ar9170: implement frequency calibration for one-stage/openfw
PATCH 1/1 ar9170: implement frequency calibration for one-stage/openfw
This patch ports some code from the vendor driver, which is supposed to upload the right calibration values for the chosen frequency.
In theory, this should give a better range and throughput for all users with the open, or one-stage firmware.
---
drivers/net/wireless/ath/ar9170/phy.c +122 -0
@@ -987,6 +987,124 @@ static u8 ar9170_interpolate_u8(u8 x, u8 x1, u8 y1, u8 x2, u8 y2)#undef SHIFT } +static u8 ar9170_interpolate_val (u8 x,u8 *x_array,u8 *y_array) +{ +int i; + +for (i =0 ; i <3 ; i++) +if (x <= x_array[i +1 ]) +break ; + +return ar9170_interpolate_u8 (x, + x_array[i], + y_array[i], + x_array[i +1 ], + y_array[i +1 ]); +} + +static int ar9170_set_freq_cal_data (struct ar9170 *ar, +struct ieee80211_channel *channel) +{ +u8 *cal_freq_pier; +u8 vpds[2 ][AR5416_PD_GAIN_ICEPTS ]; +u8 pwrs[2 ][AR5416_PD_GAIN_ICEPTS ]; +int chain, idx, i; +u8 f; + +switch (channel->band) { +case IEEE80211_BAND_2GHZ : + f = channel->center_freq -2300 ; + cal_freq_pier = ar->eeprom.cal_freq_pier_2G; + i =AR5416_NUM_2G_CAL_PIERS -1 ; +break ; + +case IEEE80211_BAND_5GHZ : + f = (channel->center_freq -4800 ) /5 ; + cal_freq_pier = ar->eeprom.cal_freq_pier_5G; + i =AR5416_NUM_5G_CAL_PIERS -1 ; +break ; + +default : +return -EINVAL ; +break ; + } + +for (; i >=0 ; i--) { +if (cal_freq_pier[i] !=0xff ) +break ; + } +if (i <0 ) +return -EINVAL ; + + idx =ar9170_find_freq_idx (i, cal_freq_pier, f); + +ar9170_regwrite_begin (ar); + +for (chain =0 ; chain <AR5416_MAX_CHAINS ; chain++) { +for (i =0 ; i <AR5416_PD_GAIN_ICEPTS ; i++) { +struct ar9170_calibration_data_per_freq *cal_pier_data; +int j; + +switch (channel->band) { +case IEEE80211_BAND_2GHZ : + cal_pier_data = &ar->eeprom. + cal_pier_data_2G[chain][idx]; +break ; + +case IEEE80211_BAND_5GHZ : + cal_pier_data = &ar->eeprom. + cal_pier_data_5G[chain][idx]; +break ; + +default : +return -EINVAL ; + } + +for (j =0 ; j <2 ; j++) { + vpds[j][i] =ar9170_interpolate_u8 (f, + cal_freq_pier[idx], + cal_pier_data->vpd_pdg[j][i], + cal_freq_pier[idx +1 ], + cal_pier_data[1 ].vpd_pdg[j][i]); + + pwrs[j][i] =ar9170_interpolate_u8 (f, + cal_freq_pier[idx], + cal_pier_data->pwr_pdg[j][i], + cal_freq_pier[idx +1 ], + cal_pier_data[1 ].pwr_pdg[j][i]) /2 ; + } + } + +for (i =0 ; i <76 ; i++) { +u32 phy_data; +u8 tmp; + +if (i <25 ) { + tmp =ar9170_interpolate_val (i, &pwrs[0 ][0 ], + &vpds[0 ][0 ]); + }else { + tmp =ar9170_interpolate_val (i -12 , + &pwrs[1 ][0 ], + &vpds[1 ][0 ]); + } + + phy_data |= tmp << ((i &3 ) <<3 ); +if ((i &3 ) ==3 ) { +ar9170_regwrite (0x1c6280 + chain *0x1000 + + (i & ~3 ), phy_data); + phy_data =0 ; + } + } + +for (i =19 ; i <32 ; i++) +ar9170_regwrite (0x1c6280 + chain *0x1000 + (i <<2 ), +0x0 ); + } + +ar9170_regwrite_finish (); +return ar9170_regwrite_result (); +} +static int ar9170_set_power_cal (struct ar9170 *ar,u32 freq,enum ar9170_bw bw) {struct ar9170_calibration_target_power_legacy *ctpl;
@@ -1207,6 +1325,10 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,if (err)return err; + err =ar9170_set_freq_cal_data (ar, channel); +if (err) +return err; + err =ar9170_set_power_cal (ar, channel->center_freq, bw);if (err)return err;
Quoted 13 lines · On Thu, 3 Sep 2009 20:25:31 +0200 Christian Lamparter…
This patch ports some code from the vendor driver, which is supposed to upload the right calibration values for the chosen frequency.
