hwmon:gm965temp for GM/GME965 IGP
PATCH 1/1 hwmon:gm965temp for GM/GME965 IGP
Subject: [PATCH] hwmon:gm965temp add GM/GME965 IGP temperature report.[Ver0]
Intel GM/GME965 has two on-die thermal sensors. Driver support the graphics hot spot temperature report.
Chips GM/GME965 is tested, and seems work. While GM45 and more other desktop chips are not tested, it may be not work for them. So user need to enable flag "TEST_MORE" to test them.
Thanks to Tobias Hain<[email protected]> for helped me to test GM965 chip too, to add desktop chips.
Thanks to Mauro Blanco<[email protected]> for helped me to test GME965 chip.
MODULE_DEVICE_TABLE calling in this path just for test, I am not quit sure about it.
This path waiting for your review, please help me to improve it. Thank you!
---
drivers/hwmon/Kconfig +10 -0
@@ -372,6 +372,16 @@ config SENSORS_GL520SM This driver can also be built as a module. If so, the module will be called gl520sm. +config SENSORS_GM965TEMP + tristate "Intel GM965 temperature sensor" + depends on PCI + help + If you say yes here you get support for GM965 IGP temperatue + sensor. + + This driver can also be built as a module. If so, the module + will be called gm965temp. + config SENSORS_CORETEMP tristate "Intel Core/Core2/Atom temperature sensor" depends on X86 && EXPERIMENTAL
drivers/hwmon/Makefile +1 -0
@@ -46,6 +46,7 @@ obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o obj-$(CONFIG_SENSORS_G760A) += g760a.o obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o +obj-$(CONFIG_SENSORS_GM965TEMP) += gm965temp.o obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
drivers/hwmon/gm965temp.c +517 -0
517 lines not on this page · raw message
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors