Skip to contentSkip to conversation

Gigabyte U8000-RH USB stick oops kernel

DISCUSSION MarSarK 2 participants 4 messages Sep 21, 2009 Media (V4L/DVB)

lore
Share & tools
lore

MarSarK

author
#0 lore raw

hi, my brand new Gigabyte U8000-RG USB tv oops kernel.

I have tried kernels from 2.6.27 to 2.6.31 everytime with same result (also at my notebook).

uname -a:
Linux vertigo 2.6.31-gentoo #2 SMP PREEMPT Mon Sep 14 20:20:59 CEST 2009 i686 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU/Linux

lsusb:
Bus 001 Device 005: ID 1044:7002 Chu Yuen Enterprise Co., Ltd

This output is from 2.6.31 kernel and last mercurial snapshot of linuxtv tree. Error occure when I try to scan channels in Kaffeine.

dmesg:
usb 1-4: configuration #1 chosen from 1 choice
dib0700: loaded with support for 13 different device-types
dvb-usb: found a 'Gigabyte U8000-RH' in cold state, will try to load a firmware usb 1-4: firmware: requesting dvb-usb-dib0700-1.20.fw
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Gigabyte U8000-RH' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Gigabyte U8000-RH)
DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
xc2028 4-0061: creating new instance
xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/input/input4
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Gigabyte U8000-RH successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700

BUG: unable to handle kernel NULL pointer dereference at 00000008                                                                                             
IP: [<c11f99f3>] _request_firmware+0x3e3/0x440                                                                                                                
*pde = 00000000                                                                                                                                               
Oops: 0000 [#1] PREEMPT SMP                                                                                                                                   
last sysfs file: /sys/devices/pci0000:00/0000:00:1a.7/usb1/1-4/idProduct                                                                                      
Modules linked in: tuner_xc2028 dvb_usb_dib0700 dib7000p dib7000m dib0070 

dvb_usb dib3000mc dib8000 dibx000_common dvb_core nvidia(P) asus_atk0110 coretemp sco rfcomm l2cap fuse usb_storage vboxnetadp vboxnetflt vboxdrv

Pid: 9533, comm: kdvb-ad-0-fe-0 Tainted: P (2.6.31-gentoo #2) P5Q
DELUXE
EIP: 0060:[<c11f99f3>] EFLAGS: 00010202 CPU: 0
EIP is at _request_firmware+0x3e3/0x440
EAX: 00000000 EBX: f62f5300 ECX: 00000000 EDX: f4933e54
ESI: c1438ab0 EDI: f4999720 EBP: f62f5300 ESP: f4933d34
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process kdvb-ad-0-fe-0 (pid: 9533, ti=f4932000 task=f4aa6cb0 task.ti=f4932000)

