Linux 2.6.31.1
Subsystems (27)
I'm announcing the release of the 2.6.31.1 kernel. All users of the 2.6.31 kernel series are very strongly encouraged to upgrade.
I'll also be replying to this message with a copy of the patch between 2.6.31 and 2.6.31.1
The updated 2.6.31.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.31.y.git
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.31.y.git;a=summarythanks,
greg k-h
------------
Makefile | 2 arch/arm/mm/highmem.c | 8 + arch/powerpc/include/asm/mmu-hash64.h | 2 arch/powerpc/include/asm/pmc.h | 16 ++ arch/powerpc/kernel/lparcfg.c | 3 arch/powerpc/kernel/perf_counter.c | 68 +++++---- arch/powerpc/kernel/rtas.c | 7 - arch/powerpc/kernel/sysfs.c | 3 arch/powerpc/mm/slb.c | 16 +- arch/powerpc/platforms/pseries/reconfig.c | 9 + arch/powerpc/platforms/pseries/setup.c | 4 arch/x86/include/asm/kvm_host.h | 1 arch/x86/include/asm/processor.h | 12 + arch/x86/include/asm/stackprotector.h | 4 arch/x86/include/asm/system.h | 2 arch/x86/kernel/amd_iommu.c | 2 arch/x86/kernel/apic/es7000_32.c | 2 arch/x86/kernel/cpu/common.c | 2 arch/x86/kernel/head_32.S | 1 arch/x86/kernel/kvm.c | 7 - arch/x86/kernel/kvmclock.c | 4 arch/x86/kvm/lapic.c | 9 + arch/x86/kvm/mmu.c | 3 arch/x86/kvm/vmx.c | 11 - arch/x86/kvm/x86.c | 19 ++ arch/x86/kvm/x86_emulate.c | 17 ++ arch/x86/mm/pageattr.c | 8 + block/blk-sysfs.c | 7 - drivers/ata/libata-core.c | 8 + drivers/char/agp/intel-agp.c | 9 - drivers/char/tpm/tpm_tis.c | 12 - drivers/md/dm-log-userspace-base.c | 2 drivers/net/mlx4/eq.c | 42 ------ drivers/net/mlx4/main.c | 9 - drivers/net/mlx4/mlx4.h | 7 - drivers/net/wireless/ath/ath5k/base.c | 2 drivers/pci/quirks.c | 4 drivers/ps3/ps3stor_lib.c | 65 ++++++++- drivers/scsi/libsrp.c | 1 drivers/scsi/mpt2sas/mpt2sas_base.c | 23 +-- drivers/scsi/mpt2sas/mpt2sas_base.h | 43 +++++- drivers/scsi/mpt2sas/mpt2sas_config.c | 61 ++++++++ drivers/scsi/mpt2sas/mpt2sas_ctl.c | 16 -- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 207 +++++++++++++----------------- drivers/scsi/mpt2sas/mpt2sas_transport.c | 29 ++-- drivers/scsi/sd.c | 2 drivers/scsi/sg.c | 2 fs/binfmt_elf.c | 28 ++-- include/linux/kvm_para.h | 1 ipc/shm.c | 2 kernel/perf_counter.c | 44 ++++-- net/wireless/scan.c | 2 sound/pci/cs46xx/cs46xx_lib.h | 2 sound/pci/oxygen/oxygen_io.c | 11 - sound/soc/codecs/wm8350.c | 2 tools/perf/builtin-stat.c | 170 ++++++++++-------------- virt/kvm/ioapic.c | 2 57 files changed, 616 insertions(+), 441 deletions(-)
Alexander Duyck (1):
PCI quirk: update 82576 device ids in SR-IOV quirks list
Avi Kivity (3):
KVM: VMX: Check cpl before emulating debug register access
KVM: x86 emulator: Implement zero-extended immediate decoding
KVM: x86 emulator: fix jmp far decoding (opcode 0xea)
Bart Van Assche (1):
SCSI: libsrp: fix memory leak in srp_ring_free()
Bob Copeland (2):
cfg80211: fix looping soft lockup in find_ie()
ath5k: write PCU registers on initial reset
Brian King (1):
powerpc/pseries: Fix to handle slb resize across migration
Clemens Ladisch (1):
sound: oxygen: work around MCE when changing volume
Geert Uytterhoeven (1):
md: Fix "strchr" [drivers/md/dm-log-userspace.ko] undefined!
Geoff Levand (1):
powerpc/ps3: Workaround for flash memory I/O error
Glauber Costa (1):
KVM guest: fix bogus wallclock physical address calculation
Gleb Natapov (2):
KVM: Fix coalesced interrupt reporting in IOAPIC
KVM: VMX: Fix cr8 exiting control clobbering by EPT
Greg Kroah-Hartman (1):
Linux 2.6.31.1
Hugh Dickins (1):
fix undefined reference to user_shm_unlock
Izik Eidus (1):
KVM: MMU: make __kvm_mmu_free_some_pages handle empty list
Jack Steiner (1):
x86, pat: Fix cacheflush address in change_page_attr_set_clr()
James Bottomley (1):
SCSI: fix oops during scsi scanning
Jan Kiszka (1):
KVM: x86: Disallow hypercalls for guest callers in rings > 0
Jason Gunthorpe (1):
TPM: Fixup boot probe timeout for tpm_tis driver
Jean Delvare (1):
PCI: Unhide the SMBus on the Compaq Evo D510 USDT
Jens Axboe (1):
block: don't assume device has a request list backing in nr_requests store
Jeremy Fitzhardinge (1):
x86/i386: Make sure stack-protector segment base is cache aligned
Joerg Roedel (1):
x86/amd-iommu: fix broken check in amd_iommu_flush_all_devices
Kashyap, Desai (4):
mpt2sas : Rescan topology from Interrupt context instead of work thread
mpt2sas: Prevent sending command to FW while Host Reset
mpt2sas: setting SDEV into RUNNING state from Interrupt context
mpt2sas: Raid 10 Volume is showing as Raid 1E in dmesg
Marcelo Tosatti (2):
KVM guest: do not batch pte updates from interrupt context
KVM: limit lapic periodic timer frequency
Mark Brown (1):
ASoC: Fix WM835x Out4 capture enumeration
Michal Schmidt (1):
sg: fix oops in the error path in sg_build_indirect()
Nicolas Pitre (1):
ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with highmem
Paul Mackerras (3):
perf_counter: Start counting time enabled when group leader gets enabled powerpc/perf_counters: Reduce stack usage of power_check_constraints
powerpc: Fix bug where perf_counters breaks oprofile
Peter Zijlstra (1):
perf stat: Change noise calculation to use stddev
Roel Kluin (1):
x86: Fix x86_model test in es7000_apic_is_cluster()
Roland Dreier (1):
mlx4_core: Allocate and map sufficient ICM memory for EQ context
Roland McGrath (1):
binfmt_elf: fix PT_INTERP bss handling
Sophie Hamilton (1):
ALSA: cs46xx - Fix minimum period size
Tejun Heo (2):
PCI: apply nv_msi_ht_cap_quirk on resume too
libata: fix off-by-one error in ata_tf_read_block()
