sata exception frozen timeout?
I've recently started seeing the following messages from a new WD Green drive, not long after I had to RMA a Seagate drive for a strange (but different) error. Highlights from my dmesg include:
[59634.792101] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[59634.792121] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[59634.792125] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4
(timeout)
[59634.792133] ata6.00: status: { DRDY }
[59634.792145] ata6: hard resetting link
[59635.277695] ata6: softreset failed (device not ready)
[59635.277705] ata6: failed due to HW bug, retry pmp=0
[59635.441570] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[59635.454030] ata6.00: configured for UDMA/133
[59635.454068] ata6: EH complete
...
[59713.792224] ata6.00: NCQ disabled due to excessive errors
[59713.792236] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[59713.792254] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[59713.792257] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[59713.792264] ata6.00: status: { DRDY }
...
[63484.781764] ata6: hard resetting link
[63485.264204] ata6: softreset failed (device not ready)
[63485.264214] ata6: failed due to HW bug, retry pmp=0
[63485.428205] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[63485.440499] ata6.00: configured for UDMA/100
[63485.440536] ata6: EH complete
[63493.780182] ata6.00: limiting speed to UDMA/33:PIO4
[63493.780194] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[63493.780211] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[63493.780214] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[63493.780221] ata6.00: status: { DRDY }
...
[99318.070669] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[99318.070679] ata6.00: irq_stat 0x40000001
[99318.070698] ata6.00: cmd 25/00:00:30:bd:01/00:01:1b:00:00/e0 tag 0 dma
131072 in
[99318.070701] res 41/04:ef:30:bd:01/00:00:1b:00:00/e0 Emask 0x1
(device error)
[99318.070709] ata6.00: status: { DRDY ERR }
[99318.070714] ata6.00: error: { ABRT }
[99318.082588] ata6.00: configured for UDMA/33
[99318.082612] ata6: EH complete
...
[99339.780358] ata6: hard resetting link
[99349.785096] ata6: softreset failed (device not ready)
[99349.785108] ata6: hard resetting link
[99359.789033] ata6: softreset failed (device not ready)
[99359.789045] ata6: hard resetting link
[99370.352916] ata6: link is slow to respond, please be patient (ready=0)
..
[99400.016925] ata6: softreset failed (device not ready)
[99400.016936] ata6: reset failed, giving up
[99400.016942] ata6.00: disabled
[99400.016986] ata6: EH complete
[99400.017021] sd 5:0:0:0: [sdf] Unhandled error code
[99400.017026] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[99400.017021] sd 5:0:0:0: [sdf] Unhandled error code
[99400.017026] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[99400.017035] end_request: I/O error, dev sdf, sector 453099568
[99400.017045] Buffer I/O error on device md1, logical block 113274390
[99400.017058] Buffer I/O error on device md1, logical block 113274391
[99400.017064] Buffer I/O error on device md1, logical block 113274392
[99400.017070] Buffer I/O error on device md1, logical block 113274393
[99400.017076] Buffer I/O error on device md1, logical block 113274394
[99400.017082] Buffer I/O error on device md1, logical block 113274395
[99400.017088] Buffer I/O error on device md1, logical block 113274396
[99400.017094] Buffer I/O error on device md1, logical block 113274397
[99400.017100] Buffer I/O error on device md1, logical block 113274398
[99400.017106] Buffer I/O error on device md1, logical block 113274399
[99400.017115] sd 5:0:0:0: [sdf] Unhandled error code
[99400.017123] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[99400.017133] end_request: I/O error, dev sdf, sector 453099824
[99400.017310] sd 5:0:0:0: [sdf] Unhandled error code
[99400.017315] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[99400.017322] end_request: I/O error, dev sdf, sector 453099568
[99400.017383] program smartctl is using a deprecated SCSI ioctl, please
convert it to SG_IO
[99400.017456] program smartctl is using a deprecated SCSI ioctl, please
convert it to SG_IO
[99400.018822] sd 5:0:0:0: [sdf] Unhandled error code
[99400.018829] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[99400.018838] end_request: I/O error, dev sdf, sector 453099568and a bunch more end_request errors. This happens fairly reliably after a day or so of being online. I try and start to play some music or watch a video off the array (2xWD Green on md raid0) and it fails. The file system is mostly read only right now (that is I don't write to it) so I haven't manged to loose any data that I know of, and the fs seems to be fine. A reboot fixes the errors and the disk and fs work fine for a day or two before these errors show up again.
I'm currently running 2.6.31-rc5 from kernel.org. What would cause these errors?
Signature · 2 lines
Thomas Fjellstrom [email protected]
Quoted 103 lines · Thomas Fjellstrom
I've recently started seeing the following messages from a new WD Green drive, not long after I had to RMA a Seagate drive for a strange (but different) error. Highlights from my dmesg include:
[59634.792101] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [59634.792121] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [59634.792125] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [59634.792133] ata6.00: status: { DRDY } [59634.792145] ata6: hard resetting link [59635.277695] ata6: softreset failed (device not ready) [59635.277705] ata6: failed due to HW bug, retry pmp=0 [59635.441570] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [59635.454030] ata6.00: configured for UDMA/133 [59635.454068] ata6: EH complete ... [59713.792224] ata6.00: NCQ disabled due to excessive errors [59713.792236] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [59713.792254] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [59713.792257] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [59713.792264] ata6.00: status: { DRDY } ... [63484.781764] ata6: hard resetting link [63485.264204] ata6: softreset failed (device not ready) [63485.264214] ata6: failed due to HW bug, retry pmp=0 [63485.428205] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [63485.440499] ata6.00: configured for UDMA/100 [63485.440536] ata6: EH complete [63493.780182] ata6.00: limiting speed to UDMA/33:PIO4 [63493.780194] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [63493.780211] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [63493.780214] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [63493.780221] ata6.00: status: { DRDY } ... [99318.070669] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [99318.070679] ata6.00: irq_stat 0x40000001 [99318.070698] ata6.00: cmd 25/00:00:30:bd:01/00:01:1b:00:00/e0 tag 0 dma 131072 in [99318.070701] res 41/04:ef:30:bd:01/00:00:1b:00:00/e0 Emask 0x1 (device error) [99318.070709] ata6.00: status: { DRDY ERR } [99318.070714] ata6.00: error: { ABRT } [99318.082588] ata6.00: configured for UDMA/33 [99318.082612] ata6: EH complete ... [99339.780358] ata6: hard resetting link [99349.785096] ata6: softreset failed (device not ready) [99349.785108] ata6: hard resetting link [99359.789033] ata6: softreset failed (device not ready) [99359.789045] ata6: hard resetting link [99370.352916] ata6: link is slow to respond, please be patient (ready=0) .. [99400.016925] ata6: softreset failed (device not ready) [99400.016936] ata6: reset failed, giving up [99400.016942] ata6.00: disabled [99400.016986] ata6: EH complete [99400.017021] sd 5:0:0:0: [sdf] Unhandled error code [99400.017026] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017021] sd 5:0:0:0: [sdf] Unhandled error code [99400.017026] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017035] end_request: I/O error, dev sdf, sector 453099568 [99400.017045] Buffer I/O error on device md1, logical block 113274390 [99400.017058] Buffer I/O error on device md1, logical block 113274391 [99400.017064] Buffer I/O error on device md1, logical block 113274392 [99400.017070] Buffer I/O error on device md1, logical block 113274393 [99400.017076] Buffer I/O error on device md1, logical block 113274394 [99400.017082] Buffer I/O error on device md1, logical block 113274395 [99400.017088] Buffer I/O error on device md1, logical block 113274396 [99400.017094] Buffer I/O error on device md1, logical block 113274397 [99400.017100] Buffer I/O error on device md1, logical block 113274398 [99400.017106] Buffer I/O error on device md1, logical block 113274399 [99400.017115] sd 5:0:0:0: [sdf] Unhandled error code [99400.017123] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017133] end_request: I/O error, dev sdf, sector 453099824 [99400.017310] sd 5:0:0:0: [sdf] Unhandled error code [99400.017315] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017322] end_request: I/O error, dev sdf, sector 453099568 [99400.017383] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [99400.017456] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [99400.018822] sd 5:0:0:0: [sdf] Unhandled error code [99400.018829] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.018838] end_request: I/O error, dev sdf, sector 453099568and a bunch more
end_requesterrors. This happens fairly reliably after a day or so of being online. I try and start to play some music or watch a video off the array (2xWD Green on md raid0) and it fails. The file system is mostly read only right now (that is I don't write to it) so I haven't manged to loose any data that I know of, and the fs seems to be fine. A reboot fixes the errors and the disk and fs work fine for a day or two before these errors show up again.
Quoted 2 lines
I'm currently running 2.6.31-rc5 from kernel.org. What would cause these errors?
It's now happened again after only 30 minutes or so. I'm trying with an older kernel (debian's 2.6.30-6 from sid) now. So far so good.
