !list_empty (&rnp->blocked_tasks[rnp->gpnum &0x1 ]); } +#ifdef CONFIG_HOTPLUG_CPU + +/* +* Do CPU-offline processing for preemptable RCU. +*/ +static void rcu_preempt_offline_cpu (int cpu) +{ +__rcu_offline_cpu (cpu, &rcu_preempt_state); +} + +#endif /* #ifdef CONFIG_HOTPLUG_CPU */ +/* * Check for a quiescent state from the current CPU. When a task blocks, * the task is recorded in the corresponding CPU's rcu_node structure,
@@ -395,6 +407,18 @@ static int rcu_preempted_readers(struct rcu_node *rnp)return 0 ; } +#ifdef CONFIG_HOTPLUG_CPU + +/* +* Because preemptable RCU does not exist, it never needs CPU-offline +* processing. +*/ +static void rcu_preempt_offline_cpu (int cpu) +{ +} + +#endif /* #ifdef CONFIG_HOTPLUG_CPU */ +/* * Because preemptable RCU does not exist, it never has any callbacks * to check.
Signature · 1 line
1.5.2.5
PATCH 1/2 Add "notrace" to RCU function headers used by ftrace.
In reply to Paul E. McKenneyBoth rcu_read_lock_sched_notrace() and rcu_read_unlock_sched_notrace() are used by ftrace, and thus need to be marked "notrace". Unfortunately, my naive assumption that gcc would see the inner "notrace" does not hold. Kudos to Lai Jiangshan for noting this.
--- include/linux/rcupdate.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
include/linux/rcupdate.h +2 -2
@@ -191,7 +191,7 @@ static inline void rcu_read_lock_sched(void)__acquire (RCU_SCHED );rcu_read_acquire (); } -static inline void rcu_read_lock_sched_notrace (void ) +static inline notrace void rcu_read_lock_sched_notrace(void) {preempt_disable_notrace ();__acquire (RCU_SCHED );
@@ -209,7 +209,7 @@ static inline void rcu_read_unlock_sched(void)__release (RCU_SCHED );preempt_enable (); } -static inline void rcu_read_unlock_sched_notrace (void ) +static inline notrace void rcu_read_unlock_sched_notrace(void) {rcu_read_release ();__release (RCU_SCHED );
Signature · 1 line
1.5.2.5
Steven Rostedt
reviewerRe: [PATCH -tip 1/2] Add "notrace" to RCU function headers used by ftrace.
Quoted 24 lines · Paul E. McKenney
Both
rcu_read_lock_sched_notrace()andrcu_read_unlock_sched_notrace()are used by ftrace, and thus need to be marked "notrace". Unfortunately, my naive assumption that gcc would see the inner "notrace" does not hold. Kudos to Lai Jiangshan for noting this.Signed-off-by Paul E. McKenney <[email protected]>--- include/linux/rcupdate.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)include/linux/rcupdate.h +1
-1@@ -191,7 +191,7 @@ static inline void rcu_read_lock_sched(void)__acquire (RCU_SCHED );rcu_read_acquire (); } -static inline void rcu_read_lock_sched_notrace (void ) +static inline notrace void rcu_read_lock_sched_notrace(void) {preempt_disable_notrace ();__acquire (RCU_SCHED );
include/linux/rcupdate.h static inline void rcu_read_unlock_sched(void) · line 212
Quoted 5 lines
include/linux/rcupdate.h +1
-1@@ -209,7 +209,7 @@ static inline void rcu_read_unlock_sched(void)__release (RCU_SCHED );preempt_enable (); } -static inline void rcu_read_unlock_sched_notrace (void ) +static inline notrace void rcu_read_unlock_sched_notrace(void)
Funny, inlines should not be traced. Is gcc ignoring the inlines here?
-- Steve
Quoted 7 lines
include/linux/rcupdate.h +0
-0{rcu_read_release ();__release (RCU_SCHED );Signature · 1 line
1.5.2.5
Re: [PATCH -tip 1/2] Add "notrace" to RCU function headers used by ftrace.
Quoted 26 lines · * Steven Rostedt ([email protected]) wrote:
Quoted 23 lines · Paul E. McKenney
Both
rcu_read_lock_sched_notrace()andrcu_read_unlock_sched_notrace()are used by ftrace, and thus need to be marked "notrace". Unfortunately, my naive assumption that gcc would see the inner "notrace" does not hold. Kudos to Lai Jiangshan for noting this.Signed-off-by Paul E. McKenney <[email protected]>--- include/linux/rcupdate.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)include/linux/rcupdate.h +1
-1@@ -191,7 +191,7 @@ static inline void rcu_read_lock_sched(void)__acquire (RCU_SCHED );rcu_read_acquire (); } -static inline void rcu_read_lock_sched_notrace (void ) +static inline notrace void rcu_read_lock_sched_notrace(void) {preempt_disable_notrace ();__acquire (RCU_SCHED );
Quoted 9 lines
include/linux/rcupdate.h static inline void rcu_read_unlock_sched(void) · line 212
Quoted 6 lines
include/linux/rcupdate.h +1
-1@@ -209,7 +209,7 @@ static inline void rcu_read_unlock_sched(void)__release (RCU_SCHED );preempt_enable (); } -static inline void rcu_read_unlock_sched_notrace (void ) +static inline notrace void rcu_read_unlock_sched_notrace(void)Funny, inlines should not be traced. Is gcc ignoring the inlines here?
inline is just a hint. __attribute__((always_inline)) should be used to really really forbid gcc to generate any function call. So notrace is needed to make sure we do not trace such function call.
It reminds me of the old mkraid option --really-really-force (or something like that). ;)
Mathieu
Quoted 9 lines
-- Steve
Quoted 7 lines
include/linux/rcupdate.h +0
-0{rcu_read_release ();__release (RCU_SCHED );Signature · 1 line
1.5.2.5
Signature · 2 lines
Mathieu Desnoyers OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
Re: [PATCH -tip 1/2] Add "notrace" to RCU function headers used by ftrace.
In reply to Steven RostedtQuoted 26 lines · Steven Rostedt
Quoted 23 lines · Paul E. McKenney
Both
rcu_read_lock_sched_notrace()andrcu_read_unlock_sched_notrace()are used by ftrace, and thus need to be marked "notrace". Unfortunately, my naive assumption that gcc would see the inner "notrace" does not hold. Kudos to Lai Jiangshan for noting this.Signed-off-by Paul E. McKenney <[email protected]>--- include/linux/rcupdate.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)include/linux/rcupdate.h +1
-1@@ -191,7 +191,7 @@ static inline void rcu_read_lock_sched(void)__acquire (RCU_SCHED );rcu_read_acquire (); } -static inline void rcu_read_lock_sched_notrace (void ) +static inline notrace void rcu_read_lock_sched_notrace(void) {preempt_disable_notrace ();__acquire (RCU_SCHED );
Quoted 8 lines
include/linux/rcupdate.h static inline void rcu_read_unlock_sched(void) · line 212
Quoted 6 lines
include/linux/rcupdate.h +1
-1@@ -209,7 +209,7 @@ static inline void rcu_read_unlock_sched(void)__release (RCU_SCHED );preempt_enable (); } -static inline void rcu_read_unlock_sched_notrace (void ) +static inline notrace void rcu_read_unlock_sched_notrace(void)Funny, inlines should not be traced. Is gcc ignoring the inlines here?
Well, that was my line of thinking as well, until Lai Jiangshan set me straight. Version 4.x of gcc apparently decides on a case-by-case basis.
Thanx, Paul
Steven Rostedt
reviewerRe: [PATCH -tip 1/2] Add "notrace" to RCU function headers used by ftrace.
Quoted 36 lines · Paul E. McKenney
Quoted 26 lines · Steven Rostedt
Quoted 23 lines · Paul E. McKenney
Both
rcu_read_lock_sched_notrace()andrcu_read_unlock_sched_notrace()are used by ftrace, and thus need to be marked "notrace". Unfortunately, my naive assumption that gcc would see the inner "notrace" does not hold. Kudos to Lai Jiangshan for noting this.Signed-off-by Paul E. McKenney <[email protected]>--- include/linux/rcupdate.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)include/linux/rcupdate.h +1
-1@@ -191,7 +191,7 @@ static inline void rcu_read_lock_sched(void)__acquire (RCU_SCHED );rcu_read_acquire (); } -static inline void rcu_read_lock_sched_notrace (void ) +static inline notrace void rcu_read_lock_sched_notrace(void) {preempt_disable_notrace ();__acquire (RCU_SCHED );Quoted 8 lines
include/linux/rcupdate.h static inline void rcu_read_unlock_sched(void) · line 212
Quoted 6 lines
include/linux/rcupdate.h +1
-1@@ -209,7 +209,7 @@ static inline void rcu_read_unlock_sched(void)__release (RCU_SCHED );preempt_enable (); } -static inline void rcu_read_unlock_sched_notrace (void ) +static inline notrace void rcu_read_unlock_sched_notrace(void)Funny, inlines should not be traced. Is gcc ignoring the inlines here?
Quoted 3 lines
Well, that was my line of thinking as well, until Lai Jiangshan set me straight. Version 4.x of gcc apparently decides on a case-by-case basis.
Yeah, I've seen gcc do it, but when it does it to static inlines in header files, I just get a feeling to squinge.
-- Steve
Re: [PATCH -tip 1/2] Add "notrace" to RCU function headers used by ftrace.
Quoted 39 lines · Steven Rostedt
Quoted 36 lines · Paul E. McKenney
Quoted 34 lines · Steven Rostedt
Quoted 24 lines · Paul E. McKenney
Both
rcu_read_lock_sched_notrace()andrcu_read_unlock_sched_notrace()are used by ftrace, and thus need to be marked "notrace". Unfortunately, my naive assumption that gcc would see the inner "notrace" does not hold. Kudos to Lai Jiangshan for noting this.Signed-off-by Paul E. McKenney <[email protected]>--- include/linux/rcupdate.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)include/linux/rcupdate.h +1
-1@@ -191,7 +191,7 @@ static inline void rcu_read_lock_sched(void)__acquire (RCU_SCHED );rcu_read_acquire (); } -static inline void rcu_read_lock_sched_notrace (void ) +static inline notrace void rcu_read_lock_sched_notrace(void) {preempt_disable_notrace ();__acquire (RCU_SCHED );include/linux/rcupdate.h static inline void rcu_read_unlock_sched(void) · line 212
Quoted 5 lines
include/linux/rcupdate.h +1
-1@@ -209,7 +209,7 @@ static inline void rcu_read_unlock_sched(void)__release (RCU_SCHED );preempt_enable (); } -static inline void rcu_read_unlock_sched_notrace (void ) +static inline notrace void rcu_read_unlock_sched_notrace(void)Funny, inlines should not be traced. Is gcc ignoring the inlines here?