Xiao Guangrong (1):
perf_counter: Fix buffer overflow in perf_copy_attr()
Zhenyu Wang (1):
agp/intel: remove restore in resume
Makefile +1 -1
@@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 31 -EXTRAVERSION = +EXTRAVERSION = .1 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION*
arch/arm/mm/highmem.c +8 -0
@@ -40,11 +40,16 @@ void *kmap_atomic(struct page *page, enum km_type type) {unsigned int idx;unsigned long vaddr; +void *kmap;pagefault_disable ();if (!PageHighMem (page))return page_address (page); + kmap =kmap_high_get (page); +if (kmap) +return kmap; + idx = type +KM_TYPE_NR *smp_processor_id (); vaddr =__fix_to_virt (FIX_KMAP_BEGIN + idx);#ifdef CONFIG_DEBUG_HIGHMEM
@@ -80,6 +85,9 @@ void kunmap_atomic(void *kvaddr, enum km_type type)#else (void ) idx;/* to kill a warning */ #endif + }else if (vaddr >=PKMAP_ADDR (0 ) && vaddr <PKMAP_ADDR (LAST_PKMAP )) { +/* this address was obtained through kmap_high_get() */ +kunmap_high (pte_page (pkmap_page_table[PKMAP_NR (vaddr)])); }pagefault_enable (); }
arch/powerpc/include/asm/mmu-hash64.h +2 -0
@@ -41,6 +41,7 @@ extern char initial_stab[];#define SLB_NUM_BOLTED 3#define SLB_CACHE_ENTRIES 8 +#define SLB_MIN_SIZE 32/* Bits in the SLB ESID word */ #define SLB_ESID_V ASM_CONST(0x0000000008000000)/* valid */
@@ -296,6 +297,7 @@ extern void slb_flush_and_rebolt(void);extern void stab_initialize (unsigned long stab);extern void slb_vmalloc_update (void ); +extern void slb_set_size (u16 size);#endif /* __ASSEMBLY__ */ /*
arch/powerpc/include/asm/pmc.h +14 -2
@@ -27,10 +27,22 @@ extern perf_irq_t perf_irq;int reserve_pmc_hardware (perf_irq_t new_perf_irq);void release_pmc_hardware (void ); +void ppc_enable_pmcs (void );#ifdef CONFIG_PPC64 -void power4_enable_pmcs (void ); -void pasemi_enable_pmcs (void ); +#include <asm/lppaca.h> + +static inline void ppc_set_pmu_inuse (int inuse) +{ +get_lppaca ()->pmcregs_in_use = inuse; +} + +extern void power4_enable_pmcs (void ); + +#else /* CONFIG_PPC64 */ + +static inline void ppc_set_pmu_inuse (int inuse) { } +#endif #endif /* __KERNEL__ */
arch/powerpc/kernel/lparcfg.c +3 -0
@@ -35,6 +35,7 @@#include <asm/prom.h> #include <asm/vdso_datapage.h> #include <asm/vio.h> +#include <asm/mmu.h> #define MODULE_VERS "1.8"#define MODULE_NAME "lparcfg"
@@ -537,6 +538,8 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)seq_printf (m,"shared_processor_mode=%d\n" , lppaca[0 ].shared_proc); +seq_printf (m,"slb_size=%d\n" , mmu_slb_size); +return 0 ; }
arch/powerpc/kernel/perf_counter.c +35 -33
177 lines not on this page · raw message
arch/powerpc/kernel/rtas.c +6 -1
@@ -39,6 +39,7 @@#include <asm/smp.h> #include <asm/atomic.h> #include <asm/time.h> +#include <asm/mmu.h> struct rtas_t rtas = { .lock = __RAW_SPIN_LOCK_UNLOCKED
@@ -713,6 +714,7 @@ static void rtas_percpu_suspend_me(void *info) {long rc =H_SUCCESS ;unsigned long msr_save; +u16 slb_size = mmu_slb_size;int cpu;struct rtas_suspend_me_data *data = (struct rtas_suspend_me_data *)info;
@@ -735,13 +737,16 @@ static void rtas_percpu_suspend_me(void *info)/* All other cpus are in H_JOIN, this cpu does * the suspend. */ +slb_set_size (SLB_MIN_SIZE );printk (KERN_DEBUG "calling ibm,suspend-me on cpu %i\n" ,smp_processor_id ()); data->error =rtas_call (data->token,0 ,1 ,NULL ); -if (data->error) +if (data->error) {printk (KERN_DEBUG "ibm,suspend-me returned %d\n" , data->error); +slb_set_size (slb_size); + } }else {printk (KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n" ,smp_processor_id (), rc);
arch/powerpc/kernel/sysfs.c +3 -0
@@ -17,6 +17,7 @@#include <asm/prom.h> #include <asm/machdep.h> #include <asm/smp.h> +#include <asm/pmc.h> #include "cacheinfo.h"
@@ -123,6 +124,8 @@ static DEFINE_PER_CPU(char, pmcs_enabled);void ppc_enable_pmcs (void ) { +ppc_set_pmu_inuse (1 ); +/* Only need to enable them once */ if (__get_cpu_var (pmcs_enabled))return ;
arch/powerpc/mm/slb.c +12 -4
@@ -240,14 +240,22 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)static inline void patch_slb_encoding (unsigned int *insn_addr,unsigned int immed) { -/* Assume the instruction had a "0" immediate value, just -* "or" in the new value -*/ - *insn_addr |= immed; + *insn_addr = (*insn_addr &0xffff0000 ) | immed;flush_icache_range ((unsigned long )insn_addr,4 + (unsigned long )insn_addr); } +void slb_set_size (u16 size) +{ +extern unsigned int *slb_compare_rr_to_size; + +if (mmu_slb_size == size) +return ; + + mmu_slb_size = size; +patch_slb_encoding (slb_compare_rr_to_size, mmu_slb_size); +} +void slb_initialize (void ) {unsigned long linear_llp, vmalloc_llp, io_llp;
arch/powerpc/platforms/pseries/reconfig.c +8 -1
@@ -20,6 +20,7 @@#include <asm/machdep.h> #include <asm/uaccess.h> #include <asm/pSeries_reconfig.h> +#include <asm/mmu.h>
@@ -439,9 +440,15 @@ static int do_update_property(char *buf, size_t bufsize)if (!newprop)return -ENOMEM ; +if (!strcmp (name,"slb-size" ) || !strcmp (name,"ibm,slb-size" )) +slb_set_size (*(int *)value); + oldprop =of_find_property (np, name,NULL ); -if (!oldprop) +if (!oldprop) { +if (strlen (name)) +return prom_add_property (np, newprop);return -ENODEV ; + } rc =prom_update_property (np, newprop, oldprop);if (rc)
arch/powerpc/platforms/pseries/setup.c +0 -4
@@ -223,10 +223,6 @@ static void pseries_lpar_enable_pmcs(void) set =1UL <<63 ; reset =0 ;plpar_hcall_norets (H_PERFMON , set, reset); - -/* instruct hypervisor to maintain PMCs */ -if (firmware_has_feature (FW_FEATURE_SPLPAR )) -get_lppaca ()->pmcregs_in_use =1 ; }static void __init pseries_discover_pic (void )
