Questions about Terratec Hybrid XS (em2882) [0ccd:005e]
Hello.
I have the Terratec Cinergy Hybrid T XS USB (em2882) - usb-id 0ccd:005e. It works with Marcus Rechberger's em28xx-new driver, but since that code is unmaintained now, I tested this device with v4l-dvb today.
The analog picture is there, but audio is very, very quiet, almost not there. Is there some way to increase the volume?
Second question, what would be required to get DVB working?
The final thing is not a question, it's actually something that works:
the remote. It's the same one as comes with the other Hybrid XS (0ccd:0042), adding these two lines to the definition of this card in em28xx-cards.c makes it work:
.ir_codes = &ir_codes_terratec_cinergy_xs_table,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
Any pointers to solving my issues (analog audio, dvb) appreciated. I can test patches, I can give ssh access to my machine if it helps. There's even a Windows install on this machine, so USB sniffing of the Windows driver is possible, I just need instructions on what exactly to do. Dmesg output for this device is attached.
Regards,
Uroš
usb 1-4: new high speed USB device using ehci_hcd and address 6
usb 1-4: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS (2882) @ 480 Mbps (0ccd:005e, interface 0, class 0) em28xx #0: chip ID is em2882/em2883
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c
em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03
em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00
em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03
em28xx #0: i2c eeprom e0: 30 00 36 00 30 00 39 00 30 00 32 00 30 00 31 00
em28xx #0: i2c eeprom f0: 33 00 38 00 34 00 33 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x7713bfbe
em28xx #0: EEPROM info:
em28xx #0: AC97 audio (5 sample rates) em28xx #0: 500mA max power em28xx #0: Table at 0x27, strings=0x409e, 0x1cde, 0x346a
em28xx #0: Identified as Terratec Hybrid XS (em2882) (card=55) em28xx #0:
em28xx #0: The support for this board weren't valid yet. em28xx #0: Please send a report of having this working em28xx #0: not to V4L mailing list (and/or to other addresses)
tvp5150 4-005c: chip found @ 0xb8 (em28xx #0)
tuner 4-0061: chip found @ 0xc2 (em28xx #0)
xc2028 4-0061: creating new instance
xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner
usb 1-4: firmware: requesting xc3028-v27.fw
xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 4-0061: Loading firmware for type=BASE (1), id 0000000000000000.
xc2028 4-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 4-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. em28xx #0: Config register raw data: 0xd0
em28xx #0: AC97 vendor ID = 0xffffffff
em28xx #0: AC97 features = 0x6a90
em28xx #0: Empia 202 AC97 audio processor detected
tvp5150 4-005c: tvp5150am1 detected.
em28xx #0: v4l2 driver version 0.1.2
em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
usbcore: registered new interface driver em28xx
em28xx driver loadedem28xx-audio.c: probing for em28x1 non standard usbaudioem28xx-audio.c: Copyright (C) 2006 Markus Rechberger
Em28xx: Initialized (Em28xx Audio Extension) extension
tvp5150 4-005c: tvp5150am1 detected.
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. xc2028 4-0061: Loading firmware for type=(0), id 0000000100000007.
xc2028 4-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
Hello.
Partial success. With the attached patch, DVB works. But I have no idea how to get analog audio working correctly. Any help would be appreciated.
Regards,
Uroš
Quoted 81 lines · Uros Vampl
Hello.
I have the Terratec Cinergy Hybrid T XS USB (em2882) - usb-id 0ccd:005e. It works with Marcus Rechberger's em28xx-new driver, but since that code is unmaintained now, I tested this device with v4l-dvb today.
The analog picture is there, but audio is very, very quiet, almost not there. Is there some way to increase the volume?
Second question, what would be required to get DVB working?