In theory, this should give a better range and throughput for all users with the open, or one-stage firmware.
...
drivers/net/wireless/ath/ar9170/phy.c +4
-0+for (i =0 ; i <76 ; i++) { +u32 phy_data; +u8 tmp; +
drivers/net/wireless/ath/ar9170/phy.c static u8 ar9170_interpolate_u8(u8 x, u8 x1, u8 y1, u8 x2, u8 y2) · line 1091
Quoted 10 lines
drivers/net/wireless/ath/ar9170/phy.c +10
-0+if (i <25 ) { + tmp =ar9170_interpolate_val (i, &pwrs[0 ][0 ], + &vpds[0 ][0 ]); + }else { + tmp =ar9170_interpolate_val (i -12 , + &pwrs[1 ][0 ], + &vpds[1 ][0 ]); + } + + phy_data |= tmp << ((i &3 ) <<3 );
Clearly buggy and the compiler warns. The value of phy_data is unknown here.
How did this get all the way into mainline?
Quoted 30 lines · Andrew Morton
Quoted 13 lines · On Thu, 3 Sep 2009 20:25:31 +0200 Christian Lamparter…
This patch ports some code from the vendor driver, which is supposed to upload the right calibration values for the chosen frequency.
In theory, this should give a better range and throughput for all users with the open, or one-stage firmware.
...
drivers/net/wireless/ath/ar9170/phy.c +4
-0+for (i =0 ; i <76 ; i++) { +u32 phy_data; +u8 tmp; +drivers/net/wireless/ath/ar9170/phy.c static u8 ar9170_interpolate_u8(u8 x, u8 x1, u8 y1, u8 x2, u8 y2) · line 1091
Quoted 10 lines
drivers/net/wireless/ath/ar9170/phy.c +10
-0+if (i <25 ) { + tmp =ar9170_interpolate_val (i, &pwrs[0 ][0 ], + &vpds[0 ][0 ]); + }else { + tmp =ar9170_interpolate_val (i -12 , + &pwrs[1 ][0 ], + &vpds[1 ][0 ]); + } + + phy_data |= tmp << ((i &3 ) <<3 );Clearly buggy and the compiler warns. The value of
phy_datais unknown here.
Quoted 1 line
How did this get all the way into mainline?
Strangely it compiles without any warning for me with the latest linux-wireless:
joerg@nc10:~/src/wireless.gits/wireless-testing$ gcc --version
gcc (Ubuntu 4.3.3-5ubuntu4) 4.3.3
joerg@nc10:~/src/wireless.gits/wireless-testing$ git describe
v2.6.31-38258-g389ce02
joerg@nc10:~/src/wireless.gits/wireless-testing/drivers/net/wireless/ath/ar9170$ grep phy_data phy.c
u32 phy_data;
phy_data |= tmp << ((i & 3) << 3);
(i & ~3), phy_data);
phy_data = 0;joerg@nc10:~/src/wireless.gits/wireless-testing$ make modules ... CC [M] drivers/net/wireless/ath/ar9170/mac.o CC [M] drivers/net/wireless/ath/ar9170/phy.o CC [M] drivers/net/wireless/ath/ar9170/led.o
make V=1 says:
gcc -Wp,-MD,drivers/net/wireless/ath/ar9170/.phy.o.d -nostdinc -isystem/usr/lib/gcc/i486-linux-gnu/4.3.3/include -Iinclude -I/home/joerg/src/wireless.gits/wireless-testing/arch/x86/include -include include/linux/autoconf.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march=i686 -mtune=pentium3 -mtune=generic -Wa,-mtune=generic32 -ffreestanding -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -fno-stack-protector -fno-omit-frame-pointer -fno-optimize-sibling-calls -g -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(phy)" -D"KBUILD_MODNAME=KBUILD_STR(ar9170usb)" -c -o drivers/net/wireless/ath/ar9170/.tmp_phy.o drivers/net/wireless/ath/ar9170/phy.c
Adding "-Wuninitialized" didn't help, acc. to the doc it is switched on with -Wall for -O2.
Is this a regression of gcc?
Regards,
Jörg.
Quoted 31 lines · Joerg Albert
Quoted 30 lines · Andrew Morton
Quoted 13 lines · On Thu, 3 Sep 2009 20:25:31 +0200 Christian Lamparter…
This patch ports some code from the vendor driver, which is supposed to upload the right calibration values for the chosen frequency.
In theory, this should give a better range and throughput for all users with the open, or one-stage firmware.
...