arch/x86/include/asm/kvm_host.h +1 -0
@@ -618,6 +618,7 @@ void kvm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr);void kvm_queue_exception_e (struct kvm_vcpu *vcpu,unsigned nr,u32 error_code);void kvm_inject_page_fault (struct kvm_vcpu *vcpu,unsigned long cr2,u32 error_code); +bool kvm_require_cpl (struct kvm_vcpu *vcpu,int required_cpl);int kvm_pic_set_irq (void *opaque,int irq,int level);
arch/x86/include/asm/processor.h +11 -1
@@ -403,7 +403,17 @@ extern unsigned long kernel_eflags; extern asmlinkage void ignore_sysret(void);#else /* X86_64 */ #ifdef CONFIG_CC_STACKPROTECTOR -DECLARE_PER_CPU(unsigned long, stack_canary); +/* +* Make sure stack canary segment base is cached-aligned: +* "For Intel Atom processors, avoid non zero segment base address +* that is not aligned to cache line boundary at all cost." +* (Optim Ref Manual Assembly/Compiler Coding Rule 15.) +*/ +struct stack_canary { +char __pad[20 ];/* canary at %gs:20 */ +unsigned long canary; +}; +DECLARE_PER_CPU(struct stack_canary, stack_canary) ____cacheline_aligned;#endif #endif /* X86_64 */
arch/x86/include/asm/stackprotector.h +2 -2
@@ -78,14 +78,14 @@ static __always_inline void boot_init_stack_canary(void)#ifdef CONFIG_X86_64 percpu_write (irq_stack_union.stack_canary, canary);#else -percpu_write (stack_canary, canary); +percpu_write (stack_canary.canary, canary);#endif }static inline void setup_stack_canary_segment (int cpu) {#ifdef CONFIG_X86_32 -unsigned long canary = (unsigned long )&per_cpu (stack_canary, cpu) -20 ; +unsigned long canary = (unsigned long )&per_cpu (stack_canary, cpu);struct desc_struct *gdt_table =get_cpu_gdt_table (cpu);struct desc_struct desc;
arch/x86/include/asm/system.h +1 -1
@@ -31,7 +31,7 @@ void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,"movl %P[task_canary](%[next]), %%ebx\n\t" \ "movl %%ebx, "__percpu_arg([stack_canary])"\n\t"#define __switch_canary_oparam \ - , [stack_canary] "=m" (per_cpu_var(stack_canary)) + , [stack_canary] "=m" (per_cpu_var(stack_canary.canary))#define __switch_canary_iparam \ , [task_canary] "i" (offsetof(struct task_struct, stack_canary))#else /* CC_STACKPROTECTOR */
arch/x86/kernel/amd_iommu.c +0 -2
@@ -485,8 +485,6 @@ void amd_iommu_flush_all_devices(void)int i;for (i =0 ; i <= amd_iommu_last_bdf; ++i) { -if (amd_iommu_pd_table[i] ==NULL ) -continue ; iommu = amd_iommu_rlookup_table[i];if (!iommu)
arch/x86/kernel/apic/es7000_32.c +1 -1
@@ -167,7 +167,7 @@ static int es7000_apic_is_cluster(void) {/* MPENTIUMIII */ if (boot_cpu_data.x86 ==6 && - (boot_cpu_data.x86_model >=7 || boot_cpu_data.x86_model <=11 )) + (boot_cpu_data.x86_model >=7 && boot_cpu_data.x86_model <=11 ))return 1 ;return 0 ;
arch/x86/kernel/cpu/common.c +1 -1
@@ -1043,7 +1043,7 @@ DEFINE_PER_CPU(struct orig_ist, orig_ist);#else /* CONFIG_X86_64 */ #ifdef CONFIG_CC_STACKPROTECTOR -DEFINE_PER_CPU(unsigned long, stack_canary); +DEFINE_PER_CPU(struct stack_canary, stack_canary) ____cacheline_aligned;#endif /* Make sure %fs and %gs are initialized properly in idle threads */
arch/x86/kernel/head_32.S +0 -1
@@ -439,7 +439,6 @@ is386: movl $2,%ecx # set MP jne 1f movl $per_cpu__gdt_page,%eax movl $per_cpu__stack_canary,%ecx - subl $20, %ecx movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax) shrl $16, %ecx movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
arch/x86/kernel/kvm.c +1 -6
@@ -34,7 +34,6 @@struct kvm_para_state {u8 mmu_queue[MMU_QUEUE_SIZE ];int mmu_queue_len; -enum paravirt_lazy_mode mode; }; static DEFINE_PER_CPU(struct kvm_para_state, para_state);
@@ -77,7 +76,7 @@ static void kvm_deferred_mmu_op(void *buffer, int len) {struct kvm_para_state *state =kvm_para_state (); -if (state->mode !=PARAVIRT_LAZY_MMU ) { +if (paravirt_get_lazy_mode () !=PARAVIRT_LAZY_MMU ) {kvm_mmu_op (buffer, len);return ; }
@@ -185,10 +184,7 @@ static void kvm_release_pt(unsigned long pfn)static void kvm_enter_lazy_mmu (void ) { -struct kvm_para_state *state =kvm_para_state (); -paravirt_enter_lazy_mmu (); - state->mode =paravirt_get_lazy_mode (); }static void kvm_leave_lazy_mmu (void )
@@ -197,7 +193,6 @@ static void kvm_leave_lazy_mmu(void)mmu_queue_flush (state);paravirt_leave_lazy_mmu (); - state->mode =paravirt_get_lazy_mode (); }static void __init paravirt_ops_setup (void )
arch/x86/kernel/kvmclock.c +2 -2
@@ -50,8 +50,8 @@ static unsigned long kvm_get_wallclock(void)struct timespec ts;int low, high; - low = (int )__pa (&wall_clock); - high = ((u64 )__pa (&wall_clock) >>32 ); + low = (int )__pa_symbol (&wall_clock); + high = ((u64 )__pa_symbol (&wall_clock) >>32 );native_write_msr (MSR_KVM_WALL_CLOCK , low, high); vcpu_time = &get_cpu_var (hv_clock);
arch/x86/kvm/lapic.c +9 -0
@@ -573,6 +573,15 @@ static void start_apic_timer(struct kvm_lapic *apic)if (!apic->lapic_timer.period)return ; +/* +* Do not allow the guest to program periodic timers with small +* interval, since the hrtimers are not throttled by the host +* scheduler. +*/ +if (apic_lvtt_period (apic)) { +if (apic->lapic_timer.period <NSEC_PER_MSEC /2 ) + apic->lapic_timer.period =NSEC_PER_MSEC /2 ; + } hrtimer_start(&apic->lapic_timer.timer, ktime_add_ns(now, apic->lapic_timer.period),
arch/x86/kvm/mmu.c +2 -1
@@ -2633,7 +2633,8 @@ EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt);void __kvm_mmu_free_some_pages (struct kvm_vcpu *vcpu) { -while (vcpu->kvm->arch.n_free_mmu_pages <KVM_REFILL_PAGES ) { +while (vcpu->kvm->arch.n_free_mmu_pages <KVM_REFILL_PAGES && + !list_empty (&vcpu->kvm->arch.active_mmu_pages)) {struct kvm_mmu_page *sp; sp = container_of(vcpu->kvm->arch.active_mmu_pages.prev,