The final thing is not a question, it's actually something that works:
the remote. It's the same one as comes with the other Hybrid XS (0ccd:0042), adding these two lines to the definition of this card inem28xx-cards.cmakes it work:.ir_codes =
&ir_codes_terratec_cinergy_xs_table,
.xclk =EM28XX_XCLK_FREQUENCY_12MHZ,Any pointers to solving my issues (analog audio, dvb) appreciated. I can test patches, I can give ssh access to my machine if it helps. There's even a Windows install on this machine, so USB sniffing of the Windows driver is possible, I just need instructions on what exactly to do. Dmesg output for this device is attached.
Regards,
Urošusb 1-4: new high speed USB device using
ehci_hcdand address 6
usb 1-4: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS (2882) @ 480 Mbps (0ccd:005e, interface 0, class 0) em28xx #0: chip ID is em2882/em2883
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c
em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03
em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00
em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03
em28xx #0: i2c eeprom e0: 30 00 36 00 30 00 39 00 30 00 32 00 30 00 31 00
em28xx #0: i2c eeprom f0: 33 00 38 00 34 00 33 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID=0x9567eb1a, EEPROM hash =0x7713bfbe
em28xx #0: EEPROM info:em28xx #0: AC97 audio (5 sample rates) em28xx #0: 500mA max power em28xx #0: Table at 0x27, strings=0x409e, 0x1cde, 0x346aem28xx #0: Identified as Terratec Hybrid XS (em2882) (card=55) em28xx #0:
em28xx #0: The support for this board weren't valid yet. em28xx #0: Please send a report of having this working em28xx #0: not to V4L mailing list (and/or to other addresses)
tvp5150 4-005c: chip found @
0xb8(em28xx #0)
tuner 4-0061: chip found @0xc2(em28xx #0)
xc2028 4-0061: creating new instance
xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner
usb 1-4: firmware: requesting xc3028-v27.fw
xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 4-0061: Loading firmware for type=BASE (1), id 0000000000000000.
xc2028 4-0061: Loading firmware for type=(0), id000000000000b700.
SCODE (20000000), id000000000000b700:
xc2028 4-0061: Loading SCODE for type=MONO SCODEHAS_IF_4320(60008000), id 0000000000008000. em28xx #0: Config register raw data:0xd0
em28xx #0: AC97 vendor ID =0xffffffff
em28xx #0: AC97 features =0x6a90
em28xx #0: Empia 202 AC97 audio processor detected
tvp5150 4-005c: tvp5150am1 detected.
em28xx #0: v4l2 driver version 0.1.2
em28xx #0: V4L2 device registered as/dev/video0and/dev/vbi0
usbcore: registered new interface driver em28xx
Quoted 8 lines
em28xx driver loaded
em28xx-audio.c: probing for em28x1 non standard usbaudioem28xx-audio.c: Copyright (C) 2006 Markus Rechberger
Em28xx: Initialized (Em28xx Audio Extension) extension
tvp5150 4-005c: tvp5150am1 detected.
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. xc2028 4-0061: Loading firmware for type=(0), id 0000000100000007.
xc2028 4-0061: Loading SCODE for type=MONO SCODEHAS_IF_5320(60008000), id0000000f00000007.
linux/drivers/media/video/em28xx/em28xx-cards.c +1 -2
@@ -1442,10 +1442,8 @@ .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, -#if 0 /* FIXME: add an entry at em28xx-dvb */ .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, -#endif .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0,
@@ -2119,6 +2117,7 @@switch (dev->model) {case EM2880_BOARD_EMPIRE_DUAL_TV :case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 : +case EM2882_BOARD_TERRATEC_HYBRID_XS : ctl->demod =XC3028_FE_ZARLINK456 ;break ;case EM2880_BOARD_TERRATEC_HYBRID_XS :
linux/drivers/media/video/em28xx/em28xx-dvb.c +1 -0
@@ -494,6 +494,7 @@ }break ;case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 : +case EM2882_BOARD_TERRATEC_HYBRID_XS :case EM2880_BOARD_EMPIRE_DUAL_TV : dvb->frontend = dvb_attach(zl10353_attach, &em28xx_zl10353_xc3028_no_i2c_gate,
Quoted 8 lines · Uros Vampl
Hello.