Quoted 6 lines
Quoted 3 lines
Well, that was my line of thinking as well, until Lai Jiangshan set me straight. Version 4.x of gcc apparently decides on a case-by-case basis.
Yeah, I've seen gcc do it, but when it does it to static inlines in header files, I just get a feeling to squinge.
Especially when they are as short and simple as those particular functions were...
Thanx, Paul
FYI, -tip testing found a new build warning on SH caused by the RCU tree (i suspect this warning triggers on other architectures as well):
/home/mingo/tip/kernel/rcutree.c:88: warning: '__rcu_offline_cpu' declared 'static' but never defined
it's harmless, but since we are generally trying to fix all warnings and gravitate towards more and more -Werror subsystems, it would be nice to fix this.
Ingo
[tip:core/rcu] rcu: Add "notrace" to RCU function headers used by ftrace
In reply to Paul E. McKenneyCommit-ID: 7c614d6461399acca5c0ba444f5db49cb332fc08 Gitweb: http://git.kernel.org/tip/7c614d6461399acca5c0ba444f5db49cb332fc08 Author: Paul E. McKenney <[email protected]> AuthorDate: Mon, 24 Aug 2009 09:42:00 -0700 Committer: Ingo Molnar <[email protected]> CommitDate: Mon, 24 Aug 2009 20:37:04 +0200
rcu: Add "notrace" to RCU function headers used by ftrace
Both rcu_read_lock_sched_notrace() and rcu_read_unlock_sched_notrace() are used by ftrace, and thus need to be marked "notrace".
Unfortunately, my naive assumption that gcc would see the inner "notrace" does not hold.
Kudos to Lai Jiangshan for noting this.
LKML-Reference: <12511321213243-git-send-email->
--- include/linux/rcupdate.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
include/linux/rcupdate.h +2 -2
@@ -191,7 +191,7 @@ static inline void rcu_read_lock_sched(void)__acquire (RCU_SCHED );rcu_read_acquire (); } -static inline void rcu_read_lock_sched_notrace (void ) +static inline notrace void rcu_read_lock_sched_notrace(void) {preempt_disable_notrace ();__acquire (RCU_SCHED );
@@ -209,7 +209,7 @@ static inline void rcu_read_unlock_sched(void)__release (RCU_SCHED );preempt_enable (); } -static inline void rcu_read_unlock_sched_notrace (void ) +static inline notrace void rcu_read_unlock_sched_notrace(void) {rcu_read_release ();__release (RCU_SCHED );
[tip:core/rcu] rcu: Add CPU-offline processing for single-node configurations
In reply to Paul E. McKenneyCommit-ID: 33f76148ced0e0618062e302d2a9614efdbd4a06 Gitweb: http://git.kernel.org/tip/33f76148ced0e0618062e302d2a9614efdbd4a06 Author: Paul E. McKenney <[email protected]> AuthorDate: Mon, 24 Aug 2009 09:42:01 -0700 Committer: Ingo Molnar <[email protected]> CommitDate: Mon, 24 Aug 2009 20:37:04 +0200
rcu: Add CPU-offline processing for single-node configurations
Add preemptable-RCU plugin to handle the CPU-offline processing.
An additional plugin is forthcoming to handle multinode RCU trees, but this current plugin works for configurations up to 32 CPUs (64 CPUs for 64-bit kernels).
LKML-Reference: <12511321213336-git-send-email->
--- kernel/rcutree.c | 2 ++ kernel/rcutree_plugin.h | 24 ++++++++++++++++++++++++ 2 files changed, 26 insertions(+), 0 deletions(-)
kernel/rcutree.c +2 -0
@@ -84,6 +84,7 @@ extern long rcu_batches_completed_sched(void);static void cpu_quiet_msk (unsigned long mask,struct rcu_state *rsp,struct rcu_node *rnp,unsigned long flags);static void cpu_quiet_msk_finish (struct rcu_state *rsp,unsigned long flags); +static void __rcu_offline_cpu (int cpu,struct rcu_state *rsp);static void __rcu_process_callbacks (struct rcu_state *rsp,struct rcu_data *rdp); static void __call_rcu(struct rcu_head *head,
@@ -920,6 +921,7 @@ static void rcu_offline_cpu(int cpu) {__rcu_offline_cpu (cpu, &rcu_sched_state);__rcu_offline_cpu (cpu, &rcu_bh_state); +rcu_preempt_offline_cpu (cpu); }#else /* #ifdef CONFIG_HOTPLUG_CPU */
kernel/rcutree_plugin.h +24 -0
@@ -259,6 +259,18 @@ static int rcu_preempted_readers(struct rcu_node *rnp)return !list_empty (&rnp->blocked_tasks[rnp->gpnum &0x1 ]); } +#ifdef CONFIG_HOTPLUG_CPU + +/* +* Do CPU-offline processing for preemptable RCU. +*/ +static void rcu_preempt_offline_cpu (int cpu) +{ +__rcu_offline_cpu (cpu, &rcu_preempt_state); +} + +#endif /* #ifdef CONFIG_HOTPLUG_CPU */ +/* * Check for a quiescent state from the current CPU. When a task blocks, * the task is recorded in the corresponding CPU's rcu_node structure,
@@ -395,6 +407,18 @@ static int rcu_preempted_readers(struct rcu_node *rnp)return 0 ; } +#ifdef CONFIG_HOTPLUG_CPU + +/* +* Because preemptable RCU does not exist, it never needs CPU-offline +* processing. +*/ +static void rcu_preempt_offline_cpu (int cpu) +{ +} + +#endif /* #ifdef CONFIG_HOTPLUG_CPU */ +/* * Because preemptable RCU does not exist, it never has any callbacks * to check.
btw., i'm still seeing crashes with the latest RCU bits:
[ 20.621740] Testing event sys_enter_futex: OK [ 20.629738] Testing event sys_exit_futex: OK [ 20.637737] Testing event lock_acquire: [reboot]
Possibly due to infinite recursion as well. Config attached.
Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc7
# Tue Aug 25 09:52:03 2009
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=yCONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
# CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED is not set
# CONFIG_BOOTPARAM_SUPPORT is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_BOOT_ALLOWED4=yCONFIG_BROKEN_BOOT_ALLOWED3=y
# CONFIG_BROKEN_BOOT_ALLOWED2 is not setCONFIG_BROKEN_BOOT_DISALLOWED=y
# CONFIG_BROKEN_BOOT_EUROPE is not set
# CONFIG_BROKEN_BOOT_TITAN is not setCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not setCONFIG_KERNEL_LZMA=yCONFIG_SWAP=y
# CONFIG_SYSVIPC is not setCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not setCONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not setCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=yCONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not setCONFIG_RCU_TRACE=yCONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not setCONFIG_TREE_RCU_TRACE=y
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_GROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not setCONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=yCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=yCONFIG_PID_NS=yCONFIG_NET_NS=y
# CONFIG_BLK_DEV_INITRD is not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#CONFIG_PERF_COUNTERS=y
# CONFIG_EVENT_PROFILE is not setCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=yCONFIG_STRIP_ASM_SYMS=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=y
# CONFIG_OPROFILE is not setCONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not setCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=y
#
# GCOV-based kernel profiling
#CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not setCONFIG_BLK_DEV_INTEGRITY=yCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=m
# CONFIG_IOSCHED_CFQ is not setCONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="anticipatory"CONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not set
# CONFIG_SPARSE_IRQ is not setCONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not setCONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not setCONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not setCONFIG_GENERIC_CPU=yCONFIG_X86_CPU=yCONFIG_X86_L1_CACHE_BYTES=64CONFIG_X86_INTERNODE_CACHE_BYTES=64CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not setCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=yCONFIG_CALGARY_IOMMU=yCONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=yCONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_STATS is not setCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=yCONFIG_IOMMU_API=yCONFIG_MAXSMP=yCONFIG_NR_CPUS=4096
# CONFIG_SCHED_SMT is not setCONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not setCONFIG_PREEMPT=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not setCONFIG_I8K=mCONFIG_MICROCODE=yCONFIG_MICROCODE_INTEL=yCONFIG_MICROCODE_AMD=yCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not setCONFIG_X86_CPU_DEBUG=mCONFIG_UP_WANTED_1=y
# CONFIG_UP_WANTED_2 is not setCONFIG_SMP=yCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_DIRECT_GBPAGES=yCONFIG_NUMA=y
# CONFIG_K8_NUMA is not setCONFIG_X86_64_ACPI_NUMA=yCONFIG_NODES_SPAN_OTHER_NODES=yCONFIG_NUMA_EMU=yCONFIG_NODES_SHIFT=9CONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=y
#
# Memory hotplug is currently incompatible with Software Suspend #CONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set CONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=yCONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MTRR is not setCONFIG_EFI=yCONFIG_SECCOMP=yCONFIG_CC_STACKPROTECTOR_ALL=y CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x1000000CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATION_NVS=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_ACPI=yCONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not setCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not setCONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not setCONFIG_ACPI_FAN=yCONFIG_ACPI_DOCK=yCONFIG_ACPI_PROCESSOR=mCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=mCONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=0CONFIG_ACPI_DEBUG=yCONFIG_ACPI_DEBUG_FUNC_TRACE=yCONFIG_ACPI_PCI_SLOT=mCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not setCONFIG_CPU_IDLE=yCONFIG_CPU_IDLE_GOV_LADDER=yCONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#CONFIG_I7300_IDLE_IOAT_CHANNEL=yCONFIG_I7300_IDLE=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not setCONFIG_PCIEPORTBUS=yCONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not