arch/x86/kvm/vmx.c +5 -6
@@ -1217,12 +1217,9 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)if (_cpu_based_2nd_exec_control &SECONDARY_EXEC_ENABLE_EPT ) {/* CR3 accesses and invlpg don't need to cause VM Exits when EPT enabled */ - min &= ~(CPU_BASED_CR3_LOAD_EXITING | -CPU_BASED_CR3_STORE_EXITING | -CPU_BASED_INVLPG_EXITING ); -if (adjust_vmx_controls (min, opt,MSR_IA32_VMX_PROCBASED_CTLS , - &_cpu_based_exec_control) <0 ) -return -EIO ; + _cpu_based_exec_control &= ~(CPU_BASED_CR3_LOAD_EXITING | +CPU_BASED_CR3_STORE_EXITING | +CPU_BASED_INVLPG_EXITING );rdmsr (MSR_IA32_VMX_EPT_VPID_CAP , vmx_capability.ept, vmx_capability.vpid); }
@@ -2841,6 +2838,8 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)unsigned long val;int dr, reg; +if (!kvm_require_cpl (vcpu,0 )) +return 1 ; dr =vmcs_readl (GUEST_DR7 );if (dr &DR7_GD ) {/*
arch/x86/kvm/x86.c +19 -0
@@ -215,6 +215,19 @@ static void __queue_exception(struct kvm_vcpu *vcpu) }/* +* Checks if cpl <= required_cpl; if true, return true. Otherwise queue +* a #GP and return false. +*/ +bool kvm_require_cpl (struct kvm_vcpu *vcpu,int required_cpl) +{ +if (kvm_x86_ops->get_cpl (vcpu) <= required_cpl) +return true; +kvm_queue_exception_e (vcpu,GP_VECTOR ,0 ); +return false; +} +EXPORT_SYMBOL_GPL (kvm_require_cpl); + +/* * Load the pae pdptrs. Return true is they are all valid. */ int load_pdptrs (struct kvm_vcpu *vcpu,unsigned long cr3)
@@ -2898,6 +2911,11 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu) a3 &=0xFFFFFFFF ; } +if (kvm_x86_ops->get_cpl (vcpu) !=0 ) { + ret = -KVM_EPERM ; + goto out; + } +switch (nr) {case KVM_HC_VAPIC_POLL_IRQ : ret =0 ;
@@ -2909,6 +2927,7 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu) ret = -KVM_ENOSYS ;break ; } +out:kvm_register_write (vcpu,VCPU_REGS_RAX , ret); ++vcpu->stat.hypercalls;return r;
arch/x86/kvm/x86_emulate.c +16 -1
@@ -60,6 +60,7 @@#define SrcImmByte (6<<4)/* 8-bit sign-extended immediate operand. */ #define SrcOne (7<<4)/* Implied '1' */ #define SrcImmUByte (8<<4)/* 8-bit unsigned immediate operand. */ +#define SrcImmU (9<<4)/* Immediate operand, unsigned */ #define SrcMask (0xf<<4)/* Generic ModRM decode. */ #define ModRM (1<<8)
@@ -195,7 +196,7 @@ static u32 opcode_table[256] = { ByteOp | SrcImmUByte, SrcImmUByte,/* 0xE8 - 0xEF */ SrcImm | Stack, SrcImm | ImplicitOps, - SrcImm | Src2Imm16, SrcImmByte | ImplicitOps, + SrcImmU | Src2Imm16, SrcImmByte | ImplicitOps, SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps, SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,/* 0xF0 - 0xF7 */
@@ -1027,6 +1028,7 @@ done_prefixes: c->src.type =OP_MEM ;break ;case SrcImm: +case SrcImmU: c->src.type =OP_IMM ; c->src.ptr = (unsigned long *)c->eip; c->src.bytes = (c->d & ByteOp) ?1 : c->op_bytes;
@@ -1044,6 +1046,19 @@ done_prefixes: c->src.val =insn_fetch (s32,4 , c->eip);break ; } +if ((c->d & SrcMask) == SrcImmU) { +switch (c->src.bytes) { +case 1 : + c->src.val &=0xff ; +break ; +case 2 : + c->src.val &=0xffff ; +break ; +case 4 : + c->src.val &=0xffffffff ; +break ; + } + }break ;case SrcImmByte:case SrcImmUByte:
arch/x86/mm/pageattr.c +7 -1
@@ -822,6 +822,7 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages, {struct cpa_data cpa;int ret, cache, checkalias; +unsigned long baddr =0 ;/* * Check, if we are requested to change a not supported
@@ -853,6 +854,11 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,*/ WARN_ON_ONCE (1 ); } +/* +* Save address for cache flush. *addr is modified in the call +* to __change_page_attr_set_clr() below. +*/ + baddr = *addr; }/* Must avoid aliasing mappings in the highmem code */
@@ -900,7 +906,7 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,cpa_flush_array (addr, numpages, cache, cpa.flags, pages); }else -cpa_flush_range (*addr, numpages, cache); +cpa_flush_range (baddr, numpages, cache); }else cpa_flush_all (cache);
block/blk-sysfs.c +6 -1
@@ -40,7 +40,12 @@ queue_requests_store(struct request_queue *q, const char *page, size_t count) {struct request_list *rl = &q->rq;unsigned long nr; -int ret =queue_var_store (&nr, page, count); +int ret; + +if (!q->request_fn) +return -EINVAL ; + + ret =queue_var_store (&nr, page, count);if (nr <BLKDEV_MIN_RQ ) nr =BLKDEV_MIN_RQ ;
drivers/ata/libata-core.c +7 -1
@@ -709,7 +709,13 @@ u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev) head = tf->device &0xf ; sect = tf->lbal; - block = (cyl * dev->heads + head) * dev->sectors + sect; +if (!sect) { +ata_dev_printk (dev,KERN_WARNING ,"device reported " +"invalid CHS sector 0\n" ); + sect =1 ;/* oh well */ + } + + block = (cyl * dev->heads + head) * dev->sectors + sect -1 ; }return block;
drivers/char/agp/intel-agp.c +0 -9
@@ -2313,15 +2313,6 @@ static int agp_intel_resume(struct pci_dev *pdev)struct agp_bridge_data *bridge =pci_get_drvdata (pdev);int ret_val; -pci_restore_state (pdev); - -/* We should restore our graphics device's config space, -* as host bridge (00:00) resumes before graphics device (02:00), -* then our access to its pci space can work right. -*/ -if (intel_private.pcidev) -pci_restore_state (intel_private.pcidev); -if (bridge->driver == &intel_generic_driver)intel_configure ();else if (bridge->driver == &intel_850_driver)
drivers/char/tpm/tpm_tis.c +6 -6