Partial success. With the attached patch, DVB works. But I have no idea how to get analog audio working correctly. Any help would be appreciated.
Regards,
Uroš
Hello Uroš,
Sorry I somehow missed your previous email. I have a patch already which should make the device work correctly, and am issuing a PULL request for it this week.
Regarding the analog audio, I'm not sure how you are testing, but if you are using tvtime, it is known that tvtime does not support analog audio for raw devices such as this. You need to run arecord/aplay in a separate window.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 16 lines · Devin Heitmueller
Quoted 8 lines · Uros Vampl
Hello.
Partial success. With the attached patch, DVB works. But I have no idea how to get analog audio working correctly. Any help would be appreciated.
Regards,
UrošHello Uroš,
Sorry I somehow missed your previous email. I have a patch already which should make the device work correctly, and am issuing a PULL request for it this week.
Quoted 6 lines
Regarding the analog audio, I'm not sure how you are testing, but if you are using tvtime, it is known that tvtime does not support analog audio for raw devices such as this. You need to run arecord/aplay in a separate window.
Devin
Hi,
I tried arecord/aplay and sox with tvtime, and also mplayer (which has
built-in audio support). I know about these tricks, I've used them successfully with Markus' em28xx-new driver. But with v4l-dvb it's as I said, audio is there but it's extremely quiet. If you have suggestions how I should try to diagnoze this, I'm all ears.
Regards,
Uroš
Quoted 9 lines · Uros Vampl
I tried arecord/aplay and sox with tvtime, and also mplayer (which has
built-in audio support). I know about these tricks, I've used them successfully with Markus' em28xx-new driver. But with v4l-dvb it's as I said, audio is there but it's extremely quiet. If you have suggestions how I should try to diagnoze this, I'm all ears.Regards,
Uroš
If the audio is present but very quiet, then it's probably some issue you are having with your mixer. I would check your ALSA and PulseAudio configuration (in particular the mixer volume controls).
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 8 lines · Devin Heitmueller
Quoted 7 lines · Uros Vampl
I tried arecord/aplay and sox with tvtime, and also mplayer (which has
built-in audio support). I know about these tricks, I've used them successfully with Markus' em28xx-new driver. But with v4l-dvb it's as I said, audio is there but it's extremely quiet. If you have suggestions how I should try to diagnoze this, I'm all ears.
Quoted 8 lines
Quoted 2 lines
Regards,
UrošIf the audio is present but very quiet, then it's probably some issue you are having with your mixer. I would check your ALSA and PulseAudio configuration (in particular the mixer volume controls).
Devin
No PulseAudio here. And I've played plenty with the ALSA mixer, all the sliders that are there.
Using em28xx-new instead of v4l-dvb, all else being equal, tv volume is fine. So there's gotta be a difference somewhere in the way em28xx-new sets up audio compared to how v4l-dvb does it.
Regards,
Uroš
Quoted 16 lines · Uros Vampl
Quoted 15 lines · Devin Heitmueller
Quoted 9 lines · Uros Vampl
I tried arecord/aplay and sox with tvtime, and also mplayer (which has
built-in audio support). I know about these tricks, I've used them successfully with Markus' em28xx-new driver. But with v4l-dvb it's as I said, audio is there but it's extremely quiet. If you have suggestions how I should try to diagnoze this, I'm all ears.Regards,
UrošIf the audio is present but very quiet, then it's probably some issue you are having with your mixer. I would check your ALSA and PulseAudio configuration (in particular the mixer volume controls).
Quoted 8 lines
Quoted 1 line
Devin
No PulseAudio here. And I've played plenty with the ALSA mixer, all the sliders that are there.
Using em28xx-new instead of v4l-dvb, all else being equal, tv volume is fine. So there's gotta be a difference somewhere in the way em28xx-new sets up audio compared to how v4l-dvb does it.