Signature · 2 lines
Thomas Fjellstrom [email protected]
Quoted 104 lines · Thomas Fjellstrom
Quoted 103 lines · Thomas Fjellstrom
I've recently started seeing the following messages from a new WD Green drive, not long after I had to RMA a Seagate drive for a strange (but different) error. Highlights from my dmesg include:
[59634.792101] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [59634.792121] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [59634.792125] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [59634.792133] ata6.00: status: { DRDY } [59634.792145] ata6: hard resetting link [59635.277695] ata6: softreset failed (device not ready) [59635.277705] ata6: failed due to HW bug, retry pmp=0 [59635.441570] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [59635.454030] ata6.00: configured for UDMA/133 [59635.454068] ata6: EH complete ... [59713.792224] ata6.00: NCQ disabled due to excessive errors [59713.792236] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [59713.792254] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [59713.792257] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [59713.792264] ata6.00: status: { DRDY } ... [63484.781764] ata6: hard resetting link [63485.264204] ata6: softreset failed (device not ready) [63485.264214] ata6: failed due to HW bug, retry pmp=0 [63485.428205] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [63485.440499] ata6.00: configured for UDMA/100 [63485.440536] ata6: EH complete [63493.780182] ata6.00: limiting speed to UDMA/33:PIO4 [63493.780194] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [63493.780211] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [63493.780214] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [63493.780221] ata6.00: status: { DRDY } ... [99318.070669] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [99318.070679] ata6.00: irq_stat 0x40000001 [99318.070698] ata6.00: cmd 25/00:00:30:bd:01/00:01:1b:00:00/e0 tag 0 dma 131072 in [99318.070701] res 41/04:ef:30:bd:01/00:00:1b:00:00/e0 Emask 0x1 (device error) [99318.070709] ata6.00: status: { DRDY ERR } [99318.070714] ata6.00: error: { ABRT } [99318.082588] ata6.00: configured for UDMA/33 [99318.082612] ata6: EH complete ... [99339.780358] ata6: hard resetting link [99349.785096] ata6: softreset failed (device not ready) [99349.785108] ata6: hard resetting link [99359.789033] ata6: softreset failed (device not ready) [99359.789045] ata6: hard resetting link [99370.352916] ata6: link is slow to respond, please be patient (ready=0) .. [99400.016925] ata6: softreset failed (device not ready) [99400.016936] ata6: reset failed, giving up [99400.016942] ata6.00: disabled [99400.016986] ata6: EH complete [99400.017021] sd 5:0:0:0: [sdf] Unhandled error code [99400.017026] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017021] sd 5:0:0:0: [sdf] Unhandled error code [99400.017026] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017035] end_request: I/O error, dev sdf, sector 453099568 [99400.017045] Buffer I/O error on device md1, logical block 113274390 [99400.017058] Buffer I/O error on device md1, logical block 113274391 [99400.017064] Buffer I/O error on device md1, logical block 113274392 [99400.017070] Buffer I/O error on device md1, logical block 113274393 [99400.017076] Buffer I/O error on device md1, logical block 113274394 [99400.017082] Buffer I/O error on device md1, logical block 113274395 [99400.017088] Buffer I/O error on device md1, logical block 113274396 [99400.017094] Buffer I/O error on device md1, logical block 113274397 [99400.017100] Buffer I/O error on device md1, logical block 113274398 [99400.017106] Buffer I/O error on device md1, logical block 113274399 [99400.017115] sd 5:0:0:0: [sdf] Unhandled error code [99400.017123] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017133] end_request: I/O error, dev sdf, sector 453099824 [99400.017310] sd 5:0:0:0: [sdf] Unhandled error code [99400.017315] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017322] end_request: I/O error, dev sdf, sector 453099568 [99400.017383] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [99400.017456] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [99400.018822] sd 5:0:0:0: [sdf] Unhandled error code [99400.018829] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.018838] end_request: I/O error, dev sdf, sector 453099568and a bunch more
end_requesterrors. This happens fairly reliably after a day or so of being online. I try and start to play some music or watch a video off the array (2xWD Green on md raid0) and it fails. The file system is mostly read only right now (that is I don't write to it) so I haven't manged to loose any data that I know of, and the fs seems to be fine. A reboot fixes the errors and the disk and fs work fine for a day or two before these errors show up again.
Quoted 5 lines
Quoted 2 lines
I'm currently running 2.6.31-rc5 from kernel.org. What would cause these errors?
It's now happened again after only 30 minutes or so. I'm trying with an older kernel (debian's 2.6.30-6 from sid) now. So far so good.
Lasted a whole half a day this time:
[29461.780188] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[29461.780208] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[29461.780211] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4
(timeout)
[29461.780219] ata8.00: status: { DRDY }
[29461.780230] ata8: hard resetting link
[29462.264190] ata8: softreset failed (device not ready)
[29462.264198] ata8: failed due to HW bug, retry pmp=0
[29462.428205] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[29462.440501] ata8.00: configured for UDMA/133
[29462.440541] ata8: EH complete
[29469.780184] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[29469.780204] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[29469.780207] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[29469.780215] ata8.00: status: { DRDY }
[29469.780227] ata8: hard resetting link
[29470.264245] ata8: softreset failed (device not ready)
[29470.264254] ata8: failed due to HW bug, retry pmp=0
[29470.428710] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[29470.442007] ata8.00: configured for UDMA/133
[29470.442040] ata8: EH complete
[30861.793185] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[30861.793205] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[30861.793208] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4
(timeout)
[30861.793216] ata8.00: status: { DRDY }
[30861.793228] ata8: hard resetting link
[30862.389604] ata8: softreset failed (device not ready)
[30862.389614] ata8: failed due to HW bug, retry pmp=0
[30862.553541] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[30862.565716] ata8.00: configured for UDMA/133
[30862.565758] ata8: EH complete
[30869.793199] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[30869.793219] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[30869.793223] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[30869.793230] ata8.00: status: { DRDY }
[30869.793242] ata8: hard resetting link
[30870.333570] ata8: softreset failed (device not ready)
[30870.333579] ata8: failed due to HW bug, retry pmp=0
[30870.497680] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[30870.509783] ata8.00: configured for UDMA/133
[30870.509813] ata8: EH complete
[36301.639209] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[36301.639218] ata8.00: irq_stat 0x40000008
[36301.639237] ata8.00: cmd 60/18:00:80:e9:09/00:00:23:00:00/40 tag 0 ncq
12288 in
[36301.639240] res 41/04:07:80:e9:09/00:00:23:00:00/40 Emask 0x401
(device error) <F>
[36301.639248] ata8.00: status: { DRDY ERR }
[36301.639253] ata8.00: error: { ABRT }
[36301.652443] ata8.00: configured for UDMA/133
[36301.652466] ata8: EH complete
[36329.593455] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[36329.593472] ata8.00: irq_stat 0x40000008
[36329.593491] ata8.00: cmd 60/18:00:80:e9:09/00:00:23:00:00/40 tag 0 ncq
12288 in
[36329.593495] res 41/04:07:80:e9:09/00:00:23:00:00/40 Emask 0x401
(device error) <F>
[36329.593524] ata8.00: status: { DRDY ERR }
[36329.593530] ata8.00: error: { ABRT }
[36329.605664] ata8.00: configured for UDMA/133
[36329.605687] ata8: EH complete
[36352.125981] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[36352.125991] ata8.00: irq_stat 0x40000008
[36352.126009] ata8.00: cmd 60/18:00:80:e9:09/00:00:23:00:00/40 tag 0 ncq
12288 in
[36352.126013] res 41/04:07:80:e9:09/00:00:23:00:00/40 Emask 0x401
(device error) <F>
[36352.126021] ata8.00: status: { DRDY ERR }
[36352.126026] ata8.00: error: { ABRT }
[36352.138677] ata8.00: configured for UDMA/133
[36352.138700] ata8: EH complete
[36370.337334] ata8.00: NCQ disabled due to excessive errors
[36370.337339] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[36370.337341] ata8.00: irq_stat 0x40000008
[36370.337347] ata8.00: cmd 60/18:00:80:e9:09/00:00:23:00:00/40 tag 0 ncq
12288 in
[36370.337348] res 41/04:07:80:e9:09/00:00:23:00:00/40 Emask 0x401
(device error) <F>
[36370.337350] ata8.00: status: { DRDY ERR }
[36370.337352] ata8.00: error: { ABRT }
[36370.349333] ata8.00: configured for UDMA/133
[36370.349360] ata8: EH complete
[36379.641876] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[36379.641885] ata8.00: irq_stat 0x40000001
[36379.641903] ata8.00: cmd 25/00:18:80:e9:09/00:00:23:00:00/e0 tag 0 dma
12288 in
[36379.641907] res 41/04:07:80:e9:09/00:00:23:00:00/e0 Emask 0x1
(device error)
[36379.641915] ata8.00: status: { DRDY ERR }
[36379.641920] ata8.00: error: { ABRT }
[36379.653754] ata8.00: configured for UDMA/133
[36379.653779] ata8: EH complete
[36388.973359] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[36388.973368] ata8.00: irq_stat 0x40000001
[36388.973386] ata8.00: cmd 25/00:18:80:e9:09/00:00:23:00:00/e0 tag 0 dma
12288 in
[36388.973390] res 41/04:07:80:e9:09/00:00:23:00:00/e0 Emask 0x1
(device error)
[36388.973398] ata8.00: status: { DRDY ERR }
[36388.973403] ata8.00: error: { ABRT }
[36388.985379] ata8.00: configured for UDMA/133
[36388.985404] sd 7:0:0:0: [sdf] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[36388.985412] sd 7:0:0:0: [sdf] Sense Key : Aborted Command [current]
[descriptor]
[36388.985422] Descriptor sense data with sense descriptors (in hex):
[36388.985426] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[36388.985445] 23 09 e9 80
[36388.985453] sd 7:0:0:0: [sdf] Add. Sense: No additional sense information
[36388.985462] end_request: I/O error, dev sdf, sector 587852160
[36388.985470] Buffer I/O error on device md1, logical block 146962544
[36388.985482] Buffer I/O error on device md1, logical block 146962545
[36388.985488] Buffer I/O error on device md1, logical block 146962546
[36388.985524] ata8: EH complete
[36398.303765] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[36398.303774] ata8.00: irq_stat 0x40000001
[36398.303792] ata8.00: cmd 25/00:08:80:e9:09/00:00:23:00:00/e0 tag 0 dma 4096
in
[36398.303796] res 41/04:00:80:e9:09/00:00:23:00:00/e0 Emask 0x1
(device error)
[36398.303803] ata8.00: status: { DRDY ERR }
[36398.303808] ata8.00: error: { ABRT }
[36398.315894] ata8.00: configured for UDMA/133
[36398.315916] ata8: EH complete
[36407.346978] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[36407.346982] ata8.00: irq_stat 0x40000001
[36407.346988] ata8.00: cmd 25/00:08:80:e9:09/00:00:23:00:00/e0 tag 0 dma 4096
in
[36407.346989] res 41/04:00:80:e9:09/00:00:23:00:00/e0 Emask 0x1
(device error)
[36407.346991] ata8.00: status: { DRDY ERR }
[36407.346993] ata8.00: error: { ABRT }
[36407.358876] ata8.00: configured for UDMA/133
[36407.358888] ata8: EH complete
[36416.680069] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[36416.680079] ata8.00: irq_stat 0x40000001
[36416.680097] ata8.00: cmd 25/00:08:80:e9:09/00:00:23:00:00/e0 tag 0 dma 4096
in
[36416.680101] res 41/04:00:80:e9:09/00:00:23:00:00/e0 Emask 0x1
(device error)
[36416.680109] ata8.00: status: { DRDY ERR }
[36416.680114] ata8.00: error: { ABRT }
[36416.692769] ata8.00: configured for UDMA/133
[36416.692792] ata8: EH complete
[36426.011216] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[36426.011225] ata8.00: irq_stat 0x40000001
[36426.011243] ata8.00: cmd 25/00:08:80:e9:09/00:00:23:00:00/e0 tag 0 dma 4096
in
[36426.011246] res 41/04:00:80:e9:09/00:00:23:00:00/e0 Emask 0x1
(device error)
[36426.011254] ata8.00: status: { DRDY ERR }
[36426.011259] ata8.00: error: { ABRT }
[36426.023178] ata8.00: configured for UDMA/133
[36426.023202] ata8: EH completeIs this a hardware error?