setCONFIG_PCIEAER_INJECT=m
# CONFIG_PCIEASPM is not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=yCONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not setCONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not setCONFIG_ISA_DMA_API=yCONFIG_K8_NB=yCONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA is not setCONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not setCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=mCONFIG_NET_KEY=yCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=yCONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not setCONFIG_ARPD=yCONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not setCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=mCONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not setCONFIG_INET_LRO=yCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=yCONFIG_TCP_CONG_CUBIC=m
# CONFIG_TCP_CONG_WESTWOOD is not setCONFIG_TCP_CONG_HTCP=y
# CONFIG_TCP_CONG_HSTCP is not setCONFIG_TCP_CONG_HYBLA=yCONFIG_TCP_CONG_VEGAS=yCONFIG_TCP_CONG_SCALABLE=m
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not setCONFIG_TCP_CONG_YEAH=yCONFIG_TCP_CONG_ILLINOIS=yCONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="bic"CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not setCONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not setCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not setCONFIG_SCTP_DBG_OBJCNT=yCONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not setCONFIG_ATM=m
# CONFIG_ATM_CLIP is not set
# CONFIG_ATM_LANE is not setCONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not setCONFIG_STP=yCONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not setCONFIG_DECNET=mCONFIG_DECNET_ROUTER=yCONFIG_LLC=y
# CONFIG_LLC2 is not setCONFIG_IPX=y
# CONFIG_IPX_INTERN is not setCONFIG_ATALK=yCONFIG_DEV_APPLETALK=mCONFIG_IPDDP=mCONFIG_IPDDP_ENCAP=yCONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not setCONFIG_LAPB=y
# CONFIG_ECONET is not setCONFIG_WAN_ROUTER=yCONFIG_PHONET=yCONFIG_IEEE802154=yCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_ATM is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not setCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=yCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=yCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not setCONFIG_NET_SCH_DRR=m
#
# Classification
#CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not setCONFIG_NET_CLS_RSVP=y
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not setCONFIG_NET_SCH_FIFO=yCONFIG_DCB=y
#
# Network testing
#CONFIG_NET_PKTGEN=yCONFIG_NET_DROP_MONITOR=yCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not setCONFIG_NETROM=mCONFIG_ROSE=m
#
# AX.25 network device drivers
#CONFIG_MKISS=m
# CONFIG_6PACK is not setCONFIG_BPQETHER=mCONFIG_BAYCOM_SER_FDX=m
# CONFIG_BAYCOM_SER_HDX is not set
# CONFIG_YAM is not setCONFIG_CAN=y
# CONFIG_CAN_RAW is not setCONFIG_CAN_BCM=y
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=yCONFIG_CAN_DEV=y
# CONFIG_CAN_CALC_BITTIMING is not setCONFIG_CAN_SJA1000=mCONFIG_CAN_SJA1000_PLATFORM=mCONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_KVASER_PCI is not set
# CONFIG_CAN_DEBUG_DEVICES is not setCONFIG_IRDA=m
#
# IrDA protocols
#CONFIG_IRLAN=m
# CONFIG_IRCOMM is not setCONFIG_IRDA_ULTRA=y
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=yCONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=m
#
# Dongle support
#CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not setCONFIG_ACTISYS_DONGLE=m
# CONFIG_TEKRAM_DONGLE is not set
# CONFIG_TOIM3232_DONGLE is not setCONFIG_LITELINK_DONGLE=mCONFIG_MA600_DONGLE=mCONFIG_GIRBIL_DONGLE=mCONFIG_MCP2120_DONGLE=m
# CONFIG_OLD_BELKIN_DONGLE is not setCONFIG_ACT200L_DONGLE=m
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#CONFIG_USB_IRDA=mCONFIG_SIGMATEL_FIR=m
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not setCONFIG_SMC_IRCC_FIR=mCONFIG_ALI_FIR=mCONFIG_VLSI_FIR=mCONFIG_VIA_FIR=mCONFIG_MCS_FIR=mCONFIG_BT=mCONFIG_BT_L2CAP=mCONFIG_BT_SCO=m
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=mCONFIG_BT_HCIBTSDIO=mCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not setCONFIG_BT_HCIUART_LL=yCONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not setCONFIG_BT_HCIBFUSB=mCONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not setCONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not setCONFIG_WIRELESS_EXT=yCONFIG_LIB80211=yCONFIG_LIB80211_CRYPT_WEP=yCONFIG_LIB80211_CRYPT_CCMP=yCONFIG_LIB80211_CRYPT_TKIP=yCONFIG_WIMAX=yCONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not setCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=m
# CONFIG_PARPORT is not setCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=yCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=mCONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not setCONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not setCONFIG_BLK_DEV_SX8=mCONFIG_BLK_DEV_UB=yCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not setCONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not setCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not setCONFIG_PHANTOM=y
# CONFIG_SGI_IOC4 is not setCONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not setCONFIG_ICS932S401=yCONFIG_ENCLOSURE_SERVICES=mCONFIG_HP_ILO=mCONFIG_DELL_LAPTOP=yCONFIG_ISL29003=mCONFIG_C2PORT=mCONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not setCONFIG_EEPROM_93CX6=mCONFIG_CB710_CORE=mCONFIG_CB710_DEBUG=yCONFIG_CB710_DEBUG_ASSUMPTIONS=yCONFIG_HAVE_IDE=y
#
# SCSI device support
#CONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=yCONFIG_CHR_DEV_OSST=mCONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not setCONFIG_CHR_DEV_SCH=yCONFIG_SCSI_ENCLOSURE=mCONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not setCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=yCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=yCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not setCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=yCONFIG_BLK_DEV_3W_XXXX_RAID=mCONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not setCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000CONFIG_AIC7XXX_DEBUG_ENABLE=yCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC7XXX_OLD=mCONFIG_SCSI_AIC79XX=mCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=5000CONFIG_AIC79XX_DEBUG_ENABLE=yCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not setCONFIG_SCSI_MVSAS=y
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_DPT_I2O is not setCONFIG_SCSI_ADVANSYS=mCONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ARCMSR_AER is not setCONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not setCONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not setCONFIG_SCSI_MPT2SAS=yCONFIG_SCSI_MPT2SAS_MAX_SGE=128CONFIG_SCSI_MPT2SAS_LOGGING=y
# CONFIG_SCSI_HPTIOP is not setCONFIG_SCSI_BUSLOGIC=mCONFIG_LIBFC=yCONFIG_LIBFCOE=mCONFIG_FCOE=m
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not setCONFIG_SCSI_EATA=yCONFIG_SCSI_EATA_TAGGED_QUEUE=yCONFIG_SCSI_EATA_LINKED_COMMANDS=yCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=mCONFIG_SCSI_GDTH=yCONFIG_SCSI_IPS=mCONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not setCONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not setCONFIG_SCSI_IPR=mCONFIG_SCSI_IPR_TRACE=y
# CONFIG_SCSI_IPR_DUMP is not setCONFIG_SCSI_QLOGIC_1280=mCONFIG_SCSI_QLA_FC=mCONFIG_SCSI_QLA_ISCSI=yCONFIG_SCSI_LPFC=mCONFIG_SCSI_LPFC_DEBUG_FS=y
# CONFIG_SCSI_DC395x is not setCONFIG_SCSI_DC390T=yCONFIG_SCSI_SRP=mCONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not setCONFIG_SCSI_DH_HP_SW=mCONFIG_SCSI_DH_EMC=m
# CONFIG_SCSI_DH_ALUA is not setCONFIG_SCSI_OSD_INITIATOR=m
# CONFIG_SCSI_OSD_ULD is not setCONFIG_SCSI_OSD_DPRINT_SENSE=1CONFIG_SCSI_OSD_DEBUG=yCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not setCONFIG_SATA_AHCI=yCONFIG_SATA_SIL24=yCONFIG_ATA_SFF=yCONFIG_SATA_SVW=yCONFIG_ATA_PIIX=yCONFIG_SATA_MV=mCONFIG_SATA_NV=yCONFIG_PDC_ADMA=m
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not setCONFIG_SATA_SX4=mCONFIG_SATA_SIL=mCONFIG_SATA_SIS=mCONFIG_SATA_ULI=yCONFIG_SATA_VIA=mCONFIG_SATA_VITESSE=mCONFIG_SATA_INIC162X=mCONFIG_PATA_ACPI=y
# CONFIG_PATA_ALI is not setCONFIG_PATA_AMD=yCONFIG_PATA_ARTOP=yCONFIG_PATA_ATIIXP=yCONFIG_PATA_CMD640_PCI=mCONFIG_PATA_CMD64X=mCONFIG_PATA_CS5520=mCONFIG_PATA_CS5530=mCONFIG_PATA_CYPRESS=yCONFIG_PATA_EFAR=mCONFIG_ATA_GENERIC=yCONFIG_PATA_HPT366=y
# CONFIG_PATA_HPT37X is not setCONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not setCONFIG_PATA_IT821X=yCONFIG_PATA_IT8213=mCONFIG_PATA_JMICRON=m
# CONFIG_PATA_TRIFLEX is not setCONFIG_PATA_MARVELL=mCONFIG_PATA_MPIIX=mCONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not setCONFIG_PATA_NS87415=m
# CONFIG_PATA_OPTI is not setCONFIG_PATA_OPTIDMA=mCONFIG_PATA_PDC_OLD=yCONFIG_PATA_RADISYS=yCONFIG_PATA_RZ1000=yCONFIG_PATA_SC1200=yCONFIG_PATA_SERVERWORKS=m
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not setCONFIG_PATA_SIS=mCONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not setCONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=m
# CONFIG_MD_RAID1 is not setCONFIG_MD_RAID10=m
# CONFIG_MD_RAID456 is not setCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=yCONFIG_DM_DEBUG=yCONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not setCONFIG_DM_MIRROR=mCONFIG_DM_LOG_USERSPACE=mCONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not setCONFIG_DM_DELAY=y
# CONFIG_DM_UEVENT is not setCONFIG_FUSION=yCONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not setCONFIG_FUSION_SAS=mCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks. #