Interesting. Have you tried the A/V inputs (as opposed to the tuner)?
That might help us identify whether it's an issue with the xc3028
tuner chip extracting the audio carrier or whether it's something about the way we are programming the emp202.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 9 lines · Devin Heitmueller
Quoted 9 lines
Quoted 5 lines
If the audio is present but very quiet, then it's probably some issue you are having with your mixer. I would check your ALSA and PulseAudio configuration (in particular the mixer volume controls).
Devin
No PulseAudio here. And I've played plenty with the ALSA mixer, all the sliders that are there.
Quoted 8 lines
Quoted 3 lines
Using em28xx-new instead of v4l-dvb, all else being equal, tv volume is fine. So there's gotta be a difference somewhere in the way em28xx-new sets up audio compared to how v4l-dvb does it.
Interesting. Have you tried the A/V inputs (as opposed to the tuner)?
That might help us identify whether it's an issue with the xc3028
tuner chip extracting the audio carrier or whether it's something about the way we are programming the emp202.
Hello,
That was a great idea. Tested with a Playstation2 and audio is ok. It's just TV input that has a problem. So I guess that means the issue is with the tuner chip. That's progress. Where do I go from here?
Regards,
Uroš
Quoted 20 lines · Uros Vampl
Quoted 9 lines · Devin Heitmueller
Quoted 9 lines
Quoted 5 lines
If the audio is present but very quiet, then it's probably some issue you are having with your mixer. I would check your ALSA and PulseAudio configuration (in particular the mixer volume controls).
Devin
No PulseAudio here. And I've played plenty with the ALSA mixer, all the sliders that are there.
Quoted 8 lines
Quoted 3 lines
Using em28xx-new instead of v4l-dvb, all else being equal, tv volume is fine. So there's gotta be a difference somewhere in the way em28xx-new sets up audio compared to how v4l-dvb does it.
Interesting. Have you tried the A/V inputs (as opposed to the tuner)? That might help us identify whether it's an issue with the xc3028 tuner chip extracting the audio carrier or whether it's something about the way we are programming the emp202.
Quoted 5 lines
Hello,
That was a great idea. Tested with a Playstation2 and audio is ok. It's just TV input that has a problem. So I guess that means the issue is with the tuner chip. That's progress. Where do I go from here?
Ok, that's good to hear. What video standard specifically are you using? I suspect the core issue is that the application is not properly specifying the video standard, which results in the xc3028 improperly decoding the audio (the xc3028 needs to know exactly what standard is being used).
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 12 lines · Devin Heitmueller
Quoted 11 lines
Quoted 4 lines
Interesting. Have you tried the A/V inputs (as opposed to the tuner)? That might help us identify whether it's an issue with the xc3028 tuner chip extracting the audio carrier or whether it's something about the way we are programming the emp202.
Hello,
That was a great idea. Tested with a Playstation2 and audio is ok. It's just TV input that has a problem. So I guess that means the issue is with the tuner chip. That's progress. Where do I go from here?
Quoted 5 lines
Ok, that's good to hear. What video standard specifically are you using? I suspect the core issue is that the application is not properly specifying the video standard, which results in the xc3028 improperly decoding the audio (the xc3028 needs to know exactly what standard is being used).
I'm from Slovenia, which is a PAL-B country. Tvtime can be set to either PAL-BG, PAL-DK or PAL-I, makes no difference. MPlayer has a whole bunch of options (PAL, PAL-BG, etc...), but again none of them make a difference.
When the app is started, this appears in dmesg:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. (0), id 00000000000000ff:
xc2028 4-0061: Loading firmware for type=(0), id 0000000100000007.
xc2028 4-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
Quoted 24 lines · Uros Vampl
Quoted 12 lines · Devin Heitmueller
Quoted 11 lines
Quoted 4 lines
Interesting. Have you tried the A/V inputs (as opposed to the tuner)? That might help us identify whether it's an issue with the xc3028 tuner chip extracting the audio carrier or whether it's something about the way we are programming the emp202.