(quoted diff) +4
-0+ for (i = 0; i < 76; i++) { + u32 phy_data; + u8 tmp; +Review
Quoted 10 lines
(quoted diff) +10
-0+ if (i < 25) { + tmp = ar9170_interpolate_val(i, &pwrs[0][0], + &vpds[0][0]); + } else { + tmp = ar9170_interpolate_val(i - 12, + &pwrs[1][0], + &vpds[1][0]); + } + + phy_data |= tmp << ((i & 3) << 3);Clearly buggy and the compiler warns. The value of
phy_datais unknown here.
Quoted 3 lines
Quoted 1 line
How did this get all the way into mainline?
Strangely it compiles without any warning for me with the latest linux-wireless:
That is strange -- no warning here (F-11) either...
Christian, care to propose a patch? Or maybe just something like this?
drivers/net/wireless/ath/ar9170/phy.c +1 -1
@@ -1220,7 +1220,7 @@ static int ar9170_set_freq_cal_data(struct ar9170 *ar, &vpds[1][0]); } - phy_data |= tmp << ((i &3 ) <<3 ); + phy_data = tmp << ((i &3 ) <<3 );if ((i &3 ) ==3 ) {ar9170_regwrite (0x1c6280 + chain *0x1000 + (i & ~3 ), phy_data);
John
Signature · 2 lines
John W. Linville Someday the world will need a hero, and you [email protected] might be all we have. Be ready.
2009/9/28 John W. Linville <[email protected]>:
Quoted 54 lines · Joerg Albert
Quoted 31 lines · Andrew Morton
Quoted 30 lines
Quoted 13 lines · On Thu, 3 Sep 2009 20:25:31 +0200 Christian Lamparter…
This patch ports some code from the vendor driver, which is supposed to upload the right calibration values for the chosen frequency.
In theory, this should give a better range and throughput for all users with the open, or one-stage firmware.
...
+ for (i = 0; i < 76; i++) {
+ u32phy_data;
+ u8 tmp;(quoted diff) +1
-0+Review
Quoted 10 lines
(quoted diff) +10
-0+ if (i < 25) { + tmp = ar9170_interpolate_val(i, &pwrs[0][0], + &vpds[0][0]); + } else { + tmp = ar9170_interpolate_val(i - 12, + &pwrs[1][0], + &vpds[1][0]); + } + + phy_data |= tmp << ((i & 3) << 3);Clearly buggy and the compiler warns. The value of
phy_datais unknown here.Quoted 3 lines
Quoted 1 line
How did this get all the way into mainline?
Strangely it compiles without any warning for me with the latest linux-wireless:
That is strange -- no warning here (F-11) either...
Christian, care to propose a patch? Or maybe just something like this?
drivers/net/wireless/ath/ar9170/phy.c +1
-1@@ -1220,7 +1220,7 @@ static int ar9170_set_freq_cal_data(struct ar9170 *ar, &vpds[1][0]); } - phy_data |= tmp << ((i & 3) << 3); + phy_data = tmp << ((i & 3) << 3); if ((i & 3) == 3) {ar9170_regwrite(0x1c6280 + chain *
0x1000+ (i & ~3),phy_data);
Quoted 1 line
John
no? Andrew Morton's mail included a tiny patch which initializes the phy_data to 0. I assumed you would pick it up right away... Or is there something which would prevent it from including?
Regards,
Chr
Quoted 26 lines · Christian Lamparter
2009/9/28 John W. Linville <[email protected]>:
Quoted 25 lines · Joerg Albert
Quoted 5 lines · Andrew Morton
Quoted 2 lines
How did this get all the way into mainline?
Strangely it compiles without any warning for me with the latest linux-wireless:
That is strange -- no warning here (F-11) either...
Christian, care to propose a patch? Or maybe just something like this?
drivers/net/wireless/ath/ar9170/phy.c +1
-1@@ -1220,7 +1220,7 @@ static int ar9170_set_freq_cal_data(struct ar9170 *ar, &vpds[1][0]); } - phy_data |= tmp << ((i & 3) << 3); + phy_data = tmp << ((i & 3) << 3); if ((i & 3) == 3) {ar9170_regwrite(0x1c6280 + chain *
0x1000+ (i & ~3),phy_data);
Quoted 4 lines
Quoted 1 line
John
no? Andrew Morton's mail included a tiny patch which initializes the
phy_datato 0. I assumed you would pick it up right away... Or is there something which would prevent it from including?
Don't know what email you got, but there was no patch in my inbox...
So, I presume you have no objection to the patch above? Initializing phy_data just to unconditionally assign to it doesn't seem any better.
John
Signature · 2 lines
John W. Linville Someday the world will need a hero, and you [email protected] might be all we have. Be ready.