Stack:                                                                            
 f4933d88 00000000 00000000 e8024090 00000000 f4933e54 e8024098 f62f5300          
<0> f67f3000 00000000 f62f5300 c11f9adf 00000001 f89d3107 c12550b0 00069400       
<0> 00000000 00000000 00000003 80000400 f4949400 00000006 00000006 00000006       
Call Trace:                                                                       
 [<c11f9adf>] ? request_firmware+0xf/0x20                                         
 [<f89d3107>] ? generic_set_freq+0xc87/0x1c70 [tuner_xc2028]                      
 [<c12550b0>] ? usb_control_msg+0xe0/0x100                                        
 [<f8880807>] ? dib0700_i2c_xfer+0x157/0x4d0 [dvb_usb_dib0700]                    
 [<c127922b>] ? i2c_transfer+0xab/0xd0                                            
 [<c127922b>] ? i2c_transfer+0xab/0xd0                                            
 [<f8867068>] ? dib7000p_write_word+0x58/0x70 [dib7000p]                          
 [<f89d4456>] ? xc2028_set_params+0x146/0x260 [tuner_xc2028]                      
 [<f88684a6>] ? dib7000p_set_frontend+0x56/0xfb0 [dib7000p]
 [<c10269f7>] ? finish_task_switch+0xa7/0xf0
 [<c1367f57>] ? schedule+0x317/0x8f0
 [<c1035537>] ? lock_timer_base+0x27/0x60
 [<f8842c41>] ? dvb_frontend_swzigzag_autotune+0xc1/0x270 [dvb_core]
 [<c1035831>] ? del_timer_sync+0x11/0x20
 [<c13687b6>] ? schedule_timeout+0xe6/0x150
 [<c10280ad>] ? try_to_wake_up+0x8d/0x1a0
 [<f8843719>] ? dvb_frontend_swzigzag+0x189/0x2a0 [dvb_core]
 [<f8843fb7>] ? dvb_frontend_thread+0x3b7/0x650 [dvb_core]
 [<c103fbb0>] ? autoremove_wake_function+0x0/0x50
 [<f8843c00>] ? dvb_frontend_thread+0x0/0x650 [dvb_core]
 [<c103f8c4>] ? kthread+0x84/0x90
 [<c103f840>] ? kthread+0x0/0x90
 [<c10039df>] ? kernel_thread_helper+0x7/0x18
Code: d0 e8 02 7a ff ff 89 5c 24 08 c7 44 24 0c a0 c4 38 c1 89 44 24 04 c7 04 24 

52 e6 40 c1 e8 7f df 16 00 e9 2e ff ff ff 8b 44 24 10 <8b> 58 08 e8 d5 79 ff ff 89 7c 24 0c 89 5c 24 08 89 44 24 04 c7
EIP: [<c11f99f3>] _request_firmware+0x3e3/0x440 SS:ESP 0068:f4933d34
CR2: 0000000000000008

---[ end trace 3f52e895d964749e ]---

Martin

-------------------------------------------------------

#1 lore raw
Quoted 80 lines · MarSarK

hi, my brand new Gigabyte U8000-RG USB tv oops kernel.

I have tried kernels from 2.6.27 to 2.6.31 everytime with same result (also at my notebook).

uname -a:
Linux vertigo 2.6.31-gentoo #2 SMP PREEMPT Mon Sep 14 20:20:59 CEST 2009 i686 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU/Linux

lsusb:
Bus 001 Device 005: ID 1044:7002 Chu Yuen Enterprise Co., Ltd

This output is from 2.6.31 kernel and last mercurial snapshot of linuxtv tree. Error occure when I try to scan channels in Kaffeine.

dmesg:
usb 1-4: configuration #1 chosen from 1 choice
dib0700: loaded with support for 13 different device-types
dvb-usb: found a 'Gigabyte U8000-RH' in cold state, will try to load a firmware usb 1-4: firmware: requesting dvb-usb-dib0700-1.20.fw
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Gigabyte U8000-RH' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Gigabyte U8000-RH)
DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
xc2028 4-0061: creating new instance
xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/input/input4
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Gigabyte U8000-RH successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700

BUG: unable to handle kernel NULL pointer dereference at 00000008
IP: [<c11f99f3>] _request_firmware+0x3e3/0x440
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1a.7/usb1/1-4/idProduct
Modules linked in: tuner_xc2028 dvb_usb_dib0700 dib7000p dib7000m dib0070

dvb_usb dib3000mc dib8000 dibx000_common dvb_core nvidia(P) asus_atk0110 coretemp sco rfcomm l2cap fuse usb_storage vboxnetadp vboxnetflt vboxdrv

Pid: 9533, comm: kdvb-ad-0-fe-0 Tainted: P           (2.6.31-gentoo #2) P5Q DELUXE
EIP: 0060:[<c11f99f3>] EFLAGS: 00010202 CPU: 0
EIP is at _request_firmware+0x3e3/0x440
EAX: 00000000 EBX: f62f5300 ECX: 00000000 EDX: f4933e54
ESI: c1438ab0 EDI: f4999720 EBP: f62f5300 ESP: f4933d34
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process kdvb-ad-0-fe-0 (pid: 9533, ti=f4932000 task=f4aa6cb0 task.ti=f4932000)