#
# See the help texts for more information.
#CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_SBP2 is not setCONFIG_FIREWIRE_NET=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not setCONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not setCONFIG_NETDEVICES=yCONFIG_DUMMY=mCONFIG_BONDING=mCONFIG_MACVLAN=mCONFIG_EQUALIZER=yCONFIG_TUN=m
# CONFIG_VETH is not setCONFIG_NET_SB1000=m
# CONFIG_ARCNET is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=m
# CONFIG_DAVICOM_PHY is not set CONFIG_QSEMI_PHY=m
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set CONFIG_VITESSE_PHY=mCONFIG_SMSC_PHY=yCONFIG_BROADCOM_PHY=mCONFIG_ICPLUS_PHY=mCONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set CONFIG_LSI_ET1011C_PHY=m CONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=m CONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=yCONFIG_SUNGEM=m
# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=yCONFIG_VORTEX=yCONFIG_TYPHOON=y
# CONFIG_ENC28J60 is not set CONFIG_ETHOC=yCONFIG_DNET=yCONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not setCONFIG_DE4X5=yCONFIG_WINBOND_840=mCONFIG_DM9102=y
# CONFIG_ULI526X is not set CONFIG_PCMCIA_XIRCOM=y
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not setCONFIG_FORCEDETH=yCONFIG_FORCEDETH_NAPI=yCONFIG_E100=yCONFIG_FEALNX=mCONFIG_NATSEMI=y
# CONFIG_NE2K_PCI is not set CONFIG_8139CP=yCONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y CONFIG_8139_OLD_RX_RESET=yCONFIG_R6040=yCONFIG_SIS900=m
# CONFIG_EPIC100 is not set CONFIG_SMSC9420=yCONFIG_SUNDANCE=mCONFIG_SUNDANCE_MMIO=y
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not setCONFIG_KS8851=y
# CONFIG_VIA_RHINE is not set CONFIG_SC92031=yCONFIG_ATL2=mCONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not setCONFIG_DL2K=m
# CONFIG_E1000 is not setCONFIG_E1000E=yCONFIG_IP1000=y
# CONFIG_IGB is not set
# CONFIG_IGBVF is not setCONFIG_NS83820=mCONFIG_HAMACHI=mCONFIG_YELLOWFIN=yCONFIG_R8169=yCONFIG_SIS190=mCONFIG_SKGE=mCONFIG_SKGE_DEBUG=yCONFIG_SKY2=yCONFIG_SKY2_DEBUG=y
# CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=yCONFIG_BNX2=mCONFIG_QLA3XXX=mCONFIG_ATL1=yCONFIG_ATL1E=y
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set CONFIG_MLX4_CORE=y
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not setCONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not setCONFIG_AIRO=m
# CONFIG_ATMEL is not setCONFIG_PRISM54=m
# CONFIG_USB_ZD1201 is not setCONFIG_IPW2100=m
# CONFIG_IPW2100_MONITOR is not setCONFIG_IPW2100_DEBUG=yCONFIG_IPW2200=m
# CONFIG_IPW2200_MONITOR is not setCONFIG_IPW2200_QOS=yCONFIG_IPW2200_DEBUG=yCONFIG_LIBIPW=mCONFIG_LIBIPW_DEBUG=yCONFIG_HOSTAP=yCONFIG_HOSTAP_FIRMWARE=yCONFIG_HOSTAP_FIRMWARE_NVRAM=yCONFIG_HOSTAP_PLX=yCONFIG_HOSTAP_PCI=m
# CONFIG_HERMES is not set
#
# WiMAX Wireless Broadband devices
#CONFIG_WIMAX_I2400M=mCONFIG_WIMAX_I2400M_SDIO=mCONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
#
# USB Network Adapters
#CONFIG_USB_CATC=yCONFIG_USB_KAWETH=yCONFIG_USB_PEGASUS=yCONFIG_USB_RTL8150=mCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_CDC_EEM=mCONFIG_USB_NET_DM9601=mCONFIG_USB_NET_SMSC95XX=mCONFIG_USB_NET_GL620A=m
# CONFIG_USB_NET_NET1080 is not setCONFIG_USB_NET_PLUSB=mCONFIG_USB_NET_MCS7830=y
# CONFIG_USB_NET_RNDIS_HOST is not setCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=y
# CONFIG_USB_AN2720 is not setCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=y
# CONFIG_USB_KC2190 is not setCONFIG_USB_NET_ZAURUS=yCONFIG_USB_NET_INT51X1=mCONFIG_USB_CDC_PHONET=mCONFIG_WAN=yCONFIG_LANMEDIA=yCONFIG_HDLC=yCONFIG_HDLC_RAW=mCONFIG_HDLC_RAW_ETH=mCONFIG_HDLC_CISCO=mCONFIG_HDLC_FR=mCONFIG_HDLC_PPP=mCONFIG_HDLC_X25=mCONFIG_PCI200SYN=mCONFIG_WANXL=mCONFIG_PC300TOO=mCONFIG_FARSYNC=y
# CONFIG_DSCC4 is not setCONFIG_DLCI=yCONFIG_DLCI_MAX=8CONFIG_WAN_ROUTER_DRIVERS=m
# CONFIG_CYCLADES_SYNC is not setCONFIG_SBNI=mCONFIG_SBNI_MULTILINE=yCONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not setCONFIG_ATM_TCP=mCONFIG_ATM_LANAI=mCONFIG_ATM_ENI=mCONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_FIRESTREAM is not setCONFIG_ATM_ZATM=mCONFIG_ATM_ZATM_DEBUG=yCONFIG_ATM_IDT77252=mCONFIG_ATM_IDT77252_DEBUG=y
# CONFIG_ATM_IDT77252_RCV_ALL is not setCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=mCONFIG_ATM_AMBASSADOR_DEBUG=yCONFIG_ATM_HORIZON=mCONFIG_ATM_HORIZON_DEBUG=yCONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not setCONFIG_ATM_FORE200E=mCONFIG_ATM_FORE200E_USE_TASKLET=yCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0CONFIG_ATM_HE=mCONFIG_ATM_HE_USE_SUNI=yCONFIG_ATM_SOLOS=m
# CONFIG_IEEE802154_DRIVERS is not setCONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not setCONFIG_HIPPI=yCONFIG_ROADRUNNER=mCONFIG_ROADRUNNER_LARGE_RINGS=y
# CONFIG_PPP is not setCONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not setCONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not setCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not setCONFIG_KEYBOARD_LM8323=yCONFIG_KEYBOARD_NEWTON=yCONFIG_KEYBOARD_STOWAWAY=m
# CONFIG_KEYBOARD_SUNKBD is not setCONFIG_KEYBOARD_XTKBD=yCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=mCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=yCONFIG_MOUSE_PS2_ELANTECH=yCONFIG_MOUSE_PS2_TOUCHKIT=yCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_BCM5974 is not setCONFIG_MOUSE_VSXXXAA=mCONFIG_MOUSE_SYNAPTICS_I2C=yCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=mCONFIG_JOYSTICK_A3D=m
# CONFIG_JOYSTICK_ADI is not setCONFIG_JOYSTICK_COBRA=yCONFIG_JOYSTICK_GF2K=mCONFIG_JOYSTICK_GRIP=mCONFIG_JOYSTICK_GRIP_MP=yCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=m
# CONFIG_JOYSTICK_SIDEWINDER is not setCONFIG_JOYSTICK_TMDC=yCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=yCONFIG_JOYSTICK_IFORCE_232=y
# CONFIG_JOYSTICK_WARRIOR is not setCONFIG_JOYSTICK_MAGELLAN=mCONFIG_JOYSTICK_SPACEORB=yCONFIG_JOYSTICK_SPACEBALL=yCONFIG_JOYSTICK_STINGER=yCONFIG_JOYSTICK_TWIDJOY=yCONFIG_JOYSTICK_ZHENHUA=mCONFIG_JOYSTICK_JOYDUMP=mCONFIG_JOYSTICK_XPAD=mCONFIG_JOYSTICK_XPAD_FF=yCONFIG_JOYSTICK_XPAD_LEDS=yCONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not setCONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_GTCO is not setCONFIG_TABLET_USB_KBTAB=mCONFIG_TABLET_USB_WACOM=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=yCONFIG_SERIO_CT82C710=mCONFIG_SERIO_PCIPS2=yCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not setCONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not setCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_FM801=y
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not setCONFIG_SERIAL_NONSTANDARD=yCONFIG_COMPUTONE=mCONFIG_ROCKETPORT=mCONFIG_CYCLADES=mCONFIG_CYZ_INTR=yCONFIG_DIGIEPCA=mCONFIG_MOXA_INTELLIO=mCONFIG_MOXA_SMARTIO=mCONFIG_ISI=m
# CONFIG_SYNCLINK is not setCONFIG_SYNCLINKMP=mCONFIG_SYNCLINK_GT=m
# CONFIG_N_HDLC is not setCONFIG_RISCOM8=m
# CONFIG_SPECIALIX is not setCONFIG_SX=yCONFIG_RIO=mCONFIG_RIO_OLDPCI=yCONFIG_STALDRV=yCONFIG_STALLION=mCONFIG_ISTALLION=yCONFIG_NOZOMI=m
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not setCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_MAX3100=mCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=mCONFIG_UNIX98_PTYS=yCONFIG_DEVPTS_MULTIPLE_INSTANCES=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_IPMI_HANDLER=mCONFIG_IPMI_PANIC_EVENT=yCONFIG_IPMI_PANIC_STRING=yCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=m
# CONFIG_HW_RANDOM is not setCONFIG_NVRAM=yCONFIG_R3964=yCONFIG_APPLICOM=yCONFIG_MWAVE=y
# CONFIG_PC8736x_GPIO is not setCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256CONFIG_HPET=yCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=yCONFIG_TCG_TPM=yCONFIG_TCG_TIS=yCONFIG_TCG_NSC=yCONFIG_TCG_ATMEL=mCONFIG_TCG_INFINEON=mCONFIG_TELCLOCK=mCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=m
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCF=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=mCONFIG_I2C_ALI1563=mCONFIG_I2C_ALI15X3=yCONFIG_I2C_AMD756=yCONFIG_I2C_AMD8111=yCONFIG_I2C_I801=yCONFIG_I2C_ISCH=yCONFIG_I2C_PIIX4=yCONFIG_I2C_NFORCE2=yCONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not setCONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_OCORES=yCONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_PARPORT_LIGHT=yCONFIG_I2C_TAOS_EVM=yCONFIG_I2C_TINY_USB=m
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_PCA_PLATFORM=mCONFIG_I2C_STUB=m
#
# Miscellaneous I2C Chip support
#CONFIG_DS1682=m
# CONFIG_SENSORS_PCF8574 is not setCONFIG_PCF8575=yCONFIG_SENSORS_PCA9539=yCONFIG_SENSORS_TSL2550=mCONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not setCONFIG_I2C_DEBUG_BUS=yCONFIG_I2C_DEBUG_CHIP=yCONFIG_SPI=yCONFIG_SPI_DEBUG=yCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=y
#
# SPI Protocol Masters
#CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
# CONFIG_PPS is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not setCONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=mCONFIG_W1_MASTER_DS2490=yCONFIG_W1_MASTER_DS2482=y
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=yCONFIG_W1_SLAVE_SMEM=yCONFIG_W1_SLAVE_DS2431=mCONFIG_W1_SLAVE_DS2433=yCONFIG_W1_SLAVE_DS2433_CRC=yCONFIG_W1_SLAVE_DS2760=y