Signature · 2 lines
Thomas Fjellstrom [email protected]
Quoted 103 lines · Thomas Fjellstrom
I've recently started seeing the following messages from a new WD Green drive, not long after I had to RMA a Seagate drive for a strange (but different) error. Highlights from my dmesg include:
[59634.792101] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [59634.792121] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [59634.792125] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [59634.792133] ata6.00: status: { DRDY } [59634.792145] ata6: hard resetting link [59635.277695] ata6: softreset failed (device not ready) [59635.277705] ata6: failed due to HW bug, retry pmp=0 [59635.441570] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [59635.454030] ata6.00: configured for UDMA/133 [59635.454068] ata6: EH complete ... [59713.792224] ata6.00: NCQ disabled due to excessive errors [59713.792236] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [59713.792254] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [59713.792257] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [59713.792264] ata6.00: status: { DRDY } ... [63484.781764] ata6: hard resetting link [63485.264204] ata6: softreset failed (device not ready) [63485.264214] ata6: failed due to HW bug, retry pmp=0 [63485.428205] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [63485.440499] ata6.00: configured for UDMA/100 [63485.440536] ata6: EH complete [63493.780182] ata6.00: limiting speed to UDMA/33:PIO4 [63493.780194] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [63493.780211] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [63493.780214] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [63493.780221] ata6.00: status: { DRDY } ... [99318.070669] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [99318.070679] ata6.00: irq_stat 0x40000001 [99318.070698] ata6.00: cmd 25/00:00:30:bd:01/00:01:1b:00:00/e0 tag 0 dma 131072 in [99318.070701] res 41/04:ef:30:bd:01/00:00:1b:00:00/e0 Emask 0x1 (device error) [99318.070709] ata6.00: status: { DRDY ERR } [99318.070714] ata6.00: error: { ABRT } [99318.082588] ata6.00: configured for UDMA/33 [99318.082612] ata6: EH complete ... [99339.780358] ata6: hard resetting link [99349.785096] ata6: softreset failed (device not ready) [99349.785108] ata6: hard resetting link [99359.789033] ata6: softreset failed (device not ready) [99359.789045] ata6: hard resetting link [99370.352916] ata6: link is slow to respond, please be patient (ready=0) .. [99400.016925] ata6: softreset failed (device not ready) [99400.016936] ata6: reset failed, giving up [99400.016942] ata6.00: disabled [99400.016986] ata6: EH complete [99400.017021] sd 5:0:0:0: [sdf] Unhandled error code [99400.017026] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017021] sd 5:0:0:0: [sdf] Unhandled error code [99400.017026] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017035] end_request: I/O error, dev sdf, sector 453099568 [99400.017045] Buffer I/O error on device md1, logical block 113274390 [99400.017058] Buffer I/O error on device md1, logical block 113274391 [99400.017064] Buffer I/O error on device md1, logical block 113274392 [99400.017070] Buffer I/O error on device md1, logical block 113274393 [99400.017076] Buffer I/O error on device md1, logical block 113274394 [99400.017082] Buffer I/O error on device md1, logical block 113274395 [99400.017088] Buffer I/O error on device md1, logical block 113274396 [99400.017094] Buffer I/O error on device md1, logical block 113274397 [99400.017100] Buffer I/O error on device md1, logical block 113274398 [99400.017106] Buffer I/O error on device md1, logical block 113274399 [99400.017115] sd 5:0:0:0: [sdf] Unhandled error code [99400.017123] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017133] end_request: I/O error, dev sdf, sector 453099824 [99400.017310] sd 5:0:0:0: [sdf] Unhandled error code [99400.017315] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017322] end_request: I/O error, dev sdf, sector 453099568 [99400.017383] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [99400.017456] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [99400.018822] sd 5:0:0:0: [sdf] Unhandled error code [99400.018829] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.018838] end_request: I/O error, dev sdf, sector 453099568and a bunch more
end_requesterrors. This happens fairly reliably after a day or so of being online. I try and start to play some music or watch a video off the array (2xWD Green on md raid0) and it fails. The file system is mostly read only right now (that is I don't write to it) so I haven't manged to loose any data that I know of, and the fs seems to be fine. A reboot fixes the errors and the disk and fs work fine for a day or two before these errors show up again.
Quoted 2 lines
I'm currently running 2.6.31-rc5 from kernel.org. What would cause these errors?
This sort of thing is quite often a hardware problem. You can see that commands start timing out and then the controller seems to mostly lose communication with the drive (the resets failing). In particular, it seems an overloaded power supply can cause these sort of symptoms. (It seems like a lot of the time this happens with people with multiple hard drives installed, either the power supply just isn't powerful enough to handle them all, or there's too many drives connected to one cable and the voltage drop is too high under heavy load.)
Quoted 107 lines · Robert Hancock
Quoted 103 lines · Thomas Fjellstrom
I've recently started seeing the following messages from a new WD Green drive, not long after I had to RMA a Seagate drive for a strange (but different) error. Highlights from my dmesg include:
[59634.792101] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [59634.792121] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [59634.792125] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [59634.792133] ata6.00: status: { DRDY } [59634.792145] ata6: hard resetting link [59635.277695] ata6: softreset failed (device not ready) [59635.277705] ata6: failed due to HW bug, retry pmp=0 [59635.441570] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [59635.454030] ata6.00: configured for UDMA/133 [59635.454068] ata6: EH complete ... [59713.792224] ata6.00: NCQ disabled due to excessive errors [59713.792236] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [59713.792254] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [59713.792257] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [59713.792264] ata6.00: status: { DRDY } ... [63484.781764] ata6: hard resetting link [63485.264204] ata6: softreset failed (device not ready) [63485.264214] ata6: failed due to HW bug, retry pmp=0 [63485.428205] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [63485.440499] ata6.00: configured for UDMA/100 [63485.440536] ata6: EH complete [63493.780182] ata6.00: limiting speed to UDMA/33:PIO4 [63493.780194] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [63493.780211] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [63493.780214] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [63493.780221] ata6.00: status: { DRDY } ... [99318.070669] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [99318.070679] ata6.00: irq_stat 0x40000001 [99318.070698] ata6.00: cmd 25/00:00:30:bd:01/00:01:1b:00:00/e0 tag 0 dma 131072 in [99318.070701] res 41/04:ef:30:bd:01/00:00:1b:00:00/e0 Emask 0x1 (device error) [99318.070709] ata6.00: status: { DRDY ERR } [99318.070714] ata6.00: error: { ABRT } [99318.082588] ata6.00: configured for UDMA/33 [99318.082612] ata6: EH complete ... [99339.780358] ata6: hard resetting link [99349.785096] ata6: softreset failed (device not ready) [99349.785108] ata6: hard resetting link [99359.789033] ata6: softreset failed (device not ready) [99359.789045] ata6: hard resetting link [99370.352916] ata6: link is slow to respond, please be patient (ready=0) .. [99400.016925] ata6: softreset failed (device not ready) [99400.016936] ata6: reset failed, giving up [99400.016942] ata6.00: disabled [99400.016986] ata6: EH complete [99400.017021] sd 5:0:0:0: [sdf] Unhandled error code [99400.017026] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017021] sd 5:0:0:0: [sdf] Unhandled error code [99400.017026] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017035] end_request: I/O error, dev sdf, sector 453099568 [99400.017045] Buffer I/O error on device md1, logical block 113274390 [99400.017058] Buffer I/O error on device md1, logical block 113274391 [99400.017064] Buffer I/O error on device md1, logical block 113274392 [99400.017070] Buffer I/O error on device md1, logical block 113274393 [99400.017076] Buffer I/O error on device md1, logical block 113274394 [99400.017082] Buffer I/O error on device md1, logical block 113274395 [99400.017088] Buffer I/O error on device md1, logical block 113274396 [99400.017094] Buffer I/O error on device md1, logical block 113274397 [99400.017100] Buffer I/O error on device md1, logical block 113274398 [99400.017106] Buffer I/O error on device md1, logical block 113274399 [99400.017115] sd 5:0:0:0: [sdf] Unhandled error code [99400.017123] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017133] end_request: I/O error, dev sdf, sector 453099824 [99400.017310] sd 5:0:0:0: [sdf] Unhandled error code [99400.017315] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.017322] end_request: I/O error, dev sdf, sector 453099568 [99400.017383] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [99400.017456] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [99400.018822] sd 5:0:0:0: [sdf] Unhandled error code [99400.018829] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [99400.018838] end_request: I/O error, dev sdf, sector 453099568and a bunch more
end_requesterrors. This happens fairly reliably after a day or so of being online. I try and start to play some music or watch a video off the array (2xWD Green on md raid0) and it fails. The file system is mostly read only right now (that is I don't write to it) so I haven't manged to loose any data that I know of, and the fs seems to be fine. A reboot fixes the errors and the disk and fs work fine for a day or two before these errors show up again.Quoted 2 lines
I'm currently running 2.6.31-rc5 from kernel.org. What would cause these errors?
Quoted 8 lines
This sort of thing is quite often a hardware problem. You can see that commands start timing out and then the controller seems to mostly lose communication with the drive (the resets failing). In particular, it seems an overloaded power supply can cause these sort of symptoms. (It seems like a lot of the time this happens with people with multiple hard drives installed, either the power supply just isn't powerful enough to handle them all, or there's too many drives connected to one cable and the voltage drop is too high under heavy load.)
I doubt that's the problem, this is an almost brand new 650W and there's only 2 drives per cable, and each of the 3 12v rails has 19A which should be more than enough for all 6 drives, even if all of them were on the same rail (shouldn't be, 5v is 24A, so should be enough for just about anything).