Stack:
 f4933d88 00000000 00000000 e8024090 00000000 f4933e54 e8024098 f62f5300
<0> f67f3000 00000000 f62f5300 c11f9adf 00000001 f89d3107 c12550b0 00069400
<0> 00000000 00000000 00000003 80000400 f4949400 00000006 00000006 00000006
Call Trace:
 [<c11f9adf>] ? request_firmware+0xf/0x20
 [<f89d3107>] ? generic_set_freq+0xc87/0x1c70 [tuner_xc2028]
 [<c12550b0>] ? usb_control_msg+0xe0/0x100
 [<f8880807>] ? dib0700_i2c_xfer+0x157/0x4d0 [dvb_usb_dib0700]
 [<c127922b>] ? i2c_transfer+0xab/0xd0
 [<c127922b>] ? i2c_transfer+0xab/0xd0
 [<f8867068>] ? dib7000p_write_word+0x58/0x70 [dib7000p]
 [<f89d4456>] ? xc2028_set_params+0x146/0x260 [tuner_xc2028]
 [<f88684a6>] ? dib7000p_set_frontend+0x56/0xfb0 [dib7000p]
 [<c10269f7>] ? finish_task_switch+0xa7/0xf0
 [<c1367f57>] ? schedule+0x317/0x8f0
 [<c1035537>] ? lock_timer_base+0x27/0x60
 [<f8842c41>] ? dvb_frontend_swzigzag_autotune+0xc1/0x270 [dvb_core]
 [<c1035831>] ? del_timer_sync+0x11/0x20
 [<c13687b6>] ? schedule_timeout+0xe6/0x150
 [<c10280ad>] ? try_to_wake_up+0x8d/0x1a0
 [<f8843719>] ? dvb_frontend_swzigzag+0x189/0x2a0 [dvb_core]
 [<f8843fb7>] ? dvb_frontend_thread+0x3b7/0x650 [dvb_core]
 [<c103fbb0>] ? autoremove_wake_function+0x0/0x50
 [<f8843c00>] ? dvb_frontend_thread+0x0/0x650 [dvb_core]
 [<c103f8c4>] ? kthread+0x84/0x90
 [<c103f840>] ? kthread+0x0/0x90
 [<c10039df>] ? kernel_thread_helper+0x7/0x18
Code: d0 e8 02 7a ff ff 89 5c 24 08 c7 44 24 0c a0 c4 38 c1 89 44 24 04 c7 04 24
Quoted 8 lines

52 e6 40 c1 e8 7f df 16 00 e9 2e ff ff ff 8b 44 24 10 <8b> 58 08 e8 d5 79 ff ff 89 7c 24 0c 89 5c 24 08 89 44 24 04 c7
EIP: [<c11f99f3>] _request_firmware+0x3e3/0x440 SS:ESP 0068:f4933d34
CR2: 0000000000000008

---[ end trace 3f52e895d964749e ]---

Martin

Heh, I know what that is. It was a result of a change to the request_firmware() implementation where they actually started dereferencing the first argument (and the i2c slave in the dib7000 isn't setting the pointer). I ran into it when doing the PCTV 340e work

You'll need something comparable to this patch:

http://www.kernellabs.com/hg/~dheitmueller/pctv-340e/rev/ba97460d2b3e

My patch is just a workaround (which is why I had not submitted it upstream) - we really need to fix the bridge driver to do the work properly.

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
author
#2 lore raw

Dne Po 21. září 2009 21:47:04 jste napsal(a): > On Mon, Sep 21, 2009 at 3:34

Quoted 97 lines · MarSarK
Quoted 80 lines

hi, my brand new Gigabyte U8000-RG USB tv oops kernel.