# CONFIG_W1_SLAVE_BQ27000 is not setCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not setCONFIG_BATTERY_DS2760=yCONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_BQ27x00 is not setCONFIG_BATTERY_MAX17040=m
# CONFIG_CHARGER_PCF50633 is not setCONFIG_HWMON=yCONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not setCONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not setCONFIG_SENSORS_ADCXX=yCONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not setCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not setCONFIG_SENSORS_ADM9240=yCONFIG_SENSORS_ADT7462=mCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7473=yCONFIG_SENSORS_ADT7475=mCONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_ASB100 is not setCONFIG_SENSORS_ATK0110=y
# CONFIG_SENSORS_ATXP1 is not setCONFIG_SENSORS_DS1621=mCONFIG_SENSORS_I5K_AMB=mCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not setCONFIG_SENSORS_FSCPOS=mCONFIG_SENSORS_FSCHMD=mCONFIG_SENSORS_G760A=mCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=mCONFIG_SENSORS_CORETEMP=yCONFIG_SENSORS_IBMAEM=mCONFIG_SENSORS_IBMPEX=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_LM63=mCONFIG_SENSORS_LM70=mCONFIG_SENSORS_LM75=yCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=yCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LTC4215 is not setCONFIG_SENSORS_LTC4245=mCONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not setCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=yCONFIG_SENSORS_PCF8591=yCONFIG_SENSORS_SIS5595=mCONFIG_SENSORS_DME1737=yCONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not setCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_ADS7828=mCONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_TMP401 is not setCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=yCONFIG_SENSORS_VT8231=yCONFIG_SENSORS_W83781D=yCONFIG_SENSORS_W83791D=yCONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not setCONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not setCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=mCONFIG_SENSORS_HDAPS=mCONFIG_SENSORS_LIS3LV02D=yCONFIG_SENSORS_APPLESMC=yCONFIG_HWMON_DEBUG_CHIP=yCONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not setCONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not setCONFIG_ACQUIRE_WDT=mCONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not setCONFIG_ALIM7101_WDT=m
# CONFIG_SC520_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not setCONFIG_I6300ESB_WDT=m
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not setCONFIG_IT87_WDT=mCONFIG_HP_WATCHDOG=mCONFIG_SC1200_WDT=m
# CONFIG_PC87413_WDT is not setCONFIG_60XX_WDT=yCONFIG_SBC8360_WDT=m
# CONFIG_CPU5_WDT is not setCONFIG_SMSC_SCH311X_WDT=yCONFIG_SMSC37B787_WDT=yCONFIG_W83627HF_WDT=mCONFIG_W83877F_WDT=y
# CONFIG_W83977F_WDT is not setCONFIG_MACHZ_WDT=yCONFIG_SBC_EPX_C3_WATCHDOG=y
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=yCONFIG_WDTPCI=y
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=yCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=mCONFIG_MFD_SM501=m
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not setCONFIG_MFD_WM8400=mCONFIG_MFD_PCF50633=yCONFIG_PCF50633_ADC=mCONFIG_PCF50633_GPIO=yCONFIG_AB3100_CORE=mCONFIG_EZX_PCAP=yCONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not setCONFIG_REGULATOR_FIXED_VOLTAGE=mCONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not setCONFIG_REGULATOR_BQ24022=mCONFIG_REGULATOR_MAX1586=yCONFIG_REGULATOR_WM8400=mCONFIG_REGULATOR_PCF50633=yCONFIG_REGULATOR_LP3971=y
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=yCONFIG_AGP_SIS=yCONFIG_AGP_VIA=mCONFIG_DRM=yCONFIG_DRM_TDFX=mCONFIG_DRM_R128=yCONFIG_DRM_RADEON=yCONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not setCONFIG_DRM_MGA=mCONFIG_DRM_SIS=mCONFIG_DRM_VIA=m
# CONFIG_DRM_SAVAGE is not setCONFIG_VGASTATE=yCONFIG_VIDEO_OUTPUT_CONTROL=mCONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not setCONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not setCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=yCONFIG_FB_FOREIGN_ENDIAN=yCONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not setCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=yCONFIG_FB_HECUBA=yCONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_PM2 is not setCONFIG_FB_CYBER2000=yCONFIG_FB_ARC=yCONFIG_FB_IMSTT=y
# CONFIG_FB_UVESA is not setCONFIG_FB_EFI=yCONFIG_FB_N411=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not setCONFIG_FB_RIVA=yCONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_RIVA_BACKLIGHT is not set
# CONFIG_FB_LE80578 is not setCONFIG_FB_MATROX=mCONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not setCONFIG_FB_MATROX_I2C=m
# CONFIG_FB_MATROX_MULTIHEAD is not setCONFIG_FB_ATY128=mCONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not setCONFIG_FB_S3=y
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not setCONFIG_FB_VIA=yCONFIG_FB_NEOMAGIC=m
# CONFIG_FB_KYRO is not setCONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
# CONFIG_FB_3DFX_I2C is not setCONFIG_FB_VOODOO1=m
# CONFIG_FB_VT8623 is not setCONFIG_FB_TRIDENT=m
# CONFIG_FB_ARK is not setCONFIG_FB_PM3=yCONFIG_FB_CARMINE=yCONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not setCONFIG_FB_GEODE=yCONFIG_FB_GEODE_LX=mCONFIG_FB_GEODE_GX=mCONFIG_FB_GEODE_GX1=m
# CONFIG_FB_TMIO is not setCONFIG_FB_SM501=mCONFIG_FB_METRONOME=yCONFIG_FB_MB862XX=y
# CONFIG_FB_MB862XX_PCI_GDC is not set
# CONFIG_FB_BROADSHEET is not setCONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not setCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_GENERIC=yCONFIG_BACKLIGHT_PROGEAR=m
# CONFIG_BACKLIGHT_MBP_NVIDIA is not setCONFIG_BACKLIGHT_SAHARA=m
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=yCONFIG_FRAMEBUFFER_CONSOLE_ROTATION=yCONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_10x18=yCONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=yCONFIG_SOUND=mCONFIG_SOUND_OSS_CORE=y
# CONFIG_SND is not setCONFIG_SOUND_PRIME=m
# CONFIG_SOUND_OSS is not setCONFIG_HID_SUPPORT=yCONFIG_HID=m
# CONFIG_HID_DEBUG is not setCONFIG_HIDRAW=y
#
# USB Input Devices
#CONFIG_USB_HID=mCONFIG_HID_PID=y
# CONFIG_USB_HIDDEV is not setCONFIG_USB_MOUSE=y
#
# Special HID drivers
#CONFIG_HID_A4TECH=mCONFIG_HID_APPLE=mCONFIG_HID_BELKIN=mCONFIG_HID_CHERRY=mCONFIG_HID_CHICONY=mCONFIG_HID_CYPRESS=mCONFIG_HID_DRAGONRISE=mCONFIG_DRAGONRISE_FF=yCONFIG_HID_EZKEY=mCONFIG_HID_KYE=mCONFIG_HID_GYRATION=mCONFIG_HID_KENSINGTON=mCONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not setCONFIG_LOGIRUMBLEPAD2_FF=yCONFIG_HID_MICROSOFT=mCONFIG_HID_MONTEREY=mCONFIG_HID_NTRIG=mCONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not setCONFIG_HID_PETALYNX=mCONFIG_HID_SAMSUNG=mCONFIG_HID_SONY=mCONFIG_HID_SUNPLUS=mCONFIG_HID_GREENASIA=mCONFIG_GREENASIA_FF=yCONFIG_HID_SMARTJOYPLUS=mCONFIG_SMARTJOYPLUS_FF=yCONFIG_HID_TOPSEED=mCONFIG_HID_THRUSTMASTER=mCONFIG_THRUSTMASTER_FF=yCONFIG_HID_ZEROPLUS=mCONFIG_ZEROPLUS_FF=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not setCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not setCONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_XHCI_HCD=mCONFIG_USB_XHCI_HCD_DEBUGGING=yCONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not setCONFIG_USB_OXU210HP_HCD=yCONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not setCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not setCONFIG_USB_WDM=yCONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=m CONFIG_USB_STORAGE_USBAT=y # CONFIG_USB_STORAGE_SDDR09 is not set CONFIG_USB_STORAGE_SDDR55=m CONFIG_USB_STORAGE_JUMPSHOT=m CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=m CONFIG_USB_STORAGE_KARMA=y # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#CONFIG_USB_MDC800=y
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=mCONFIG_USB_EMI26=yCONFIG_USB_ADUTUX=mCONFIG_USB_SEVSEG=mCONFIG_USB_RIO500=mCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=yCONFIG_USB_BERRY_CHARGE=yCONFIG_USB_LED=y
# CONFIG_USB_CYPRESS_CY7C63 is not setCONFIG_USB_CYTHERM=mCONFIG_USB_IDMOUSE=mCONFIG_USB_FTDI_ELAN=mCONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not setCONFIG_USB_LD=mCONFIG_USB_TRANCEVIBRATOR=yCONFIG_USB_IOWARRIOR=mCONFIG_USB_TEST=mCONFIG_USB_ISIGHTFW=mCONFIG_USB_VST=mCONFIG_USB_ATM=mCONFIG_USB_SPEEDTOUCH=mCONFIG_USB_CXACRU=mCONFIG_USB_UEAGLEATM=m
# CONFIG_USB_XUSBATM is not set
#
# OTG and related infrastructure
#CONFIG_USB_OTG_UTILS=yCONFIG_NOP_USB_XCEIV=mCONFIG_UWB=mCONFIG_UWB_HWA=m
# CONFIG_UWB_WHCI is not setCONFIG_UWB_WLP=mCONFIG_UWB_I1480U=mCONFIG_UWB_I1480U_WLP=mCONFIG_MMC=yCONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=yCONFIG_MMC_BLOCK_BOUNCE=yCONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=yCONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not setCONFIG_MMC_SDHCI_PLTFM=mCONFIG_MMC_WBSD=y
# CONFIG_MMC_TIFM_SD is not setCONFIG_MMC_SPI=m
# CONFIG_MMC_CB710 is not setCONFIG_MMC_VIA_SDMMC=yCONFIG_MEMSTICK=yCONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#CONFIG_MEMSTICK_UNSAFE_RESUME=yCONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=yCONFIG_MEMSTICK_JMICRON_38X=yCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not setCONFIG_LEDS_PCA9532=mCONFIG_LEDS_LP3944=mCONFIG_LEDS_CLEVO_MAIL=y
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_HEARTBEAT=yCONFIG_LEDS_TRIGGER_BACKLIGHT=yCONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target) # CONFIG_ACCESSIBILITY=y # CONFIG_A11Y_BRAILLE_CONSOLE is not set CONFIG_INFINIBAND=y CONFIG_INFINIBAND_USER_MAD=y # CONFIG_INFINIBAND_USER_ACCESS is not set CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=y CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPATH=m CONFIG_INFINIBAND_AMSO1100=m CONFIG_INFINIBAND_AMSO1100_DEBUG=y CONFIG_MLX4_INFINIBAND=y # CONFIG_INFINIBAND_NES is not set CONFIG_INFINIBAND_IPOIB=y # CONFIG_INFINIBAND_IPOIB_CM is not set CONFIG_INFINIBAND_IPOIB_DEBUG=y CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y # CONFIG_INFINIBAND_SRP is not set # CONFIG_INFINIBAND_ISER is not set CONFIG_EDAC=y
#
# Reporting subsystems
#CONFIG_EDAC_DEBUG=yCONFIG_EDAC_DEBUG_VERBOSE=yCONFIG_EDAC_MM_EDAC=yCONFIG_EDAC_AMD64=mCONFIG_EDAC_AMD64_ERROR_INJECTION=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not setCONFIG_EDAC_I3000=mCONFIG_EDAC_X38=mCONFIG_EDAC_I5400=m
# CONFIG_EDAC_I5000 is not setCONFIG_EDAC_I5100=mCONFIG_RTC_LIB=mCONFIG_RTC_CLASS=m
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not setCONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not setCONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1672 is not setCONFIG_RTC_DRV_MAX6900=mCONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_ISL1208 is not setCONFIG_RTC_DRV_X1205=mCONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not setCONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not setCONFIG_RTC_DRV_S35390A=mCONFIG_RTC_DRV_FM3130=mCONFIG_RTC_DRV_RX8581=mCONFIG_RTC_DRV_RX8025=m
#
# SPI RTC drivers
#CONFIG_RTC_DRV_M41T94=mCONFIG_RTC_DRV_DS1305=mCONFIG_RTC_DRV_DS1390=mCONFIG_RTC_DRV_MAX6902=m