Hello,
That was a great idea. Tested with a Playstation2 and audio is ok. It's just TV input that has a problem. So I guess that means the issue is with the tuner chip. That's progress. Where do I go from here?
Quoted 5 lines
Ok, that's good to hear. What video standard specifically are you using? I suspect the core issue is that the application is not properly specifying the video standard, which results in the xc3028 improperly decoding the audio (the xc3028 needs to know exactly what standard is being used).
I'm from Slovenia, which is a PAL-B country. Tvtime can be set to either PAL-BG, PAL-DK or PAL-I, makes no difference. MPlayer has a whole bunch of options (PAL, PAL-BG, etc...), but again none of them make a difference.
Quoted 6 lines
When the app is started, this appears in dmesg:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. (0), id
00000000000000ff:
xc2028 4-0061: Loading firmware for type=(0), id 0000000100000007.
xc2028 4-0061: Loading SCODE for type=MONO SCODEHAS_IF_5320(60008000), id0000000f00000007.
Alright, success!!!
Since it seems everything for this tuner is set up the same as for the Hauppauge WinTV HVR 900, I figured let's set things up *exactly* the same. So, like it's there for the Hauppauge, I added .mts_firmware = 1 to the definition of the hybrid XS em2882. And well, working TV audio!!
dmesg output this time:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. MTS (4), id 00000000000000ff:
xc2028 4-0061: Loading firmware for type=MTS (4), id 0000000100000007.
So now with the attached patch, everything (analog, digital, remote) works!
Regards,
Uroš
linux/drivers/media/video/em28xx/em28xx-cards.c +4 -2
@@ -1441,11 +1441,12 @@ .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, + .mts_firmware = 1, .decoder = EM28XX_TVP5150, -#if 0 /* FIXME: add an entry at em28xx-dvb */ .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, -#endif + .ir_codes = &ir_codes_terratec_cinergy_xs_table, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0,
@@ -2119,6 +2120,7 @@switch (dev->model) {case EM2880_BOARD_EMPIRE_DUAL_TV :case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 : +case EM2882_BOARD_TERRATEC_HYBRID_XS : ctl->demod =XC3028_FE_ZARLINK456 ;break ;case EM2880_BOARD_TERRATEC_HYBRID_XS :
linux/drivers/media/video/em28xx/em28xx-dvb.c +1 -0
@@ -494,6 +494,7 @@ }break ;case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 : +case EM2882_BOARD_TERRATEC_HYBRID_XS :case EM2880_BOARD_EMPIRE_DUAL_TV : dvb->frontend = dvb_attach(zl10353_attach, &em28xx_zl10353_xc3028_no_i2c_gate,
Quoted 48 lines · Uros Vampl
Quoted 24 lines · Uros Vampl
Quoted 12 lines · Devin Heitmueller
Quoted 11 lines
Quoted 4 lines
Interesting. Have you tried the A/V inputs (as opposed to the tuner)? That might help us identify whether it's an issue with the xc3028 tuner chip extracting the audio carrier or whether it's something about the way we are programming the emp202.
Hello,
That was a great idea. Tested with a Playstation2 and audio is ok. It's just TV input that has a problem. So I guess that means the issue is with the tuner chip. That's progress. Where do I go from here?
Quoted 5 lines
Ok, that's good to hear. What video standard specifically are you using? I suspect the core issue is that the application is not properly specifying the video standard, which results in the xc3028 improperly decoding the audio (the xc3028 needs to know exactly what standard is being used).
I'm from Slovenia, which is a PAL-B country. Tvtime can be set to either PAL-BG, PAL-DK or PAL-I, makes no difference. MPlayer has a whole bunch of options (PAL, PAL-BG, etc...), but again none of them make a difference.