@@ -450,6 +450,12 @@ static int tpm_tis_init(struct device *dev, resource_size_t start, goto out_err; } +/* Default timeouts */ + chip->vendor.timeout_a =msecs_to_jiffies (TIS_SHORT_TIMEOUT ); + chip->vendor.timeout_b =msecs_to_jiffies (TIS_LONG_TIMEOUT ); + chip->vendor.timeout_c =msecs_to_jiffies (TIS_SHORT_TIMEOUT ); + chip->vendor.timeout_d =msecs_to_jiffies (TIS_SHORT_TIMEOUT ); +if (request_locality (chip,0 ) !=0 ) { rc = -ENODEV ; goto out_err;
@@ -457,12 +463,6 @@ static int tpm_tis_init(struct device *dev, resource_size_t start, vendor =ioread32 (chip->vendor.iobase +TPM_DID_VID (0 )); -/* Default timeouts */ - chip->vendor.timeout_a =msecs_to_jiffies (TIS_SHORT_TIMEOUT ); - chip->vendor.timeout_b =msecs_to_jiffies (TIS_LONG_TIMEOUT ); - chip->vendor.timeout_c =msecs_to_jiffies (TIS_SHORT_TIMEOUT ); - chip->vendor.timeout_d =msecs_to_jiffies (TIS_SHORT_TIMEOUT ); -dev_info (dev,"1.2 TPM (device-id 0x%X, rev-id %d)\n" , vendor >>16 ,ioread8 (chip->vendor.iobase +TPM_RID (0 )));
drivers/md/dm-log-userspace-base.c +1 -1
@@ -582,7 +582,7 @@ static int userspace_status(struct dm_dirty_log *log, status_type_t status_type,break ;case STATUSTYPE_TABLE : sz =0 ; - table_args =strstr (lc->usr_argv_str," " ); + table_args =strchr (lc->usr_argv_str,' ' );BUG_ON (!table_args);/* There will always be a ' ' */ table_args++;
drivers/net/mlx4/eq.c +0 -42
48 lines not on this page · raw message
drivers/net/mlx4/main.c +6 -3
@@ -525,7 +525,10 @@ static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap, goto err_unmap_aux; } - err =mlx4_map_eq_icm (dev, init_hca->eqc_base); + err =mlx4_init_icm_table (dev, &priv->eq_table.table, + init_hca->eqc_base, dev_cap->eqc_entry_sz, + dev->caps.num_eqs, dev->caps.num_eqs, +0 ,0 );if (err) {mlx4_err (dev,"Failed to map EQ context memory, aborting.\n" ); goto err_unmap_cmpt;
@@ -668,7 +671,7 @@ err_unmap_mtt:mlx4_cleanup_icm_table (dev, &priv->mr_table.mtt_table); err_unmap_eq: -mlx4_unmap_eq_icm (dev); +mlx4_cleanup_icm_table (dev, &priv->eq_table.table); err_unmap_cmpt:mlx4_cleanup_icm_table (dev, &priv->eq_table.cmpt_table);
@@ -698,11 +701,11 @@ static void mlx4_free_icms(struct mlx4_dev *dev)mlx4_cleanup_icm_table (dev, &priv->qp_table.qp_table);mlx4_cleanup_icm_table (dev, &priv->mr_table.dmpt_table);mlx4_cleanup_icm_table (dev, &priv->mr_table.mtt_table); +mlx4_cleanup_icm_table (dev, &priv->eq_table.table);mlx4_cleanup_icm_table (dev, &priv->eq_table.cmpt_table);mlx4_cleanup_icm_table (dev, &priv->cq_table.cmpt_table);mlx4_cleanup_icm_table (dev, &priv->srq_table.cmpt_table);mlx4_cleanup_icm_table (dev, &priv->qp_table.cmpt_table); -mlx4_unmap_eq_icm (dev);mlx4_UNMAP_ICM_AUX (dev);mlx4_free_icm (dev, priv->fw.aux_icm,0 );
drivers/net/mlx4/mlx4.h +1 -6
@@ -205,9 +205,7 @@ struct mlx4_eq_table {void __iomem **uar_map;u32 clr_mask;struct mlx4_eq *eq; -u64 icm_virt; -struct page *icm_page; -dma_addr_t icm_dma; +struct mlx4_icm_table table;struct mlx4_icm_table cmpt_table;int have_irq;u8 inta_pin;
@@ -373,9 +371,6 @@ u64 mlx4_make_profile(struct mlx4_dev *dev,struct mlx4_dev_cap *dev_cap, struct mlx4_init_hca_param *init_hca); -int mlx4_map_eq_icm (struct mlx4_dev *dev,u64 icm_virt); -void mlx4_unmap_eq_icm (struct mlx4_dev *dev); -int mlx4_cmd_init (struct mlx4_dev *dev);void mlx4_cmd_cleanup (struct mlx4_dev *dev);void mlx4_cmd_event (struct mlx4_dev *dev,u16 token,u8 status,u64 out_param);
drivers/net/wireless/ath/ath5k/base.c +1 -1
@@ -2676,7 +2676,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan) sc->curchan = chan; sc->curband = &sc->sbands[chan->band]; } - ret =ath5k_hw_reset (ah, sc->opmode, sc->curchan, true); + ret =ath5k_hw_reset (ah, sc->opmode, sc->curchan, chan !=NULL );if (ret) {ATH5K_ERR (sc,"can't reset hardware (%d)\n" , ret); goto err;
drivers/pci/quirks.c +4 -0
@@ -1201,6 +1201,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)switch (dev->subsystem_device) {case 0x00b8 :/* Compaq Evo D510 CMT */ case 0x00b9 :/* Compaq Evo D510 SFF */ +case 0x00ba :/* Compaq Evo D510 USDT */ /* Motherboard doesn't have Host bridge * subvendor/subdevice IDs and on-board VGA * controller is disabled if an AGP card is
@@ -2382,8 +2383,10 @@ static void __devinit nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev) }DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk_leaf); +DECLARE_PCI_FIXUP_RESUME_EARLY (PCI_VENDOR_ID_NVIDIA ,PCI_ANY_ID , nv_msi_ht_cap_quirk_leaf);DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_RESUME_EARLY (PCI_VENDOR_ID_AL ,PCI_ANY_ID , nv_msi_ht_cap_quirk_all);static void __devinit quirk_msi_intx_disable_bug (struct pci_dev *dev) {
@@ -2492,6 +2495,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e6, quirk_i82576_sriov);DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_INTEL ,0x10e7 , quirk_i82576_sriov);DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_INTEL ,0x10e8 , quirk_i82576_sriov);DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_INTEL ,0x150a , quirk_i82576_sriov); +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_INTEL ,0x150d , quirk_i82576_sriov);#endif /* CONFIG_PCI_IOV */
drivers/ps3/ps3stor_lib.c +62 -3
89 lines not on this page · raw message
drivers/scsi/libsrp.c +1 -0
@@ -124,6 +124,7 @@ static void srp_ring_free(struct device *dev, struct srp_buf **ring, size_t max,dma_free_coherent (dev, size, ring[i]->buf, ring[i]->dma);kfree (ring[i]); } +kfree (ring); } int srp_target_alloc(struct srp_target *target, struct device *dev,
drivers/scsi/mpt2sas/mpt2sas_base.c +11 -12