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not setCONFIG_RTC_DRV_DS3234=m
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=mCONFIG_RTC_DRV_DS1286=mCONFIG_RTC_DRV_DS1511=mCONFIG_RTC_DRV_DS1553=mCONFIG_RTC_DRV_DS1742=mCONFIG_RTC_DRV_STK17TA8=mCONFIG_RTC_DRV_M48T86=mCONFIG_RTC_DRV_M48T35=mCONFIG_RTC_DRV_M48T59=mCONFIG_RTC_DRV_BQ4802=m
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_PCF50633 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not setCONFIG_AUXDISPLAY=y
# CONFIG_UIO is not set
#
# TI VLYNQ
#CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not setCONFIG_FUJITSU_LAPTOP=mCONFIG_FUJITSU_LAPTOP_DEBUG=yCONFIG_MSI_LAPTOP=yCONFIG_PANASONIC_LAPTOP=yCONFIG_COMPAL_LAPTOP=mCONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not setCONFIG_THINKPAD_ACPI_UNSAFE_LEDS=yCONFIG_THINKPAD_ACPI_VIDEO=y
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not setCONFIG_ACPI_ASUS=yCONFIG_ACPI_TOSHIBA=y
#
# Firmware Drivers
#
# CONFIG_EDD is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_EFI_VARS=yCONFIG_DELL_RBU=mCONFIG_DCDBAS=yCONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not setCONFIG_EXT2_FS_XIP=yCONFIG_EXT3_FS=yCONFIG_EXT3_DEFAULTS_TO_ORDERED=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not setCONFIG_FS_XIP=yCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not setCONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not setCONFIG_JFS_SECURITY=yCONFIG_JFS_DEBUG=yCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=mCONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not setCONFIG_XFS_DEBUG=yCONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not setCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not setCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=yCONFIG_AUTOFS4_FS=yCONFIG_FUSE_FS=yCONFIG_CUSE=yCONFIG_GENERIC_ACL=y
#
# Caches
#CONFIG_FSCACHE=mCONFIG_FSCACHE_STATS=yCONFIG_FSCACHE_HISTOGRAM=yCONFIG_FSCACHE_DEBUG=y
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not setCONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_VMCORE=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not setCONFIG_EXPORTFS=m
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not setCONFIG_ACORN_PARTITION_ICS=yCONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not setCONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not setCONFIG_AMIGA_PARTITION=yCONFIG_ATARI_PARTITION=yCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not setCONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not setCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=yCONFIG_SYSV68_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=mCONFIG_NLS_CODEPAGE_737=m
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not setCONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not setCONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not setCONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not setCONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not setCONFIG_NLS_CODEPAGE_869=mCONFIG_NLS_CODEPAGE_936=m
# CONFIG_NLS_CODEPAGE_950 is not setCONFIG_NLS_CODEPAGE_932=yCONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not setCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=yCONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not setCONFIG_NLS_ISO8859_5=mCONFIG_NLS_ISO8859_6=mCONFIG_NLS_ISO8859_7=m
# CONFIG_NLS_ISO8859_9 is not setCONFIG_NLS_ISO8859_13=m
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=yCONFIG_NLS_KOI8_R=m
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not setCONFIG_DLM=mCONFIG_DLM_DEBUG=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not setCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_SECTION_MISMATCH=yCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DETECT_SOFTLOCKUP=yCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=yCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not setCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=yCONFIG_DEBUG_OBJECTS=yCONFIG_DEBUG_OBJECTS_SELFTEST=y
# CONFIG_DEBUG_OBJECTS_FREE is not setCONFIG_DEBUG_OBJECTS_TIMERS=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1CONFIG_SLUB_DEBUG_ON=yCONFIG_SLUB_STATS=y
# CONFIG_DEBUG_KMEMLEAK is not setCONFIG_DEBUG_PREEMPT=yCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=yCONFIG_RT_MUTEX_TESTER=yCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not setCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=yCONFIG_DEBUG_LOCKDEP=yCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_DEBUG_LOCKING_API_SELFTESTS=yCONFIG_STACKTRACE=yCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VIRTUAL is not setCONFIG_DEBUG_WRITECOUNT=yCONFIG_DEBUG_MEMORY_INIT=yCONFIG_DEBUG_LIST=yCONFIG_DEBUG_SG=yCONFIG_DEBUG_NOTIFIERS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not setCONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_CPU_STALL_DETECTOR is not setCONFIG_BACKTRACE_SELF_TEST=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not setCONFIG_SYSCTL_SYSCALL_CHECK=yCONFIG_DEBUG_PAGEALLOC=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE_NMI_ENTER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_FTRACE_SYSCALLS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_FTRACE_NMI_ENTER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not setCONFIG_PREEMPT_TRACER=yCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=yCONFIG_FTRACE_SYSCALLS=yCONFIG_BOOT_TRACER=yCONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not setCONFIG_POWER_TRACER=yCONFIG_KSYM_TRACER=yCONFIG_PROFILE_KSYM_TRACER=yCONFIG_STACK_TRACER=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not setCONFIG_BLK_DEV_IO_TRACE=yCONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not setCONFIG_FTRACE_MCOUNT_RECORD=yCONFIG_FTRACE_SELFTEST=yCONFIG_FTRACE_STARTUP_TEST=yCONFIG_MMIOTRACE=yCONFIG_MMIOTRACE_TEST=mCONFIG_PROVIDE_OHCI1394_DMA_INIT=yCONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not setCONFIG_SAMPLES=yCONFIG_SAMPLE_MARKERS=mCONFIG_SAMPLE_TRACEPOINTS=m
# CONFIG_SAMPLE_TRACE_EVENTS is not set
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not setCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not setCONFIG_KGDB_TESTS=yCONFIG_HAVE_ARCH_KMEMCHECK=yCONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not setCONFIG_EARLY_PRINTK=yCONFIG_EARLY_PRINTK_DBGP=yCONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not setCONFIG_DEBUG_PER_CPU_MAPS=yCONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not setCONFIG_IOMMU_STRESS=yCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not setCONFIG_IO_DELAY_NONE=yCONFIG_DEFAULT_IO_DELAY_TYPE=3CONFIG_DEBUG_BOOT_PARAMS=yCONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not setCONFIG_SECURITY=yCONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not setCONFIG_SECURITY_PATH=yCONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_TOMOYO is not setCONFIG_IMA=yCONFIG_IMA_MEASURE_PCR_IDX=10CONFIG_IMA_AUDIT=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not setCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=mCONFIG_CRYPTO_AUTHENC=yCONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not setCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not setCONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=y
#
# Digest
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=yCONFIG_CRYPTO_RMD128=mCONFIG_CRYPTO_RMD160=y
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not setCONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not setCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAST5=yCONFIG_CRYPTO_CAST6=yCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_SALSA20=mCONFIG_CRYPTO_SALSA20_X86_64=yCONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_X86_64=m
#
# Compression
#CONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_ZLIB=yCONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not setCONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not setCONFIG_CRYPTO_DEV_HIFN_795X=y
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not setCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=y
# CONFIG_VIRTUALIZATION is not setCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=mCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=mCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_CPUMASK_OFFSTACK=yCONFIG_NLATTR=yCONFIG_FORCE_SUCCESSFUL_BUILD=yCONFIG_FORCE_MINIMAL_CONFIG=yCONFIG_FORCE_MINIMAL_CONFIG_64=yCONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
Quoted 7 lines · Ingo Molnar
FYI, -tip testing found a new build warning on SH caused by the RCU tree (i suspect this warning triggers on other architectures as well):
/home/mingo/tip/kernel/rcutree.c:88: warning: '__rcu_offline_cpu' declared 'static' but never defined
<red face>
Quoted 3 lines
it's harmless, but since we are generally trying to fix all warnings and gravitate towards more and more -Werror subsystems, it would be nice to fix this.
Indeed, and I have updated my build-output-check script to alert me to warning messages from my multiple-configuration test runs. Please see below for patch.
Thanx, Paul
------------------------------------------------------------------------
Add #ifdef to suppress __rcu_offline_cpu() warning in !HOTPLUG_CPU builds
---
rcutree.c | 2 ++ 1 file changed, 2 insertions(+)
kernel/rcutree.c +2 -0
@@ -84,7 +84,9 @@ extern long rcu_batches_completed_sched(void);static void cpu_quiet_msk (unsigned long mask,struct rcu_state *rsp,struct rcu_node *rnp,unsigned long flags);static void cpu_quiet_msk_finish (struct rcu_state *rsp,unsigned long flags); +#ifdef CONFIG_HOTPLUG_CPU static void __rcu_offline_cpu (int cpu,struct rcu_state *rsp); +#endif /* #ifdef CONFIG_HOTPLUG_CPU */ static void __rcu_process_callbacks (struct rcu_state *rsp,struct rcu_data *rdp); static void __call_rcu(struct rcu_head *head,
Quoted 8 lines · Ingo Molnar
btw., i'm still seeing crashes with the latest RCU bits:
[ 20.621740] Testing event sys_enter_futex: OK [ 20.629738] Testing event sys_exit_futex: OK [ 20.637737] Testing event lock_acquire: [reboot]Possibly due to infinite recursion as well. Config attached.