Were you talking about the softreset's? That seems to be a common AMD SB600+ error. At least it happens with both of my AMD boards, a SB700 and a SB750. Linux eventually figures out a way to initialize the sata ports, but it sure takes a while if you have 10+ drives connected.
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 2 lines
Thomas Fjellstrom [email protected]
BIOS update == more errors (was Re: sata exception frozen timeout?)
In reply to Thomas FjellstromI've updated my bios to try and see if it would help at all (it did seem to fix other issues).
But now I'm getting the following warnings and errors from dmesg on boot:
(debian sid 2.6.30, with "noapic" to see if the original problem was an interupt issue, as everyone seems to have hinted at).
[ 1.024337] ------------[ cut here ]------------
[ 1.024408] WARNING: at /build/buildd-linux-2.6_2.6.30-6-amd64-
s9DPiZ/linux-2.6-2.6.30/debian/build/source_amd64_none/drivers/ata/libata-
core.c:6174 ata_host_activate+0x47/0xe0 [libata]()
[ 1.024492] Hardware name: GA-MA790FXT-UD5P
[ 1.024546] Modules linked in: crc_itu_t atiixp(+) ide_core pata_jmicron
ahci(+) ehci_hcd(+) libata scsi_mod r8169 mii thermal fan thermal_sys
[ 1.025196] Pid: 796, comm: work_for_cpu Not tainted 2.6.30-1-amd64 #1
[ 1.025252] Call Trace:
[ 1.025318] [<ffffffffa0056101>] ? ata_host_activate+0x47/0xe0 [libata]
[ 1.025385] [<ffffffffa0056101>] ? ata_host_activate+0x47/0xe0 [libata]
[ 1.025445] [<ffffffff8024237f>] ? warn_slowpath_common+0x77/0xa3
[ 1.025505] [<ffffffffa008e598>] ? ahci_interrupt+0x0/0x454 [ahci]
[ 1.025572] [<ffffffffa0056101>] ? ata_host_activate+0x47/0xe0 [libata]
[ 1.025632] [<ffffffffa008e578>] ? ahci_init_one+0xbb4/0xbd4 [ahci]
[ 1.025691] [<ffffffff8025136e>] ? do_work_for_cpu+0x0/0x1b
[ 1.025749] [<ffffffff8035fa16>] ? local_pci_probe+0x12/0x16
[ 1.025806] [<ffffffff80251379>] ? do_work_for_cpu+0xb/0x1b
[ 1.025862] [<ffffffff80254382>] ? kthread+0x54/0x80
[ 1.025918] [<ffffffff80210aca>] ? child_rip+0xa/0x20
[ 1.025975] [<ffffffff8025432e>] ? kthread+0x0/0x80
[ 1.026030] [<ffffffff80210ac0>] ? child_rip+0x0/0x20
[ 1.026085] ---[ end trace 54d3fd405814ad85 ]---
...
[ 14.872233] ata10.15: qc timeout (cmd 0xe4)
[ 14.872925] ata10.15: failed to read PMP GSCR[0] (Emask=0x4)
[ 14.873256] ata9.15: qc timeout (cmd 0xe4)
[ 14.873344] ata10: limiting SATA link speed to 1.5 Gbps
[ 14.874008] ata9.15: failed to read PMP GSCR[0] (Emask=0x4)
[ 14.874271] ata9: limiting SATA link speed to 1.5 Gbps
[ 15.548002] irq 7: nobody cared (try booting with the "irqpoll" option)
[ 15.548121] Pid: 0, comm: swapper Tainted: G W 2.6.30-1-amd64 #1
[ 15.548240] Call Trace:
[ 15.548346] <IRQ> [<ffffffff8027fe0f>] ? __report_bad_irq+0x30/0x7d
[ 15.548569] [<ffffffff8027ff61>] ? note_interrupt+0x105/0x170
[ 15.548689] [<ffffffff802805f1>] ? handle_level_irq+0x7c/0xaf
[ 15.548809] [<ffffffff80212655>] ? handle_irq+0x17/0x1d
[ 15.548929] [<ffffffff80211e7c>] ? do_IRQ+0x57/0xbf
[ 15.549044] [<ffffffff80210453>] ? ret_from_intr+0x0/0x11
[ 15.549161] <EOI> [<ffffffff8064e140>] ? early_idt_handler+0x0/0x71
[ 15.549379] [<ffffffff80227520>] ? native_safe_halt+0x2/0x3
[ 15.549497] [<ffffffff80216995>] ? default_idle+0x40/0x68
[ 15.549612] [<ffffffff8025d784>] ? clockevents_notify+0x2b/0x75
[ 15.549730] [<ffffffff80216d48>] ? c1e_idle+0xe5/0x10d
[ 15.549848] [<ffffffff8020edda>] ? cpu_idle+0x50/0x91
[ 15.549963] [<ffffffff8064ec62>] ? start_kernel+0x37a/0x386
[ 15.550081] [<ffffffff8064e3b7>] ? x86_64_start_kernel+0xf9/0x106
[ 15.550199] handlers:
[ 15.550311] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e)
[ 15.550630] Disabling IRQ #7
[ 15.636304] irq 11: nobody cared (try booting with the "irqpoll" option)
[ 15.636377] Pid: 0, comm: swapper Tainted: G W 2.6.30-1-amd64 #1
[ 15.636434] Call Trace:
[ 15.636486] <IRQ> [<ffffffff8027fe0f>] ? __report_bad_irq+0x30/0x7d
[ 15.636586] [<ffffffff8027ff61>] ? note_interrupt+0x105/0x170
[ 15.636643] [<ffffffff802805f1>] ? handle_level_irq+0x7c/0xaf
[ 15.636699] [<ffffffff80212655>] ? handle_irq+0x17/0x1d
[ 15.636755] [<ffffffff80211e7c>] ? do_IRQ+0x57/0xbf
[ 15.636811] [<ffffffff80210453>] ? ret_from_intr+0x0/0x11
[ 15.636866] <EOI> [<ffffffff8064e140>] ? early_idt_handler+0x0/0x71
[ 15.636966] [<ffffffff80227520>] ? native_safe_halt+0x2/0x3
[ 15.637022] [<ffffffff80216995>] ? default_idle+0x40/0x68
[ 15.637078] [<ffffffff8025d784>] ? clockevents_notify+0x2b/0x75
[ 15.637135] [<ffffffff80216d48>] ? c1e_idle+0xe5/0x10d
[ 15.637191] [<ffffffff8020edda>] ? cpu_idle+0x50/0x91
[ 15.637247] [<ffffffff8064ec62>] ? start_kernel+0x37a/0x386
[ 15.637304] [<ffffffff8064e3b7>] ? x86_64_start_kernel+0xf9/0x106
[ 15.637359] handlers:
[ 15.637411] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e)
[ 15.637549] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e)
[ 15.637687] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e)
[ 15.637825] Disabling IRQ #11
[ 17.536129] usb-storage: device scan complete
...
[ 21.388126] ata9.15: qc timeout (cmd 0xe4)
[ 21.388194] ata9.15: failed to read PMP GSCR[0] (Emask=0x4)
[ 21.588135] ata10.15: qc timeout (cmd 0xe4)
[ 21.588204] ata10.15: failed to read PMP GSCR[0] (Emask=0x4)
[ 24.832135] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 25.632183] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
...
[ 198.322072] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 198.322080] ata8.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0
[ 198.322081] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 198.322083] ata8.00: status: { DRDY }
[ 198.322088] ata8: hard resetting link
[ 198.916035] ata8: softreset failed (device not ready)
[ 198.916039] ata8: failed due to HW bug, retry pmp=0
[ 199.080024] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 199.092059] ata8.00: configured for UDMA/133
[ 199.092072] ata8: EH complete
[ 227.900583] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 227.900590] ata8.00: cmd b0/d8:00:01:4f:c2/00:00:00:00:00/00 tag 0
[ 227.900591] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4
(timeout)
[ 227.900594] ata8.00: status: { DRDY }
[ 227.900598] ata8: hard resetting link
[ 228.384016] ata8: softreset failed (device not ready)
[ 228.384020] ata8: failed due to HW bug, retry pmp=0
[ 228.548024] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 228.560372] ata8.00: configured for UDMA/133
[ 228.560385] ata8: EH complete
[ 238.805198] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 238.805218] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[ 238.805221] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 238.805229] ata8.00: status: { DRDY }
[ 238.805241] ata8: hard resetting link
[ 239.404154] ata8: softreset failed (device not ready)
[ 239.404163] ata8: failed due to HW bug, retry pmp=0
[ 239.568186] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 239.580343] ata8.00: configured for UDMA/133
[ 239.580374] ata8: EH complete
[ 246.808086] ata8.00: NCQ disabled due to excessive errors
[ 246.808099] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 246.808115] ata8.00: cmd b0/d8:00:01:4f:c2/00:00:00:00:00/00 tag 0
[ 246.808119] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4
(timeout)
[ 246.808126] ata8.00: status: { DRDY }
[ 246.808138] ata8: hard resetting link
[ 247.292158] ata8: softreset failed (device not ready)
[ 247.292167] ata8: failed due to HW bug, retry pmp=0
[ 247.456174] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 247.468955] ata8.00: configured for UDMA/133
[ 247.468984] ata8: EH complete
[ 272.804207] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 272.804227] ata8.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0
[ 272.804231] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4
(timeout)
[ 272.804238] ata8.00: status: { DRDY }
[ 272.804250] ata8: hard resetting link
[ 273.292161] ata8: softreset failed (device not ready)
[ 273.292169] ata8: failed due to HW bug, retry pmp=0
[ 273.456173] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 273.468892] ata8.00: configured for UDMA/133
[ 273.468916] ata8: EH completeOn boot, it seemed to hang the disk up for a good few minutes, even though nothing is using it at the moment (I have to manually bring up the mdraid0 array, so it can't possibly be mounted), and smartctl was erroring out for a while, but now its fine, and smart shows no issues.
I'm going to try without noapic on 2.6.30, and 2.6.31-rc5 and see what happens.
Signature · 2 lines
Thomas Fjellstrom [email protected]
Re: BIOS update == more errors (was Re: sata exception frozen timeout?)
Quoted 150 lines · Thomas Fjellstrom
I've updated my bios to try and see if it would help at all (it did seem to fix other issues).