@@ -94,7 +94,7 @@ _base_fault_reset_work(struct work_struct *work)int rc;spin_lock_irqsave (&ioc->ioc_reset_in_progress_lock, flags); -if (ioc->ioc_reset_in_progress) +if (ioc->shost_recovery) goto rearm_timer;spin_unlock_irqrestore (&ioc->ioc_reset_in_progress_lock, flags);
@@ -1542,6 +1542,8 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) (ioc->bios_pg3.BiosVersion &0x0000FF00 ) >>8 , ioc->bios_pg3.BiosVersion & 0x000000FF); +_base_display_dell_branding (ioc); +printk (MPT2SAS_INFO_FMT "Protocol=(" , ioc->name);if (ioc->facts.ProtocolFlags &MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR ) {
@@ -1554,8 +1556,6 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) i++; } -_base_display_dell_branding (ioc); - i =0 ;printk ("), " );printk ("Capabilities=(" );
@@ -1627,6 +1627,9 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)u32 iounit_pg1_flags;mpt2sas_config_get_manufacturing_pg0 (ioc, &mpi_reply, &ioc->manu_pg0); +if (ioc->ir_firmware) +mpt2sas_config_get_manufacturing_pg10 (ioc, &mpi_reply, + &ioc->manu_pg10);mpt2sas_config_get_bios_pg2 (ioc, &mpi_reply, &ioc->bios_pg2);mpt2sas_config_get_bios_pg3 (ioc, &mpi_reply, &ioc->bios_pg3);mpt2sas_config_get_ioc_pg8 (ioc, &mpi_reply, &ioc->ioc_pg8);
@@ -3501,20 +3504,13 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, __func__));spin_lock_irqsave (&ioc->ioc_reset_in_progress_lock, flags); -if (ioc->ioc_reset_in_progress) { +if (ioc->shost_recovery) {spin_unlock_irqrestore (&ioc->ioc_reset_in_progress_lock, flags);printk (MPT2SAS_ERR_FMT "%s: busy\n" , ioc->name, __func__);return -EBUSY ; } - ioc->ioc_reset_in_progress =1 ; ioc->shost_recovery =1 ; -if (ioc->shost->shost_state ==SHOST_RUNNING ) { -/* set back to SHOST_RUNNING in mpt2sas_scsih.c */ -scsi_host_set_state (ioc->shost,SHOST_RECOVERY ); -printk (MPT2SAS_INFO_FMT "putting controller into " -"SHOST_RECOVERY\n" , ioc->name); - }spin_unlock_irqrestore (&ioc->ioc_reset_in_progress_lock, flags);_base_reset_handler (ioc,MPT2_IOC_PRE_RESET );
@@ -3534,7 +3530,10 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED")));spin_lock_irqsave (&ioc->ioc_reset_in_progress_lock, flags); - ioc->ioc_reset_in_progress =0 ; + ioc->shost_recovery =0 ;spin_unlock_irqrestore (&ioc->ioc_reset_in_progress_lock, flags); + +if (!r) +_base_reset_handler (ioc,MPT2_IOC_RUNNING );return r; }
drivers/scsi/mpt2sas/mpt2sas_base.h +40 -3
96 lines not on this page · raw message
drivers/scsi/mpt2sas/mpt2sas_config.c +61 -0
67 lines not on this page · raw message
drivers/scsi/mpt2sas/mpt2sas_ctl.c +2 -14
@@ -1963,7 +1963,6 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg) {enum block_state state;long ret = -EINVAL ; -unsigned long flags; state = (file->f_flags &O_NONBLOCK ) ?NON_BLOCKING :BLOCKING ;
@@ -1989,13 +1988,8 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg) !ioc)return -ENODEV ; -spin_lock_irqsave (&ioc->ioc_reset_in_progress_lock, flags); -if (ioc->shost_recovery) { -spin_unlock_irqrestore (&ioc->ioc_reset_in_progress_lock, - flags); +if (ioc->shost_recovery)return -EAGAIN ; - } -spin_unlock_irqrestore (&ioc->ioc_reset_in_progress_lock, flags);if (_IOC_SIZE (cmd) ==sizeof (struct mpt2_ioctl_command )) { uarg = arg;
@@ -2098,7 +2092,6 @@ _ctl_compat_mpt_command(struct file *file, unsigned cmd, unsigned long arg)struct mpt2_ioctl_command karg;struct MPT2SAS_ADAPTER *ioc;enum block_state state; -unsigned long flags;if (_IOC_SIZE (cmd) !=sizeof (struct mpt2_ioctl_command32 ))return -EINVAL ;
@@ -2113,13 +2106,8 @@ _ctl_compat_mpt_command(struct file *file, unsigned cmd, unsigned long arg)if (_ctl_verify_adapter (karg32.hdr.ioc_number, &ioc) ==-1 || !ioc)return -ENODEV ; -spin_lock_irqsave (&ioc->ioc_reset_in_progress_lock, flags); -if (ioc->shost_recovery) { -spin_unlock_irqrestore (&ioc->ioc_reset_in_progress_lock, - flags); +if (ioc->shost_recovery)return -EAGAIN ; - } -spin_unlock_irqrestore (&ioc->ioc_reset_in_progress_lock, flags);memset (&karg,0 ,sizeof (struct mpt2_ioctl_command )); karg.hdr.ioc_number = karg32.hdr.ioc_number;
drivers/scsi/mpt2sas/mpt2sas_scsih.c +95 -112
362 lines not on this page · raw message
drivers/scsi/mpt2sas/mpt2sas_transport.c +17 -12
@@ -140,11 +140,18 @@ _transport_set_identify(struct MPT2SAS_ADAPTER *ioc, u16 handle,u32 device_info;u32 ioc_status; +if (ioc->shost_recovery) { +printk (MPT2SAS_INFO_FMT "%s: host reset in progress!\n" , + __func__, ioc->name); +return -EFAULT ; + } +if ((mpt2sas_config_get_sas_device_pg0 (ioc, &mpi_reply, &sas_device_pg0,MPI2_SAS_DEVICE_PGAD_FORM_HANDLE , handle))) {printk (MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n" , + ioc->name, __FILE__, __LINE__, __func__); -return -1 ; +return -ENXIO ; } ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
@@ -153,7 +160,7 @@ _transport_set_identify(struct MPT2SAS_ADAPTER *ioc, u16 handle,printk (MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)" "\nfailure at %s:%d/%s()!\n" , ioc->name, handle, ioc_status, __FILE__, __LINE__, __func__); -return -1 ; +return -EIO ; }memset (identify,0 ,sizeof (identify));
@@ -288,21 +295,17 @@ _transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,void *psge;u32 sgl_flags;u8 issue_reset =0 ; -unsigned long flags;void *data_out =NULL ;dma_addr_t data_out_dma;u32 sz;u64 *sas_address_le;u16 wait_state_count; -spin_lock_irqsave (&ioc->ioc_reset_in_progress_lock, flags); -if (ioc->ioc_reset_in_progress) { -spin_unlock_irqrestore (&ioc->ioc_reset_in_progress_lock, flags); +if (ioc->shost_recovery) {printk (MPT2SAS_INFO_FMT "%s: host reset in progress!\n" , __func__, ioc->name);return -EFAULT ; } -spin_unlock_irqrestore (&ioc->ioc_reset_in_progress_lock, flags);mutex_lock (&ioc->transport_cmds.mutex);