Color me confused...
Unless someone has a better idea, I will send in a patch that adds "notrace" to every RCU API member used by any file in the kernel that has "trace" in its name (excluding ptrace.c and rcutree_trace.c, of course). This list is as follows:
call_rcu() call_rcu_sched() rcu_read_lock() rcu_read_unlock()
So, any better ideas?
Thanx, Paul
Quoted 17 lines · * Paul E. McKenney ([email protected]) wrote:
Quoted 8 lines · Ingo Molnar
btw., i'm still seeing crashes with the latest RCU bits:
[ 20.621740] Testing event sys_enter_futex: OK [ 20.629738] Testing event sys_exit_futex: OK [ 20.637737] Testing event lock_acquire: [reboot]Possibly due to infinite recursion as well. Config attached.
Color me confused...
Unless someone has a better idea, I will send in a patch that adds "notrace" to every RCU API member used by any file in the kernel that has "trace" in its name (excluding
ptrace.candrcutree_trace.c, of course). This list is as follows:
Quoted 6 lines
call_rcu() call_rcu_sched() rcu_read_lock() rcu_read_unlock()So, any better ideas?
Tracers using RCU should use the _notrace() version of read_lock/unlock. I think the callers should be fixed rather than RCU.
Tracepoints have been designed to use the _notrace variant on the instrumentation site. The core of tracepoint management use call_rcu_sched(), which can be traced without any problem.
I have not followed the late tracing development as closely though, so errors might have crept in.
Mathieu
Quoted 2 lines
Thanx, Paul
Signature · 2 lines
Mathieu Desnoyers OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
Quoted 28 lines · Mathieu Desnoyers
Quoted 17 lines · * Paul E. McKenney ([email protected]) wrote:
Quoted 8 lines · Ingo Molnar
btw., i'm still seeing crashes with the latest RCU bits:
[ 20.621740] Testing event sys_enter_futex: OK [ 20.629738] Testing event sys_exit_futex: OK [ 20.637737] Testing event lock_acquire: [reboot]Possibly due to infinite recursion as well. Config attached.
Color me confused...
Unless someone has a better idea, I will send in a patch that adds "notrace" to every RCU API member used by any file in the kernel that has "trace" in its name (excluding
ptrace.candrcutree_trace.c, of course). This list is as follows:Quoted 6 lines
call_rcu() call_rcu_sched() rcu_read_lock() rcu_read_unlock()So, any better ideas?
Tracers using RCU should use the
_notrace()version of read_lock/unlock. I think the callers should be fixed rather than RCU.
Quoted 6 lines
Tracepoints have been designed to use the
_notracevariant on the instrumentation site. The core of tracepoint management usecall_rcu_sched(), which can be traced without any problem.I have not followed the late tracing development as closely though, so errors might have crept in.
Or I might have inadvertently broken something in a non-obvious (to me, anyway) manner.
So, would you be willing to look at commit bc33f24bd in the -tip tree and see if there is anything I broke other than the now-fixed rcu_read_lock_sched_notrace() and rcu_read_unlock_sched_notrace()? And for that matter, whether my alleged fix for these two API members really does fix the problem (-tip commit 7c614d6461)?
The -tip tree is at:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git
And these patches are on the tip/core/rcu branch.
Thanx, Paul
Quoted 45 lines · * Paul E. McKenney ([email protected]) wrote:
Quoted 28 lines · Mathieu Desnoyers
Quoted 17 lines · * Paul E. McKenney ([email protected]) wrote:
Quoted 8 lines · Ingo Molnar
btw., i'm still seeing crashes with the latest RCU bits:
[ 20.621740] Testing event sys_enter_futex: OK [ 20.629738] Testing event sys_exit_futex: OK [ 20.637737] Testing event lock_acquire: [reboot]Possibly due to infinite recursion as well. Config attached.
Color me confused...
Unless someone has a better idea, I will send in a patch that adds "notrace" to every RCU API member used by any file in the kernel that has "trace" in its name (excluding
ptrace.candrcutree_trace.c, of course). This list is as follows:Quoted 6 lines
call_rcu() call_rcu_sched() rcu_read_lock() rcu_read_unlock()So, any better ideas?
Tracers using RCU should use the
_notrace()version of read_lock/unlock. I think the callers should be fixed rather than RCU.Quoted 6 lines
Tracepoints have been designed to use the
_notracevariant on the instrumentation site. The core of tracepoint management usecall_rcu_sched(), which can be traced without any problem.I have not followed the late tracing development as closely though, so errors might have crept in.
Or I might have inadvertently broken something in a non-obvious (to me, anyway) manner.
So, would you be willing to look at commit
bc33f24bdin the -tip tree and see if there is anything I broke other than the now-fixedrcu_read_lock_sched_notrace()andrcu_read_unlock_sched_notrace()? And for that matter, whether my alleged fix for these two API members really does fix the problem (-tip commit7c614d6461)?
Quoted 6 lines
The -tip tree is at:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.gitAnd these patches are on the tip/core/rcu branch.
sure, here we go:
static inline void rcu_read_lock_sched_notrace(void)
{
preempt_disable_notrace();+ __acquire(RCU_SCHED);
+ rcu_read_acquire();
}
and
static inline void rcu_read_unlock_sched_notrace(void) {
+ rcu_read_release();
+ __release(RCU_SCHED);
preempt_enable_notrace();}
will make those _notrace primitives call into lockdep. I don't think this is correct, and this might be causing your problem.
rcu_read_acquire/release are calling lock_acquire/release, those should be removed.
__acquire() simply seems to be defined to a gcc "context" attribute, probably for the sparse checker. I think it should be safe to leave them there.
Mathieu
Quoted 1 line
Thanx, Paul
Signature · 2 lines
Mathieu Desnoyers OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
Quoted 11 lines · Paul E. McKenney
Quoted 7 lines · Ingo Molnar
FYI, -tip testing found a new build warning on SH caused by the RCU tree (i suspect this warning triggers on other architectures as well):
/home/mingo/tip/kernel/rcutree.c:88: warning: '__rcu_offline_cpu' declared 'static' but never defined<red face>
Quoted 7 lines
Quoted 3 lines
it's harmless, but since we are generally trying to fix all warnings and gravitate towards more and more -Werror subsystems, it would be nice to fix this.
Indeed, and I have updated my build-output-check script to alert me to warning messages from my multiple-configuration test runs. Please see below for patch.
btw., you can unset CONFIG_ALLOW_WARNINGS in -tip kernels to turn build warnings into build failures - and those are harder to miss.
Ingo
[tip:core/rcu] rcu: Add #ifdef to suppress __rcu_offline_cpu() warning in !HOTPLUG_CPU builds
In reply to Paul E. McKenneyCommit-ID: c935a331c8f569c7903ed26a3994a70cbea1802e Gitweb: http://git.kernel.org/tip/c935a331c8f569c7903ed26a3994a70cbea1802e Author: Paul E. McKenney <[email protected]> AuthorDate: Tue, 25 Aug 2009 08:40:25 -0700 Committer: Ingo Molnar <[email protected]> CommitDate: Tue, 25 Aug 2009 20:20:03 +0200
rcu: Add #ifdef to suppress __rcu_offline_cpu() warning in !HOTPLUG_CPU builds
LKML-Reference: <[email protected]>
--- kernel/rcutree.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
kernel/rcutree.c +2 -0
@@ -84,7 +84,9 @@ extern long rcu_batches_completed_sched(void);static void cpu_quiet_msk (unsigned long mask,struct rcu_state *rsp,struct rcu_node *rnp,unsigned long flags);static void cpu_quiet_msk_finish (struct rcu_state *rsp,unsigned long flags); +#ifdef CONFIG_HOTPLUG_CPU static void __rcu_offline_cpu (int cpu,struct rcu_state *rsp); +#endif /* #ifdef CONFIG_HOTPLUG_CPU */ static void __rcu_process_callbacks (struct rcu_state *rsp,struct rcu_data *rdp); static void __call_rcu(struct rcu_head *head,
Quoted 75 lines · Mathieu Desnoyers
Quoted 45 lines · * Paul E. McKenney ([email protected]) wrote:
Quoted 28 lines · Mathieu Desnoyers
Quoted 17 lines · * Paul E. McKenney ([email protected]) wrote:
Quoted 8 lines · Ingo Molnar
btw., i'm still seeing crashes with the latest RCU bits:
[ 20.621740] Testing event sys_enter_futex: OK [ 20.629738] Testing event sys_exit_futex: OK [ 20.637737] Testing event lock_acquire: [reboot]Possibly due to infinite recursion as well. Config attached.
Color me confused...
Unless someone has a better idea, I will send in a patch that adds "notrace" to every RCU API member used by any file in the kernel that has "trace" in its name (excluding
ptrace.candrcutree_trace.c, of course). This list is as follows:Quoted 6 lines
call_rcu() call_rcu_sched() rcu_read_lock() rcu_read_unlock()So, any better ideas?
Tracers using RCU should use the
_notrace()version of read_lock/unlock. I think the callers should be fixed rather than RCU.Quoted 6 lines
Tracepoints have been designed to use the
_notracevariant on the instrumentation site. The core of tracepoint management usecall_rcu_sched(), which can be traced without any problem.I have not followed the late tracing development as closely though, so errors might have crept in.
Or I might have inadvertently broken something in a non-obvious (to me, anyway) manner.
So, would you be willing to look at commit
bc33f24bdin the -tip tree and see if there is anything I broke other than the now-fixedrcu_read_lock_sched_notrace()andrcu_read_unlock_sched_notrace()? And for that matter, whether my alleged fix for these two API members really does fix the problem (-tip commit7c614d6461)?Quoted 6 lines
The -tip tree is at:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.gitAnd these patches are on the tip/core/rcu branch.
sure, here we go:
static inline void
rcu_read_lock_sched_notrace(void){ preempt_disable_notrace();(quoted diff) +2
-0+ __acquire(RCU_SCHED); + rcu_read_acquire(); }and
static inline void
rcu_read_unlock_sched_notrace(void){(quoted diff) +2
-0+ rcu_read_release(); + __release(RCU_SCHED); preempt_enable_notrace(); }will make those
_notraceprimitives call into lockdep. I don't think this is correct, and this might be causing your problem.
Quoted 6 lines
rcu_read_acquire/release are calling lock_acquire/release, those should be removed.
__acquire()simply seems to be defined to a gcc "context" attribute, probably for the sparse checker. I think it should be safe to leave them there.
Thank you for looking this over, Mathieu!!! Please see below for patch.