I have tried kernels from 2.6.27 to 2.6.31 everytime with same result (also at my notebook).

uname -a:
Linux vertigo 2.6.31-gentoo #2 SMP PREEMPT Mon Sep 14 20:20:59 CEST 2009 i686 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU/Linux

lsusb:
Bus 001 Device 005: ID 1044:7002 Chu Yuen Enterprise Co., Ltd

This output is from 2.6.31 kernel and last mercurial snapshot of linuxtv tree. Error occure when I try to scan channels in Kaffeine.

dmesg:
usb 1-4: configuration #1 chosen from 1 choice
dib0700: loaded with support for 13 different device-types
dvb-usb: found a 'Gigabyte U8000-RH' in cold state, will try to load a firmware usb 1-4: firmware: requesting dvb-usb-dib0700-1.20.fw
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Gigabyte U8000-RH' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Gigabyte U8000-RH)
DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... xc2028 4-0061: creating new instance
xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/input/input4
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Gigabyte U8000-RH successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700

BUG: unable to handle kernel NULL pointer dereference at 00000008
IP: [<c11f99f3>] _request_firmware+0x3e3/0x440
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1a.7/usb1/1-4/idProduct
Modules linked in: tuner_xc2028 dvb_usb_dib0700 dib7000p dib7000m dib0070

dvb_usb dib3000mc dib8000 dibx000_common dvb_core nvidia(P) asus_atk0110 coretemp sco rfcomm l2cap fuse usb_storage vboxnetadp vboxnetflt vboxdrv

Pid: 9533, comm: kdvb-ad-0-fe-0 Tainted: P (2.6.31-gentoo #2)
P5Q DELUXE
EIP: 0060:[<c11f99f3>] EFLAGS: 00010202 CPU: 0
EIP is at _request_firmware+0x3e3/0x440
EAX: 00000000 EBX: f62f5300 ECX: 00000000 EDX: f4933e54
ESI: c1438ab0 EDI: f4999720 EBP: f62f5300 ESP: f4933d34
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process kdvb-ad-0-fe-0 (pid: 9533, ti=f4932000 task=f4aa6cb0 task.ti=f4932000) Stack:
f4933d88 00000000 00000000 e8024090 00000000 f4933e54 e8024098 f62f5300
<0> f67f3000 00000000 f62f5300 c11f9adf 00000001 f89d3107 c12550b0 00069400 <0> 00000000 00000000 00000003 80000400 f4949400 00000006 00000006 00000006 Call Trace:
[<c11f9adf>] ? request_firmware+0xf/0x20
[<f89d3107>] ? generic_set_freq+0xc87/0x1c70 [tuner_xc2028] [<c12550b0>] ? usb_control_msg+0xe0/0x100
[<f8880807>] ? dib0700_i2c_xfer+0x157/0x4d0 [dvb_usb_dib0700] [<c127922b>] ? i2c_transfer+0xab/0xd0
[<c127922b>] ? i2c_transfer+0xab/0xd0
[<f8867068>] ? dib7000p_write_word+0x58/0x70 [dib7000p] [<f89d4456>] ? xc2028_set_params+0x146/0x260 [tuner_xc2028] [<f88684a6>] ? dib7000p_set_frontend+0x56/0xfb0 [dib7000p] [<c10269f7>] ? finish_task_switch+0xa7/0xf0
[<c1367f57>] ? schedule+0x317/0x8f0
[<c1035537>] ? lock_timer_base+0x27/0x60
[<f8842c41>] ? dvb_frontend_swzigzag_autotune+0xc1/0x270 [dvb_core] [<c1035831>] ? del_timer_sync+0x11/0x20
[<c13687b6>] ? schedule_timeout+0xe6/0x150
[<c10280ad>] ? try_to_wake_up+0x8d/0x1a0
[<f8843719>] ? dvb_frontend_swzigzag+0x189/0x2a0 [dvb_core] [<f8843fb7>] ? dvb_frontend_thread+0x3b7/0x650 [dvb_core] [<c103fbb0>] ? autoremove_wake_function+0x0/0x50 [<f8843c00>] ? dvb_frontend_thread+0x0/0x650 [dvb_core] [<c103f8c4>] ? kthread+0x84/0x90
[<c103f840>] ? kthread+0x0/0x90
[<c10039df>] ? kernel_thread_helper+0x7/0x18