@@ -806,6 +809,12 @@ mpt2sas_transport_update_phy_link_change(struct MPT2SAS_ADAPTER *ioc,struct _sas_node *sas_node;struct _sas_phy *mpt2sas_phy; +if (ioc->shost_recovery) { +printk (MPT2SAS_INFO_FMT "%s: host reset in progress!\n" , + __func__, ioc->name); +return ; + } +spin_lock_irqsave (&ioc->sas_node_lock, flags); sas_node =_transport_sas_node_find_by_handle (ioc, handle);spin_unlock_irqrestore (&ioc->sas_node_lock, flags);
@@ -1025,7 +1034,6 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,void *psge;u32 sgl_flags;u8 issue_reset =0 ; -unsigned long flags;dma_addr_t dma_addr_in =0 ;dma_addr_t dma_addr_out =0 ;u16 wait_state_count;
@@ -1045,14 +1053,11 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,return -EINVAL ; } -spin_lock_irqsave (&ioc->ioc_reset_in_progress_lock, flags); -if (ioc->ioc_reset_in_progress) { -spin_unlock_irqrestore (&ioc->ioc_reset_in_progress_lock, flags); +if (ioc->shost_recovery) {printk (MPT2SAS_INFO_FMT "%s: host reset in progress!\n" , __func__, ioc->name);return -EFAULT ; } -spin_unlock_irqrestore (&ioc->ioc_reset_in_progress_lock, flags); rc =mutex_lock_interruptible (&ioc->transport_cmds.mutex);if (rc)
drivers/scsi/sd.c +2 -0
@@ -2021,6 +2021,7 @@ static void sd_probe_async(void *data, async_cookie_t cookie)sd_printk (KERN_NOTICE , sdkp,"Attached SCSI %sdisk\n" , sdp->removable ?"removable " :"" ); +put_device (&sdkp->dev); }/**
@@ -2106,6 +2107,7 @@ static int sd_probe(struct device *dev)get_device (&sdp->sdev_gendev); +get_device (&sdkp->dev);/* prevent release before async_schedule */ async_schedule (sd_probe_async, sdkp);return 0 ;
drivers/scsi/sg.c +1 -1
@@ -1811,7 +1811,7 @@ retry:return 0 ; out:for (i =0 ; i < k; i++) -__free_pages (schp->pages[k], order); +__free_pages (schp->pages[i], order);if (--order >=0 ) goto retry;
fs/binfmt_elf.c +14 -14
@@ -501,22 +501,22 @@ static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex, } } -/* -* Now fill out the bss section. First pad the last page up -* to the page boundary, and then perform a mmap to make sure -* that there are zero-mapped pages up to and including the -* last bss page. -*/ -if (padzero (elf_bss)) { - error = -EFAULT ; - goto out_close; - } +if (last_bss > elf_bss) { +/* +* Now fill out the bss section. First pad the last page up +* to the page boundary, and then perform a mmap to make sure +* that there are zero-mapped pages up to and including the +* last bss page. +*/ +if (padzero (elf_bss)) { + error = -EFAULT ; + goto out_close; + } -/* What we have mapped so far */ - elf_bss =ELF_PAGESTART (elf_bss +ELF_MIN_ALIGN -1 ); +/* What we have mapped so far */ + elf_bss =ELF_PAGESTART (elf_bss +ELF_MIN_ALIGN -1 ); -/* Map the last of the bss segment */ -if (last_bss > elf_bss) { +/* Map the last of the bss segment */ down_write (¤t->mm->mmap_sem); error =do_brk (elf_bss, last_bss - elf_bss);up_write (¤t->mm->mmap_sem);
include/linux/kvm_para.h +1 -0
@@ -13,6 +13,7 @@#define KVM_ENOSYS 1000#define KVM_EFAULT EFAULT#define KVM_E2BIG E2BIG +#define KVM_EPERM EPERM#define KVM_HC_VAPIC_POLL_IRQ 1#define KVM_HC_MMU_OP 2
ipc/shm.c +1 -1
@@ -410,7 +410,7 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params)return error; no_id: -if (shp->mlock_user)/* shmflg & SHM_HUGETLB case */ +if (is_file_hugepages (file) && shp->mlock_user)user_shm_unlock (size, shp->mlock_user);fput (file); no_file:
kernel/perf_counter.c +31 -13
92 lines not on this page · raw message
net/wireless/scan.c +1 -1
@@ -97,7 +97,7 @@ void cfg80211_bss_expire(struct cfg80211_registered_device *dev) dev->bss_generation++; } -static u8 *find_ie (u8 num,u8 *ies,size_t len) +static u8 *find_ie (u8 num,u8 *ies,int len) {while (len >2 && ies[0 ] != num) { len -= ies[1 ] +2 ;
sound/pci/cs46xx/cs46xx_lib.h +1 -1
@@ -35,7 +35,7 @@#ifdef CONFIG_SND_CS46XX_NEW_DSP -#define CS46XX_MIN_PERIOD_SIZE 1 +#define CS46XX_MIN_PERIOD_SIZE 64#define CS46XX_MAX_PERIOD_SIZE 1024*1024#else #define CS46XX_MIN_PERIOD_SIZE 2048
sound/pci/oxygen/oxygen_io.c +1 -10
@@ -215,17 +215,8 @@ EXPORT_SYMBOL(oxygen_write_spi);void oxygen_write_i2c (struct oxygen *chip,u8 device,u8 map,u8 data) { -unsigned long timeout; -/* should not need more than about 300 us */ - timeout = jiffies +msecs_to_jiffies (1 ); -do { -if (!(oxygen_read16 (chip,OXYGEN_2WIRE_BUS_STATUS ) - &OXYGEN_2WIRE_BUSY )) -break ; -udelay (1 ); -cond_resched (); - }while (time_after_eq (timeout, jiffies)); +msleep (1 );oxygen_write8 (chip,OXYGEN_2WIRE_MAP , map);oxygen_write8 (chip,OXYGEN_2WIRE_DATA , data);
sound/soc/codecs/wm8350.c +1 -1
@@ -613,7 +613,7 @@ SOC_DAPM_SINGLE("Switch", WM8350_BEEP_VOLUME, 15, 1, 1);/* Out4 Capture Mux */ static const struct snd_kcontrol_new wm8350_out4_capture_controls = -SOC_DAPM_ENUM ("Route" , wm8350_enum[8 ]); +SOC_DAPM_ENUM ("Route" , wm8350_enum[7 ]);static const struct snd_soc_dapm_widget wm8350_dapm_widgets[] = {
tools/perf/builtin-stat.c +69 -101
249 lines not on this page · raw message
virt/kvm/ioapic.c +2 -0
@@ -188,6 +188,8 @@ int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level)if ((edge && old_irr != ioapic->irr) || (!edge && !entry.fields.remote_irr)) ret =ioapic_service (ioapic, irq); +else + ret =0 ;/* report coalesced interrupt */ } }return ret;
Quoted 2 lines · Greg KH
I'm announcing the release of the 2.6.31.1 kernel. All users of the 2.6.31 kernel series are very strongly encouraged to upgrade.