Thanx, Paul
------------------------------------------------------------------------
Remove lockdep annotations from RCU's _notrace() API members.
The lockdep annotations rcu_read_acquire() and rcu_read_release() might lead to infinite looping if called from lockdep. So this patch removes them.
rcupdate.h | 2 -- 1 file changed, 2 deletions(-)
include/linux/rcupdate.h +0 -2
@@ -195,7 +195,6 @@ static inline notrace void rcu_read_lock_sched_notrace(void) {preempt_disable_notrace ();__acquire (RCU_SCHED ); -rcu_read_acquire (); }/*
@@ -211,7 +210,6 @@ static inline void rcu_read_unlock_sched(void) } static inline notrace void rcu_read_unlock_sched_notrace(void) { -rcu_read_release ();__release (RCU_SCHED );preempt_enable_notrace (); }
Quoted 18 lines · Ingo Molnar
Quoted 15 lines · Paul E. McKenney
Quoted 7 lines · Ingo Molnar
FYI, -tip testing found a new build warning on SH caused by the RCU tree (i suspect this warning triggers on other architectures as well):
/home/mingo/tip/kernel/rcutree.c:88: warning: '__rcu_offline_cpu' declared 'static' but never defined<red face>
Quoted 3 lines
it's harmless, but since we are generally trying to fix all warnings and gravitate towards more and more -Werror subsystems, it would be nice to fix this.
Quoted 6 lines
Quoted 3 lines
Indeed, and I have updated my build-output-check script to alert me to warning messages from my multiple-configuration test runs. Please see below for patch.
btw., you can unset
CONFIG_ALLOW_WARNINGSin -tip kernels to turn build warnings into build failures - and those are harder to miss.
Thank you for the tip!!!
Thanx, Paul
Lai Jiangshan
Reviewed-byQuoted 111 lines · Paul E. McKenney
Quoted 70 lines · Mathieu Desnoyers
Quoted 41 lines · * Paul E. McKenney ([email protected]) wrote:
Quoted 25 lines · Mathieu Desnoyers
Quoted 15 lines · * Paul E. McKenney ([email protected]) wrote:
Quoted 7 lines · Ingo Molnar
btw., i'm still seeing crashes with the latest RCU bits:
[ 20.621740] Testing event sys_enter_futex: OK [ 20.629738] Testing event sys_exit_futex: OK [ 20.637737] Testing event lock_acquire: [reboot]Possibly due to infinite recursion as well. Config attached.
Color me confused...
Unless someone has a better idea, I will send in a patch that adds "notrace" to every RCU API member used by any file in the kernel that has "trace" in its name (excluding
ptrace.candrcutree_trace.c, of course). This list is as follows:Quoted 6 lines
call_rcu() call_rcu_sched() rcu_read_lock() rcu_read_unlock()So, any better ideas?
Tracers using RCU should use the
_notrace()version of read_lock/unlock. I think the callers should be fixed rather than RCU.Quoted 6 lines
Tracepoints have been designed to use the
_notracevariant on the instrumentation site. The core of tracepoint management usecall_rcu_sched(), which can be traced without any problem.I have not followed the late tracing development as closely though, so errors might have crept in.
Or I might have inadvertently broken something in a non-obvious (to me, anyway) manner.
So, would you be willing to look at commit
bc33f24bdin the -tip tree and see if there is anything I broke other than the now-fixedrcu_read_lock_sched_notrace()andrcu_read_unlock_sched_notrace()? And for that matter, whether my alleged fix for these two API members really does fix the problem (-tip commit7c614d6461)?Quoted 6 lines
The -tip tree is at:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.gitAnd these patches are on the tip/core/rcu branch.
sure, here we go:
static inline void
rcu_read_lock_sched_notrace(void){ preempt_disable_notrace();(quoted diff) +2
-0+ __acquire(RCU_SCHED); + rcu_read_acquire(); }and
static inline void
rcu_read_unlock_sched_notrace(void){include/linux/rcupdate.h +2
-0+rcu_read_release (); +__release (RCU_SCHED );preempt_enable_notrace (); }will make those
_notraceprimitives call into lockdep. I don't think this is correct, and this might be causing your problem.Quoted 6 lines
rcu_read_acquire/release are calling lock_acquire/release, those should be removed.
__acquire()simply seems to be defined to a gcc "context" attribute, probably for the sparse checker. I think it should be safe to leave them there.Thank you for looking this over, Mathieu!!! Please see below for patch.
Thanx, Paul
------------------------------------------------------------------------
Remove lockdep annotations from RCU's
_notrace()API members.The lockdep annotations
rcu_read_acquire()andrcu_read_release()might lead to infinite looping if called from lockdep. So this patch removes them.Suggested-by Mathieu Desnoyers <[email protected]>Signed-off-by Paul E. McKenney <[email protected]>rcupdate.h | 2 -- 1 file changed, 2 deletions(-)include/linux/rcupdate.h +0
-1@@ -195,7 +195,6 @@ static inline notrace void rcu_read_lock_sched_notrace(void) {preempt_disable_notrace ();__acquire (RCU_SCHED ); -rcu_read_acquire (); }/*
include/linux/rcupdate.h static inline void rcu_read_unlock_sched(void) · line 215
Quoted 7 lines
include/linux/rcupdate.h +0
-1@@ -211,7 +210,6 @@ static inline void rcu_read_unlock_sched(void) } static inline notrace void rcu_read_unlock_sched_notrace(void) { -rcu_read_release ();__release (RCU_SCHED );preempt_enable_notrace (); }
I remembered I have suggested this ...
Quoted 15 lines · Lai Jiangshan
include/linux/rcupdate.h static inline notrace void rcu_read_lock_sched_notrace(void) · line 198
Quoted 7 lines
{
include/linux/rcupdate.h +2
-0preempt_disable_notrace (); +__acquire (RCU_SCHED ); +rcu_read_acquire (); }It may cause infinity recursion.
rcu_read_acquire()callsrcu_read_lock_sched_notrace()beforecurrent->lockdep_recursionis set to 1 when tracing in on, thus infinity recursion occurs.Lai
Quoted 108 lines · Lai Jiangshan
Quoted 107 lines · Paul E. McKenney
Quoted 70 lines · Mathieu Desnoyers
Quoted 41 lines · * Paul E. McKenney ([email protected]) wrote:
Quoted 25 lines · Mathieu Desnoyers
Quoted 15 lines · * Paul E. McKenney ([email protected]) wrote:
Quoted 7 lines · Ingo Molnar
btw., i'm still seeing crashes with the latest RCU bits:
[ 20.621740] Testing event sys_enter_futex: OK [ 20.629738] Testing event sys_exit_futex: OK [ 20.637737] Testing event lock_acquire: [reboot]Possibly due to infinite recursion as well. Config attached.
Color me confused...
Unless someone has a better idea, I will send in a patch that adds "notrace" to every RCU API member used by any file in the kernel that has "trace" in its name (excluding
ptrace.candrcutree_trace.c, of course). This list is as follows:Quoted 6 lines
call_rcu() call_rcu_sched() rcu_read_lock() rcu_read_unlock()So, any better ideas?
Tracers using RCU should use the
_notrace()version of read_lock/unlock. I think the callers should be fixed rather than RCU.Quoted 6 lines
Tracepoints have been designed to use the
_notracevariant on the instrumentation site. The core of tracepoint management usecall_rcu_sched(), which can be traced without any problem.I have not followed the late tracing development as closely though, so errors might have crept in.
Or I might have inadvertently broken something in a non-obvious (to me, anyway) manner.
So, would you be willing to look at commit
bc33f24bdin the -tip tree and see if there is anything I broke other than the now-fixedrcu_read_lock_sched_notrace()andrcu_read_unlock_sched_notrace()? And for that matter, whether my alleged fix for these two API members really does fix the problem (-tip commit7c614d6461)?Quoted 6 lines
The -tip tree is at:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.gitAnd these patches are on the tip/core/rcu branch.
sure, here we go:
static inline void
rcu_read_lock_sched_notrace(void){ preempt_disable_notrace();(quoted diff) +2
-0+ __acquire(RCU_SCHED); + rcu_read_acquire(); }and
static inline void
rcu_read_unlock_sched_notrace(void){include/linux/rcupdate.h +2
-0+rcu_read_release (); +__release (RCU_SCHED );preempt_enable_notrace (); }will make those
_notraceprimitives call into lockdep. I don't think this is correct, and this might be causing your problem.Quoted 6 lines
rcu_read_acquire/release are calling lock_acquire/release, those should be removed.
__acquire()simply seems to be defined to a gcc "context" attribute, probably for the sparse checker. I think it should be safe to leave them there.Thank you for looking this over, Mathieu!!! Please see below for patch.
Thanx, Paul
------------------------------------------------------------------------
Remove lockdep annotations from RCU's
_notrace()API members.The lockdep annotations
rcu_read_acquire()andrcu_read_release()might lead to infinite looping if called from lockdep. So this patch removes them.Suggested-by Mathieu Desnoyers <[email protected]>Signed-off-by Paul E. McKenney <[email protected]>rcupdate.h | 2 -- 1 file changed, 2 deletions(-)include/linux/rcupdate.h +0
-1@@ -195,7 +195,6 @@ static inline notrace void rcu_read_lock_sched_notrace(void) {preempt_disable_notrace ();__acquire (RCU_SCHED ); -rcu_read_acquire (); }
Quoted 11 lines
include/linux/rcupdate.h static inline void rcu_read_unlock_sched(void) · line 215
Quoted 9 lines
include/linux/rcupdate.h +0
-1/* @@ -211,7 +210,6 @@ static inline void rcu_read_unlock_sched(void) } static inline notrace void rcu_read_unlock_sched_notrace(void) { -rcu_read_release ();__release (RCU_SCHED );preempt_enable_notrace (); }I remembered I have suggested this ...
Ah!!! I understood the "add notrace" suggestion, but was confused into thinking that "notrace" was going to prevent it from being called the second time.
Quoted 1 line
Reviewed-by Lai Jiangshan <[email protected]>
Thank you!!!
Thanx, Paul
Quoted 18 lines
Quoted 15 lines · Lai Jiangshan
include/linux/rcupdate.h static inline notrace void rcu_read_lock_sched_notrace(void) · line 198
Quoted 7 lines
{
include/linux/rcupdate.h +2
-0preempt_disable_notrace (); +__acquire (RCU_SCHED ); +rcu_read_acquire (); }It may cause infinity recursion.
rcu_read_acquire()callsrcu_read_lock_sched_notrace()beforecurrent->lockdep_recursionis set to 1 when tracing in on, thus infinity recursion occurs.Lai