Code: d0 e8 02 7a ff ff 89 5c 24 08 c7 44 24 0c a0 c4 38 c1 89 44 24 04
Quoted 8 lines

c7 04 24 52 e6 40 c1 e8 7f df 16 00 e9 2e ff ff ff 8b 44 24 10 <8b> 58 08 e8 d5 79 ff ff 89 7c 24 0c 89 5c 24 08 89 44 24 04 c7
EIP: [<c11f99f3>] _request_firmware+0x3e3/0x440 SS:ESP 0068:f4933d34
CR2: 0000000000000008

---[ end trace 3f52e895d964749e ]---

Martin

Heh, I know what that is. It was a result of a change to the request_firmware() implementation where they actually started dereferencing the first argument (and the i2c slave in the dib7000 isn't setting the pointer). I ran into it when doing the PCTV 340e work

You'll need something comparable to this patch:

Quoted 8 lines

http://www.kernellabs.com/hg/~dheitmueller/pctv-340e/rev/ba97460d2b3e

My patch is just a workaround (which is why I had not submitted it upstream) - we really need to fix the bridge driver to do the work properly.

Devin

Thanks for quick answer. Yes, I added that single line and it works for me. Martin

#3 lore raw
Quoted 105 lines · MarSarK

Dne Po 21. září 2009 21:47:04 jste napsal(a): > On Mon, Sep 21, 2009 at 3:34

Quoted 103 lines · MarSarK
Quoted 80 lines

hi, my brand new Gigabyte U8000-RG USB tv oops kernel.

I have tried kernels from 2.6.27 to 2.6.31 everytime with same result (also at my notebook).

uname -a:
Linux vertigo 2.6.31-gentoo #2 SMP PREEMPT Mon Sep 14 20:20:59 CEST 2009 i686 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU/Linux

lsusb:
Bus 001 Device 005: ID 1044:7002 Chu Yuen Enterprise Co., Ltd

This output is from 2.6.31 kernel and last mercurial snapshot of linuxtv tree. Error occure when I try to scan channels in Kaffeine.

dmesg:
usb 1-4: configuration #1 chosen from 1 choice
dib0700: loaded with support for 13 different device-types
dvb-usb: found a 'Gigabyte U8000-RH' in cold state, will try to load a firmware usb 1-4: firmware: requesting dvb-usb-dib0700-1.20.fw
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Gigabyte U8000-RH' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Gigabyte U8000-RH)
DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... xc2028 4-0061: creating new instance
xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/input/input4
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Gigabyte U8000-RH successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700

BUG: unable to handle kernel NULL pointer dereference at 00000008
IP: [<c11f99f3>] _request_firmware+0x3e3/0x440
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1a.7/usb1/1-4/idProduct
Modules linked in: tuner_xc2028 dvb_usb_dib0700 dib7000p dib7000m dib0070

dvb_usb dib3000mc dib8000 dibx000_common dvb_core nvidia(P) asus_atk0110 coretemp sco rfcomm l2cap fuse usb_storage vboxnetadp vboxnetflt vboxdrv

