Skip to contentSkip to conversation

I2C: add new AMD SMBus device ID

PATCH In review Crane Cai 2 participants 3 messages Sep 10, 2009 – Sep 11, 2009

Subsystems (3)
lore
Share & tools
lore

Crane Cai

author
#0 lore raw

PATCH 1/1 I2C: add new AMD SMBus device ID

Add new SMBus device ID for SB900

---
Hi Jean,

We follow your point, new patch submitted, please apply.

Thanks,
- Crane
---

---
 drivers/i2c/busses/i2c-piix4.c |    8 +++++---
 include/linux/pci_ids.h        |    1 +
 2 files changed, 6 insertions(+), 3 deletions(-)
drivers/i2c/busses/i2c-piix4.c +5 -3
index 0249a7d..a75d216 100644
@@ -479,6 +479,7 @@ static struct pci_device_id piix4_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
 		     PCI_DEVICE_ID_SERVERWORKS_OSB4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
@@ -499,9 +500,10 @@ static int __devinit piix4_probe(struct pci_dev *dev,
 {
 	int retval;
 
-	if ((dev->vendor == PCI_VENDOR_ID_ATI) &&
-	    (dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) &&
-	    (dev->revision >= 0x40))
+	if ((dev->vendor == PCI_VENDOR_ID_ATI &&
+	     dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
+	     dev->revision >= 0x40) ||
+	    dev->vendor == PCI_VENDOR_ID_AMD)
 		/* base address location etc changed in SB800 */
 		retval = piix4_setup_sb800(dev, id);
 	else
include/linux/pci_ids.h +1 -0
index 73b46b6..0786ccd 100644
@@ -537,6 +537,7 @@
 #define PCI_DEVICE_ID_AMD_8131_BRIDGE	0x7450
 #define PCI_DEVICE_ID_AMD_8131_APIC	0x7451
 #define PCI_DEVICE_ID_AMD_8132_BRIDGE	0x7458
+#define PCI_DEVICE_ID_AMD_SB900_SMBUS	0x780b
 #define PCI_DEVICE_ID_AMD_CS5536_ISA    0x2090
 #define PCI_DEVICE_ID_AMD_CS5536_FLASH  0x2091
 #define PCI_DEVICE_ID_AMD_CS5536_AUDIO  0x2093
Signature · 1 line
1.6.0.4
#1 lore raw

Hi Crane,

Quoted 6 lines · Crane Cai

Add new SMBus device ID for SB900

---
Hi Jean,

We follow your point, new patch submitted, please apply.

Applied, thanks. FYI, I also had to list the SB900 in
Documentation/i2c/busses/i2c-piix4 and drivers/i2c/busses/Kconfig. Next
time, please include these changes in your patch. The completed patch
can be seen at:
ftp://ftp.kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/i2c-piix4-add-amd-SB900-smbus-device-id.patch

Will a datasheet for the SB900 be released to the public at some point in the future? That would be useful for us developers.

Thanks,

Signature · 2 lines
Jean Delvare
http://khali.linux-fr.org/wishlist.html
author
#2 lore raw

Hi Jean,

Quoted 5 lines · Jean Delvare

Applied, thanks. FYI, I also had to list the SB900 in
Documentation/i2c/busses/i2c-piix4 and drivers/i2c/busses/Kconfig. Next
time, please include these changes in your patch. The completed patch
can be seen at:
ftp://ftp.kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/i2c-piix4-add-amd-SB900-smbus-device-id.patch

Thanks.

Quoted 3 lines

Will a datasheet for the SB900 be released to the public at some point in the future? That would be useful for us developers.

Yes, in future.

Signature · 2 lines
Best Regards,
- Crane