This is still broken for me. For years, I didn't have a broken kernel. When I booted with 2.6.31, it never reached the login prompt - http://marc.info/?l=linux-kernel&m=125340020804711&w=2
I'd appreciate if anyone can find anything missing in the attached config. I'm also sending a diff from 2.6.30.7.
And
$ sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.
Linux pervalidus 2.6.30.7 #1 SMP PREEMPT Sun Sep 20 13:51:13 BRST 2009 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ AuthenticAMD GNU/Linux
Gnu C 4.3.3 Gnu make 3.81 binutils 2.20.51.0.1.20090905 util-linux 2.16.1 mount support module-init-tools 3.10 e2fsprogs 1.41.9 PPP 2.4.4 Linux C Library 2.9 Dynamic linker (ldd) 2.9 Linux C++ Library 6.0.10 Procps 3.2.7 Net-tools 1.60 Kbd 1.15 Sh-utils 7.4 Modules Loaded radeon drm agpgart af_packet snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss powernow_k8 it87 hwmon_vid ipt_LOG xt_tcpudp iptable_filter ip_tables x_tables fuse joydev hid_a4tech usbhid hid snd_emu10k1 tvaudio snd_rawmidi tda7432 tuner_simple tuner_types snd_ac97_codec ac97_bus snd_pcm tuner snd_seq_device bttv ir_common snd_timer snd_page_alloc snd_util_mem i2c_algo_bit snd_hwdep v4l2_common videodev v4l1_compat ohci_hcd snd ehci_hcd videobuf_dma_sg videobuf_core btcx_risc tveeprom r8169 rtc thermal emu10k1_gp ide_cd_mod usbcore gameport mii i2c_piix4 k8temp pcspkr hwmon i2c_core 8250_pnp 8250 button evdev processor soundcore floppy serial_core cdrom parport_pc parport
В Чтв, 24/09/2009 в 10:40 -0700, Greg KH пишет:
Quoted 2 lines
I'm announcing the release of the 2.6.31.1 kernel. All users of the 2.6.31 kernel series are very strongly encouraged to upgrade.
Looks like the following patch was missed:
http://patchwork.kernel.org/patch/48380/
and link to the thread where it was discussed:
http://lkml.org/lkml/2009/9/17/397
Please, add it to 2.6.31. Thanks.
Signature · 1 line
Peter.
Quoted 2 lines · Greg KH
I'm announcing the release of the 2.6.31.1 kernel. All users of the 2.6.31 kernel series are very strongly encouraged to upgrade.
Stable kernel releases used to be announced on [email protected], but apparently they are not any more; the last version announced there was 2.6.30.5.
Is there an easy way to get informed about new stable kernel releases without having to subscribe to high-volume mailing lists or to poll a website?
Regards,
Sven
Quoted 3 lines · Sven Joachim
Is there an easy way to get informed about new stable kernel releases without having to subscribe to high-volume mailing lists or to poll a website?
Whilst technically still "polling a website" there's an RSS feed on
<http://www.kernel.org/> which I use happily with Google Reader. You do get some 'noise' from the other releases (git snapshots, linux-next releases).
Signature · 4 lines
- Athanasius = Athanasius(at)miggy.org / http://www.miggy.org/
Finger athan(at)fysh.org for PGP key
"And it's me who is my enemy. Me who beats me up.
Me who makes the monsters. Me who strips my confidence." Paula Cole - MEQuoted 9 lines · Athanasius
Quoted 3 lines · Sven Joachim
Is there an easy way to get informed about new stable kernel releases without having to subscribe to high-volume mailing lists or to poll a website?
Whilst technically still "polling a website" there's an RSS feed on
<http://www.kernel.org/> which I use happily with Google Reader. You do get some 'noise' from the other releases (git snapshots, linux-next releases).
Would these feeds work?
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6-stable.git;a=atom
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6-stable.git;a=rss
Signature · 3 lines
Stefan Richter -=====-==--= =--= ==-== http://arcgraph.de/sr/
Quoted 5 lines · Sven Joachim
Quoted 2 lines · Greg KH
I'm announcing the release of the 2.6.31.1 kernel. All users of the 2.6.31 kernel series are very strongly encouraged to upgrade.
Quoted 7 lines
Stable kernel releases used to be announced on [email protected], but apparently they are not any more; the last version announced there was 2.6.30.5.
Is there an easy way to get informed about new stable kernel releases without having to subscribe to high-volume mailing lists or to poll a website?
linux-kernel-announce should work, perhaps something recently broke when the backend kernel-org stuff was changed. Try pinging the kernel.org admins about this.
thanks,
greg k-h
Quoted 11 lines · Peter Volkov
В Чтв, 24/09/2009 в 10:40 -0700, Greg KH пишет:
Quoted 2 lines
I'm announcing the release of the 2.6.31.1 kernel. All users of the 2.6.31 kernel series are very strongly encouraged to upgrade.
Looks like the following patch was missed:
http://patchwork.kernel.org/patch/48380/and link to the thread where it was discussed:
http://lkml.org/lkml/2009/9/17/397Please, add it to 2.6.31. Thanks.
It just didn't make it in time. It is now queued up for the next .31-stable release.
thanks,
greg k-h