But now I'm getting the following warnings and errors from dmesg on boot:
(debian sid 2.6.30, with "noapic" to see if the original problem was an interupt issue, as everyone seems to have hinted at).[ 1.024337] ------------[ cut here ]------------ [ 1.024408] WARNING: at /build/buildd-linux-2.6_2.6.30-6-amd64- s9DPiZ/linux-2.6-2.6.30/debian/build/source_amd64_none/drivers/ata/libata- core.c:6174 ata_host_activate+0x47/0xe0 [libata]() [ 1.024492] Hardware name: GA-MA790FXT-UD5P [ 1.024546] Modules linked in: crc_itu_t atiixp(+) ide_core pata_jmicron ahci(+) ehci_hcd(+) libata scsi_mod r8169 mii thermal fan thermal_sys [ 1.025196] Pid: 796, comm: work_for_cpu Not tainted 2.6.30-1-amd64 #1 [ 1.025252] Call Trace: [ 1.025318] [<ffffffffa0056101>] ? ata_host_activate+0x47/0xe0 [libata] [ 1.025385] [<ffffffffa0056101>] ? ata_host_activate+0x47/0xe0 [libata] [ 1.025445] [<ffffffff8024237f>] ? warn_slowpath_common+0x77/0xa3 [ 1.025505] [<ffffffffa008e598>] ? ahci_interrupt+0x0/0x454 [ahci] [ 1.025572] [<ffffffffa0056101>] ? ata_host_activate+0x47/0xe0 [libata] [ 1.025632] [<ffffffffa008e578>] ? ahci_init_one+0xbb4/0xbd4 [ahci] [ 1.025691] [<ffffffff8025136e>] ? do_work_for_cpu+0x0/0x1b [ 1.025749] [<ffffffff8035fa16>] ? local_pci_probe+0x12/0x16 [ 1.025806] [<ffffffff80251379>] ? do_work_for_cpu+0xb/0x1b [ 1.025862] [<ffffffff80254382>] ? kthread+0x54/0x80 [ 1.025918] [<ffffffff80210aca>] ? child_rip+0xa/0x20 [ 1.025975] [<ffffffff8025432e>] ? kthread+0x0/0x80 [ 1.026030] [<ffffffff80210ac0>] ? child_rip+0x0/0x20 [ 1.026085] ---[ end trace 54d3fd405814ad85 ]--- ... [ 14.872233] ata10.15: qc timeout (cmd 0xe4) [ 14.872925] ata10.15: failed to read PMP GSCR[0] (Emask=0x4) [ 14.873256] ata9.15: qc timeout (cmd 0xe4) [ 14.873344] ata10: limiting SATA link speed to 1.5 Gbps [ 14.874008] ata9.15: failed to read PMP GSCR[0] (Emask=0x4) [ 14.874271] ata9: limiting SATA link speed to 1.5 Gbps [ 15.548002] irq 7: nobody cared (try booting with the "irqpoll" option) [ 15.548121] Pid: 0, comm: swapper Tainted: G W 2.6.30-1-amd64 #1 [ 15.548240] Call Trace: [ 15.548346] <IRQ> [<ffffffff8027fe0f>] ? __report_bad_irq+0x30/0x7d [ 15.548569] [<ffffffff8027ff61>] ? note_interrupt+0x105/0x170 [ 15.548689] [<ffffffff802805f1>] ? handle_level_irq+0x7c/0xaf [ 15.548809] [<ffffffff80212655>] ? handle_irq+0x17/0x1d [ 15.548929] [<ffffffff80211e7c>] ? do_IRQ+0x57/0xbf [ 15.549044] [<ffffffff80210453>] ? ret_from_intr+0x0/0x11 [ 15.549161] <EOI> [<ffffffff8064e140>] ? early_idt_handler+0x0/0x71 [ 15.549379] [<ffffffff80227520>] ? native_safe_halt+0x2/0x3 [ 15.549497] [<ffffffff80216995>] ? default_idle+0x40/0x68 [ 15.549612] [<ffffffff8025d784>] ? clockevents_notify+0x2b/0x75 [ 15.549730] [<ffffffff80216d48>] ? c1e_idle+0xe5/0x10d [ 15.549848] [<ffffffff8020edda>] ? cpu_idle+0x50/0x91 [ 15.549963] [<ffffffff8064ec62>] ? start_kernel+0x37a/0x386 [ 15.550081] [<ffffffff8064e3b7>] ? x86_64_start_kernel+0xf9/0x106 [ 15.550199] handlers: [ 15.550311] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e) [ 15.550630] Disabling IRQ #7 [ 15.636304] irq 11: nobody cared (try booting with the "irqpoll" option) [ 15.636377] Pid: 0, comm: swapper Tainted: G W 2.6.30-1-amd64 #1 [ 15.636434] Call Trace: [ 15.636486] <IRQ> [<ffffffff8027fe0f>] ? __report_bad_irq+0x30/0x7d [ 15.636586] [<ffffffff8027ff61>] ? note_interrupt+0x105/0x170 [ 15.636643] [<ffffffff802805f1>] ? handle_level_irq+0x7c/0xaf [ 15.636699] [<ffffffff80212655>] ? handle_irq+0x17/0x1d [ 15.636755] [<ffffffff80211e7c>] ? do_IRQ+0x57/0xbf [ 15.636811] [<ffffffff80210453>] ? ret_from_intr+0x0/0x11 [ 15.636866] <EOI> [<ffffffff8064e140>] ? early_idt_handler+0x0/0x71 [ 15.636966] [<ffffffff80227520>] ? native_safe_halt+0x2/0x3 [ 15.637022] [<ffffffff80216995>] ? default_idle+0x40/0x68 [ 15.637078] [<ffffffff8025d784>] ? clockevents_notify+0x2b/0x75 [ 15.637135] [<ffffffff80216d48>] ? c1e_idle+0xe5/0x10d [ 15.637191] [<ffffffff8020edda>] ? cpu_idle+0x50/0x91 [ 15.637247] [<ffffffff8064ec62>] ? start_kernel+0x37a/0x386 [ 15.637304] [<ffffffff8064e3b7>] ? x86_64_start_kernel+0xf9/0x106 [ 15.637359] handlers: [ 15.637411] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e) [ 15.637549] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e) [ 15.637687] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e) [ 15.637825] Disabling IRQ #11 [ 17.536129] usb-storage: device scan complete ... [ 21.388126] ata9.15: qc timeout (cmd 0xe4) [ 21.388194] ata9.15: failed to read PMP GSCR[0] (Emask=0x4) [ 21.588135] ata10.15: qc timeout (cmd 0xe4) [ 21.588204] ata10.15: failed to read PMP GSCR[0] (Emask=0x4) [ 24.832135] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 25.632183] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ... [ 198.322072] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 198.322080] ata8.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 198.322081] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 198.322083] ata8.00: status: { DRDY } [ 198.322088] ata8: hard resetting link [ 198.916035] ata8: softreset failed (device not ready) [ 198.916039] ata8: failed due to HW bug, retry pmp=0 [ 199.080024] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 199.092059] ata8.00: configured for UDMA/133 [ 199.092072] ata8: EH complete [ 227.900583] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 227.900590] ata8.00: cmd b0/d8:00:01:4f:c2/00:00:00:00:00/00 tag 0 [ 227.900591] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 (timeout) [ 227.900594] ata8.00: status: { DRDY } [ 227.900598] ata8: hard resetting link [ 228.384016] ata8: softreset failed (device not ready) [ 228.384020] ata8: failed due to HW bug, retry pmp=0 [ 228.548024] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 228.560372] ata8.00: configured for UDMA/133 [ 228.560385] ata8: EH complete [ 238.805198] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 238.805218] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 238.805221] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 238.805229] ata8.00: status: { DRDY } [ 238.805241] ata8: hard resetting link [ 239.404154] ata8: softreset failed (device not ready) [ 239.404163] ata8: failed due to HW bug, retry pmp=0 [ 239.568186] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 239.580343] ata8.00: configured for UDMA/133 [ 239.580374] ata8: EH complete [ 246.808086] ata8.00: NCQ disabled due to excessive errors [ 246.808099] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 246.808115] ata8.00: cmd b0/d8:00:01:4f:c2/00:00:00:00:00/00 tag 0 [ 246.808119] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 (timeout) [ 246.808126] ata8.00: status: { DRDY } [ 246.808138] ata8: hard resetting link [ 247.292158] ata8: softreset failed (device not ready) [ 247.292167] ata8: failed due to HW bug, retry pmp=0 [ 247.456174] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 247.468955] ata8.00: configured for UDMA/133 [ 247.468984] ata8: EH complete [ 272.804207] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 272.804227] ata8.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 272.804231] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 (timeout) [ 272.804238] ata8.00: status: { DRDY } [ 272.804250] ata8: hard resetting link [ 273.292161] ata8: softreset failed (device not ready) [ 273.292169] ata8: failed due to HW bug, retry pmp=0 [ 273.456173] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 273.468892] ata8.00: configured for UDMA/133 [ 273.468916] ata8: EH complete
Quoted 7 lines
On boot, it seemed to hang the disk up for a good few minutes, even though nothing is using it at the moment (I have to manually bring up the mdraid0 array, so it can't possibly be mounted), and smartctl was erroring out for a while, but now its fine, and smart shows no issues.
I'm going to try without noapic on 2.6.30, and 2.6.31-rc5 and see what happens.
back with 2.6.30 apic enabled, all the traces are gone, but I still get the SATA errors, and a new message: ata8: SError: { HostInt }
[ 415.781659] ata8.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x6
frozen
[ 415.781672] ata8: SError: { HostInt }
[ 415.781687] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[ 415.781690] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x44
(timeout)
[ 415.781697] ata8.00: status: { DRDY }
[ 415.781708] ata8: hard resetting link
[ 416.264190] ata8: softreset failed (device not ready)
[ 416.264199] ata8: failed due to HW bug, retry pmp=0
[ 416.428196] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 416.440517] ata8.00: configured for UDMA/133
[ 416.440544] ata8: EH complete
[ 424.781778] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 424.781798] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[ 424.781801] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 424.781809] ata8.00: status: { DRDY }
[ 424.781820] ata8: hard resetting link
[ 425.265677] ata8: softreset failed (device not ready)
[ 425.265686] ata8: failed due to HW bug, retry pmp=0
[ 425.429546] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 425.442153] ata8.00: configured for UDMA/133
[ 425.442179] ata8: EH complete
[ 458.482002] CE: hpet increasing min_delta_ns to 15000 nsec
[ 499.780213] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 499.780233] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[ 499.780237] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 499.780244] ata8.00: status: { DRDY }
[ 499.780256] ata8: hard resetting link
[ 500.320191] ata8: softreset failed (device not ready)
[ 500.320200] ata8: failed due to HW bug, retry pmp=0
[ 500.485084] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 500.497235] ata8.00: configured for UDMA/133
[ 500.497256] ata8: EH completeAnd now with 2.6.31-rc5, instant ata exceptions, same as before (just no SError line this time).