Quoted 6 lines
When the app is started, this appears in dmesg:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. (0), id
00000000000000ff:
xc2028 4-0061: Loading firmware for type=(0), id 0000000100000007.
xc2028 4-0061: Loading SCODE for type=MONO SCODEHAS_IF_5320(60008000), id0000000f00000007.Alright, success!!!
Since it seems everything for this tuner is set up the same as for the Hauppauge WinTV HVR 900, I figured let's set things up *exactly* the same. So, like it's there for the Hauppauge, I added .mts_firmware = 1 to the definition of the hybrid XS em2882. And well, working TV audio!!
dmesg output this time:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. MTS (4), id
00000000000000ff:
xc2028 4-0061: Loading firmware for type=MTS (4), id 0000000100000007.
Quoted 6 lines
So now with the attached patch, everything (analog, digital, remote) works!
Regards,
Uroš
Excellent! I will check your patch into my current hg tree
(http://kernellabs.com/hg/~dheitmueller/misc-fixes2/), which I planned on submitting a PULL for on Monday.
Cheers,
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 15 lines · Uros Vampl
Alright, success!!!
Since it seems everything for this tuner is set up the same as for the Hauppauge WinTV HVR 900, I figured let's set things up *exactly* the same. So, like it's there for the Hauppauge, I added .mts_firmware = 1 to the definition of the hybrid XS em2882. And well, working TV audio!!
dmesg output this time:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. MTS (4), id
00000000000000ff:
xc2028 4-0061: Loading firmware for type=MTS (4), id 0000000100000007.
Quoted 6 lines
So now with the attached patch, everything (analog, digital, remote) works!
Regards,
Uroš
Hello Uros,
Please test out the following tree, which has all the relevant fixes (enabling dvb, your audio fix, proper gpio setting, etc).
http://kernellabs.com/hg/~dheitmueller/misc-fixes2/
If you have any trouble, please let me know. Otherwise I would like to issue a PULL request for this tree.
Thanks,
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 25 lines · Devin Heitmueller
Quoted 15 lines · Uros Vampl
Alright, success!!!
Since it seems everything for this tuner is set up the same as for the Hauppauge WinTV HVR 900, I figured let's set things up *exactly* the same. So, like it's there for the Hauppauge, I added .mts_firmware = 1 to the definition of the hybrid XS em2882. And well, working TV audio!!
dmesg output this time:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. MTS (4), id
00000000000000ff:
xc2028 4-0061: Loading firmware for type=MTS (4), id 0000000100000007.Quoted 6 lines
So now with the attached patch, everything (analog, digital, remote) works!
Regards,
UrošHello Uros,
Quoted 7 lines
Please test out the following tree, which has all the relevant fixes (enabling dvb, your audio fix, proper gpio setting, etc).
http://kernellabs.com/hg/~dheitmueller/misc-fixes2/
If you have any trouble, please let me know. Otherwise I would like to issue a PULL request for this tree.
Hi,
Your tree does not work, no audio. I quickly found the problem though:
gpio is set to default_analog, but it needs to be set to hauppauge_wintv_hvr_900_analog. So I guess treating the EM2880 and EM2882 as the same will not work, because they require different gpio settings.
Regards,
Uroš
Quoted 37 lines · Uros Vampl
Quoted 25 lines · Devin Heitmueller
Quoted 15 lines · Uros Vampl
Alright, success!!!
Since it seems everything for this tuner is set up the same as for the Hauppauge WinTV HVR 900, I figured let's set things up *exactly* the same. So, like it's there for the Hauppauge, I added .mts_firmware = 1 to the definition of the hybrid XS em2882. And well, working TV audio!!
dmesg output this time:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. MTS (4), id
00000000000000ff:
xc2028 4-0061: Loading firmware for type=MTS (4), id 0000000100000007.Quoted 6 lines
So now with the attached patch, everything (analog, digital, remote) works!
