Skip to contentSkip to conversation

seabios: enable io/memory unconditionally

PATCH In review Michael S. Tsirkin 2 participants 3 messages Oct 12, 2009 KVM

lore
Share & tools
lore

Michael S. Tsirkin

author
#0 lore raw

PATCH v2 1/1 seabios: enable io/memory unconditionally

VGA adapters need to claim memory and i/o
transactions even if they do not have any
i/o or memory bars. E.g. PCI spec, page 297,
gives an example of such a device:

Programming interface 0000 0000b
VGA-compatible controller. Memory
addresses 0A 0000h through 0B
FFFFh. I/O addresses 3B0h to 3BBh
and 3C0h to 3DFh and all aliases of
these addresses.

While we could check for these devices and special-case them, it is easier to fix this by enabling i/o and memory space unconditionally:
devices that do not support it will just ignore this setting.

Signed-off-by Michael S. Tsirkin <[email protected]>

---

Changes from v1: build fixes

 src/pciinit.c |   17 ++++++-----------
 1 files changed, 6 insertions(+), 11 deletions(-)
src/pciinit.c +6 -11
index 0d558a9..db70560 100644
@@ -28,7 +28,6 @@ static u8 pci_irqs[4] = {
 
 static void pci_set_io_region_addr(u16 bdf, int region_num, u32 addr)
 {
-    u16 cmd;
     u32 ofs, old_addr;
 
     if (region_num == PCI_ROM_SLOT) {

@@ -41,16 +40,6 @@ static void pci_set_io_region_addr(u16 bdf, int region_num, u32 addr)
 
     pci_config_writel(bdf, ofs, addr);
     dprintf(1, "region %d: 0x%08x\n", region_num, addr);
-
-    /* enable memory mappings */
-    cmd = pci_config_readw(bdf, PCI_COMMAND);
-    if (region_num == PCI_ROM_SLOT)
-        cmd |= PCI_COMMAND_MEMORY;
-    else if (old_addr & PCI_BASE_ADDRESS_SPACE_IO)
-        cmd |= PCI_COMMAND_IO;
-    else
-        cmd |= PCI_COMMAND_MEMORY;
-    pci_config_writew(bdf, PCI_COMMAND, cmd);
 }
 
 /* return the global irq number corresponding to a given device irq

@@ -95,6 +84,7 @@ static void pci_bios_init_device(u16 bdf)
 {
     int class;
     u32 *paddr;
+    u16 cmd;
     int i, pin, pic_irq, vendor_id, device_id;
 
     class = pci_config_readw(bdf, PCI_CLASS_DEVICE);

@@ -165,6 +155,11 @@ static void pci_bios_init_device(u16 bdf)
         break;
     }
 
+    /* enable memory mappings */
+    cmd = pci_config_readw(bdf, PCI_COMMAND);
+    cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+    pci_config_writew(bdf, PCI_COMMAND, cmd);
+
     /* map the interrupt */
     pin = pci_config_readb(bdf, PCI_INTERRUPT_PIN);
     if (pin != 0) {
Signature · 1 line
1.6.5.rc2
#1 lore raw
Quoted 4 lines · Michael S. Tsirkin

VGA adapters need to claim memory and i/o
transactions even if they do not have any
i/o or memory bars. E.g. PCI spec, page 297,
gives an example of such a device:

I've modified your patch slightly (to use new pci_config_maskw helper) and have committed it.

Thanks,
-Kevin

author
#2 lore raw
Quoted 8 lines · Kevin O'Connor
Quoted 4 lines · Michael S. Tsirkin

VGA adapters need to claim memory and i/o
transactions even if they do not have any
i/o or memory bars. E.g. PCI spec, page 297,
gives an example of such a device:

I've modified your patch slightly (to use new pci_config_maskw helper) and have committed it.

Cool. Anthony, could you merge into savannah tree please?

Quoted 2 lines

Thanks,
-Kevin