Signature · 2 lines
Thomas Fjellstrom [email protected]
Re: BIOS update == more errors (was Re: sata exception frozen timeout?)
Quoted 202 lines · Thomas Fjellstrom
Quoted 151 lines · Thomas Fjellstrom
I've updated my bios to try and see if it would help at all (it did seem to fix other issues).
But now I'm getting the following warnings and errors from dmesg on boot:
(debian sid 2.6.30, with "noapic" to see if the original problem was an interupt issue, as everyone seems to have hinted at).[ 1.024337] ------------[ cut here ]------------ [ 1.024408] WARNING: at /build/buildd-linux-2.6_2.6.30-6-amd64- s9DPiZ/linux-2.6-2.6.30/debian/build/source_amd64_none/drivers/ata/libata - core.c:6174 ata_host_activate+0x47/0xe0 [libata]() [ 1.024492] Hardware name: GA-MA790FXT-UD5P [ 1.024546] Modules linked in: crc_itu_t atiixp(+) ide_core pata_jmicron ahci(+) ehci_hcd(+) libata scsi_mod r8169 mii thermal fan thermal_sys [ 1.025196] Pid: 796, comm: work_for_cpu Not tainted 2.6.30-1-amd64 #1 [ 1.025252] Call Trace: [ 1.025318] [<ffffffffa0056101>] ? ata_host_activate+0x47/0xe0 [libata] [ 1.025385] [<ffffffffa0056101>] ? ata_host_activate+0x47/0xe0 [libata] [ 1.025445] [<ffffffff8024237f>] ? warn_slowpath_common+0x77/0xa3 [ 1.025505] [<ffffffffa008e598>] ? ahci_interrupt+0x0/0x454 [ahci] [ 1.025572] [<ffffffffa0056101>] ? ata_host_activate+0x47/0xe0 [libata] [ 1.025632] [<ffffffffa008e578>] ? ahci_init_one+0xbb4/0xbd4 [ahci] [ 1.025691] [<ffffffff8025136e>] ? do_work_for_cpu+0x0/0x1b [ 1.025749] [<ffffffff8035fa16>] ? local_pci_probe+0x12/0x16 [ 1.025806] [<ffffffff80251379>] ? do_work_for_cpu+0xb/0x1b [ 1.025862] [<ffffffff80254382>] ? kthread+0x54/0x80 [ 1.025918] [<ffffffff80210aca>] ? child_rip+0xa/0x20 [ 1.025975] [<ffffffff8025432e>] ? kthread+0x0/0x80 [ 1.026030] [<ffffffff80210ac0>] ? child_rip+0x0/0x20 [ 1.026085] ---[ end trace 54d3fd405814ad85 ]--- ... [ 14.872233] ata10.15: qc timeout (cmd 0xe4) [ 14.872925] ata10.15: failed to read PMP GSCR[0] (Emask=0x4) [ 14.873256] ata9.15: qc timeout (cmd 0xe4) [ 14.873344] ata10: limiting SATA link speed to 1.5 Gbps [ 14.874008] ata9.15: failed to read PMP GSCR[0] (Emask=0x4) [ 14.874271] ata9: limiting SATA link speed to 1.5 Gbps [ 15.548002] irq 7: nobody cared (try booting with the "irqpoll" option) [ 15.548121] Pid: 0, comm: swapper Tainted: G W 2.6.30-1-amd64 #1 [ 15.548240] Call Trace: [ 15.548346] <IRQ> [<ffffffff8027fe0f>] ? __report_bad_irq+0x30/0x7d [ 15.548569] [<ffffffff8027ff61>] ? note_interrupt+0x105/0x170 [ 15.548689] [<ffffffff802805f1>] ? handle_level_irq+0x7c/0xaf [ 15.548809] [<ffffffff80212655>] ? handle_irq+0x17/0x1d [ 15.548929] [<ffffffff80211e7c>] ? do_IRQ+0x57/0xbf [ 15.549044] [<ffffffff80210453>] ? ret_from_intr+0x0/0x11 [ 15.549161] <EOI> [<ffffffff8064e140>] ? early_idt_handler+0x0/0x71 [ 15.549379] [<ffffffff80227520>] ? native_safe_halt+0x2/0x3 [ 15.549497] [<ffffffff80216995>] ? default_idle+0x40/0x68 [ 15.549612] [<ffffffff8025d784>] ? clockevents_notify+0x2b/0x75 [ 15.549730] [<ffffffff80216d48>] ? c1e_idle+0xe5/0x10d [ 15.549848] [<ffffffff8020edda>] ? cpu_idle+0x50/0x91 [ 15.549963] [<ffffffff8064ec62>] ? start_kernel+0x37a/0x386 [ 15.550081] [<ffffffff8064e3b7>] ? x86_64_start_kernel+0xf9/0x106 [ 15.550199] handlers: [ 15.550311] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e) [ 15.550630] Disabling IRQ #7 [ 15.636304] irq 11: nobody cared (try booting with the "irqpoll" option) [ 15.636377] Pid: 0, comm: swapper Tainted: G W 2.6.30-1-amd64 #1 [ 15.636434] Call Trace: [ 15.636486] <IRQ> [<ffffffff8027fe0f>] ? __report_bad_irq+0x30/0x7d [ 15.636586] [<ffffffff8027ff61>] ? note_interrupt+0x105/0x170 [ 15.636643] [<ffffffff802805f1>] ? handle_level_irq+0x7c/0xaf [ 15.636699] [<ffffffff80212655>] ? handle_irq+0x17/0x1d [ 15.636755] [<ffffffff80211e7c>] ? do_IRQ+0x57/0xbf [ 15.636811] [<ffffffff80210453>] ? ret_from_intr+0x0/0x11 [ 15.636866] <EOI> [<ffffffff8064e140>] ? early_idt_handler+0x0/0x71 [ 15.636966] [<ffffffff80227520>] ? native_safe_halt+0x2/0x3 [ 15.637022] [<ffffffff80216995>] ? default_idle+0x40/0x68 [ 15.637078] [<ffffffff8025d784>] ? clockevents_notify+0x2b/0x75 [ 15.637135] [<ffffffff80216d48>] ? c1e_idle+0xe5/0x10d [ 15.637191] [<ffffffff8020edda>] ? cpu_idle+0x50/0x91 [ 15.637247] [<ffffffff8064ec62>] ? start_kernel+0x37a/0x386 [ 15.637304] [<ffffffff8064e3b7>] ? x86_64_start_kernel+0xf9/0x106 [ 15.637359] handlers: [ 15.637411] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e) [ 15.637549] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e) [ 15.637687] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e) [ 15.637825] Disabling IRQ #11 [ 17.536129] usb-storage: device scan complete ... [ 21.388126] ata9.15: qc timeout (cmd 0xe4) [ 21.388194] ata9.15: failed to read PMP GSCR[0] (Emask=0x4) [ 21.588135] ata10.15: qc timeout (cmd 0xe4) [ 21.588204] ata10.15: failed to read PMP GSCR[0] (Emask=0x4) [ 24.832135] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 25.632183] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ... [ 198.322072] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 198.322080] ata8.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 198.322081] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 198.322083] ata8.00: status: { DRDY } [ 198.322088] ata8: hard resetting link [ 198.916035] ata8: softreset failed (device not ready) [ 198.916039] ata8: failed due to HW bug, retry pmp=0 [ 199.080024] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 199.092059] ata8.00: configured for UDMA/133 [ 199.092072] ata8: EH complete [ 227.900583] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 227.900590] ata8.00: cmd b0/d8:00:01:4f:c2/00:00:00:00:00/00 tag 0 [ 227.900591] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 (timeout) [ 227.900594] ata8.00: status: { DRDY } [ 227.900598] ata8: hard resetting link [ 228.384016] ata8: softreset failed (device not ready) [ 228.384020] ata8: failed due to HW bug, retry pmp=0 [ 228.548024] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 228.560372] ata8.00: configured for UDMA/133 [ 228.560385] ata8: EH complete [ 238.805198] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 238.805218] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 238.805221] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 238.805229] ata8.00: status: { DRDY } [ 238.805241] ata8: hard resetting link [ 239.404154] ata8: softreset failed (device not ready) [ 239.404163] ata8: failed due to HW bug, retry pmp=0 [ 239.568186] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 239.580343] ata8.00: configured for UDMA/133 [ 239.580374] ata8: EH complete [ 246.808086] ata8.00: NCQ disabled due to excessive errors [ 246.808099] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 246.808115] ata8.00: cmd b0/d8:00:01:4f:c2/00:00:00:00:00/00 tag 0 [ 246.808119] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 (timeout) [ 246.808126] ata8.00: status: { DRDY } [ 246.808138] ata8: hard resetting link [ 247.292158] ata8: softreset failed (device not ready) [ 247.292167] ata8: failed due to HW bug, retry pmp=0 [ 247.456174] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 247.468955] ata8.00: configured for UDMA/133 [ 247.468984] ata8: EH complete [ 272.804207] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 272.804227] ata8.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 272.804231] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 (timeout) [ 272.804238] ata8.00: status: { DRDY } [ 272.804250] ata8: hard resetting link [ 273.292161] ata8: softreset failed (device not ready) [ 273.292169] ata8: failed due to HW bug, retry pmp=0 [ 273.456173] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 273.468892] ata8.00: configured for UDMA/133 [ 273.468916] ata8: EH completeQuoted 7 lines
On boot, it seemed to hang the disk up for a good few minutes, even though nothing is using it at the moment (I have to manually bring up the mdraid0 array, so it can't possibly be mounted), and smartctl was erroring out for a while, but now its fine, and smart shows no issues.
