Kconfig: STRIP: Remove stale bits of STRIP help text
Subsystems (3)
PATCH 1/1 Kconfig: STRIP: Remove stale bits of STRIP help text
Remove references to dead web site mosquitonet.Stanford.EDU.
Signed-off-by Ralf Baechle <[email protected]>
drivers/net/wireless/Kconfig | 13 ++++++------- 1 files changed, 6 insertions(+), 7 deletions(-)
drivers/net/wireless/Kconfig +6 -7
@@ -31,13 +31,12 @@ config STRIP ---help--- Say Y if you have a Metricom radio and intend to use Starmode Radio IP. STRIP is a radio protocol developed for the MosquitoNet project - (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet - traffic using Metricom radios. Metricom radios are small, battery - powered, 100kbit/sec packet radio transceivers, about the size and - weight of a cellular telephone. (You may also have heard them called - "Metricom modems" but we avoid the term "modem" because it misleads - many people into thinking that you can plug a Metricom modem into a - phone line and use it as a modem.) + to send Internet traffic using Metricom radios. Metricom radios are + small, battery powered, 100kbit/sec packet radio transceivers, about + the size and weight of a cellular telephone. (You may also have heard + them called "Metricom modems" but we avoid the term "modem" because + it misleads many people into thinking that you can plug a Metricom + modem into a phone line and use it as a modem.) You can use STRIP on any Linux machine with a serial port, although it is obviously most useful for people with laptop computers. If you
From: Ralf Baechle <[email protected]>
Date: Thu, 1 Oct 2009 23:48:09 +0200
Quoted 3 lines
Remove references to dead web site mosquitonet.Stanford.EDU.
Signed-off-by Ralf Baechle <[email protected]>
Applied, thank you.