Pid: 9533, comm: kdvb-ad-0-fe-0 Tainted: P           (2.6.31-gentoo #2) P5Q DELUXE
EIP: 0060:[<c11f99f3>] EFLAGS: 00010202 CPU: 0
EIP is at _request_firmware+0x3e3/0x440
EAX: 00000000 EBX: f62f5300 ECX: 00000000 EDX: f4933e54
ESI: c1438ab0 EDI: f4999720 EBP: f62f5300 ESP: f4933d34
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process kdvb-ad-0-fe-0 (pid: 9533, ti=f4932000 task=f4aa6cb0 task.ti=f4932000) Stack:
 f4933d88 00000000 00000000 e8024090 00000000 f4933e54 e8024098 f62f5300 <0> f67f3000 00000000 f62f5300 c11f9adf 00000001 f89d3107 c12550b0 00069400 <0> 00000000 00000000 00000003 80000400 f4949400 00000006 00000006 00000006 Call Trace:
 [<c11f9adf>] ? request_firmware+0xf/0x20
 [<f89d3107>] ? generic_set_freq+0xc87/0x1c70 [tuner_xc2028] [<c12550b0>] ? usb_control_msg+0xe0/0x100
 [<f8880807>] ? dib0700_i2c_xfer+0x157/0x4d0 [dvb_usb_dib0700] [<c127922b>] ? i2c_transfer+0xab/0xd0
 [<c127922b>] ? i2c_transfer+0xab/0xd0
 [<f8867068>] ? dib7000p_write_word+0x58/0x70 [dib7000p] [<f89d4456>] ? xc2028_set_params+0x146/0x260 [tuner_xc2028] [<f88684a6>] ? dib7000p_set_frontend+0x56/0xfb0 [dib7000p] [<c10269f7>] ? finish_task_switch+0xa7/0xf0
 [<c1367f57>] ? schedule+0x317/0x8f0
 [<c1035537>] ? lock_timer_base+0x27/0x60
 [<f8842c41>] ? dvb_frontend_swzigzag_autotune+0xc1/0x270 [dvb_core] [<c1035831>] ? del_timer_sync+0x11/0x20
 [<c13687b6>] ? schedule_timeout+0xe6/0x150
 [<c10280ad>] ? try_to_wake_up+0x8d/0x1a0
 [<f8843719>] ? dvb_frontend_swzigzag+0x189/0x2a0 [dvb_core] [<f8843fb7>] ? dvb_frontend_thread+0x3b7/0x650 [dvb_core] [<c103fbb0>] ? autoremove_wake_function+0x0/0x50 [<f8843c00>] ? dvb_frontend_thread+0x0/0x650 [dvb_core] [<c103f8c4>] ? kthread+0x84/0x90
 [<c103f840>] ? kthread+0x0/0x90
 [<c10039df>] ? kernel_thread_helper+0x7/0x18

Code: d0 e8 02 7a ff ff 89 5c 24 08 c7 44 24 0c a0 c4 38 c1 89 44 24 04
Quoted 8 lines

c7 04 24 52 e6 40 c1 e8 7f df 16 00 e9 2e ff ff ff 8b 44 24 10 <8b> 58 08 e8 d5 79 ff ff 89 7c 24 0c 89 5c 24 08 89 44 24 04 c7
EIP: [<c11f99f3>] _request_firmware+0x3e3/0x440 SS:ESP 0068:f4933d34
CR2: 0000000000000008

---[ end trace 3f52e895d964749e ]---

Martin

Heh, I know what that is.  It was a result of a change to the request_firmware() implementation where they actually started dereferencing the first argument (and the i2c slave in the dib7000 isn't setting the pointer).  I ran into it when doing the PCTV 340e work

You'll need something comparable to this patch:

http://www.kernellabs.com/hg/~dheitmueller/pctv-340e/rev/ba97460d2b3e

My patch is just a workaround (which is why I had not submitted it upstream) - we really need to fix the bridge driver to do the work properly.

Quoted 6 lines
Quoted 2 lines

Devin

Thanks for quick answer. Yes, I added that single line and it works for me. Martin

Martin,

If you want to send me the patch with your SOB, I will push a patch upstream that at least fixes the regression. The "right" fix can come later.

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com