I'm going to try without noapic on 2.6.30, and 2.6.31-rc5 and see what happens.
back with 2.6.30 apic enabled, all the traces are gone, but I still get the SATA errors, and a new message: ata8: SError: { HostInt }
[ 415.781659] ata8.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x6 frozen [ 415.781672] ata8: SError: { HostInt } [ 415.781687] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 415.781690] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x44 (timeout) [ 415.781697] ata8.00: status: { DRDY } [ 415.781708] ata8: hard resetting link [ 416.264190] ata8: softreset failed (device not ready) [ 416.264199] ata8: failed due to HW bug, retry pmp=0 [ 416.428196] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 416.440517] ata8.00: configured for UDMA/133 [ 416.440544] ata8: EH complete [ 424.781778] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 424.781798] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 424.781801] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 424.781809] ata8.00: status: { DRDY } [ 424.781820] ata8: hard resetting link [ 425.265677] ata8: softreset failed (device not ready) [ 425.265686] ata8: failed due to HW bug, retry pmp=0 [ 425.429546] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 425.442153] ata8.00: configured for UDMA/133 [ 425.442179] ata8: EH complete [ 458.482002] CE: hpet increasing min_delta_ns to 15000 nsec [ 499.780213] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 499.780233] ata8.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 499.780237] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 499.780244] ata8.00: status: { DRDY } [ 499.780256] ata8: hard resetting link [ 500.320191] ata8: softreset failed (device not ready) [ 500.320200] ata8: failed due to HW bug, retry pmp=0 [ 500.485084] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 500.497235] ata8.00: configured for UDMA/133 [ 500.497256] ata8: EH complete
Quoted 2 lines
And now with 2.6.31-rc5, instant ata exceptions, same as before (just no SError line this time).
I think I have an answer finally. Bad drive. I've plugged a new sata controller in, and I get the following from it:
[ 1581.172316] ata15: translated ATA stat/err 0x01/04 to SCSI SK/ASC/ASCQ
0xb/00/00
[ 1581.172325] ata15: status=0x01 { Error }
[ 1581.172333] ata15: error=0x04 { DriveStatusError }I assume that means the drive is at fault.
(one system lock up later...)
shortly after I wrote the above this appeared in dmesg:
Sep 3 16:33:59 natasha kernel: [ 1679.334788] ------------[ cut here ]------------ Sep 3 16:33:59 natasha kernel: [ 1679.334864] WARNING: at drivers/ata/libata- core.c:4910 __ata_qc_complete+0x5a/0xe1 [libata]() Sep 3 16:33:59 natasha kernel: [ 1679.334870] Hardware name: GA-MA790FXT-UD5P Sep 3 16:33:59 natasha kernel: [ 1679.334874] Modules linked in: fuse raid0
kvm_amd kvm powernow_k8 cpufreq_conservative cpufreq_stats cpufreq_userspace cpufreq_powersave nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc bridge stp ext4 jbd2 crc16 md_mod it87 hwmon_vid adt7473 firewire_sbp2 loop snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event amd64_edac_mod snd_seq edac_core snd_timer snd_seq_device evdev snd soundcore i2c_piix4 snd_page_alloc i2c_core parport_pc parport wmi processor button ext3 jbd mbcache dm_mod usbhid hid sd_mod ata_generic pata_jmicron crc_t10dif atiixp firewire_ohci mvsas firewire_core crc_itu_t libsas scsi_transport_sas ohci_hcd ide_pci_generic ehci_hcd ide_core ahci libata scsi_mod r8169 mii floppy thermal fan thermal_sys [last unloaded: scsi_wait_scan]
Sep 3 16:33:59 natasha kernel: [ 1679.334995] Pid: 0, comm: swapper Tainted: G W 2.6.31-rc5 #1 Sep 3 16:33:59 natasha kernel: [ 1679.335001] Call Trace: Sep 3 16:33:59 natasha kernel: [ 1679.335006] <IRQ> [<ffffffffa006a2ca>] ? __ata_qc_complete+0x5a/0xe1 [libata] Sep 3 16:33:59 natasha kernel: [ 1679.335097] [<ffffffffa006a2ca>] ? __ata_qc_complete+0x5a/0xe1 [libata] Sep 3 16:33:59 natasha kernel: [ 1679.335109] [<ffffffff8104a57b>] ? warn_slowpath_common+0x77/0xa3 Sep 3 16:33:59 natasha kernel: [ 1679.335154] [<ffffffffa006a2ca>] ? __ata_qc_complete+0x5a/0xe1 [libata] Sep 3 16:33:59 natasha kernel: [ 1679.335178] [<ffffffffa00ed9d3>] ? sas_ata_task_done+0x178/0x210 [libsas] Sep 3 16:33:59 natasha kernel: [ 1679.335199] [<ffffffffa01042ce>] ? mvs_slot_complete+0x3df/0x41b [mvsas] Sep 3 16:33:59 natasha kernel: [ 1679.335209] [<ffffffff810610fa>] ? ktime_get+0xc/0x41 Sep 3 16:33:59 natasha kernel: [ 1679.335218] [<ffffffff81023a86>] ? lapic_next_event+0x18/0x1d Sep 3 16:33:59 natasha kernel: [ 1679.335236] [<ffffffffa010439c>] ? mvs_int_rx+0x92/0x101 [mvsas] Sep 3 16:33:59 natasha kernel: [ 1679.335254] [<ffffffffa01072b6>] ? mvs_int_full+0x25/0x88 [mvsas] Sep 3 16:33:59 natasha kernel: [ 1679.335272] [<ffffffffa010734a>] ? mvs_64xx_isr+0x31/0x40 [mvsas] Sep 3 16:33:59 natasha kernel: [ 1679.335289] [<ffffffffa01030e5>] ? mvs_interrupt+0x61/0x78 [mvsas] Sep 3 16:33:59 natasha kernel: [ 1679.335298] [<ffffffff81089ea8>] ? handle_IRQ_event+0x58/0x135 Sep 3 16:33:59 natasha kernel: [ 1679.335306] [<ffffffff8108b595>] ? handle_fasteoi_irq+0x7d/0xb5 Sep 3 16:33:59 natasha kernel: [ 1679.335314] [<ffffffff8101388d>] ? handle_irq+0x17/0x1d Sep 3 16:33:59 natasha kernel: [ 1679.335321] [<ffffffff81012ee5>] ? do_IRQ+0x57/0xb6 Sep 3 16:33:59 natasha kernel: [ 1679.335329] [<ffffffff81011413>] ? ret_from_intr+0x0/0x11 Sep 3 16:33:59 natasha kernel: [ 1679.335333] <EOI> [<ffffffff8102b518>] ? native_safe_halt+0x2/0x3 Sep 3 16:33:59 natasha kernel: [ 1679.335349] [<ffffffff81017c3d>] ? default_idle+0x40/0x68 Sep 3 16:33:59 natasha kernel: [ 1679.335357] [<ffffffff8106790c>] ? clockevents_notify+0x2b/0x75 Sep 3 16:33:59 natasha kernel: [ 1679.335365] [<ffffffff8101804c>] ? c1e_idle+0xe5/0x10d Sep 3 16:33:59 natasha kernel: [ 1679.335374] [<ffffffff8100fd9b>] ? cpu_idle+0x50/0x91 Sep 3 16:33:59 natasha kernel: [ 1679.335380] ---[ end trace 56631d4c7d46fc1b ]--- Sep 3 16:34:00 natasha kernel: [ 1679.792256] CPU 2 Sep 3 16:34:00 natasha kernel: [ 1679.792260] Modules linked in: fuse raid0
kvm_amd kvm powernow_k8 cpufreq_conservative cpufreq_stats cpufreq_userspace cpufreq_powersave nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc bridge stp ext4 jbd2 crc16 md_mod it87 hwmon_vid adt7473 firewire_sbp2 loop snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event amd64_edac_mod snd_seq edac_core snd_timer snd_seq_device evdev snd soundcore i2c_piix4 snd_page_alloc i2c_core parport_pc parport wmi processor button ext3 jbd mbcache dm_mod usbhid hid sd_mod ata_generic pata_jmicron crc_t10dif atiixp firewire_ohci mvsas firewire_core crc_itu_t libsas scsi_transport_sas ohci_hcd ide_pci_generic ehci_hcd ide_core ahci libata scsi_mod r8169 mii floppy thermal fan thermal_sys [last unloaded: scsi_wait_scan]
Sep 3 16:34:00 natasha kernel: [ 1679.792384] Pid: 17, comm: events/2 Tainted: G W 2.6.31-rc5 #1 GA-MA790FXT-UD5P Sep 3 16:34:00 natasha kernel: [ 1679.792390] RIP: 0010:[<ffffffff810d23c3>] [<ffffffff810d23c3>] free_block+0x59/0x11e Sep 3 16:34:00 natasha kernel: [ 1679.792407] RSP: 0018:ffff88012fb97d90 EFLAGS: 00010046 Sep 3 16:34:00 natasha kernel: [ 1679.792413] RAX: ffffea0001be4700 RBX: ffff88007f8201c0 RCX: 0000000000000000 Sep 3 16:34:00 natasha kernel: [ 1679.792419] RDX: ffffea0000000000 RSI: ffff88012b96ca18 RDI: ffff88007f8201c0 Sep 3 16:34:00 natasha kernel: [ 1679.792425] RBP: ffff88012ad7c6c0 R08: 0000000000000000 R09: 00000000000000fa Sep 3 16:34:00 natasha kernel: [ 1679.792430] R10: 0000000000000000 R11: ffff88002806bf20 R12: 0000000000000000 Sep 3 16:34:00 natasha kernel: [ 1679.792435] R13: ffff88012b96ca18 R14: 000000000000020c R15: 0000000000000001 Sep 3 16:34:00 natasha kernel: [ 1679.792443] FS: 00007fe13b44e750(0000) GS:ffff88002805c000(0000) knlGS:00000000f65ffbb0 Sep 3 16:34:00 natasha kernel: [ 1679.792449] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b Sep 3 16:34:00 natasha kernel: [ 1679.792454] CR2: 00007f5d72294000 CR3: 00000000cb536000 CR4: 00000000000006e0 Sep 3 16:34:00 natasha kernel: [ 1679.792460] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Sep 3 16:34:00 natasha kernel: [ 1679.792465] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Sep 3 16:34:00 natasha kernel: [ 1679.792472] Process events/2 (pid: 17, threadinfo ffff88012fb96000, task ffff88012fb740c0) Sep 3 16:34:00 natasha kernel: [ 1679.792480] ffff88012e1ed500 ffff88012b96ca18 0000000000000001 ffff88012b96ca00 Sep 3 16:34:00 natasha kernel: [ 1679.792488] <0> ffff88012b9bb4c0 0000000000000000 ffff88012ad7c6c0 ffffffff810d25b2 Sep 3 16:34:00 natasha kernel: [ 1679.792498] <0> ffffffffa03d6840 0000000000011ab0 ffff88012b9bb4c0 ffff88012ad7c6c0 Sep 3 16:34:00 natasha kernel: [ 1679.792517] [<ffffffff810d25b2>] ? drain_array+0x89/0xc1 Sep 3 16:34:00 natasha kernel: [ 1679.792526] [<ffffffff810d299c>] ? cache_reap+0xde/0x212 Sep 3 16:34:00 natasha kernel: [ 1679.792535] [<ffffffff810d28be>] ? cache_reap+0x0/0x212 Sep 3 16:34:00 natasha kernel: [ 1679.792545] [<ffffffff8105a3da>] ? worker_thread+0x174/0x211 Sep 3 16:34:00 natasha kernel: [ 1679.792553] [<ffffffff8105e326>] ? autoremove_wake_function+0x0/0x2e Sep 3 16:34:00 natasha kernel: [ 1679.792561] [<ffffffff8105a266>] ? worker_thread+0x0/0x211 Sep 3 16:34:00 natasha kernel: [ 1679.792568] [<ffffffff8105dfd3>] ? kthread+0x84/0x8c Sep 3 16:34:00 natasha kernel: [ 1679.792577] [<ffffffff81011aea>] ? child_rip+0xa/0x20 Sep 3 16:34:00 natasha kernel: [ 1679.792587] [<ffffffff81027574>] ? flat_send_IPI_mask+0x0/0x5 Sep 3 16:34:00 natasha kernel: [ 1679.792594] [<ffffffff8105df4f>] ? kthread+0x0/0x8c Sep 3 16:34:00 natasha kernel: [ 1679.792600] [<ffffffff81011ae0>] ? child_rip+0x0/0x20 Sep 3 16:34:00 natasha kernel: [ 1679.792675] RSP <ffff88012fb97d90> Sep 3 16:34:00 natasha kernel: [ 1679.792681] ---[ end trace 56631d4c7d46fc1c
]---
fun times. It seems as though the mvsas driver is a little less robust than the ahci driver.