Regards,
UrošHello Uros,
Quoted 7 lines
Please test out the following tree, which has all the relevant fixes (enabling dvb, your audio fix, proper gpio setting, etc).
http://kernellabs.com/hg/~dheitmueller/misc-fixes2/
If you have any trouble, please let me know. Otherwise I would like to issue a PULL request for this tree.
Hi,
Quoted 8 lines
Your tree does not work, no audio. I quickly found the problem though:
gpio is set todefault_analog, but it needs to be set tohauppauge_wintv_hvr_900_analog. So I guess treating the EM2880 and EM2882 as the same will not work, because they require different gpio settings.Regards,
Uroš
Hmm.. Interesting. That does make me wonder whether the GPIOs are setup for audio properly on the em2880 version of the profile, or whether the user in question just never tested it. I'll have to go back and check the USB trace.
Nonetheless, I'll just check in your version of the patch, and scrap my version entirely for now. Could you please add your SOB to the patch?
Thanks,
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 52 lines · Devin Heitmueller
Quoted 37 lines · Uros Vampl
Quoted 25 lines · Devin Heitmueller
Quoted 15 lines · Uros Vampl
Alright, success!!!
Since it seems everything for this tuner is set up the same as for the Hauppauge WinTV HVR 900, I figured let's set things up *exactly* the same. So, like it's there for the Hauppauge, I added .mts_firmware = 1 to the definition of the hybrid XS em2882. And well, working TV audio!!
dmesg output this time:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. MTS (4), id
00000000000000ff:
xc2028 4-0061: Loading firmware for type=MTS (4), id 0000000100000007.Quoted 6 lines
So now with the attached patch, everything (analog, digital, remote) works!
Regards,
UrošHello Uros,
Quoted 7 lines
Please test out the following tree, which has all the relevant fixes (enabling dvb, your audio fix, proper gpio setting, etc).
http://kernellabs.com/hg/~dheitmueller/misc-fixes2/
If you have any trouble, please let me know. Otherwise I would like to issue a PULL request for this tree.
Hi,
Quoted 8 lines
Your tree does not work, no audio. I quickly found the problem though:
gpio is set todefault_analog, but it needs to be set tohauppauge_wintv_hvr_900_analog. So I guess treating the EM2880 and EM2882 as the same will not work, because they require different gpio settings.Regards,
UrošHmm.. Interesting. That does make me wonder whether the GPIOs are setup for audio properly on the em2880 version of the profile, or whether the user in question just never tested it. I'll have to go back and check the USB trace.
Quoted 7 lines
Nonetheless, I'll just check in your version of the patch, and scrap my version entirely for now. Could you please add your SOB to the patch?
Thanks,
Devin
Ok, here we go...
Make analog audio, dvb and the remote work on a Terratec Cinergy Hybrid XS (em2882).
linux/drivers/media/video/em28xx/em28xx-cards.c +4 -2
@@ -1441,11 +1441,12 @@ .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, + .mts_firmware = 1, .decoder = EM28XX_TVP5150, -#if 0 /* FIXME: add an entry at em28xx-dvb */ .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, -#endif + .ir_codes = &ir_codes_terratec_cinergy_xs_table, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0,
@@ -2119,6 +2120,7 @@switch (dev->model) {case EM2880_BOARD_EMPIRE_DUAL_TV :case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 : +case EM2882_BOARD_TERRATEC_HYBRID_XS : ctl->demod =XC3028_FE_ZARLINK456 ;break ;case EM2880_BOARD_TERRATEC_HYBRID_XS :
linux/drivers/media/video/em28xx/em28xx-dvb.c +1 -0
@@ -494,6 +494,7 @@ }break ;case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 : +case EM2882_BOARD_TERRATEC_HYBRID_XS :case EM2880_BOARD_EMPIRE_DUAL_TV : dvb->frontend = dvb_attach(zl10353_attach, &em28xx_zl10353_xc3028_no_i2c_gate,