Signature · 2 lines
Thomas Fjellstrom [email protected]
Re: BIOS update == more errors (was Re: sata exception frozen timeout?)
In reply to Thomas FjellstromHello,
Quoted 22 lines · Thomas Fjellstrom
I've updated my bios to try and see if it would help at all (it did seem to fix other issues).
But now I'm getting the following warnings and errors from dmesg on boot:
(debian sid 2.6.30, with "noapic" to see if the original problem was an interupt issue, as everyone seems to have hinted at).[ 1.024337] ------------[ cut here ]------------ [ 1.024408] WARNING: at /build/buildd-linux-2.6_2.6.30-6-amd64- s9DPiZ/linux-2.6-2.6.30/debian/build/source_amd64_none/drivers/ata/libata- core.c:6174 ata_host_activate+0x47/0xe0 [libata]() [ 1.024492] Hardware name: GA-MA790FXT-UD5P [ 1.024546] Modules linked in: crc_itu_t atiixp(+) ide_core pata_jmicron ahci(+) ehci_hcd(+) libata scsi_mod r8169 mii thermal fan thermal_sys [ 1.025196] Pid: 796, comm: work_for_cpu Not tainted 2.6.30-1-amd64 #1 [ 1.025252] Call Trace: [ 1.025318] [<ffffffffa0056101>] ? ata_host_activate+0x47/0xe0 [libata] [ 1.025385] [<ffffffffa0056101>] ? ata_host_activate+0x47/0xe0 [libata] [ 1.025445] [<ffffffff8024237f>] ? warn_slowpath_common+0x77/0xa3 [ 1.025505] [<ffffffffa008e598>] ? ahci_interrupt+0x0/0x454 [ahci] [ 1.025572] [<ffffffffa0056101>] ? ata_host_activate+0x47/0xe0 [libata] [ 1.025632] [<ffffffffa008e578>] ? ahci_init_one+0xbb4/0xbd4 [ahci]
Quoted 8 lines
[ 1.025691] [<ffffffff8025136e>] ? do_work_for_cpu+0x0/0x1b [ 1.025749] [<ffffffff8035fa16>] ? local_pci_probe+0x12/0x16 [ 1.025806] [<ffffffff80251379>] ? do_work_for_cpu+0xb/0x1b [ 1.025862] [<ffffffff80254382>] ? kthread+0x54/0x80 [ 1.025918] [<ffffffff80210aca>] ? child_rip+0xa/0x20 [ 1.025975] [<ffffffff8025432e>] ? kthread+0x0/0x80 [ 1.026030] [<ffffffff80210ac0>] ? child_rip+0x0/0x20 [ 1.026085] ---[ end trace 54d3fd405814ad85 ]---
This means that the controller wasn't assigned an irq. Newer BIOSen often break IRQ routing on !acpi.
Quoted 6 lines
[ 14.872233] ata10.15: qc timeout (cmd 0xe4) [ 14.872925] ata10.15: failed to read PMP GSCR[0] (Emask=0x4) [ 14.873256] ata9.15: qc timeout (cmd 0xe4) [ 14.873344] ata10: limiting SATA link speed to 1.5 Gbps [ 14.874008] ata9.15: failed to read PMP GSCR[0] (Emask=0x4) [ 14.874271] ata9: limiting SATA link speed to 1.5 Gbps
So, probing of course can't be done properly.
Quoted 34 lines
[ 15.548002] irq 7: nobody cared (try booting with the "irqpoll" option) [ 15.548121] Pid: 0, comm: swapper Tainted: G W 2.6.30-1-amd64 #1 [ 15.548240] Call Trace: [ 15.548346] <IRQ> [<ffffffff8027fe0f>] ? __report_bad_irq+0x30/0x7d [ 15.548569] [<ffffffff8027ff61>] ? note_interrupt+0x105/0x170 [ 15.548689] [<ffffffff802805f1>] ? handle_level_irq+0x7c/0xaf [ 15.548809] [<ffffffff80212655>] ? handle_irq+0x17/0x1d [ 15.548929] [<ffffffff80211e7c>] ? do_IRQ+0x57/0xbf [ 15.549044] [<ffffffff80210453>] ? ret_from_intr+0x0/0x11 [ 15.549161] <EOI> [<ffffffff8064e140>] ? early_idt_handler+0x0/0x71 [ 15.549379] [<ffffffff80227520>] ? native_safe_halt+0x2/0x3 [ 15.549497] [<ffffffff80216995>] ? default_idle+0x40/0x68 [ 15.549612] [<ffffffff8025d784>] ? clockevents_notify+0x2b/0x75 [ 15.549730] [<ffffffff80216d48>] ? c1e_idle+0xe5/0x10d [ 15.549848] [<ffffffff8020edda>] ? cpu_idle+0x50/0x91 [ 15.549963] [<ffffffff8064ec62>] ? start_kernel+0x37a/0x386 [ 15.550081] [<ffffffff8064e3b7>] ? x86_64_start_kernel+0xf9/0x106 [ 15.550199] handlers: [ 15.550311] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e) [ 15.550630] Disabling IRQ #7 [ 15.636304] irq 11: nobody cared (try booting with the "irqpoll" option) [ 15.636377] Pid: 0, comm: swapper Tainted: G W 2.6.30-1-amd64 #1 [ 15.636434] Call Trace: [ 15.636486] <IRQ> [<ffffffff8027fe0f>] ? __report_bad_irq+0x30/0x7d [ 15.636586] [<ffffffff8027ff61>] ? note_interrupt+0x105/0x170 [ 15.636643] [<ffffffff802805f1>] ? handle_level_irq+0x7c/0xaf [ 15.636699] [<ffffffff80212655>] ? handle_irq+0x17/0x1d [ 15.636755] [<ffffffff80211e7c>] ? do_IRQ+0x57/0xbf [ 15.636811] [<ffffffff80210453>] ? ret_from_intr+0x0/0x11 [ 15.636866] <EOI> [<ffffffff8064e140>] ? early_idt_handler+0x0/0x71 [ 15.636966] [<ffffffff80227520>] ? native_safe_halt+0x2/0x3 [ 15.637022] [<ffffffff80216995>] ? default_idle+0x40/0x68 [ 15.637078] [<ffffffff8025d784>] ? clockevents_notify+0x2b/0x75 [ 15.637135] [<ffffffff80216d48>] ? c1e_idle+0xe5/0x10d
Quoted 8 lines
[ 15.637191] [<ffffffff8020edda>] ? cpu_idle+0x50/0x91 [ 15.637247] [<ffffffff8064ec62>] ? start_kernel+0x37a/0x386 [ 15.637304] [<ffffffff8064e3b7>] ? x86_64_start_kernel+0xf9/0x106 [ 15.637359] handlers: [ 15.637411] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e) [ 15.637549] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e) [ 15.637687] [<ffffffff803de867>] (usb_hcd_irq+0x0/0x7e) [ 15.637825] Disabling IRQ #11
And two nobody cared. As the kernel doesn't have much idea how the IRQs are being routed. Hell breaking loose isn't much of a surprise.
Quoted 16 lines
[ 198.322072] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 198.322080] ata8.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0
[ 198.322081] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 198.322083] ata8.00: status: { DRDY }
[ 198.322088] ata8: hard resetting link
[ 198.916035] ata8: softreset failed (device not ready)
[ 198.916039] ata8: failed due to HW bug, retry pmp=0
[ 199.080024] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 199.092059] ata8.00: configured for UDMA/133
[ 199.092072] ata8: EH complete
[ 227.900583] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 227.900590] ata8.00: cmd b0/d8:00:01:4f:c2/00:00:00:00:00/00 tag 0
[ 227.900591] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 Quoted 1 line
(timeout)
Does disabling smartd make any difference?
Thanks.
Signature · 1 line
tejun